Subversion Repositories openrisc

#
#  Config file for the generix RAMiX boards with i960
#
#  $Id: rxgen960.cfg,v 1.2 2001-09-27 12:02:52 chris Exp $
#

include $(RTEMS_ROOT)/make/custom/default.cfg

RTEMS_CPU=i960
RTEMS_CPU_MODEL=i960rp

# This is the actual bsp directory used during the build process.
RTEMS_BSP_FAMILY=rxgen960

#  This contains the compiler options necessary to select the CPU model
#  and (hopefully) optimize for it. 
#
CPU_CFLAGS = -mrp -D__i960RP__ -D__i960_RP__

# -pipe does not work in our local configuration of FSF GCC 2.6.0
# configured on top of Intel Release 2.4.  We did this to replace
# the GCC 2.4.5 shipped with Intel Release 2.4.

# optimize flag: typically -0, could use -O4 or -fast
# -O4 is ok for RTEMS
CFLAGS_OPTIMIZE_V=-O4 -mleaf-procedures

#  This section makes the target dependent options file.

#  NDEBUG (C library)
#     if defined asserts do not generate code.  This is commonly used
#     as a command line option.
#
#  RTEMS_TEST_NO_PAUSE (RTEMS tests)
#     do not pause between screens of output in the rtems tests
#
#  NO_TABLE_MOVE (SPARC PORT)
#     do not have a second trap table -- use the BSP's
#
#  RTEMS_DEBUG (RTEMS)
#     If defined, debug checks in RTEMS and support library code are enabled.

define make-target-options
        @echo "/* #define NDEBUG 1 */ "                     >>$@
        @echo "#define RTEMS_TEST_NO_PAUSE 1"               >>$@
        @echo "/* #define RTEMS_DEBUG  1 */"                >>$@
endef

# The following are definitions of make-exe which will work using ld as
# is currently required.  It is expected that as of gcc 2.8, the end user
# will be able to override parts of the compilers specs and link using gcc.

# ifeq ($(RTEMS_USE_GCC272),yes)
# ar x $(PROJECT_ROOT)/$(RTEMS_BSP_FAMILY)/lib/libbsp.a

# LD_LIBS += $(PROJECT_RELEASE)/lib/libbsp.a

ifeq ($(RTEMS_USE_GCC272),yes)
define make-exe
        @echo "rxgen960 does not support this gcc 2.7.2"
        exit 1
endef
else
define make-exe
        $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -o $@ \
            $(LINK_OBJS) $(LINK_LIBS)
        $(NM) -g -n $@ > $(basename $@).num
        $(OBJCOPY) -oformat binary $@ $(basename $@).bin
        $(SIZE) $@
endef
endif

# Miscellaneous additions go here