OpenCores
URL https://opencores.org/ocsvn/mod_sim_exp/mod_sim_exp/trunk

Subversion Repositories mod_sim_exp

[/] [mod_sim_exp/] [trunk/] [rtl/] [vhdl/] [core/] [fifo_primitive.vhd] - Rev 94

Compare with Previous | Blame | View Log

----------------------------------------------------------------------  
----  fifo_primitive                                              ---- 
----                                                              ---- 
----  This file is part of the                                    ----
----    Modular Simultaneous Exponentiation Core project          ---- 
----    http://www.opencores.org/cores/mod_sim_exp/               ---- 
----                                                              ---- 
----  Description                                                 ---- 
----    512 x 32 bit fifo                                         ----
----                                                              ---- 
----  Dependencies:                                               ----
----    - FIFO18E1 (xilinx primitive)                             ----
----                                                              ----
----  Authors:                                                    ----
----      - Geoffrey Ottoy, DraMCo research group                 ----
----      - Jonas De Craene, JonasDC@opencores.org                ---- 
----                                                              ---- 
---------------------------------------------------------------------- 
----                                                              ---- 
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG   ---- 
----                                                              ---- 
---- This source file may be used and distributed without         ---- 
---- restriction provided that this copyright statement is not    ---- 
---- removed from the file and that any derivative work contains  ---- 
---- the original copyright notice and the associated disclaimer. ---- 
----                                                              ---- 
---- This source file is free software; you can redistribute it   ---- 
---- and/or modify it under the terms of the GNU Lesser General   ---- 
---- Public License as published by the Free Software Foundation; ---- 
---- either version 2.1 of the License, or (at your option) any   ---- 
---- later version.                                               ---- 
----                                                              ---- 
---- This source is distributed in the hope that it will be       ---- 
---- useful, but WITHOUT ANY WARRANTY; without even the implied   ---- 
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ---- 
---- PURPOSE.  See the GNU Lesser General Public License for more ---- 
---- details.                                                     ---- 
----                                                              ---- 
---- You should have received a copy of the GNU Lesser General    ---- 
---- Public License along with this source; if not, download it   ---- 
---- from http://www.opencores.org/lgpl.shtml                     ---- 
----                                                              ---- 
----------------------------------------------------------------------
 
library ieee;
use ieee.std_logic_1164.all;
use ieee.std_logic_arith.all;
use ieee.std_logic_unsigned.all;
 
-- Xilinx primitives used in this code.
library UNISIM;
use UNISIM.VComponents.all;
 
 
entity fifo_primitive is
  port (
    push_clk : in  std_logic;
    pop_clk  : in  std_logic;
    din      : in  std_logic_vector (31 downto 0);
    dout     : out  std_logic_vector (31 downto 0);
    empty    : out  std_logic;
    full     : out  std_logic;
    push     : in  std_logic;
    pop      : in  std_logic;
    reset    : in std_logic;
    nopop    : out std_logic;
    nopush   : out std_logic
  );
end fifo_primitive;
 
 
architecture Behavioral of fifo_primitive is
	signal rdcount : std_logic_vector(11 downto 0); -- debugging
	signal wrcount : std_logic_vector(11 downto 0); -- debugging
 
	signal reset_i, pop_i, push_i, empty_i, full_i, wrerr_i, rderr_i : std_logic;
begin
 
	empty <= empty_i;
	full <= full_i;
 
	-- these logical equations need to be extended where necessary
	nopop <= rderr_i or (pop and reset_i);
	nopush <= wrerr_i or (push and reset_i);
 
	pop_i <= pop and (not reset_i);
	push_i <= push and (not reset_i);
 
	-- makes the reset at least three clk_cycles long
	RESET_PROC: process (reset, push_clk)
		variable clk_counter : integer range 0 to 3 := 3;
	begin
		if reset = '1' then
			reset_i <= '1';
			clk_counter := 3;
		elsif rising_edge(push_clk) then
			if clk_counter = 0 then
				clk_counter := 0;
				reset_i <= '0';
			else
				clk_counter := clk_counter - 1;
				reset_i <= '1';
			end if;
		end if;
	end process;
 
   FIFO18E1_inst : FIFO18E1
   generic map (
      ALMOST_EMPTY_OFFSET => X"00080",  -- Sets the almost empty threshold
      ALMOST_FULL_OFFSET => X"00080",   -- Sets almost full threshold
      DATA_WIDTH => 36,                 -- Sets data width to 4, 9, 18, or 36
      DO_REG => 1,                      -- Enable output register (0 or 1) Must be 1 if EN_SYN = "FALSE" 
      EN_SYN => FALSE,                   -- Specifies FIFO as dual-clock ("FALSE") or Synchronous ("TRUE")
      FIFO_MODE => "FIFO18_36",         -- Sets mode to FIFO18 or FIFO18_36
      FIRST_WORD_FALL_THROUGH => FALSE, -- Sets the FIFO FWFT to "TRUE" or "FALSE" 
      INIT => X"000000000",             -- Initial values on output port
      SRVAL => X"000000000"             -- Set/Reset value for output port
   )
   port map (
     -- ALMOSTEMPTY => ALMOSTEMPTY, -- 1-bit almost empty output flag
     -- ALMOSTFULL => ALMOSTFULL,   -- 1-bit almost full output flag
      DO => dout,                   -- 32-bit data output
     -- DOP => DOP,                 -- 4-bit parity data output
      EMPTY => empty_i,             -- 1-bit empty output flag
      FULL => full_i,               -- 1-bit full output flag
      -- WRCOUNT, RDCOUNT: 12-bit (each) FIFO pointers
      RDCOUNT => RDCOUNT,           -- 12-bit read count output
      WRCOUNT => WRCOUNT,           -- 12-bit write count output
      -- WRERR, RDERR: 1-bit (each) FIFO full or empty error
      RDERR => rderr_i,             -- 1-bit read error output
      WRERR => wrerr_i,             -- 1-bit write error
      DI => din,                    -- 32-bit data input
      DIP => "0000",                -- 4-bit parity input
      RDEN => pop_i,                -- 1-bit read enable input
      REGCE => '1',                 -- 1-bit clock enable input
      RST => reset_i,               -- 1-bit reset input
      RSTREG => reset_i,            -- 1-bit output register set/reset
      -- WRCLK, RDCLK: 1-bit (each) Clocks
      RDCLK => pop_clk,                 -- 1-bit read clock input
      WRCLK => push_clk,                 -- 1-bit write clock input
      WREN => push_i                -- 1-bit write enable input
   );
 
end Behavioral;
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.