Subversion Repositories or1k

/*
 *  This file contains a typical set of register access routines which may be
 *  used with the mg5uart chip if accesses to the chip are as follows:
 *
 *    + registers are accessed as unsigned32's
 *    + registers are only u32-aligned (no address gaps)
 *
 *  COPYRIGHT (c) 1989-2001.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  mg5uart_reg.c,v 1.1 2001/03/14 00:49:17 joel Exp
 */
 
#include <rtems.h>
 
#ifndef _MG5UART_MULTIPLIER
#define _MG5UART_MULTIPLIER 1
#define _MG5UART_NAME(_X) _X
#define _MG5UART_TYPE unsigned32
#endif
 
#define CALCULATE_REGISTER_ADDRESS( _base, _reg ) \
  (_MG5UART_TYPE *)((_base) + ((_reg) * _MG5UART_MULTIPLIER ))
 
/* 
 *  MG5UART Get Register Routine
 */
 
unsigned8 _MG5UART_NAME(mg5uart_get_register)(
  unsigned32  ulCtrlPort,
  unsigned8   ucRegNum
)
{
  _MG5UART_TYPE *port;
 
  port = CALCULATE_REGISTER_ADDRESS( ulCtrlPort, ucRegNum );
 
  return *port;
}
 
/*
 *  MG5UART Set Register Routine
 */
 
void  _MG5UART_NAME(mg5uart_set_register)(
  unsigned32  ulCtrlPort,
  unsigned8   ucRegNum,
  unsigned8   ucData
)
{
  _MG5UART_TYPE *port;
 
  port = CALCULATE_REGISTER_ADDRESS( ulCtrlPort, ucRegNum );
 
  *port = ucData;
}