OpenCores
URL https://opencores.org/ocsvn/artificial_neural_network/artificial_neural_network/trunk

Subversion Repositories artificial_neural_network

[/] [artificial_neural_network/] [trunk/] [wrapper_Vivado/] [VHDL_files/] [ann_v2_0_Wyb_S_AXI.vhd] - Rev 3

Compare with Previous | Blame | View Log

library ieee;
use ieee.std_logic_1164.all;
use ieee.numeric_std.all;
 
entity ann_v2_0_Wyb_S_AXI is
	generic (
		-- Users to add parameters here
      ADDR_WIDTH : integer;
      DATA_WIDTH : integer := 16;
		-- User parameters ends
		-- Do not modify the parameters beyond this line
 
		-- Width of ID for for write address, write data, read address and read data
		C_S_AXI_ID_WIDTH	: integer	:= 1;
		-- Width of S_AXI data bus
		C_S_AXI_DATA_WIDTH	: integer	:= 32;
		-- Width of S_AXI address bus
		C_S_AXI_ADDR_WIDTH	: integer	:= 10;
		-- Width of optional user defined signal in write address channel
		C_S_AXI_AWUSER_WIDTH	: integer	:= 0;
		-- Width of optional user defined signal in read address channel
		C_S_AXI_ARUSER_WIDTH	: integer	:= 0;
		-- Width of optional user defined signal in write data channel
		C_S_AXI_WUSER_WIDTH	: integer	:= 0;
		-- Width of optional user defined signal in read data channel
		C_S_AXI_RUSER_WIDTH	: integer	:= 0;
		-- Width of optional user defined signal in write response channel
		C_S_AXI_BUSER_WIDTH	: integer	:= 0
	);
	port (
		-- Users to add ports here
      m_en : out std_logic;
      m_we : out std_logic_vector(((DATA_WIDTH+7)/8)-1 downto 0);
      wdata : out std_logic_vector(DATA_WIDTH-1 downto 0);
      addr : out std_logic_vector(ADDR_WIDTH-1 downto 0);
      rdata : in std_logic_vector(DATA_WIDTH-1 downto 0);
		-- User ports ends
		-- Do not modify the ports beyond this line
 
		-- Global Clock Signal
		S_AXI_ACLK	: in std_logic;
		-- Global Reset Signal. This Signal is Active LOW
		S_AXI_ARESETN	: in std_logic;
		-- Write Address ID
		S_AXI_AWID	: in std_logic_vector(C_S_AXI_ID_WIDTH-1 downto 0);
		-- Write address
		S_AXI_AWADDR	: in std_logic_vector(C_S_AXI_ADDR_WIDTH-1 downto 0);
		-- Burst length. The burst length gives the exact number of transfers in a burst
		S_AXI_AWLEN	: in std_logic_vector(7 downto 0);
		-- Burst size. This signal indicates the size of each transfer in the burst
		S_AXI_AWSIZE	: in std_logic_vector(2 downto 0);
		-- Burst type. The burst type and the size information, 
    -- determine how the address for each transfer within the burst is calculated.
		S_AXI_AWBURST	: in std_logic_vector(1 downto 0);
		-- Lock type. Provides additional information about the
    -- atomic characteristics of the transfer.
		S_AXI_AWLOCK	: in std_logic;
		-- Memory type. This signal indicates how transactions
    -- are required to progress through a system.
		S_AXI_AWCACHE	: in std_logic_vector(3 downto 0);
		-- Protection type. This signal indicates the privilege
    -- and security level of the transaction, and whether
    -- the transaction is a data access or an instruction access.
		S_AXI_AWPROT	: in std_logic_vector(2 downto 0);
		-- Quality of Service, QoS identifier sent for each
    -- write transaction.
		S_AXI_AWQOS	: in std_logic_vector(3 downto 0);
		-- Region identifier. Permits a single physical interface
    -- on a slave to be used for multiple logical interfaces.
		S_AXI_AWREGION	: in std_logic_vector(3 downto 0);
		-- Optional User-defined signal in the write address channel.
		S_AXI_AWUSER	: in std_logic_vector(C_S_AXI_AWUSER_WIDTH-1 downto 0);
		-- Write address valid. This signal indicates that
    -- the channel is signaling valid write address and
    -- control information.
		S_AXI_AWVALID	: in std_logic;
		-- Write address ready. This signal indicates that
    -- the slave is ready to accept an address and associated
    -- control signals.
		S_AXI_AWREADY	: out std_logic;
		-- Write Data
		S_AXI_WDATA	: in std_logic_vector(C_S_AXI_DATA_WIDTH-1 downto 0);
		-- Write strobes. This signal indicates which byte
    -- lanes hold valid data. There is one write strobe
    -- bit for each eight bits of the write data bus.
		S_AXI_WSTRB	: in std_logic_vector((C_S_AXI_DATA_WIDTH/8)-1 downto 0);
		-- Write last. This signal indicates the last transfer
    -- in a write burst.
		S_AXI_WLAST	: in std_logic;
		-- Optional User-defined signal in the write data channel.
		S_AXI_WUSER	: in std_logic_vector(C_S_AXI_WUSER_WIDTH-1 downto 0);
		-- Write valid. This signal indicates that valid write
    -- data and strobes are available.
		S_AXI_WVALID	: in std_logic;
		-- Write ready. This signal indicates that the slave
    -- can accept the write data.
		S_AXI_WREADY	: out std_logic;
		-- Response ID tag. This signal is the ID tag of the
    -- write response.
		S_AXI_BID	: out std_logic_vector(C_S_AXI_ID_WIDTH-1 downto 0);
		-- Write response. This signal indicates the status
    -- of the write transaction.
		S_AXI_BRESP	: out std_logic_vector(1 downto 0);
		-- Optional User-defined signal in the write response channel.
		S_AXI_BUSER	: out std_logic_vector(C_S_AXI_BUSER_WIDTH-1 downto 0);
		-- Write response valid. This signal indicates that the
    -- channel is signaling a valid write response.
		S_AXI_BVALID	: out std_logic;
		-- Response ready. This signal indicates that the master
    -- can accept a write response.
		S_AXI_BREADY	: in std_logic;
		-- Read address ID. This signal is the identification
    -- tag for the read address group of signals.
		S_AXI_ARID	: in std_logic_vector(C_S_AXI_ID_WIDTH-1 downto 0);
		-- Read address. This signal indicates the initial
    -- address of a read burst transaction.
		S_AXI_ARADDR	: in std_logic_vector(C_S_AXI_ADDR_WIDTH-1 downto 0);
		-- Burst length. The burst length gives the exact number of transfers in a burst
		S_AXI_ARLEN	: in std_logic_vector(7 downto 0);
		-- Burst size. This signal indicates the size of each transfer in the burst
		S_AXI_ARSIZE	: in std_logic_vector(2 downto 0);
		-- Burst type. The burst type and the size information, 
    -- determine how the address for each transfer within the burst is calculated.
		S_AXI_ARBURST	: in std_logic_vector(1 downto 0);
		-- Lock type. Provides additional information about the
    -- atomic characteristics of the transfer.
		S_AXI_ARLOCK	: in std_logic;
		-- Memory type. This signal indicates how transactions
    -- are required to progress through a system.
		S_AXI_ARCACHE	: in std_logic_vector(3 downto 0);
		-- Protection type. This signal indicates the privilege
    -- and security level of the transaction, and whether
    -- the transaction is a data access or an instruction access.
		S_AXI_ARPROT	: in std_logic_vector(2 downto 0);
		-- Quality of Service, QoS identifier sent for each
    -- read transaction.
		S_AXI_ARQOS	: in std_logic_vector(3 downto 0);
		-- Region identifier. Permits a single physical interface
    -- on a slave to be used for multiple logical interfaces.
		S_AXI_ARREGION	: in std_logic_vector(3 downto 0);
		-- Optional User-defined signal in the read address channel.
		S_AXI_ARUSER	: in std_logic_vector(C_S_AXI_ARUSER_WIDTH-1 downto 0);
		-- Write address valid. This signal indicates that
    -- the channel is signaling valid read address and
    -- control information.
		S_AXI_ARVALID	: in std_logic;
		-- Read address ready. This signal indicates that
    -- the slave is ready to accept an address and associated
    -- control signals.
		S_AXI_ARREADY	: out std_logic;
		-- Read ID tag. This signal is the identification tag
    -- for the read data group of signals generated by the slave.
		S_AXI_RID	: out std_logic_vector(C_S_AXI_ID_WIDTH-1 downto 0);
		-- Read Data
		S_AXI_RDATA	: out std_logic_vector(C_S_AXI_DATA_WIDTH-1 downto 0);
		-- Read response. This signal indicates the status of
    -- the read transfer.
		S_AXI_RRESP	: out std_logic_vector(1 downto 0);
		-- Read last. This signal indicates the last transfer
    -- in a read burst.
		S_AXI_RLAST	: out std_logic;
		-- Optional User-defined signal in the read address channel.
		S_AXI_RUSER	: out std_logic_vector(C_S_AXI_RUSER_WIDTH-1 downto 0);
		-- Read valid. This signal indicates that the channel
    -- is signaling the required read data.
		S_AXI_RVALID	: out std_logic;
		-- Read ready. This signal indicates that the master can
    -- accept the read data and response information.
		S_AXI_RREADY	: in std_logic
	);
end ann_v2_0_Wyb_S_AXI;
 
architecture arch_imp of ann_v2_0_Wyb_S_AXI is
 
	-- AXI4FULL signals
	signal axi_awaddr	: std_logic_vector(C_S_AXI_ADDR_WIDTH-1 downto 0);
	signal axi_awready	: std_logic;
	signal axi_wready	: std_logic;
	signal axi_bresp	: std_logic_vector(1 downto 0);
	signal axi_buser	: std_logic_vector(C_S_AXI_BUSER_WIDTH-1 downto 0);
	signal axi_bvalid	: std_logic;
	signal axi_araddr	: std_logic_vector(C_S_AXI_ADDR_WIDTH-1 downto 0);
	signal axi_arready	: std_logic;
	signal axi_rdata	: std_logic_vector(C_S_AXI_DATA_WIDTH-1 downto 0);
	signal axi_rresp	: std_logic_vector(1 downto 0);
	signal axi_rlast	: std_logic;
	signal axi_ruser	: std_logic_vector(C_S_AXI_RUSER_WIDTH-1 downto 0);
	signal axi_rvalid	: std_logic;
	-- aw_wrap_en determines wrap boundary and enables wrapping
	signal  aw_wrap_en : std_logic; 
	-- ar_wrap_en determines wrap boundary and enables wrapping
	signal  ar_wrap_en : std_logic;
	-- aw_wrap_size is the size of the write transfer, the
	-- write address wraps to a lower address if upper address
	-- limit is reached
	signal aw_wrap_size : integer;
	-- ar_wrap_size is the size of the read transfer, the
	-- read address wraps to a lower address if upper address
	-- limit is reached
	signal ar_wrap_size : integer;
	-- The axi_awv_awr_flag flag marks the presence of write address valid
	signal axi_awv_awr_flag    : std_logic;
	--The axi_arv_arr_flag flag marks the presence of read address valid
	signal axi_arv_arr_flag    : std_logic;
	-- The axi_awlen_cntr internal write address counter to keep track of beats in a burst transaction
	signal axi_awlen_cntr      : std_logic_vector(7 downto 0); -- It would be easyer with an unsigned type
	--The axi_arlen_cntr internal read address counter to keep track of beats in a burst transaction
	signal axi_arlen_cntr      : std_logic_vector(7 downto 0); -- It would be easyer with an unsigned type
	--local parameter for addressing 32 bit / 64 bit C_S_AXI_DATA_WIDTH
	--ADDR_LSB is used for addressing 32/64 bit registers/memories
	--ADDR_LSB = 2 for 32 bits (n downto 2) 
	--ADDR_LSB = 3 for 42 bits (n downto 3)
 
	constant ADDR_LSB  : integer := 2; --(C_S_AXI_DATA_WIDTH/32)+ 1;
	constant low : std_logic_vector (C_S_AXI_ADDR_WIDTH - 1 downto 0) := (others => '0');
 
   signal we : std_logic;
 
begin
	-- I/O Connections assignments
 
	S_AXI_AWREADY	<= axi_awready;
	S_AXI_WREADY	<= axi_wready;
	S_AXI_BRESP	<= axi_bresp;
	S_AXI_BUSER	<= axi_buser;
	S_AXI_BVALID	<= axi_bvalid;
	S_AXI_ARREADY	<= axi_arready;
	S_AXI_RDATA	<= axi_rdata;
	S_AXI_RRESP	<= axi_rresp;
	S_AXI_RLAST	<= axi_rlast;
	S_AXI_RUSER	<= axi_ruser;
	S_AXI_RVALID	<= axi_rvalid;
	S_AXI_BID <= S_AXI_AWID;
	S_AXI_RID <= S_AXI_ARID;
	aw_wrap_size <= ((C_S_AXI_DATA_WIDTH)/8 * to_integer(unsigned(S_AXI_AWLEN))); 
	ar_wrap_size <= ((C_S_AXI_DATA_WIDTH)/8 * to_integer(unsigned(S_AXI_ARLEN))); 
	aw_wrap_en <= '1' when (((axi_awaddr AND std_logic_vector(to_unsigned(aw_wrap_size,C_S_AXI_ADDR_WIDTH))) XOR std_logic_vector(to_unsigned(aw_wrap_size,C_S_AXI_ADDR_WIDTH))) = low) else '0';
	ar_wrap_en <= '1' when (((axi_araddr AND std_logic_vector(to_unsigned(ar_wrap_size,C_S_AXI_ADDR_WIDTH))) XOR std_logic_vector(to_unsigned(ar_wrap_size,C_S_AXI_ADDR_WIDTH))) = low) else '0';
	S_AXI_BUSER <= (others => '0');
 
	-- Implement axi_awready generation
 
	-- axi_awready is asserted for one S_AXI_ACLK clock cycle when both
	-- S_AXI_AWVALID and S_AXI_WVALID are asserted. axi_awready is
	-- de-asserted when reset is low.
 
	process (S_AXI_ACLK)
	begin
	  if rising_edge(S_AXI_ACLK) then 
	    if S_AXI_ARESETN = '0' then
	      axi_awready <= '0';
	      axi_awv_awr_flag <= '0';
	    else
	      if (axi_awready = '0' and S_AXI_AWVALID = '1' and axi_awv_awr_flag = '0' and axi_arv_arr_flag = '0') then
	        -- slave is ready to accept an address and
	        -- associated control signals
	        axi_awv_awr_flag  <= '1'; -- used for generation of bresp() and bvalid
	        axi_awready <= '1';
	      elsif (S_AXI_WLAST = '1' and axi_wready = '1') then 
	      -- preparing to accept next address after current write burst tx completion
	        axi_awv_awr_flag  <= '0';
	      else
	        axi_awready <= '0';
	      end if;
	    end if;
	  end if;         
	end process; 
	-- Implement axi_awaddr latching
 
	-- This process is used to latch the address when both 
	-- S_AXI_AWVALID and S_AXI_WVALID are valid. 
 
	process (S_AXI_ACLK)
	begin
	  if rising_edge(S_AXI_ACLK) then 
	    if S_AXI_ARESETN = '0' then
	      axi_awaddr <= (others => '0');
	      axi_awlen_cntr <= (others => '0');
	    else
	      if (axi_awready = '0' and S_AXI_AWVALID = '1' and axi_awv_awr_flag = '0') then
	      -- address latching 
	        axi_awaddr <= S_AXI_AWADDR;  ---- start address of transfer
	        axi_awlen_cntr <= (others => '0');
	      elsif((axi_awlen_cntr <= S_AXI_AWLEN) and axi_wready = '1' and S_AXI_WVALID = '1') then     
	        axi_awlen_cntr <= std_logic_vector (unsigned(axi_awlen_cntr) + 1);
 
	        case (S_AXI_AWBURST) is
	          when "00" => -- fixed burst
	            -- The write address for all the beats in the transaction are fixed
	            axi_awaddr     <= axi_awaddr;       ----for awsize = 4 bytes (010)
	          when "01" => --incremental burst
	            -- The write address for all the beats in the transaction are increments by awsize
	            axi_awaddr(C_S_AXI_ADDR_WIDTH - 1 downto ADDR_LSB) <= std_logic_vector (unsigned(axi_awaddr(C_S_AXI_ADDR_WIDTH - 1 downto ADDR_LSB)) + 1);--awaddr aligned to 4 byte boundary
	            axi_awaddr(ADDR_LSB-1 downto 0)  <= (others => '0');  ----for awsize = 4 bytes (010)
	          when "10" => --Wrapping burst
	            -- The write address wraps when the address reaches wrap boundary 
	            if (aw_wrap_en = '1') then
	              axi_awaddr <= std_logic_vector (unsigned(axi_awaddr) - (to_unsigned(aw_wrap_size,C_S_AXI_ADDR_WIDTH)));                
	            else 
	              axi_awaddr(C_S_AXI_ADDR_WIDTH - 1 downto ADDR_LSB) <= std_logic_vector (unsigned(axi_awaddr(C_S_AXI_ADDR_WIDTH - 1 downto ADDR_LSB)) + 1);--awaddr aligned to 4 byte boundary
	              axi_awaddr(ADDR_LSB-1 downto 0)  <= (others => '0');  ----for awsize = 4 bytes (010)
	            end if;
	          when others => --reserved (incremental burst for example)
	            axi_awaddr(C_S_AXI_ADDR_WIDTH - 1 downto ADDR_LSB) <= std_logic_vector (unsigned(axi_awaddr(C_S_AXI_ADDR_WIDTH - 1 downto ADDR_LSB)) + 1);--for awsize = 4 bytes (010)
	            axi_awaddr(ADDR_LSB-1 downto 0)  <= (others => '0');
	        end case;        
	      end if;
	    end if;
	  end if;
	end process;
	-- Implement axi_wready generation
 
	-- axi_wready is asserted for one S_AXI_ACLK clock cycle when both
	-- S_AXI_AWVALID and S_AXI_WVALID are asserted. axi_wready is 
	-- de-asserted when reset is low. 
 
	process (S_AXI_ACLK)
	begin
	  if rising_edge(S_AXI_ACLK) then 
	    if S_AXI_ARESETN = '0' then
	      axi_wready <= '0';
	    else
	      if (axi_wready = '0' and S_AXI_WVALID = '1' and axi_awv_awr_flag = '1') then
	        axi_wready <= '1';
	      elsif (S_AXI_WLAST = '1' and axi_wready = '1') then 
 
	        axi_wready <= '0';
	      end if;
	    end if;
	  end if;         
	end process; 
	-- Implement write response logic generation
 
	-- The write response and response valid signals are asserted by the slave 
	-- when axi_wready, S_AXI_WVALID, axi_wready and S_AXI_WVALID are asserted.  
	-- This marks the acceptance of address and indicates the status of 
	-- write transaction.
 
	process (S_AXI_ACLK)
	begin
	  if rising_edge(S_AXI_ACLK) then 
	    if S_AXI_ARESETN = '0' then
	      axi_bvalid  <= '0';
	      axi_bresp  <= "00"; --need to work more on the responses
	    else
	      if (axi_awv_awr_flag = '1' and axi_wready = '1' and S_AXI_WVALID = '1' and axi_bvalid = '0' and S_AXI_WLAST = '1' ) then
	        axi_bvalid <= '1';
	        axi_bresp  <= "00"; 
	      elsif (S_AXI_BREADY = '1' and axi_bvalid = '1') then  
	      --check if bready is asserted while bvalid is high)
	        axi_bvalid <= '0';                      
	      end if;
	    end if;
	  end if;         
	end process; 
	-- Implement axi_arready generation
 
	-- axi_arready is asserted for one S_AXI_ACLK clock cycle when
	-- S_AXI_ARVALID is asserted. axi_awready is 
	-- de-asserted when reset (active low) is asserted. 
	-- The read address is also latched when S_AXI_ARVALID is 
	-- asserted. axi_araddr is reset to zero on reset assertion.
 
	process (S_AXI_ACLK)
	begin
	  if rising_edge(S_AXI_ACLK) then 
	    if S_AXI_ARESETN = '0' then
	      axi_arready <= '0';
	      axi_arv_arr_flag <= '0';
	    else
	      if (axi_arready = '0' and S_AXI_ARVALID = '1' and axi_awv_awr_flag = '0' and axi_arv_arr_flag = '0') then
	        axi_arready <= '1';
	        axi_arv_arr_flag <= '1';
	      elsif (axi_rvalid = '1' and S_AXI_RREADY = '1' and (axi_arlen_cntr = S_AXI_ARLEN)) then 
	      -- preparing to accept next address after current read completion
	        axi_arv_arr_flag <= '0';
	      else
	        axi_arready <= '0';
	      end if;
	    end if;
	  end if;         
	end process; 
	-- Implement axi_araddr latching
 
	--This process is used to latch the address when both 
	--S_AXI_ARVALID and S_AXI_RVALID are valid. 
	process (S_AXI_ACLK)
	begin
	  if rising_edge(S_AXI_ACLK) then 
	    if S_AXI_ARESETN = '0' then
	      axi_araddr <= (others => '0');
	      axi_arlen_cntr <= (others => '0');
	      axi_rlast <= '0';
	    else
	      if (axi_arready = '0' and S_AXI_ARVALID = '1' and axi_arv_arr_flag = '0') then
	        -- address latching 
	        axi_araddr <= S_AXI_ARADDR; ---- start address of transfer
	        axi_arlen_cntr <= (others => '0');
	        axi_rlast <= '0';
	      elsif((axi_arlen_cntr <= S_AXI_ARLEN) and axi_rvalid = '1' and S_AXI_RREADY = '1') then     
	        axi_arlen_cntr <= std_logic_vector (unsigned(axi_arlen_cntr) + 1);
	        axi_rlast <= '0';      
 
	        case (S_AXI_ARBURST) is
	          when "00" =>  -- fixed burst
	            -- The read address for all the beats in the transaction are fixed
	            axi_araddr     <= axi_araddr;      ----for arsize = 4 bytes (010)
	          when "01" =>  --incremental burst
	            -- The read address for all the beats in the transaction are increments by awsize
	            axi_araddr(C_S_AXI_ADDR_WIDTH - 1 downto ADDR_LSB) <= std_logic_vector (unsigned(axi_araddr(C_S_AXI_ADDR_WIDTH - 1 downto ADDR_LSB)) + 1); --araddr aligned to 4 byte boundary
	            axi_araddr(ADDR_LSB-1 downto 0)  <= (others => '0');  ----for awsize = 4 bytes (010)
	          when "10" =>  --Wrapping burst
	            -- The read address wraps when the address reaches wrap boundary 
	            if (ar_wrap_en = '1') then   
	              axi_araddr <= std_logic_vector (unsigned(axi_araddr) - (to_unsigned(ar_wrap_size,C_S_AXI_ADDR_WIDTH)));
	            else 
	              axi_araddr(C_S_AXI_ADDR_WIDTH - 1 downto ADDR_LSB) <= std_logic_vector (unsigned(axi_araddr(C_S_AXI_ADDR_WIDTH - 1 downto ADDR_LSB)) + 1); --araddr aligned to 4 byte boundary
	              axi_araddr(ADDR_LSB-1 downto 0)  <= (others => '0');  ----for awsize = 4 bytes (010)
	            end if;
	          when others => --reserved (incremental burst for example)
	            axi_araddr(C_S_AXI_ADDR_WIDTH - 1 downto ADDR_LSB) <= std_logic_vector (unsigned(axi_araddr(C_S_AXI_ADDR_WIDTH - 1 downto ADDR_LSB)) + 1);--for arsize = 4 bytes (010)
			      axi_araddr(ADDR_LSB-1 downto 0)  <= (others => '0');
	        end case;         
	      elsif((axi_arlen_cntr = S_AXI_ARLEN) and axi_rlast = '0' and axi_arv_arr_flag = '1') then  
	        axi_rlast <= '1';
	      elsif (S_AXI_RREADY = '1') then  
	        axi_rlast <= '0';
	      end if;
	    end if;
	  end if;
	end  process;  
	-- Implement axi_arvalid generation
 
	-- axi_rvalid is asserted for one S_AXI_ACLK clock cycle when both 
	-- S_AXI_ARVALID and axi_arready are asserted. The slave registers 
	-- data are available on the axi_rdata bus at this instance. The 
	-- assertion of axi_rvalid marks the validity of read data on the 
	-- bus and axi_rresp indicates the status of read transaction.axi_rvalid 
	-- is deasserted on reset (active low). axi_rresp and axi_rdata are 
	-- cleared to zero on reset (active low).  
 
	process (S_AXI_ACLK)
	begin
	  if rising_edge(S_AXI_ACLK) then
	    if S_AXI_ARESETN = '0' then
	      axi_rvalid <= '0';
	      axi_rresp  <= "00";
	    else
	      if (axi_arv_arr_flag = '1' and axi_rvalid = '0') then
	        axi_rvalid <= '1';
	        axi_rresp  <= "00"; -- 'OKAY' response
	      elsif (axi_rvalid = '1' and S_AXI_RREADY = '1') then
	        axi_rvalid <= '0';
	      end  if;      
	    end if;
	  end if;
	end  process;
 
   m_en <= axi_awv_awr_flag or axi_arv_arr_flag;
   we <= axi_awv_awr_flag
         when S_AXI_WSTRB /= (S_AXI_WSTRB'range => '0') 
         else '0';
assign_we: for i in 0 to m_we'length-1 generate
      m_we(i) <= we and S_AXI_WSTRB(i);
   end generate;
   addr  <= axi_awaddr(ADDR_WIDTH+ADDR_LSB-1 downto ADDR_LSB) when axi_awv_awr_flag = '1' else
         axi_araddr(ADDR_WIDTH+ADDR_LSB-1 downto ADDR_LSB) when axi_arv_arr_flag = '1' else
         (others => '-');
   wdata  <= S_AXI_WDATA(DATA_WIDTH-1 downto 0);
   axi_rdata <= std_logic_vector(resize(signed(rdata),C_S_AXI_DATA_WIDTH)); -- Sign extension
 
end arch_imp;
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2019 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.