Subversion Repositories openrisc_2011-10-31

#
#  Config file for the 7100 pa-risc simulator
#
#  $Id: simhppa.cfg,v 1.2 2001-09-27 12:02:52 chris Exp $
#

include $(RTEMS_ROOT)/make/custom/default.cfg

RTEMS_CPU=hppa1.1
RTEMS_CPU_MODEL=hppa7200

# This is the actual bsp directory used during the build process.
RTEMS_BSP_FAMILY=simhppa

#  This contains the compiler options necessary to select the CPU model
#  and (hopefully) optimize for it.
#
#  Possibles:
#  -mpa-risc-1-1        -- HPPA 1.1 instead of 1.0
#  -mportable-runtime
#
CPU_CFLAGS = -mpa-risc-1-1 -mportable-runtime

# Possibles:
#  -Wall                -- lots of warnings
#  -pipe                -- compiler uses pipes to talk to phases (usually faster)
#  -ansi                -- ANSI C compliance
#  -fasm                -- ANSI, but allow inline assembler
#  -mgas                -- we are using gas as assembler
#  -fno-keep-inline-functions  -- do not emit any inlines as static
CFLAGS_DEFAULT = $(CPU_CFLAGS) -Wall -ansi -fasm -mgas

# optimize flag: typically -0, could use -O4 or -fast
# -O4 is ok for RTEMS
# NOTE: some level of -O may be actually required by inline assembler
CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions

#  This makes the target dependent options file.

#  NDEBUG (C library)
#     if defined asserts do not generate code.  This is commonly used
#     as a command line option.
#
#  RTEMS_TEST_NO_PAUSE (RTEMS tests)
#     do not pause between screens of output in the rtems tests
#
#  RTEMS_DEBUG (RTEMS)
#     If defined, debug checks in RTEMS and support library code are enabled.
#
#  SIMHPPA_FAST_IDLE (simhppa)
#     If defined, speed up the clock ticks while the idle task is running so
#     time spent in the idle task is minimized.  This significantly reduces
#     the wall time required to execute the RTEMS test suites.
#

define make-target-options
        @echo "/* #define NDEBUG 1 */ "                     >>$@
        @echo "#define RTEMS_TEST_NO_PAUSE 1"               >>$@
        @echo "/* #define RTEMS_DEBUG  1 */"                >>$@
        @echo "#define SIMHPPA_FAST_IDLE  1 "               >>$@
endef

#
# GNU ld options
#   `-Tbss ORG'
#   `-Tdata ORG'
#   `-Ttext ORG'
#      Use ORG as the starting address for--respectively--the `bss',
#      `data', or the `text' segment of the output file.  ORG must be a
#      single hexadecimal integer; for compatibility with other linkers,
#      you may omit the leading `0x' usually associated with hexadecimal
#      values.

# 'NODE' is set to 1 or 2 for multi cpu tests (ref: mptests/mp01/node1/Makefile)
# If NODE is set as an environment variable, don't trust it, zero it out.
# (NODE turns out to be a very common environment variable)
ifeq (,$(NODE))
NODE=0
else
ifeq "$(origin NODE)" "environment"
NODE=0
endif
endif

# XXX some/all of this should move into 'linkcmds'
# single processor
DATA_0_BASE=0x40001000
TEXT_0_BASE=0x00001000

# first node (mptests number them from 1)
DATA_1_BASE=$(DATA_0_BASE)
TEXT_1_BASE=$(TEXT_0_BASE)

# second node (mptests number them from 1)
DATA_2_BASE=0x48001000
TEXT_2_BASE=0x08001000

# for hpux ld
#LD_LOC_OPTIONS=-D $(DATA_$(NODE)_BASE) -R $(TEXT_$(NODE)_BASE)
# for gnu ld
LD_LOC_OPTIONS=-Tdata $(DATA_$(NODE)_BASE) -Ttext $(TEXT_$(NODE)_BASE)
GCC_LD_LOC_OPTIONS=-W,l-T -W,ldata -W,l$(DATA_$(NODE)_BASE) \
                   -W,l-T -W,ltext -W,l$(TEXT_$(NODE)_BASE)


# The following are definitions of make-exe which will work using ld as
# is currently required.  It is expected that as of gcc 2.8, the end user
# will be able to override parts of the compilers specs and link using gcc.

ifeq ($(RTEMS_USE_GCC272),yes)
define make-exe
        $(LDARGS) $(LD) $(LD_LOC_OPTIONS) $(XLDFLAGS) -a archive \
            -o $@ -u atexit \
            $(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group
        $(NM) -g -n $@ > $(basename $@).num
        $(SIZE) $@
endef
else
define make-exe
        $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) $(GCC_LD_LOC_OPTIONS) \
            -o $@ \
            $(LINK_OBJS) $(LINK_LIBS)
        $(NM) -g -n $@ > $(basename $@).num
        $(SIZE) $@
endef
endif

# Miscellaneous additions go here

# BSP-specific tools
PRINTDUMP=$(PROJECT_TOOLS)/print_dump