OpenCores
URL https://opencores.org/ocsvn/udp_ip_stack/udp_ip_stack/trunk

Subversion Repositories udp_ip_stack

[/] [udp_ip_stack/] [trunk/] [rtl/] [vhdl/] [ml605/] [UDP_Complete.vhd] - Rev 4

Go to most recent revision | Compare with Previous | Blame | View Log

----------------------------------------------------------------------------------
-- Company: 
-- Engineer: 
-- 
-- Create Date:    17:51:18 06/11/2011 
-- Design Name: 
-- Module Name:    UDP_Complete - Behavioral 
-- Project Name: 
-- Target Devices: 
-- Tool versions: 
-- Description: 
--
-- Dependencies: 
--
-- Revision: 
-- Revision 0.01 - File Created
-- Revision 0.02 - separated RX and TX clocks
-- Additional Comments: 
--
----------------------------------------------------------------------------------
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.NUMERIC_STD.ALL;
use work.axi.all;
use work.ipv4_types.all;
use work.arp_types.all;
 
entity UDP_Complete is
    Port (
			-- UDP TX signals
			udp_tx_start			: in std_logic;							-- indicates req to tx UDP
			udp_txi					: in udp_tx_type;							-- UDP tx cxns
			udp_tx_result			: out std_logic_vector (1 downto 0);-- tx status (changes during transmission)
			udp_tx_data_out_ready: out std_logic;							-- indicates udp_tx is ready to take data
			-- UDP RX signals
			udp_rx_start			: out std_logic;							-- indicates receipt of udp header
			udp_rxo					: out udp_rx_type;
			-- IP RX signals
			ip_rx_hdr				: out ipv4_rx_header_type;
			-- system signals
			clk_in_p             : in  std_logic;     	 				-- 200MHz clock input from board
			clk_in_n             : in  std_logic;
			clk_out					: out std_logic;
			reset 					: in  STD_LOGIC;
			our_ip_address 		: in STD_LOGIC_VECTOR (31 downto 0);
			our_mac_address 		: in std_logic_vector (47 downto 0);
			-- status signals
			arp_pkt_count			: out STD_LOGIC_VECTOR(7 downto 0);			-- count of arp pkts received
			ip_pkt_count			: out STD_LOGIC_VECTOR(7 downto 0);			-- number of IP pkts received for us
			-- GMII Interface
			phy_resetn           : out std_logic;
			gmii_txd             : out std_logic_vector(7 downto 0);
			gmii_tx_en           : out std_logic;
			gmii_tx_er           : out std_logic;
			gmii_tx_clk          : out std_logic;
			gmii_rxd             : in  std_logic_vector(7 downto 0);
			gmii_rx_dv           : in  std_logic;
			gmii_rx_er           : in  std_logic;
			gmii_rx_clk          : in  std_logic;
			gmii_col             : in  std_logic;
			gmii_crs             : in  std_logic;
			mii_tx_clk           : in  std_logic
			);
end UDP_Complete;
 
architecture structural of UDP_Complete is
 
  ------------------------------------------------------------------------------
  -- Component Declaration for UDP complete no mac
  ------------------------------------------------------------------------------
 
    COMPONENT UDP_Complete_nomac
    PORT(
			-- UDP TX signals
			udp_tx_start			: in std_logic;							-- indicates req to tx UDP
			udp_txi					: in udp_tx_type;							-- UDP tx cxns
			udp_tx_result			: out std_logic_vector (1 downto 0);-- tx status (changes during transmission)
			udp_tx_data_out_ready: out std_logic;							-- indicates udp_tx is ready to take data
			-- UDP RX signals
			udp_rx_start			: out std_logic;							-- indicates receipt of udp header
			udp_rxo					: out udp_rx_type;
			-- IP RX signals
			ip_rx_hdr				: out ipv4_rx_header_type;
			-- system signals
			rx_clk					: in  STD_LOGIC;
			tx_clk					: in  STD_LOGIC;
			reset 					: in  STD_LOGIC;
			our_ip_address 		: in STD_LOGIC_VECTOR (31 downto 0);
			our_mac_address 		: in std_logic_vector (47 downto 0);
			-- status signals
			arp_pkt_count			: out STD_LOGIC_VECTOR(7 downto 0);			-- count of arp pkts received
			ip_pkt_count			: out STD_LOGIC_VECTOR(7 downto 0);			-- number of IP pkts received for us
			-- MAC Transmitter
			mac_tx_tdata         : out  std_logic_vector(7 downto 0);	-- data byte to tx
			mac_tx_tvalid        : out  std_logic;							-- tdata is valid
			mac_tx_tready        : in std_logic;							-- mac is ready to accept data
			mac_tx_tfirst        : out  std_logic;							-- indicates first byte of frame
			mac_tx_tlast         : out  std_logic;							-- indicates last byte of frame
			-- MAC Receiver
			mac_rx_tdata         : in std_logic_vector(7 downto 0);	-- data byte received
			mac_rx_tvalid        : in std_logic;							-- indicates tdata is valid
			mac_rx_tready        : out  std_logic;							-- tells mac that we are ready to take data
			mac_rx_tlast         : in std_logic								-- indicates last byte of the trame
			);
    END COMPONENT;
 
 
  ------------------------------------------------------------------------------
  -- Component Declaration for the MAC layer
  ------------------------------------------------------------------------------
component mac_layer
	 port (
			-- System controls
			------------------
			glbl_rst                      : in  std_logic;	      				-- asynchronous reset
			mac_reset                   	: in  std_logic;							-- reset mac layer
			clk_in_p              			: in  std_logic;     	 				-- 200MHz clock input from board
			clk_in_n              			: in  std_logic;
 
			-- MAC Transmitter (AXI-S) Interface
			---------------------------------------------
			mac_tx_clock              		: out  std_logic;							-- data sampled on rising edge
			mac_tx_tdata         			: in  std_logic_vector(7 downto 0);	-- data byte to tx
			mac_tx_tvalid        			: in  std_logic;							-- tdata is valid
			mac_tx_tready        			: out std_logic;							-- mac is ready to accept data
			mac_tx_tlast         			: in  std_logic;							-- indicates last byte of frame
 
			-- MAC Receiver (AXI-S) Interface
			------------------------------------------
			mac_rx_clock              		: out  std_logic;							-- data valid on rising edge
			mac_rx_tdata         			: out std_logic_vector(7 downto 0);	-- data byte received
			mac_rx_tvalid        			: out std_logic;							-- indicates tdata is valid
			mac_rx_tready        			: in  std_logic;							-- tells mac that we are ready to take data
			mac_rx_tlast         			: out std_logic;							-- indicates last byte of the trame
 
			-- GMII Interface
			-----------------     
			phy_resetn            			: out std_logic;
			gmii_txd                      : out std_logic_vector(7 downto 0);
			gmii_tx_en                    : out std_logic;
			gmii_tx_er                    : out std_logic;
			gmii_tx_clk                   : out std_logic;
			gmii_rxd                      : in  std_logic_vector(7 downto 0);
			gmii_rx_dv                    : in  std_logic;
			gmii_rx_er                    : in  std_logic;
			gmii_rx_clk                   : in  std_logic;
			gmii_col                      : in  std_logic;
			gmii_crs                      : in  std_logic;
			mii_tx_clk                    : in  std_logic
	 );
end component;
 
 
	---------------------------
	-- Signals
	---------------------------
 
	-- MAC RX bus
	signal mac_rx_clock			: std_logic;
	signal mac_rx_tdata			: std_logic_vector (7 downto 0);
	signal mac_rx_tvalid			: std_logic;
	signal mac_rx_tready			: std_logic;
	signal mac_rx_tlast			: std_logic;
	-- MAC TX bus
	signal mac_tx_clock			: std_logic;
	signal mac_tx_tdata			: std_logic_vector (7 downto 0);
	signal mac_tx_tvalid			: std_logic;
	signal mac_tx_tready			: std_logic;
	signal mac_tx_tlast			: std_logic;
	-- control signals
	signal mac_tx_tready_int	: std_logic;
	signal mac_tx_granted_int	: std_logic;
 
 
begin
 
 
	process (mac_tx_clock)
	begin
		-- output followers
		clk_out <= mac_tx_clock;
	end process;
 
   ------------------------------------------------------------------------------
   -- Instantiate the UDP layer
   ------------------------------------------------------------------------------
 
   udp_block: UDP_Complete_nomac PORT MAP (
			 -- UDP TX signals
          udp_tx_start 			=> udp_tx_start,
          udp_txi 				=> udp_txi,
          udp_tx_result			=> udp_tx_result,
          udp_tx_data_out_ready => udp_tx_data_out_ready,
 			 -- UDP RX signals
          udp_rx_start 			=> udp_rx_start,
          udp_rxo 				=> udp_rxo,
 			 -- IP RX signals
          ip_rx_hdr 				=> ip_rx_hdr,
			 -- system signals
          rx_clk					=> mac_rx_clock,
          tx_clk					=> mac_tx_clock,
          reset 					=> reset,
          our_ip_address 		=> our_ip_address,
          our_mac_address 		=> our_mac_address,
			 -- status signals
          arp_pkt_count 		=> arp_pkt_count,
          ip_pkt_count 			=> ip_pkt_count,
 
			 -- MAC Transmitter
          mac_tx_tready 		=> mac_tx_tready_int,
          mac_tx_tvalid 		=> mac_tx_tvalid,
			 mac_tx_tfirst			=> open,
          mac_tx_tlast 			=> mac_tx_tlast,
          mac_tx_tdata 			=> mac_tx_tdata,
		    -- MAC Receiver
          mac_rx_tdata 			=> mac_rx_tdata,
          mac_rx_tvalid		 	=> mac_rx_tvalid,
			 mac_rx_tready			=> mac_rx_tready,
          mac_rx_tlast 			=> mac_rx_tlast
        );
 
 
   ------------------------------------------------------------------------------
   -- Instantiate the MAC layer
   ------------------------------------------------------------------------------
	mac_block : mac_layer
		 Port map( 
				-- System controls
				------------------
				glbl_rst				=> reset,
				mac_reset         => '0',
				clk_in_p          => clk_in_p,
				clk_in_n          => clk_in_n,      
 
				-- MAC Transmitter (AXI-S) Interface
				---------------------------------------------
				mac_tx_clock      => mac_tx_clock,
				mac_tx_tdata      => mac_tx_tdata,
				mac_tx_tvalid     => mac_tx_tvalid,
				mac_tx_tready     => mac_tx_tready_int,
				mac_tx_tlast      => mac_tx_tlast,
 
				-- MAC Receiver (AXI-S) Interface
				------------------------------------------
				mac_rx_clock      => mac_rx_clock,
				mac_rx_tdata      => mac_rx_tdata,
				mac_rx_tvalid     => mac_rx_tvalid,
				mac_rx_tready     => mac_rx_tready,
				mac_rx_tlast      => mac_rx_tlast,
 
				-- GMII Interface
				-----------------     
				phy_resetn        => phy_resetn,
				gmii_txd        	=> gmii_txd,
				gmii_tx_en        => gmii_tx_en,
				gmii_tx_er        => gmii_tx_er,
				gmii_tx_clk       => gmii_tx_clk,
				gmii_rxd        	=> gmii_rxd,
				gmii_rx_dv        => gmii_rx_dv,
				gmii_rx_er        => gmii_rx_er,
				gmii_rx_clk       => gmii_rx_clk,
				gmii_col       	=> gmii_col,
				gmii_crs        	=> gmii_crs,
				mii_tx_clk        => mii_tx_clk
 			  );
 
 
end structural;
 
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.