URL
https://opencores.org/ocsvn/minsoc/minsoc/trunk
Subversion Repositories minsoc
[/] [minsoc/] [branches/] [verilator/] [utils/] [cable_parallel.c] - Rev 36
Go to most recent revision | Compare with Previous | Blame | View Log
/* cable_parallel.c - Parallel cable drivers (XPC3 and XESS) for the Advanced JTAG Bridge Copyright (C) 2001 Marko Mlinar, markom@opencores.org Copyright (C) 2004 György Jeney, nog@sdf.lonestar.org This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <stdio.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <linux/ppdev.h> #include <linux/ioctl.h> #include <linux/parport.h> #include "cable_common.h" #include "errcodes.h" // Common functions used by both cable types static int cable_parallel_out(uint8_t value); static int cable_parallel_inout(uint8_t value, uint8_t *inval); int fd; ///////////////////////////////////////////////////////////////////////////////// /*-------------------------------------[ Parallel port specific functions ]---*/ /////////////////////////////////////////////////////////////////////////////// int cable_parallel_init() { /* //#ifndef WIN32 if (ioperm(base, 3, 1)) { fprintf(stderr, "Couldn't get the port at %x\n", base); perror("Root privileges are required.\n"); return APP_ERR_INIT_FAILED; } printf("Connected to parallel port at %x\n", base); printf("Dropping root privileges.\n"); setreuid(getuid(), getuid()); //#endif */ int mode = IEEE1284_MODE_COMPAT; fd = open("/dev/parport0", O_RDWR | O_NONBLOCK); if (fd == -1) { perror("Not able to acquire the device desriptor\n"); return APP_ERR_INIT_FAILED; } if (ioctl(fd, PPCLAIM) == -1) { perror("Fail to claim the interface for itself.\n"); return APP_ERR_INIT_FAILED; } if (ioctl(fd, PPSETMODE, &mode) == -1) { perror("Setting compatibility mode failed.\n"); return APP_ERR_INIT_FAILED; } return APP_ERR_NONE; } int cable_parallel_opt(int c, char *str) { switch(c) { case 'p': // if(!sscanf(str, "%x", &base)) { // fprintf(stderr, "p parameter must have a hex number as parameter\n"); return APP_ERR_BAD_PARAM; // } break; default: fprintf(stderr, "Unknown parameter '%c'\n", c); return APP_ERR_BAD_PARAM; } return APP_ERR_NONE; } /*-----------------------------------------[ Physical board wait function ]---*/ void cable_parallel_phys_wait() { /* Multiple users have reported poor performance of parallel cables, * which has been traced to usleep() sleeping much longer than * microseconds. The same users have reported error-free functionality * and an order of magnitude improvement in upload speed. * If you get strange data errors while running, add this sleep back * in, or perhaps a busy-wait delay. */ /* usleep(10); */ } /*----------------------------------------------[ xpc3 specific functions ]---*/ int cable_xpc3_out(uint8_t value) { uint8_t out = 0; /* First convert the bits in value byte to the ones that the cable wants */ if(value & TCLK_BIT) out |= 0x02; /* D1 pin 3 */ if(value & TRST_BIT) out |= 0x10; /* Not used */ if(value & TDI_BIT) out |= 0x01; /* D0 pin 2 */ if(value & TMS_BIT) out |= 0x04; /* D2 pin 4 */ return cable_parallel_out(out); } int cable_xpc3_inout(uint8_t value, uint8_t *inval) { uint8_t in; int retval; uint8_t out = 0; /* First convert the bits in value byte to the ones that the cable wants */ if(value & TCLK_BIT) out |= 0x02; /* D1 pin 3 */ if(value & TRST_BIT) out |= 0x10; /* Not used */ if(value & TDI_BIT) out |= 0x01; /* D0 pin 2 */ if(value & TMS_BIT) out |= 0x04; /* D2 pin 4 */ retval = cable_parallel_inout(out, &in); if(in & 0x10) /* S6 pin 13 */ *inval = 1; else *inval = 0; return retval; } /*----------------------------------------------[ xess specific functions ]---*/ int cable_xess_out(uint8_t value) { uint8_t out = 0; /* First convert the bits in value byte to the ones that the cable wants */ if(value & TCLK_BIT) out |= 0x04; /* D2 pin 4 */ if(value & TRST_BIT) out |= 0x08; /* D3 pin 5 */ if(value & TDI_BIT) out |= 0x10; /* D4 pin 6 */ if(value & TMS_BIT) out |= 0x20; /* D3 pin 5 */ return cable_parallel_out(out); } uint8_t cable_xess_inout(uint8_t value, uint8_t *inval) { uint8_t in; int retval; uint8_t out = 0; /* First convert the bits in value byte to the ones that the cable wants */ if(value & TCLK_BIT) out |= 0x04; /* D2 pin 4 */ if(value & TRST_BIT) out |= 0x08; /* D3 pin 5 */ if(value & TDI_BIT) out |= 0x10; /* D4 pin 6 */ if(value & TMS_BIT) out |= 0x20; /* D3 pin 5 */ retval = cable_parallel_inout(out, &in); if(in & 0x20) /* S5 pin 12*/ *inval = 1; else *inval = 0; return retval; } /*----------------------------------------------[ common helper functions ]---*/ // 'static' for internal access only static int cable_parallel_out(uint8_t value) { ioctl(fd, PPWDATA, &value); return APP_ERR_NONE; } static int cable_parallel_inout(uint8_t value, uint8_t *inval) { ioctl(fd, PPRSTATUS, inval); ioctl(fd, PPWDATA, &value); return APP_ERR_NONE; }
Go to most recent revision | Compare with Previous | Blame | View Log