OpenCores
URL https://opencores.org/ocsvn/artificial_neural_network/artificial_neural_network/trunk

Subversion Repositories artificial_neural_network

[/] [artificial_neural_network/] [trunk/] [ANN_kernel/] [RTL_VHDL_files/] [layerPS_top.vhd] - Rev 8

Go to most recent revision | Compare with Previous | Blame | View Log

----------------------------------------------------------------------------------
-- Company: CEI
-- Engineer: David Aledo
--
-- Create Date:    12:41:19 06/10/2013
-- Design Name:    Configurable ANN
-- Module Name:    layerSP_top - Behavioral
-- Project Name:
-- Target Devices:
-- Tool versions:
-- Description: neuron layer top for artificial neural networks. Parallel input and
--             serial output.
--
-- Dependencies:
--
-- Revision:
-- Revision 0.01 - File Created
-- Additional Comments:
--
----------------------------------------------------------------------------------
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use ieee.numeric_std.all;
 
library work;
use work.wb_init.all; -- initialization package, comment out when not used
 
-- Deprecated XPS library:
--library proc_common_v3_00_a;
--use proc_common_v3_00_a.proc_common_pkg.all; -- Only for simulation ( pad_power2() )
 
entity layerPS_top is
 
   generic
   (
      WBinit  : boolean := false;
      LNum    : natural := 0;   ------- layer number (needed for initialization)
      NumN    : natural := 34;  ------- Number of neurons of the layer
      NumIn   : natural := 27;   ------- Number of inputs of each neuron
      NbitIn  : natural := 8;  ------- Bit width of the input data
      NbitW   : natural := 1;   ------- Bit width of weights and biases
      NbitOut : natural := 8;   ------- Bit width of the output data
      lra_l   : natural := 11;  ------- Layer RAM address length. It should value log2(NumN)+log2(NumIn)
      wra_l   : natural := 5;   ------- Weight RAM address length. It should value log2(NumIn)
      bra_l   : natural := 6;   ------- Bias RAM address length. It should value log2(NumN)
      LSbit   : natural := 6    ------- Less significant bit of the outputs
   );
 
   port
   (
      -- Input ports
      reset   : in  std_logic;
      clk     : in  std_logic;
      run_in  : in  std_logic; -- Start and input data validation
      m_en    : in  std_logic; -- Memory enable (external interface)
      b_sel   : in  std_logic; -- Bias memory select
      m_we    : in  std_logic_vector(((NbitW+7)/8)-1 downto 0);  -- Memory write enable (external interface)
      inputs  : in  std_logic_vector((NbitIn*NumIn)-1 downto 0); -- Input data (parallel)
      wdata   : in  std_logic_vector(NbitW-1 downto 0);  -- Write data of weight and bias memories
      addr    : in  std_logic_vector(lra_l-1 downto 0); -- Address of weight and bias memories
 
      -- Output ports
      run_out : out std_logic; -- Output data validation, run_in for the next layer
      rdata   : out std_logic_vector(NbitW-1 downto 0);  -- Read data of weight and bias memories
      outputs : out std_logic_vector(NbitOut-1 downto 0) -- Output data (serial)
   );
 
end layerPS_top;
 
architecture Behavioral of layerPS_top is
 
   type ramd_type is array (NumN-1 downto 0) of std_logic_vector(NbitW-1 downto 0); -- Optimal: 32 or 64 spaces
   type layer_ram is array (NumIn-1 downto 0) of ramd_type;
   type outm_type is array (NumIn-1 downto 0) of std_logic_vector(NbitW-1 downto 0);
 
   function fw_init(LNum : natural) return layer_ram is
     variable tmp_arr : layer_ram := (others =>(others => (others => '0')));
   begin    
      if WBinit = true then
         for i in 0 to NumIn-1 loop
            for j in 0 to NumN-1 loop
               tmp_arr(i)(j) := w_init(LNum)(i)(j);
            end loop;
         end loop;
      end if;
      return tmp_arr ;
   end fw_init;
 
 
 
 
   function fb_init(LNum : natural) return ramd_type is
      variable tmp_arr : ramd_type := (others => (others => '0')) ;
   begin
      if WBinit = true then
         for i in 0 to NumN-1 loop
           tmp_arr(i) := b_init(LNum)(i);
         end loop;
      end if;
      return tmp_arr;
   end fb_init;
 
   --function fb_init(LNum : natural) return ramd_type is
   --begin
   -- return ramd_type(b_init(LNum));
   --end fb_init;
 
   signal lram  : layer_ram := fw_init(LNum); -- Layer RAM. One RAM per input. It stores the weights
   signal breg  : ramd_type := fb_init(LNum); -- Bias RAM. They can be RAM because they are not accessed simultaneously
   signal outm  : outm_type; -- RAM outputs to be multiplexed into rdata
   signal m_sel : std_logic_vector(NumIn-1 downto 0);   --------- RAM select
   signal Wyb   : std_logic_vector((NbitW*NumIn)-1 downto 0); -- Weight vectors
   signal bias  : std_logic_vector(NbitW-1 downto 0);   -------- Bias
   signal Nouts : std_logic_vector(NbitOut-1 downto 0);   ------ Outputs from neurons
   signal uaddr : unsigned(lra_l-1 downto 0); -- Unsigned address of weight and bias memories
 
   -- SeƱales de control
   signal cont : integer range 0 to NumN-1; -- Neuron counter
   signal cntb : integer range 0 to NumN-1; -- Delayed counter for biases
   signal st  : bit;  ------- State
   signal en1 : std_logic; -- First step enable
   signal en2 : std_logic; -- Second stage enable
   signal en3 : std_logic; -- Shift register enable
   signal en_out : std_logic;
 
   signal input_aux1 : std_logic_vector((NbitIn*NumIn)-1 downto 0);
   signal input_aux2 : std_logic_vector((NbitIn*NumIn)-1 downto 0);
   signal input_aux3 : std_logic_vector((NbitIn*NumIn)-1 downto 0);
begin
 
layerPS_inst: entity work.layerPS
   generic map
   (
      NumN    => NumN,
      NumIn   => NumIn,
      NbitIn  => NbitIn,
      NbitW   => NbitW,
      NbitOut => NbitOut,
      LSbit   => LSbit
   )
   port map
   (
      -- Input ports
      reset  => reset,
      clk    => clk,
      en     => en1,
      en2    => en2,
      en_r   => en3,
      inputs => input_aux2,
      Wyb    => Wyb,
      bias   => bias,
 
      -- Output ports
      en_out  => en_out,
      outputs => Nouts
   );
 
   uaddr <= unsigned(addr(lra_l-1 downto 0));
 
ram_selector:
   process (uaddr(wra_l-1 downto 0),b_sel) -- Bottom part of memory address and b_sel
   begin
      m_sel <= (others => '0'); -- Default
      for i in (NumIn-1) downto 0 loop
         -- The bottom part of memory address selects which RAM
         if ( (to_integer(uaddr(wra_l-1 downto 0)) = i) and (b_sel = '0')) then
            m_sel(i) <= '1'; -- Enables the selected RAM
         end if;
      end loop;
   end process;
 
rams: -- Instence as weight and bias memories as inputs there are in the layer
   for i in (NumIn-1) downto 0 generate
      process (clk)
         variable d : std_logic_vector(NbitW-1 downto 0); -- Beware of elements whose length is not a multiple of 8
      begin
         if (clk'event and clk = '1') then
            if (m_en = '1' and m_sel(i) = '1') then
               for j in ((NbitW+7)/8)-1 downto 0 loop -- we byte to byte
                  if (m_we(j) = '1') then
                     d((8*(j+1))-1 downto 8*j) := wdata((8*(j+1))-1 downto 8*j);
                  else
                     d((8*(j+1))-1 downto 8*j) := lram(i)(to_integer(uaddr(lra_l-1 downto wra_l)))((8*(j+1))-1 downto 8*j);
                  end if;
               end loop;
               -- Top part of weight and bias memory selects weights inside the selected RAM
               lram(i)(to_integer(uaddr(lra_l-1 downto wra_l))) <= d; -- Write
               --
            end if;
         end if;
      end process;
      -- Outpus are read in parallel, resulting in a bus of weights:
      --Wyb((NbitW*(i+1))-1 downto NbitW*i) <= lram(i)(cont); -- Asynchronous read (forces distributed RAM)
      process (clk) -- Synchronous read
      begin
         if clk'event and clk = '1' then
            if reset = '1' then
               --Wyb((NbitW*(i+1))-1 downto NbitW*i) <= (others => '0');
            else
               Wyb((NbitW*(i+1))-1 downto NbitW*i) <= lram(i)(cont);
            end if;
         end if;
      end process;
      outm(i) <= lram(i)(to_integer(uaddr(lra_l-1 downto wra_l))); -- Read all RAM
   end generate;
 
   -- Synchronous read including breg:
   process (clk)
   begin
      if (clk'event and clk = '1') then
         if (m_en = '1') then
            if (b_sel = '1') then
               rdata <= breg(to_integer(uaddr(bra_l-1 downto 0))); -- Bias RAM selected
            else -- Other RAM selected:
               rdata <= outm(to_integer(uaddr(wra_l-1 downto 0))); -- Multiplexes RAM outputs
               -- May be safer if accesses to bottom address grater than NumIn are avoided
            end if;
         end if;
      end if;
   end process;
 
bias_ram:
   process (clk)
      variable d : std_logic_vector(NbitW-1 downto 0); -- Beware of elements whose length is not a multiple of 8
   begin
      if (clk'event and clk = '1') then
         if ( (m_en = '1') and (b_sel = '1') ) then
            for i in ((NbitW+7)/8)-1 downto 0 loop -- we byte to byte
               if (m_we(i) = '1') then
                  d((8*(i+1))-1 downto 8*i) := wdata((8*(i+1))-1 downto 8*i);
               else
                  d((8*(i+1))-1 downto 8*i) := breg(to_integer(uaddr(bra_l-1 downto 0)))((8*(i+1))-1 downto 8*i);
               end if;
            end loop;
            -- The bottom part (extended) of memories address selects the bias
            breg(to_integer(uaddr(bra_l-1 downto 0))) <= d;
         end if;
      end if;
   end process;
 
-- Bias read: -- Here, parallel read of bias is not necessary, so it can be RAM
   --bias <= breg(cont); -- Asynchronous read
   process (clk) -- Synchronous read
   begin
      if clk'event and clk = '1' then
         if reset = '1' then
            --bias <= (others => '0');
         else
            bias <= breg(cntb);
         end if;
      end if;
   end process;
 
   outputs <= Nouts;
 
control: -- With counter and control signal shifts
   process (clk)
   begin
      if (clk'event and clk = '1') then
         if (reset = '1') then
            cont <= 0;
            cntb <= 0;
            st  <= '0';
            en1 <= '0';
            en2 <= '0';
            run_out <= '0';
         else
            input_aux1 <= inputs;
            input_aux2 <= input_aux1;
            --input_aux3 <=input_aux3 input_aux2;
 
            cntb <= cont; -- Bias counter is delayed to assure correctness of pipeline data
            case st is
               when '0' =>
                  en1 <= '0'; -- en1 is delayed 1 cycle in order to insert a register for Wyb
                  case run_in is
                     when '1' => st <= '1';
                     when '0' => st <= '0';
                     when others => st <= '0';
                  end case;
               when '1' =>
                  en1 <= '1'; -- en1 is delayed 1 cycle in order to insert a register for Wyb
                  if cont = NumN-1 then
                     cont <= 0;
                     st <= '0';
                  else 
                     cont <= cont +1;
                  end if;
            end case;
 
            en2 <= en1;
 
            run_out <= en3; -- It lasts for 1 cycle, just after the output enable of the layer (when all outputs have just updated)
         end if;
      end if;
   end process;
 
   en3 <= en_out;
 
end Behavioral;
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2019 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.