OpenCores
URL https://opencores.org/ocsvn/ft816float/ft816float/trunk

Subversion Repositories ft816float

[/] [ft816float/] [trunk/] [rtl/] [verilog2/] [i2f.sv] - Rev 55

Go to most recent revision | Compare with Previous | Blame | View Log

// ============================================================================
//        __
//   \\__/ o\    (C) 2006-2020  Robert Finch, Waterloo
//    \  __ /    All rights reserved.
//     \/_//     robfinch<remove>@finitron.ca
//       ||
//
//      i2f.sv
//  - convert integer to floating point
//  - parameterized width
//  - IEEE 754 representation
//  - pipelineable
//  - single cycle latency
//
// This source file is free software: you can redistribute it and/or modify 
// it under the terms of the GNU Lesser General Public License as published 
// by the Free Software Foundation, either version 3 of the License, or     
// (at your option) any later version.                                      
//                                                                          
// This source file is distributed in the hope that it will be useful,      
// but WITHOUT ANY WARRANTY; without even the implied warranty of           
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the            
// GNU General Public License for more details.                             
//                                                                          
// You should have received a copy of the GNU General Public License        
// along with this program.  If not, see <http://www.gnu.org/licenses/>.    
//                                                                          
// ============================================================================

import fp::*;

module i2f (clk, ce, op, rm, i, o);
input clk;
input ce;
input op;                                               // 1 = signed, 0 = unsigned
input [2:0] rm;                 // rounding mode
input [FPWID-1:0] i;            // integer input
output [FPWID-1:0] o;           // float output

wire [EMSB:0] zeroXp = {EMSB{1'b1}};

wire iz;                        // zero input ?
wire [MSB:0] imag;      // get magnitude of i
wire [MSB:0] imag1 = (op & i[MSB]) ? -i : i;
wire [7:0] lz;          // count the leading zeros in the number
wire [EMSB:0] wd;       // compute number of whole digits
wire so;                        // copy the sign of the input (easy)
wire [2:0] rmd;

delay1 #(3)   u0 (.clk(clk), .ce(ce), .i(rm),     .o(rmd) );
delay1 #(1)   u1 (.clk(clk), .ce(ce), .i(i==0),   .o(iz) );
delay1 #(FPWID) u2 (.clk(clk), .ce(ce), .i(imag1),  .o(imag) );
delay1 #(1)   u3 (.clk(clk), .ce(ce), .i(i[MSB]), .o(so) );
generate 
if (FPWID==128) begin
cntlz128Reg    u4 (.clk(clk), .ce(ce), .i(imag1), .o(lz) );
end else if (FPWID==96) begin
cntlz96Reg    u4 (.clk(clk), .ce(ce), .i(imag1), .o(lz[6:0]) );
assign lz[7]=1'b0;
end else if (FPWID==84) begin
cntlz96Reg    u4 (.clk(clk), .ce(ce), .i({imag1,12'hfff}), .o(lz[6:0]) );
assign lz[7]=1'b0;
end else if (FPWID==80) begin
cntlz80Reg    u4 (.clk(clk), .ce(ce), .i(imag1), .o(lz[6:0]) );
assign lz[7]=1'b0;
end else if (FPWID==64) begin
cntlz64Reg    u4 (.clk(clk), .ce(ce), .i(imag1), .o(lz[6:0]) );
assign lz[7]=1'b0;
end else if (FPWID==32) begin
cntlz32Reg    u4 (.clk(clk), .ce(ce), .i(imag1), .o(lz[5:0]) );
assign lz[7:6]=2'b00;
end else begin
        always @* begin
        $display("Uncoded leading zero count in i2f");
        $finish;
  end
end
endgenerate

assign wd = zeroXp - 1 + FPWID - lz;    // constant except for lz

wire [EMSB:0] xo = iz ? 0 : wd;
wire [MSB:0] simag = imag << lz;                // left align number

wire g =  simag[EMSB+2];        // guard bit (lsb)
wire r =  simag[EMSB+1];        // rounding bit
wire s = |simag[EMSB:0];        // "sticky" bit
reg rnd;

// Compute the round bit
always @(rmd,g,r,s,so)
        case (rmd)
        3'd0:   rnd = (g & r) | (r & s);        // round to nearest even
        3'd1:   rnd = 0;                                        // round to zero (truncate)
        3'd2:   rnd = (r | s) & !so;            // round towards +infinity
        3'd3:   rnd = (r | s) & so;                     // round towards -infinity
        3'd4:   rnd = (r | s);
        default:        rnd = (g & r) | (r & s);        // round to nearest even
        endcase

// "hide" the leading one bit = MSB-1
// round the result
wire [FMSB:0] mo = simag[MSB-1:EMSB+1]+rnd;

assign o = {op & so,xo,mo};

endmodule

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.