Subversion Repositories test_project

menuconfig FUSION
        bool "Fusion MPT device support"
        depends on PCI
        ---help---
        Say Y here to get to see options for Fusion Message
        Passing Technology (MPT) drivers.
        This option alone does not add any kernel code.

        If you say N, all options in this submenu will be skipped and disabled.

if FUSION

config FUSION_SPI
        tristate "Fusion MPT ScsiHost drivers for SPI"
        depends on PCI && SCSI
        select SCSI_SPI_ATTRS
        ---help---
          SCSI HOST support for a parallel SCSI host adapters.

          List of supported controllers:

          LSI53C1020
          LSI53C1020A
          LSI53C1030
          LSI53C1035
          ATTO UL4D

config FUSION_FC
        tristate "Fusion MPT ScsiHost drivers for FC"
        depends on PCI && SCSI
        select SCSI_FC_ATTRS
        ---help---
          SCSI HOST support for a Fiber Channel host adapters.

          List of supported controllers:

          LSIFC909
          LSIFC919
          LSIFC919X
          LSIFC929
          LSIFC929X
          LSIFC929XL
          LSIFC949X
          LSIFC949E
          Brocade FC 410/420

config FUSION_SAS
        tristate "Fusion MPT ScsiHost drivers for SAS"
        depends on PCI && SCSI
        select SCSI_SAS_ATTRS
        ---help---
          SCSI HOST support for a SAS host adapters.

          List of supported controllers:

          LSISAS1064
          LSISAS1068
          LSISAS1064E
          LSISAS1068E
          LSISAS1078

config FUSION_MAX_SGE
        int "Maximum number of scatter gather entries (16 - 128)"
        default "128"
        range 16 128
        help
          This option allows you to specify the maximum number of scatter-
          gather entries per I/O. The driver default is 128, which matches
          SCSI_MAX_PHYS_SEGMENTS. However, it may decreased down to 16.
          Decreasing this parameter will reduce memory requirements
          on a per controller instance.

config FUSION_CTL
        tristate "Fusion MPT misc device (ioctl) driver"
        depends on FUSION_SPI || FUSION_FC || FUSION_SAS
        ---help---
          The Fusion MPT misc device driver provides specialized control
          of MPT adapters via system ioctl calls.  Use of ioctl calls to
          the MPT driver requires that you create and use a misc device
          node ala:
          mknod /dev/mptctl c 10 240

          One use of this ioctl interface is to perform an upgrade (reflash)
          of the MPT adapter firmware.  Refer to readme file(s) distributed
          with the Fusion MPT linux driver for additional details.

          If enabled by saying M to this, a driver named: mptctl
          will be compiled.

          If unsure whether you really want or need this, say N.

config FUSION_LAN
        tristate "Fusion MPT LAN driver"
        depends on FUSION_FC && NET_FC
        ---help---
          This module supports LAN IP traffic over Fibre Channel port(s)
          on Fusion MPT compatible hardware (LSIFC9xx chips).
          The physical interface used is defined in RFC 2625.
          Please refer to that document for details.

          Installing this driver requires the knowledge to configure and
          activate a new network interface, "fc0", using standard Linux tools.

          If enabled by saying M to this, a driver named: mptlan
          will be compiled.

          If unsure whether you really want or need this, say N.

config FUSION_LOGGING
        bool "Fusion MPT logging facility"
        ---help---
          This turns on a logging facility that can be used to debug a number
          of Fusion MPT related problems.

          The debug level can be programmed on the fly via SysFS (hex values)

          echo [level] > /sys/class/scsi_host/host#/debug_level

          There are various debug levels that can be found in the source:
          file:drivers/message/fusion/mptdebug.h

endif # FUSION