OpenCores
URL https://opencores.org/ocsvn/powersupplysequencer/powersupplysequencer/trunk

Subversion Repositories powersupplysequencer

[/] [powersupplysequencer/] [vhdl/] [msi/] [PowerSequencer/] [PowerSequencer_wave.do] - Rev 2

Compare with Previous | Blame | View Log

onerror {resume}
quietly WaveActivateNextPane {} 0
add wave -noupdate -format Logic /powersequencer_tb/clk
add wave -noupdate -format Logic /powersequencer_tb/rst
add wave -noupdate -divider {Simulation testbed controls}
add wave -noupdate -format Logic /powersequencer_tb/ps1_defective
add wave -noupdate -format Logic /powersequencer_tb/ps2_defective
add wave -noupdate -format Logic /powersequencer_tb/ps3_defective
add wave -noupdate -divider {Control of entire PS array}
add wave -noupdate -format Logic /powersequencer_tb/power_up
add wave -noupdate -format Logic /powersequencer_tb/pu_chain123
add wave -noupdate -format Logic /powersequencer_tb/fail_chain123
add wave -noupdate -format Logic /powersequencer_tb/all_power_good
add wave -noupdate -divider {PS 1}
add wave -noupdate -format Logic /powersequencer_tb/ena_supply1
add wave -noupdate -color Cyan -format Analog-Step -height 50 -max 3.5 /powersequencer_tb/vout1
add wave -noupdate -format Logic /powersequencer_tb/supply1good
add wave -noupdate -format Logic /powersequencer_tb/ups1/timer_do
add wave -noupdate -format Logic /powersequencer_tb/ups1/timer_done
add wave -noupdate -format Literal /powersequencer_tb/ups1/current_state
add wave -noupdate -divider {Handshake between stage 1 and 2}
add wave -noupdate -format Logic /powersequencer_tb/ena_stage2
add wave -noupdate -format Logic /powersequencer_tb/fail_chain23
add wave -noupdate -format Logic /powersequencer_tb/pu_chain23
add wave -noupdate -divider {PS 2}
add wave -noupdate -format Logic /powersequencer_tb/ena_supply2
add wave -noupdate -color Cyan -format Analog-Step -height 50 -max 3.5 /powersequencer_tb/vout2
add wave -noupdate -format Logic /powersequencer_tb/supply2good
add wave -noupdate -format Literal /powersequencer_tb/ups2/current_state
add wave -noupdate -divider {Handshake between stage 2 and 3}
add wave -noupdate -format Logic /powersequencer_tb/ena_stage3
add wave -noupdate -format Logic /powersequencer_tb/fail_chain3
add wave -noupdate -format Logic /powersequencer_tb/pu_chain3
add wave -noupdate -divider {PS 3}
add wave -noupdate -format Logic /powersequencer_tb/ena_supply3
add wave -noupdate -color Cyan -format Analog-Step -height 50 -max 3.5 /powersequencer_tb/vout3
add wave -noupdate -format Logic /powersequencer_tb/supply3good
add wave -noupdate -format Literal /powersequencer_tb/ups3/current_state
TreeUpdate [SetDefaultTree]
WaveRestoreCursors {{Cursor 1} {43565703635 ps} 0}
configure wave -namecolwidth 287
configure wave -valuecolwidth 100
configure wave -justifyvalue left
configure wave -signalnamewidth 0
configure wave -snapdistance 10
configure wave -datasetprefix 0
configure wave -rowmargin 4
configure wave -childrowmargin 2
configure wave -gridoffset 0
configure wave -gridperiod 1
configure wave -griddelta 40
configure wave -timeline 0
configure wave -timelineunits ps
update
WaveRestoreZoom {0 ps} {126 ms}

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2020 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.