URL
https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk
Subversion Repositories open8_urisc
[/] [open8_urisc/] [trunk/] [VHDL/] [o8_sys_timer.vhd] - Rev 246
Go to most recent revision | Compare with Previous | Blame | View Log
-- Copyright (c)2006, 2016, 2019, 2020 Jeremy Seth Henry -- All rights reserved. -- -- Redistribution and use in source and binary forms, with or without -- modification, are permitted provided that the following conditions are met: -- * Redistributions of source code must retain the above copyright -- notice, this list of conditions and the following disclaimer. -- * Redistributions in binary form must reproduce the above copyright -- notice, this list of conditions and the following disclaimer in the -- documentation and/or other materials provided with the distribution, -- where applicable (as part of a user interface, debugging port, etc.) -- -- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY -- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY -- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -- -- VHDL Units : o8_sys_timer -- Description: Provides an 8-bit microsecond resolution timer for generating -- : periodic interrupts for the Open8 CPU. -- -- -- Revision History -- Author Date Change ------------------ -------- --------------------------------------------------- -- Seth Henry 07/28/11 Design Start -- Seth Henry 12/19/19 Renamed Tmr_Out to Interrupt -- Seth Henry 04/09/20 Modified timer update logic to reset the timer on -- interval write. -- Seth Henry 04/16/20 Modified to use Open8 bus record -- Seth Henry 05/18/20 Added write qualification input library ieee; use ieee.std_logic_1164.all; use ieee.std_logic_unsigned.all; use ieee.std_logic_arith.all; use ieee.std_logic_misc.all; library work; use work.open8_pkg.all; entity o8_sys_timer is generic( mSec_Resolution : boolean := FALSE; Address : ADDRESS_TYPE ); port( Open8_Bus : in OPEN8_BUS_TYPE; Write_Qual : in std_logic := '1'; Rd_Data : out DATA_TYPE; Interrupt : out std_logic ); end entity; architecture behave of o8_sys_timer is alias Clock is Open8_Bus.Clock; alias Reset is Open8_Bus.Reset; alias uSec_Tick is Open8_Bus.uSec_Tick; constant User_Addr : ADDRESS_TYPE := Address; alias Comp_Addr is Open8_Bus.Address(15 downto 0); signal Addr_Match : std_logic := '0'; signal Wr_En_d : std_logic; signal Wr_En_q : std_logic := '0'; alias Wr_Data_d is Open8_Bus.Wr_Data; signal Wr_Data_q : DATA_TYPE := x"00"; signal Rd_En_d : std_logic := '0'; signal Rd_En_q : std_logic := '0'; signal Interval : DATA_TYPE := x"00"; signal Update_Interval : std_logic; signal Timer_Cnt : DATA_TYPE := x"00"; constant MSEC_DELAY : std_logic_vector(9 downto 0) := conv_std_logic_vector(1000,10); signal mSec_Timer : std_logic_vector(9 downto 0) := (others => '0'); signal Timer_Tick : std_logic := '0'; begin Addr_Match <= '1' when Comp_Addr = User_Addr else '0'; Wr_En_d <= Addr_Match and Open8_Bus.Wr_En; Rd_En_d <= Addr_Match and Open8_Bus.Rd_En; mSec_Resolution_enabled : if( mSec_Resolution )generate mSec_Tick_proc: process( Clock, Reset ) begin if( Reset = Reset_Level )then mSec_Timer <= (others => '0'); Timer_Tick <= '0'; elsif( rising_edge(Clock) )then mSec_Timer <= mSec_Timer - uSec_Tick; Timer_Tick <= '0'; if( mSec_Timer = 0 )then mSec_Timer <= MSEC_DELAY; Timer_Tick <= '1'; end if; end if; end process; end generate; uSec_Resolution_enabled : if( not mSec_Resolution )generate Timer_Tick <= uSec_Tick; end generate; io_reg: process( Clock, Reset ) begin if( Reset = Reset_Level )then Wr_En_q <= '0'; Wr_Data_q <= x"00"; Rd_En_q <= '0'; Rd_Data <= OPEN8_NULLBUS; Interval <= x"00"; Update_Interval <= '0'; elsif( rising_edge( Clock ) )then Wr_En_q <= Wr_En_d; Wr_Data_q <= Wr_Data_d; Update_Interval <= Wr_En_q and Write_Qual; if( Wr_En_q = '1' and Write_Qual = '1' )then Interval <= Wr_Data_q; end if; Rd_Data <= (others => '0'); Rd_En_q <= Rd_En_d; if( Rd_En_q = '1' )then Rd_Data <= Interval; end if; end if; end process; Interval_proc: process( Clock, Reset ) begin if( Reset = Reset_Level )then Timer_Cnt <= x"00"; Interrupt <= '0'; elsif( rising_edge(Clock) )then Interrupt <= '0'; Timer_Cnt <= Timer_Cnt - Timer_Tick; if( Update_Interval = '1' )then Timer_Cnt <= Interval; elsif( or_reduce(Timer_Cnt) = '0' )then Timer_Cnt <= Interval; Interrupt <= or_reduce(Interval); -- Only trigger on Int > 0 end if; end if; end process; end architecture;
Go to most recent revision | Compare with Previous | Blame | View Log