URL
https://opencores.org/ocsvn/ethmac/ethmac/trunk
Subversion Repositories ethmac
[/] [ethmac/] [trunk/] [rtl/] [verilog/] [eth_random.v] - Rev 352
Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// eth_random.v //// //// //// //// This file is part of the Ethernet IP core project //// //// http://www.opencores.org/project,ethmac //// //// //// //// Author(s): //// //// - Igor Mohor (igorM@opencores.org) //// //// - Novan Hartadi (novan@vlsi.itb.ac.id) //// //// - Mahmud Galela (mgalela@vlsi.itb.ac.id) //// //// //// //// All additional information is avaliable in the Readme.txt //// //// file. //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2001 Authors //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.3 2002/01/23 10:28:16 mohor // Link in the header changed. // // Revision 1.2 2001/10/19 08:43:51 mohor // eth_timescale.v changed to timescale.v This is done because of the // simulation of the few cores in a one joined project. // // Revision 1.1 2001/08/06 14:44:29 mohor // A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex). // Include files fixed to contain no path. // File names and module names changed ta have a eth_ prologue in the name. // File eth_timescale.v is used to define timescale // All pin names on the top module are changed to contain _I, _O or _OE at the end. // Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O // and Mdo_OE. The bidirectional signal must be created on the top level. This // is done due to the ASIC tools. // // Revision 1.1 2001/07/30 21:23:42 mohor // Directory structure changed. Files checked and joind together. // // Revision 1.3 2001/06/19 18:16:40 mohor // TxClk changed to MTxClk (as discribed in the documentation). // Crc changed so only one file can be used instead of two. // // Revision 1.2 2001/06/19 10:38:07 mohor // Minor changes in header. // // Revision 1.1 2001/06/19 10:27:57 mohor // TxEthMAC initial release. // // // // `include "timescale.v" module eth_random (MTxClk, Reset, StateJam, StateJam_q, RetryCnt, NibCnt, ByteCnt, RandomEq0, RandomEqByteCnt); input MTxClk; input Reset; input StateJam; input StateJam_q; input [3:0] RetryCnt; input [15:0] NibCnt; input [9:0] ByteCnt; output RandomEq0; output RandomEqByteCnt; wire Feedback; reg [9:0] x; wire [9:0] Random; reg [9:0] RandomLatched; always @ (posedge MTxClk or posedge Reset) begin if(Reset) x[9:0] <= 0; else x[9:0] <= {x[8:0], Feedback}; end assign Feedback = ~(x[2] ^ x[9]); assign Random [0] = x[0]; assign Random [1] = (RetryCnt > 1) ? x[1] : 1'b0; assign Random [2] = (RetryCnt > 2) ? x[2] : 1'b0; assign Random [3] = (RetryCnt > 3) ? x[3] : 1'b0; assign Random [4] = (RetryCnt > 4) ? x[4] : 1'b0; assign Random [5] = (RetryCnt > 5) ? x[5] : 1'b0; assign Random [6] = (RetryCnt > 6) ? x[6] : 1'b0; assign Random [7] = (RetryCnt > 7) ? x[7] : 1'b0; assign Random [8] = (RetryCnt > 8) ? x[8] : 1'b0; assign Random [9] = (RetryCnt > 9) ? x[9] : 1'b0; always @ (posedge MTxClk or posedge Reset) begin if(Reset) RandomLatched <= 10'h000; else begin if(StateJam & StateJam_q) RandomLatched <= Random; end end // Random Number == 0 IEEE 802.3 page 68. If 0 we go to defer and not to backoff. assign RandomEq0 = RandomLatched == 10'h0; assign RandomEqByteCnt = ByteCnt[9:0] == RandomLatched & (&NibCnt[6:0]); endmodule