OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [bench/] [asm/] [Makefile] - Rev 209

Compare with Previous | Blame | View Log

################################################################################
##
## Filename:    Makefile
##
## Project:     Zip CPU -- a small, lightweight, RISC CPU soft core
##
## Purpose:     To direct and simplify the build of a variety of simple assembly
##              language test programs which will use one (or both) of the
##      ZipCPU simulators.
##
## Targets include:
##
##      hellosim
##              Using the SIM instruction, prints Hello World to the screen.
##
##      simuart
##              Same as hellosim, but without using the SIM instruction.  This
##              *should* be able to run successfully on a verilated or
##              synthesized hardware, although I hvae yet to test it there.
##
##      simtest
##              A set of simple tests designed to demonstrate if the simulator
##              works or not.
##
##      clean
##              Removes the object file directory and any executables that have
##              been created.
##
##      None of the files/targets below have any dependencies, or if they did,
##      GCC can't determine them, so thus there is no make depends step.
##
##      To actually run one of these programs, list the program on the command
##      line with the ZipCPU simulator, zsim.
##
##
##
## Creator:     Dan Gisselquist, Ph.D.
##              Gisselquist Technology, LLC
##
################################################################################
##
## Copyright (C) 2017, Gisselquist Technology, LLC
##
## This program is free software (firmware): you can redistribute it and/or
## modify it under the terms of  the GNU General Public License as published
## by the Free Software Foundation, either version 3 of the License, or (at
## your option) any later version.
##
## This program is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with this program.  (It's in the $(ROOT)/doc directory.  Run make with no
## target there if the PDF file isn't present.)  If not, see
## <http://www.gnu.org/licenses/> for a copy.
##
## License:     GPL, v3, as defined and found on www.gnu.org,
##              http://www.gnu.org/licenses/gpl.html
##
##
################################################################################
##
##
.PHONY: all
all:
PROGRAMS := hellosim simuart simtest cmptest
all: $(PROGRAMS)

CC      := zip-gcc
CPP     := zip-cpp
AS      := zip-as
LD      := zip-ld
OBJDUMP := zip-objdump
OBJDIR := obj-zip
CFLAGS := -O3
LIBD   := ../../sw/install/cross-tools/zip/lib
LIBS   := -L$(LIBD) -lzipbasic
LDSCRIPT:= ./simscript.ld

$(OBJDIR)/%.o: %.c
        $(mk-objdir)
        $(CC) $(CFLAGS) -c $< -o $@

$(OBJDIR)/%.o: %.s
        $(mk-objdir)
        $(AS) $< -o $@

%.txt: %
        $(OBJDUMP) -dr $< > $@

#
# hellosim
#
# This is an assembly version of Hello World that uses the new SIM instructions.
# It should fail with an illegal instruction error if it is ever tried on an
# RTL-synthesized implementation
#
hellosim: $(OBJDIR)/hellosim.o
        $(LD) -T $(LDSCRIPT) $< -o $@

#
# simuart
#
# This is an assembly version of Hello World that uses the UART in the 
# process.  It doesn't use newlib or any other support tools, just binutils.
#
simuart: $(OBJDIR)/simuart.o
        $(LD) -T $(LDSCRIPT) $< -o $@

#
# simtest
#
# This is just a simple series of instruction tests that should be able to be
# used to determine whether the simulator has a basic amount of functionality.
# Because the test includes #define, #ifdef, and #endif statements, though, it
# needs to be run through the C pre-processor before it can go through the
# assembler.  Hence the build is a tocuh trickier, but still simple enough.
#
$(OBJDIR)/simtest.o: simtest.s
        $(mk-objdir)
        $(CPP) $< > $(OBJDIR)/simtest.s
        $(AS) $(OBJDIR)/simtest.s -o $@

simtest: $(OBJDIR)/simtest.o
        $(LD) -T $(LDSCRIPT) $< -o $@

cmptest: $(OBJDIR)/cmptest.o
        $(LD) -T $(LDSCRIPT) -Map=map.txt $< -o $@


define  mk-objdir
        @bash -c "if [[ ! -e $(OBJDIR) ]]; then mkdir -p $(OBJDIR)/; fi"
endef

tags: $(wildcard *.c) $(wildcard *.h) $(wildcard *.cpp)
        @echo "Generating tags"
        @ctags $(wildcard *.c) $(wildcard *.h)

.PHONY: clean
clean:
        rm -rf $(OBJDIR)/
        rm -rf $(PROGRAMS)

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.