OpenCores
URL https://opencores.org/ocsvn/test_project/test_project/trunk

Subversion Repositories test_project

[/] [test_project/] [trunk/] [linux_sd_driver/] [drivers/] [net/] [ixp2000/] [enp2611.c] - Rev 62

Compare with Previous | Blame | View Log

/*
 * IXP2400 MSF network device driver for the Radisys ENP2611
 * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
 * Dedicated to Marija Kulikova.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */
 
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
#include <asm/hardware/uengine.h>
#include <asm/mach-types.h>
#include <asm/io.h>
#include "ixpdev.h"
#include "caleb.h"
#include "ixp2400-msf.h"
#include "pm3386.h"
 
/***********************************************************************
 * The Radisys ENP2611 is a PCI form factor board with three SFP GBIC
 * slots, connected via two PMC/Sierra 3386s and an SPI-3 bridge FPGA
 * to the IXP2400.
 *
 *                +-------------+
 * SFP GBIC #0 ---+             |       +---------+
 *                |  PM3386 #0  +-------+         |
 * SFP GBIC #1 ---+             |       | "Caleb" |         +---------+
 *                +-------------+       |         |         |         |
 *                                      | SPI-3   +---------+ IXP2400 |
 *                +-------------+       | bridge  |         |         |
 * SFP GBIC #2 ---+             |       | FPGA    |         +---------+
 *                |  PM3386 #1  +-------+         |
 *                |             |       +---------+
 *                +-------------+
 *              ^                   ^                  ^
 *              | 1.25Gbaud         | 104MHz           | 104MHz
 *              | SERDES ea.        | SPI-3 ea.        | SPI-3
 *
 ***********************************************************************/
static struct ixp2400_msf_parameters enp2611_msf_parameters =
{
	.rx_mode =		IXP2400_RX_MODE_UTOPIA_POS |
				IXP2400_RX_MODE_1x32 |
				IXP2400_RX_MODE_MPHY |
				IXP2400_RX_MODE_MPHY_32 |
				IXP2400_RX_MODE_MPHY_POLLED_STATUS |
				IXP2400_RX_MODE_MPHY_LEVEL3 |
				IXP2400_RX_MODE_RBUF_SIZE_64,
 
	.rxclk01_multiplier =	IXP2400_PLL_MULTIPLIER_16,
 
	.rx_poll_ports =	3,
 
	.rx_channel_mode = {
		IXP2400_PORT_RX_MODE_MASTER |
		IXP2400_PORT_RX_MODE_POS_PHY |
		IXP2400_PORT_RX_MODE_POS_PHY_L3 |
		IXP2400_PORT_RX_MODE_ODD_PARITY |
		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
 
		IXP2400_PORT_RX_MODE_MASTER |
		IXP2400_PORT_RX_MODE_POS_PHY |
		IXP2400_PORT_RX_MODE_POS_PHY_L3 |
		IXP2400_PORT_RX_MODE_ODD_PARITY |
		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
 
		IXP2400_PORT_RX_MODE_MASTER |
		IXP2400_PORT_RX_MODE_POS_PHY |
		IXP2400_PORT_RX_MODE_POS_PHY_L3 |
		IXP2400_PORT_RX_MODE_ODD_PARITY |
		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE,
 
		IXP2400_PORT_RX_MODE_MASTER |
		IXP2400_PORT_RX_MODE_POS_PHY |
		IXP2400_PORT_RX_MODE_POS_PHY_L3 |
		IXP2400_PORT_RX_MODE_ODD_PARITY |
		IXP2400_PORT_RX_MODE_2_CYCLE_DECODE
	},
 
	.tx_mode =		IXP2400_TX_MODE_UTOPIA_POS |
				IXP2400_TX_MODE_1x32 |
				IXP2400_TX_MODE_MPHY |
				IXP2400_TX_MODE_MPHY_32 |
				IXP2400_TX_MODE_MPHY_POLLED_STATUS |
				IXP2400_TX_MODE_MPHY_LEVEL3 |
				IXP2400_TX_MODE_TBUF_SIZE_64,
 
	.txclk01_multiplier =	IXP2400_PLL_MULTIPLIER_16,
 
	.tx_poll_ports =	3,
 
	.tx_channel_mode = {
		IXP2400_PORT_TX_MODE_MASTER |
		IXP2400_PORT_TX_MODE_POS_PHY |
		IXP2400_PORT_TX_MODE_ODD_PARITY |
		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
 
		IXP2400_PORT_TX_MODE_MASTER |
		IXP2400_PORT_TX_MODE_POS_PHY |
		IXP2400_PORT_TX_MODE_ODD_PARITY |
		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
 
		IXP2400_PORT_TX_MODE_MASTER |
		IXP2400_PORT_TX_MODE_POS_PHY |
		IXP2400_PORT_TX_MODE_ODD_PARITY |
		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE,
 
		IXP2400_PORT_TX_MODE_MASTER |
		IXP2400_PORT_TX_MODE_POS_PHY |
		IXP2400_PORT_TX_MODE_ODD_PARITY |
		IXP2400_PORT_TX_MODE_2_CYCLE_DECODE
	}
};
 
struct enp2611_ixpdev_priv
{
	struct ixpdev_priv		ixpdev_priv;
	struct net_device_stats		stats;
};
 
static struct net_device *nds[3];
static struct timer_list link_check_timer;
 
static struct net_device_stats *enp2611_get_stats(struct net_device *dev)
{
	struct enp2611_ixpdev_priv *ip = netdev_priv(dev);
 
	pm3386_get_stats(ip->ixpdev_priv.channel, &(ip->stats));
 
	return &(ip->stats);
}
 
/* @@@ Poll the SFP moddef0 line too.  */
/* @@@ Try to use the pm3386 DOOL interrupt as well.  */
static void enp2611_check_link_status(unsigned long __dummy)
{
	int i;
 
	for (i = 0; i < 3; i++) {
		struct net_device *dev;
		int status;
 
		dev = nds[i];
		if (dev == NULL)
			continue;
 
		status = pm3386_is_link_up(i);
		if (status && !netif_carrier_ok(dev)) {
			/* @@@ Should report autonegotiation status.  */
			printk(KERN_INFO "%s: NIC Link is Up\n", dev->name);
 
			pm3386_enable_tx(i);
			caleb_enable_tx(i);
			netif_carrier_on(dev);
		} else if (!status && netif_carrier_ok(dev)) {
			printk(KERN_INFO "%s: NIC Link is Down\n", dev->name);
 
			netif_carrier_off(dev);
			caleb_disable_tx(i);
			pm3386_disable_tx(i);
		}
	}
 
	link_check_timer.expires = jiffies + HZ / 10;
	add_timer(&link_check_timer);
}
 
static void enp2611_set_port_admin_status(int port, int up)
{
	if (up) {
		caleb_enable_rx(port);
 
		pm3386_set_carrier(port, 1);
		pm3386_enable_rx(port);
	} else {
		caleb_disable_tx(port);
		pm3386_disable_tx(port);
		/* @@@ Flush out pending packets.  */
		pm3386_set_carrier(port, 0);
 
		pm3386_disable_rx(port);
		caleb_disable_rx(port);
	}
}
 
static int __init enp2611_init_module(void)
{ 
	int ports;
	int i;
 
	if (!machine_is_enp2611())
		return -ENODEV;
 
	caleb_reset();
	pm3386_reset();
 
	ports = pm3386_port_count();
	for (i = 0; i < ports; i++) {
		nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
		if (nds[i] == NULL) {
			while (--i >= 0)
				free_netdev(nds[i]);
			return -ENOMEM;
		}
 
		nds[i]->get_stats = enp2611_get_stats;
		pm3386_init_port(i);
		pm3386_get_mac(i, nds[i]->dev_addr);
	}
 
	ixp2400_msf_init(&enp2611_msf_parameters);
 
	if (ixpdev_init(ports, nds, enp2611_set_port_admin_status)) {
		for (i = 0; i < ports; i++)
			if (nds[i])
				free_netdev(nds[i]);
		return -EINVAL;
	}
 
	init_timer(&link_check_timer);
	link_check_timer.function = enp2611_check_link_status;
	link_check_timer.expires = jiffies;
	add_timer(&link_check_timer);
 
	return 0;
}
 
static void __exit enp2611_cleanup_module(void)
{
	int i;
 
	del_timer_sync(&link_check_timer);
 
	ixpdev_deinit();
	for (i = 0; i < 3; i++)
		free_netdev(nds[i]);
}
 
module_init(enp2611_init_module);
module_exit(enp2611_cleanup_module);
MODULE_LICENSE("GPL");
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.