Subversion Repositories z80soc

library IEEE;
use  IEEE.STD_LOGIC_1164.all;
use  IEEE.STD_LOGIC_ARITH.all;
use  IEEE.STD_LOGIC_UNSIGNED.all;
 
ENTITY clk_div IS
 
	PORT
	(
	   clock_in_50Mhz       : IN  STD_LOGIC;
      clock_25MHz          : OUT STD_LOGIC;
		clock_10MHz          : OUT STD_LOGIC;
		clock_357Mhz         : OUT STD_LOGIC;
		clock_1MHz				: OUT	STD_LOGIC;
		clock_100KHz			: OUT	STD_LOGIC;
		clock_10KHz				: OUT	STD_LOGIC;
		clock_1KHz				: OUT	STD_LOGIC;
		clock_100Hz				: OUT	STD_LOGIC;
		clock_10Hz				: OUT	STD_LOGIC;
		clock_1Hz				: OUT	STD_LOGIC);
 
END clk_div;
 
ARCHITECTURE a OF clk_div IS
 
	SIGNAL	count_1Mhz: STD_LOGIC_VECTOR(4 DOWNTO 0);
   SIGNAL   count_357Mhz: STD_LOGIC_VECTOR(3 DOWNTO 0);
	SIGNAL	count_10Mhz: STD_LOGIC_VECTOR(2 DOWNTO 0);
	SIGNAL	count_100Khz, count_10Khz, count_1Khz : STD_LOGIC_VECTOR(2 DOWNTO 0);
	SIGNAL	count_100hz, count_10hz, count_1hz : STD_LOGIC_VECTOR(2 DOWNTO 0);
	SIGNAL   clock_25Mhz_int, clock_10Mhz_int, clock_357Mhz_int, clock_1Mhz_int, clock_100Khz_int, clock_10Khz_int, clock_1Khz_int: STD_LOGIC; 
	SIGNAL	clock_100hz_int, clock_10Hz_int, clock_1Hz_int : STD_LOGIC;
 
BEGIN
 
--  Generate 25Mhz Clock
	PROCESS
	BEGIN
		WAIT UNTIL clock_in_50Mhz'EVENT and clock_in_50Mhz = '1';
			clock_25Mhz_int <= not clock_25Mhz_int;
 
-- Ripple clocks are used in this code to save prescalar hardware
-- Sync all clock prescalar outputs back to master clock signal
			clock_25MHz   <= clock_25Mhz_int;
			clock_10MHz   <= clock_10Mhz_int;
			clock_357MHz  <= clock_357Mhz_int;			
			clock_1Mhz    <= clock_1Mhz_int;
			clock_100Khz  <= clock_100Khz_int;
			clock_10Khz   <= clock_10Khz_int;
			clock_1Khz    <= clock_1Khz_int;
			clock_100hz   <= clock_100hz_int;
			clock_10hz    <= clock_10hz_int;
			clock_1hz     <= clock_1hz_int;
 
	END PROCESS;	
 
-- Generate Clock 10Mhz
	PROCESS 
	BEGIN
		WAIT UNTIL clock_in_50Mhz'EVENT and clock_in_50Mhz = '1';
			IF count_10Mhz = 5 THEN
				count_10Mhz <= "000";
				clock_10Mhz_int <= not clock_10Mhz_int;
			ELSE
				count_10Mhz <= count_10Mhz + 1; 
			END IF;	
	END PROCESS;	
 
	-- Generate Clock 3.57Mhz
	PROCESS
	BEGIN
		WAIT UNTIL clock_in_50Mhz'EVENT and clock_in_50Mhz = '1';
			IF count_357Mhz < "1110" THEN
				count_357Mhz <= count_357Mhz + 1;
			ELSE
				count_357Mhz <= "0000";
				clock_357Mhz_int <= not clock_357Mhz_int;
			END IF;
	END PROCESS;
 
--  Generate Clock 1Mhz
	PROCESS 
	BEGIN
		WAIT UNTIL clock_25Mhz_int'EVENT and clock_25Mhz_int = '1';
			IF count_1Mhz < 24 THEN
				count_1Mhz <= count_1Mhz + 1;
			ELSE
				count_1Mhz <= "00000";
			END IF;
			IF count_1Mhz < 12 THEN
				clock_1Mhz_int <= '0';
			ELSE
				clock_1Mhz_int <= '1';
			END IF;	
	END PROCESS;
 
-- Divide by 10
	PROCESS 
	BEGIN
		WAIT UNTIL clock_1Mhz_int'EVENT and clock_1Mhz_int = '1';
			IF count_100Khz /= 4 THEN
				count_100Khz <= count_100Khz + 1;
			ELSE
				count_100khz <= "000";
				clock_100Khz_int <= NOT clock_100Khz_int;
			END IF;
	END PROCESS;	
 
-- Divide by 10
	PROCESS
	BEGIN
		WAIT UNTIL clock_100Khz_int'EVENT and clock_100Khz_int = '1';
			IF count_10Khz /= 4 THEN
				count_10Khz <= count_10Khz + 1;
			ELSE
				count_10khz <= "000";
				clock_10Khz_int <= NOT clock_10Khz_int;
			END IF;
	END PROCESS;	
 
-- Divide by 10
	PROCESS 
	BEGIN
		WAIT UNTIL clock_10Khz_int'EVENT and clock_10Khz_int = '1';
			IF count_1Khz /= 4 THEN
				count_1Khz <= count_1Khz + 1;
			ELSE
				count_1khz <= "000";
				clock_1Khz_int <= NOT clock_1Khz_int;
			END IF;
	END PROCESS;	
 
-- Divide by 10
	PROCESS 
	BEGIN
		WAIT UNTIL clock_1Khz_int'EVENT and clock_1Khz_int = '1';
			IF count_100hz /= 4 THEN
				count_100hz <= count_100hz + 1;
			ELSE
				count_100hz <= "000";
				clock_100hz_int <= NOT clock_100hz_int;
			END IF;
	END PROCESS;	
 
-- Divide by 10
	PROCESS 
	BEGIN
		WAIT UNTIL clock_100hz_int'EVENT and clock_100hz_int = '1';
			IF count_10hz /= 4 THEN
				count_10hz <= count_10hz + 1;
			ELSE
				count_10hz <= "000";
				clock_10hz_int <= NOT clock_10hz_int;
			END IF;
	END PROCESS;	
 
-- Divide by 10
	PROCESS
	BEGIN
		WAIT UNTIL clock_10hz_int'EVENT and clock_10hz_int = '1';
			IF count_1hz /= 4 THEN
				count_1hz <= count_1hz + 1;
			ELSE
				count_1hz <= "000";
				clock_1hz_int <= NOT clock_1hz_int;
			END IF;
	END PROCESS;	
 
END a;