URL
https://opencores.org/ocsvn/System09/System09/trunk
Subversion Repositories System09
[/] [System09/] [trunk/] [rtl/] [System09_Xess_XSA-3S1000/] [Makefile] - Rev 113
Go to most recent revision | Compare with Previous | Blame | View Log
#===================================================================
# File: Makefile
# Author: David Burnette
# Created: July 5, 2007
#
# Description:
# Makefile to build the System09 by John Kent
#
# This makefile will build John Kent's entire System09 project
# (RTL synthesis and monitor ROMs) and even download the final
# bitstream to the prototype board.
#
# You can use Xilinx ISE interactively to add new RTL source files
# to this project.
#
# Usage:
# Use 'make help' to get a list of options.
#
# Dependencies:
# Depends on makefile fragments in the 'MKFRAGS' directory.
#
# Revision History:
# dgb 2007-07-05 Original version
#
# dgb 2008-04-07 Split out files into fragments. Modified
# ROM source generation to be per src directory.
#
#===================================================================
MKFRAGS := ../../mkfiles
export MKFRAGS
BRAM_TYPE := b16
export BRAM_TYPE
#===================================================================
# User-modifiable variables
#
# This name must match the name of the design in Xilinx ISE (case
# sensitive).
DESIGN_NAME := my_system09
#
# Constraint file (unfortunately it cannot be extracted from ISE)
UCF_FILE := XSA-3S1000.ucf
#
# Technology family (unfortunately it cannot be extracted from ISE)
FAMILY := spartan3
# List of ROM VHDL files
.PHONY: roms
roms:
@$(MAKE) -C ../../Tools/as09
@$(MAKE) -C ../../Tools/s19tovhd
@$(MAKE) -C ../../src/sys09bug sys09xes.vhd
@$(MAKE) -C ../../src/Flex9 flex9ide.vhd
#===================================================================
# You should not need to edit anything below this line
# XESS Tools
ifeq "$(findstring CYGWIN_NT,$(shell uname -s))" "CYGWIN_NT"
XESSPATH := $(shell cygpath "$(XSTOOLS_BIN_DIR)")
else
XESSPATH := $(XSTOOLS_BIN_DIR)
endif
XSLOAD := "$(XESSPATH)/xsload.exe"
include ../../mkfiles/xilinx_rules.mk
#===================================================================
# TARGETS
.PHONY: all
all: bit
.PHONY: bit
bit: roms $(DESIGN_NAME).bit
.PHONY: impact
impact: roms bit do_impact
prom: roms $(DESIGN_NAME).mcs
.PHONY: xsload
xsload: roms $(DESIGN_NAME).bit
@$(ECHO)
@$(ECHO) "======= Downloading bitstream to XSA-3S1000 using XSLOAD (parallel) ="
$(XSLOAD) -p 0 -b xsa-3s1000 -fpga $<
usbxsload.bit: roms $(DESIGN_NAME).bit
@$(ECHO)
@$(ECHO) "======= Generating special bitstream with StartUpClk=JtagClk ========"
$(GREP) -v StartUpClk $(BITGEN_OPTIONS_FILE) >tmp.ut
$(ECHO) "-g StartUpClk:JtagClk" >>tmp.ut
$(BITGEN) $(BITGEN_FLAGS) -f tmp.ut $(DESIGN_NAME).ncd usbxsload.bit
.PHONY: usbxsload
usbxsload: roms usbxsload.bit
@$(ECHO)
@$(ECHO) "======= Downloading bitstream to XSA-3S1000 using XSLOAD (USB) ======"
$(XSLOAD) -usb 0 -b xsa-3s1000 -fpga usbxsload.bit
.PHONY: usbflash0
usbflash0: roms prom $(DESIGN_NAME).bit
$(XSLOAD) -usb 0 -b xsa-3s1000 -flash $(DESIGN_NAME).mcs
.PHONY: help
help:
@$(ECHO) "Use this Makefile to regenerate the entire System09 bitstream"
@$(ECHO) "after modifying any of the source RTL or 6809 assembler code."
@$(ECHO) ""
@$(ECHO) "This makefile uses the following project files from the Xilinx ISE"
@$(ECHO) " $(XST_FILE)"
@$(ECHO) ""
@$(ECHO) "You use Xilinx ISE interactively to add new RTL source files."
@$(ECHO) ""
@$(ECHO) " Availiable targets"
@$(ECHO)
@$(ECHO) " For building all or part of the system:"
@$(ECHO) " roms - Run asm09 and then generate the VHDL RTL rom files"
@$(ECHO) " bit - Rebuild the entire system and generate the bitstream file"
@$(ECHO) " all - Rebuild everything"
@$(ECHO) " prom - Rebuild the entire system and generate an MCS prom file"
@$(ECHO) " exo - Rebuild the entire system and generate an EXO prom file"
@$(ECHO)
@$(ECHO) " For downloading the bitstream to the board:"
@$(ECHO) " xsload - Download the bitstream to the FPGA via XSLOAD"
@$(ECHO) " usbxsload - Download the bitstream to the FPGA via usbXSLOAD"
@$(ECHO) " usbflash0 - Download the bitstream Flash slot 0 via usbXSLOAD"
@$(ECHO) " impact - Download the bitstream to the FPGA via iMPACT"
@$(ECHO)
@$(ECHO) " For project maintenance:"
@$(ECHO) " help - Print this help text"
@$(ECHO) " clean - Clean up the ISE files"
@$(ECHO) " cleanall - Clean up the ISE files and the Tools directories"
@$(ECHO) ""
.PHONY: clean
clean:
-$(MAKE) -C ../../src/sys09bug clean
-$(MAKE) -C ../../src/Flex9 clean
-$(RM) *.ncd *.ngc *.ngd *.twr *.bit *.mcs *.stx *.ucf.untf *.mrp *.ptwx *_map.map
-$(RM) *.ncl *.ngm *.prm *_pad.txt *.twx *.log *.syr *.par *.exo *.xpi *.xrpt *.xml
-$(RM) *.cmd_log *.ngr *.bld *_summary.html *.nc1 *.pcf *.bgn tmp.ut
-$(RM) *.pad *.placed_ncd_tracker *.routed_ncd_tracker *_pad.csv *.drc
-$(RM) *.pad_txt $(DESIGN_NAME)_impact.cmd *.unroutes $(DESIGN_NAME)_vhdl.prj
-$(RMDIR) _ngo _xmsgs xst xlnx_auto_0_xdb xst_tmp_dirs
.PHONY: cleanall
cleanall: clean
-$(MAKE) -C ../../Tools/as09 clean
-$(MAKE) -C ../../Tools/s19tovhd clean
Go to most recent revision | Compare with Previous | Blame | View Log