OpenCores
URL https://opencores.org/ocsvn/ethernet_tri_mode/ethernet_tri_mode/trunk

Subversion Repositories ethernet_tri_mode

[/] [ethernet_tri_mode/] [trunk/] [syn/] [syn_xilinx.prj] - Rev 35

Go to most recent revision | Compare with Previous | Blame | View Log

#-- Synplicity, Inc.
#-- Version Synplify Pro 8.1
#-- Project file D:\root\home\jon\ethernet_tri_mode\syn\syn_xilinx.prj
#-- Written on Mon Aug 04 17:11:28 2008


#add_file options
add_file -verilog "../rtl/verilog/header.v"
add_file -verilog "../rtl/verilog/MAC_tx/MAC_tx_FF.v"
add_file -verilog "../rtl/verilog/MAC_tx/Ramdon_gen.v"
add_file -verilog "../rtl/verilog/MAC_tx/CRC_gen.v"
add_file -verilog "../rtl/verilog/MAC_tx/MAC_tx_addr_add.v"
add_file -verilog "../rtl/verilog/MAC_tx/MAC_tx_Ctrl.v"
add_file -verilog "../rtl/verilog/MAC_tx/flow_ctrl.v"
add_file -verilog "../rtl/verilog/MAC_rx/CRC_chk.v"
add_file -verilog "../rtl/verilog/MAC_rx/MAC_rx_add_chk.v"
add_file -verilog "../rtl/verilog/MAC_rx/MAC_rx_FF.v"
add_file -verilog "../rtl/verilog/MAC_rx/MAC_rx_ctrl.v"
add_file -verilog "../rtl/verilog/RMON/RMON_addr_gen.v"
add_file -verilog "../rtl/verilog/RMON/RMON_ctrl.v"
add_file -verilog "../rtl/verilog/RMON/RMON_dpram.v"
add_file -verilog "../rtl/verilog/MAC_rx/Broadcast_filter.v"
add_file -verilog "../rtl/verilog/RMON.v"
add_file -verilog "../rtl/verilog/MAC_rx.v"
add_file -verilog "../rtl/verilog/MAC_tx.v"
add_file -verilog "../rtl/verilog/miim/eth_clockgen.v"
add_file -verilog "../rtl/verilog/miim/eth_outputcontrol.v"
add_file -verilog "../rtl/verilog/miim/eth_shiftreg.v"
add_file -verilog "../rtl/verilog/miim/timescale.v"
add_file -verilog "../rtl/verilog/TECH/xilinx/duram.v"
add_file -verilog "../rtl/verilog/TECH/xilinx/CLK_SWITCH.v"
add_file -verilog "../rtl/verilog/TECH/xilinx/CLK_DIV2.v"
add_file -verilog "../rtl/verilog/eth_miim.v"
add_file -verilog "../rtl/verilog/Clk_ctrl.v"
add_file -verilog "../rtl/verilog/Phy_int.v"
add_file -verilog "../rtl/verilog/afifo.v"
add_file -verilog "../rtl/verilog/Reg_int.v"
add_file -verilog "../rtl/verilog/MAC_top.v"


#implementation: "syn"
impl -add syn

#device options
set_option -technology VIRTEX4
set_option -part XC4VLX40
set_option -package FF668
set_option -speed_grade -10

#compilation/mapping options
set_option -default_enum_encoding onehot
set_option -symbolic_fsm_compiler 0
set_option -resource_sharing 1
set_option -use_fsm_explorer 0
set_option -top_module "MAC_top"

#map options
set_option -frequency auto
set_option -run_prop_extract 0
set_option -fanout_limit 10000
set_option -disable_io_insertion 1
set_option -pipe 1
set_option -update_models_cp 0
set_option -verification_mode 0
set_option -fixgatedclocks 0
set_option -modular 0
set_option -retiming 0
set_option -no_sequential_opt 0

#simulation options
set_option -write_verilog 0
set_option -write_vhdl 0

#VIF options
set_option -write_vif 0

#automatic place and route (vendor) options
set_option -write_apr_constraint 0

#set result format/file last
project -result_file "./MAC_top.edf"

#
#implementation attributes

set_option -vlog_std v2001
set_option -dup 0
set_option -project_relative_includes 1

#par_1 attributes
set_option -job par_1 -add par
set_option -job par_1 -option run_backannotation 0
impl -active "syn"

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.