URL
https://opencores.org/ocsvn/w11/w11/trunk
Subversion Repositories w11
[/] [w11/] [tags/] [w11a_V0.5/] [rtl/] [vlib/] [balanced.opt] - Rev 2
Go to most recent revision | Compare with Previous | Blame | View Log
FLOWTYPE = FPGA;
###############################################################
## Filename: balanced.opt
##
## Option File For Xilinx FPGA Implementation Flow
##
## Version: 8.1.1
## $Header: /devl/xcs/repo/env/Jobs/Xflow/data/optionfiles/virtex_fpga_balanced.opt,v 1.14 2004/10/01 22:29:20 rvklair Exp $
###############################################################
#
# Options for Translator
#
# Type "ngdbuild -h" for a detailed list of ngdbuild command line options
#
Program ngdbuild
-p <partname>; # Partname to use - picked from xflow commandline
-nt timestamp; # NGO File generation. Regenerate only when
# source netlist is newer than existing
# NGO file (default)
-intstyle xflow; # Message Reporting Style: ise, xflow, or silent
#-bm <design>.bmm # Block RAM memory map file
<userdesign>; # User design - pick from xflow command line
<design>.ngd; # Name of NGD file. Filebase same as design filebase
End Program ngdbuild
#
# Options for Mapper
#
# Type "map -h <arch>" for a detailed list of map command line options
#
Program map
-o <design>_map.ncd; # Output Mapped ncd file
-intstyle xflow; # Message Reporting Style: ise, xflow, or silent
# -fp <design>.mfp; # Floorplan file
# -gm incremental; # Guide mode
# -timing; # Perform Timing-Driven Packing and Placement
# -ol med; # Map Effort Levels. -ol [std|med|high]
# Note: If -timing is not specified, -ol switch is ignored.
# Device families supported: Virtex2, Virtex2P
<inputdir><design>.ngd; # Input NGD file
<inputdir><design>.pcf; # Physical constraints file
END Program map
#
# Options for Post Map Trace
#
# Type "trce -h" for a detailed list of trce command line options
#
Program post_map_trce
-v 3; # Produce verbose timing report
#-e 3; # Produce error report (limit 3 items/constraint)
-xml <design>_map.twx; # Output XML version of the timing report
-intstyle xflow; # Message Reporting Style: ise, xflow, or silent
#-o <design>_map.twr; # Output trace report file
#-tsi <design>_map.tsi; # Produce Timing Specification Interaction report
#-fastpaths; # Report minimum paths in verbose mode
#-nodatasheet; # Do not create the datasheet section of the report
<inputdir><design>_map.ncd; # Input mapped ncd
<inputdir><design>.pcf; # Physical constraints file
END Program post_map_trce
#
# Options for Place and Route
#
# Type "par -h" for a detailed list of par command line options
#
Program par
-w; # Overwrite existing placed and routed ncd
-ol high; # Overall effort level
-intstyle xflow; # Message Reporting Style: ise, xflow, or silent
# -gm incremental; # Guide mode
<design>_map.ncd; # Input mapped NCD file
<inputdir><design>.ncd; # Output placed and routed NCD
<inputdir><design>.pcf; # Input physical constraints file
END Program par
#
# Options for Post Par Trace
#
# Type "trce -h" for a detailed list of trce command line options
#
Program post_par_trce
-v 3; # Produce verbose timing report
#-e 3; # Produce error report (limit 3 items/constraint)
-intstyle xflow; # Message Reporting Style: ise, xflow, or silent
-xml <design>.twx; # Output XML version of the timing report
#-o <design>.twr; # Output trace report file
#-tsi <design>.tsi; # Produce Timing Specification Interaction report
#-fastpaths; # Report minimum paths in verbose mode
#-nodatasheet; # Do not create the datasheet section of the report
<inputdir><design>.ncd; # Input placed and routed ncd
<inputdir><design>.pcf; # Physical constraints file
END Program post_par_trce
Go to most recent revision | Compare with Previous | Blame | View Log