URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [tags/] [nog_patch_67/] [or1ksim/] [testbench/] [int_test.S] - Rev 802
Go to most recent revision | Compare with Previous | Blame | View Log
/* Within the test we'll use following global variables:
r16 interrupt counter
r17 current tick timer comparison counter
r18 sanity counter
r19 loop counter
r20 temp value of SR reg
r21 temp value of TTMR reg.
r23 RAM_START
r25-r31 used by int handler
The test do the following:
We set up the tick timer to trigger once and then we trigger interrupts incrementally
on every cycle in the specified test program; on interrupt handler we check if data computed
so far exactly matches precalculated values. If interrupt has returned incorreclty, we can
detect this using assertion routine at the end.
*/
#include "spr_defs.h"
#define RAM_START 0x40000000
.section .except
.org 0x100
l.j _main
l.nop
.org 0x500
#
# Tick timer exception handler
#
l.addi r31,r3,0
# get interrupted program pc
l.mfspr r25,r0,SPR_EPCR_BASE
# calculate instruction address
l.movhi r26,hi(_ie_start)
l.ori r26,r26,lo(_ie_start)
l.addi r3,r25,0 #print insn index
l.nop 2
l.sub r25,r25,r26
l.addi r3,r25,0 #print insn index
l.nop 2
l.addi r3,r31,0 # restore r3
l.sfeqi r25, 0x00
l.bf _i00
l.sfeqi r25, 0x04
l.bf _i04
l.sfeqi r25, 0x08
l.bf _i08
l.sfeqi r25, 0x0c
l.bf _i0c
l.sfeqi r25, 0x10
l.bf _i10
l.sfeqi r25, 0x14
l.bf _i14
l.sfeqi r25, 0x18
l.bf _i18
l.sfeqi r25, 0x1c
l.bf _i1c
l.sfeqi r25, 0x20
l.bf _i20
l.sfeqi r25, 0x24
l.bf _i24
l.sfeqi r25, 0x28
l.bf _i28
l.sfeqi r25, 0x2c
l.bf _i2c
l.sfeqi r25, 0x30
l.bf _i30
l.sfeqi r25, 0x34
l.bf _i34
l.sfeqi r25, 0x38
l.bf _i38
l.nop
# value not defined
_die:
l.nop 2 #print r3
l.addi r3,r0,0xeeee
l.nop 2
l.addi r3,r0,1
l.nop 1
1:
l.j 1b
l.nop
.section .text
_main:
l.nop
l.addi r3,r0,SPR_SR_SM
l.mtspr r0,r3,SPR_SR
l.nop
#
# set tick counter to initial 3 cycles
#
l.addi r16,r0,0
l.addi r17,r0,1
l.addi r18,r0,0
l.addi r19,r0,0
l.addi r22,r0,0
l.movhi r23,hi(RAM_START)
l.ori r23,r23,lo(RAM_START)
# Set r20 to hold enable tick exception
l.mfspr r20,r0,SPR_SR
l.ori r20,r20,SPR_SR_SM|SPR_SR_TEE|SPR_SR_F
# Set r21 to hold value of TTMR
l.movhi r5,hi(SPR_TTMR_SR | SPR_TTMR_IE)
l.add r21,r5,r17
#
# MAIN LOOP
#
_main_loop:
# reinitialize memory and registers
l.addi r3,r0,0xaaaa
l.addi r9,r0,0xbbbb
l.sw 0(r23),r3
l.sw 4(r23),r9
l.sw 8(r23),r3
# Reinitializes tick timer
l.addi r17,r17,1
l.mtspr r0,r0,SPR_TTCR # set TTCR
l.mtspr r0,r21,SPR_TTMR # set TTMR
l.mtspr r0,r0,SPR_TTCR # set TTCR
l.addi r21,r21,1
# Enable exceptions and interrupts
l.mtspr r0,r20,SPR_SR # set SR
##### TEST CODE #####
_ie_start:
l.movhi r3,0x1234 #00
l.sw 0(r23),r3 #04
l.movhi r3,hi(RAM_START) #08
l.lwz r3,0(r3) #0c
l.movhi r3,hi(RAM_START) #10
l.addi r3,r3,4 #14
l.j 1f #18
l.lwz r3,0(r3) #1c
l.addi r3,r3,1 #20
1:
l.sfeqi r3,0xdead #24
l.jal 2f #28
l.addi r3,r0,0x5678 #2c
_return_addr:
2:
l.bf _die #30
l.sw 8(r23),r3 #34
_ie_end:
l.nop #38
##### END OF TEST CODE #####
# do some testing
l.j _main_loop
l.nop
_i00:
l.sfeqi r3,0xaaaa
l.bnf _die
l.nop
l.j _resume
l.nop
_i04:
l.movhi r26,0x1234
l.sfeq r3,r26
l.bnf _die
l.nop
l.lwz r26,0(r23)
l.sfeqi r26,0xaaaa
l.bnf _die
l.nop
l.j _resume
l.nop
_i08:
l.movhi r26,0x1234
l.sfeq r3,r26
l.bnf _die
l.nop
l.lwz r27,0(r23)
l.sfeq r27,r26
l.bnf _die
l.nop
l.j _resume
l.nop
_i0c:
l.sfeq r3,r23
l.bnf _die
l.nop
l.j _resume
l.nop
_i10:
l.movhi r26,0x1234
l.sfeq r26,r3
l.bnf _die
l.nop
l.j _resume
l.nop
_i14:
l.sfeq r3,r23
l.bnf _die
l.nop
l.j _resume
l.nop
_i18:
l.addi r26,r23,4
l.sfeq r3,r26
l.bnf _die
l.nop
l.j _resume
l.nop
_i1c:
l.j _die
l.nop
_i20:
l.j _die
l.nop
_i24:
l.mfspr r26,r0,SPR_ESR_BASE
l.addi r30,r3,0
l.addi r3,r26,0
l.nop 2
l.addi r3,r30,0
l.andi r26,r26,SPR_SR_F
l.sfeq r26,r0
l.bnf _die
l.nop
l.sfeqi r3,0xbbbb
l.bnf _die
l.nop
l.j _resume
l.nop
_i28:
l.mfspr r26,r0,SPR_ESR_BASE
l.addi r30,r3,0
l.addi r3,r26,0
l.nop 2
l.addi r3,r30,0
l.andi r26,r26,SPR_SR_F
l.sfeq r26,r0
l.bnf _die
l.nop
l.sfeqi r22,1
l.bf _resume
l.addi r22,r0,1
l.sfeqi r9,0xbbbb
l.bnf _die
l.nop
l.j _resume
l.nop
_i2c:
l.movhi r26,hi(_return_addr)
l.ori r26,r26,lo(_return_addr)
l.sfeq r9,r26
l.bnf _die
l.nop
l.sfeqi r3,0xbbbb
l.bnf _die
l.nop
l.j _resume
l.nop
_i30:
l.sfeqi r3,0x5678
l.bnf _die
l.nop
l.j _resume
l.nop
_i34:
l.sfeqi r3,0x5678
l.bnf _die
l.nop
l.lwz r26,8(r23)
l.sfeqi r26,0xaaaa
l.bnf _die
l.nop
l.j _resume
l.nop
_i38:
l.lwz r26,8(r23)
l.sfeqi r26,0x5678
l.bnf _die
l.nop
#
# mark finished ok
#
l.movhi r3,hi(0xdeaddead)
l.ori r3,r3,lo(0xdeaddead)
l.nop 2
l.addi r3,r0,0
l.nop 1
_ok:
l.j _ok
l.nop
_resume:
l.mfspr r27,r0,SPR_ESR_BASE
l.addi r26,r0,SPR_SR_TEE
l.addi r28,r0,-1
l.xor r26,r26,r28
l.and r26,r26,r27
l.mtspr r0,r26,SPR_ESR_BASE
l.rfe
l.addi r3,r3,5 # should not be executed
Go to most recent revision | Compare with Previous | Blame | View Log