OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [Makefile] - Rev 207

Go to most recent revision | Compare with Previous | Blame | View Log

################################################################################
#
# Filename:     Makefile
#
# Project:      Zip CPU -- a small, lightweight, RISC CPU soft core
#
# Purpose:      This is a grand makefile for the entire project.  It will
#               build the assembler, and a Verilog testbench, and then
#               even test the CPU via that test bench.
#
#       Targets include:
#
#               bench   Build the CPP test bench/debugger facility.
#
#               doc     Build the ZipCPU chip specification and the GPL
#                       license.  These should be distributed pre-built, but
#                       you are welcome to rebuild them if you would like.
#
#               rtl     Run Verilator on the RTL
#
#               sw      Build the obsolete assembler, binutils, and GCC.  By
#                       default, this also 'install's the compiler into the
#                       sw/install/ subdirectory as well.
#
#               test    Run the test bench on the assembler test file.
#
#
# Creator:      Dan Gisselquist, Ph.D.
#               Gisselquist Technology, LLC
#
################################################################################
#
# Copyright (C) 2015-2016, Gisselquist Technology, LLC
#
# This program is free software (firmware): you can redistribute it and/or
# modify it under the terms of  the GNU General Public License as published
# by the Free Software Foundation, either version 3 of the License, or (at
# your option) any later version.
#
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
# for more details.
#
# License:      GPL, v3, as defined and found on www.gnu.org,
#               http://www.gnu.org/licenses/gpl.html
#
#
################################################################################
#
.PHONY: all
all: rtl sw

MAKE := make    # Was `which make`
SUBMAKE := $(MAKE) --no-print-directory

.PHONY: doc
doc:
        @echo "Building docs"; cd doc;
        +@$(SUBMAKE) --directory=doc/

.PHONY: rtl
rtl:
        @echo "Building rtl for Verilator";
        +@$(SUBMAKE) --directory=rtl/

.PHONY: sw
sw:
        @echo "Building toolchain";
        +@$(SUBMAKE) --directory=sw/

.PHONY: sim
sim:    cppsim vsim

cppsim:
        @echo "Building in C++ simulator";
        +@$(SUBMAKE) --directory=sim/cpp

vsim: rtl
        @echo "Building Verilator simulator";
        +@$(SUBMAKE) --directory=sim/verilator

clean:
        +@$(SUBMAKE) --directory=rtl
        +@$(SUBMAKE) --directory=sw
        +@$(SUBMAKE) --directory=sim/cpp
        +@$(SUBMAKE) --directory=sim/verilator
        +@$(SUBMAKE) --directory=bench/asm
        +@$(SUBMAKE) --directory=bench/cpp

# .PHONY: bench
# bench: rtl sw
        # @echo "Building in bench/rtl"; $(SUBMAKE) --directory=bench/rtl
        # @echo "Building in bench/cpp"; $(SUBMAKE) --directory=bench/cpp
        # @echo "Building in bench/asm"; $(SUBMAKE) --directory=bench/asm

# .PHONY: test
# test: sw rtl
        # @echo "Building zasm test"; cd sw/zasm; $(MAKE) test --no-print-directory
        # @echo "Bench test"; cd bench/cpp; $(MAKE) test --no-print-directory

# .PHONY: dhrystone
# dhrystone: sw bench
        # @echo "Building Asm Dhrystone"; $(SUBMAKE) zipdhry.z --no-print-directory
        # @echo "Running Dhrystone"; cd bench/cpp; $(SUBMAKE) dhrystone --no-print-directory

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.