OpenCores
URL https://opencores.org/ocsvn/zipcpu/zipcpu/trunk

Subversion Repositories zipcpu

[/] [zipcpu/] [trunk/] [sw/] [gcc-zippatch.patch] - Rev 114

Go to most recent revision | Compare with Previous | Blame | View Log

diff -Naur '--exclude=*.swp' gcc-5.3.0-original/config.sub gcc-5.3.0-zip/config.sub
--- gcc-5.3.0-original/config.sub	2015-01-02 04:30:21.000000000 -0500
+++ gcc-5.3.0-zip/config.sub	2016-01-30 12:27:56.023073747 -0500
@@ -316,7 +316,7 @@
 	| visium \
 	| we32k \
 	| x86 | xc16x | xstormy16 | xtensa \
-	| z8k | z80)
+	| z8k | z80 | zip)
 		basic_machine=$basic_machine-unknown
 		;;
 	c54x)
@@ -1547,6 +1547,9 @@
 # system, and we'll never get to this point.
 
 case $basic_machine in
+	zip-*)
+		os=-elf
+		;;
 	score-*)
 		os=-elf
 		;;
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/configure gcc-5.3.0-zip/configure
--- gcc-5.3.0-original/configure	2015-05-03 13:29:57.000000000 -0400
+++ gcc-5.3.0-zip/configure	2016-01-30 16:19:48.264867231 -0500
@@ -3927,6 +3927,8 @@
   vax-*-*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
+  zip*)
+    noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb gprof"
 esac
 
 # If we aren't building newlib, then don't build libgloss, since libgloss
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/configure.ac gcc-5.3.0-zip/configure.ac
--- gcc-5.3.0-original/configure.ac	2015-05-03 13:29:57.000000000 -0400
+++ gcc-5.3.0-zip/configure.ac	2016-02-12 10:47:23.847194843 -0500
@@ -1274,6 +1274,10 @@
   vax-*-*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
+  zip*)
+    noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb gprof"
+    unsupported_languages="$unsupported_languages fortran java"
+    ;;
 esac
 
 # If we aren't building newlib, then don't build libgloss, since libgloss
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/cgraphbuild.c gcc-5.3.0-zip/gcc/cgraphbuild.c
--- gcc-5.3.0-original/gcc/cgraphbuild.c	2015-01-09 15:18:42.000000000 -0500
+++ gcc-5.3.0-zip/gcc/cgraphbuild.c	2016-03-24 22:13:24.815287808 -0400
@@ -62,6 +62,13 @@
 #include "ipa-prop.h"
 #include "ipa-inline.h"
 
+#ifdef	DO_ZIP_DEBUGS
+extern void zip_debug_rtx(const_rtx);
+#define	ZIP_DEBUG_LINE(STR,RTX) do { fprintf(stderr, "%s:%d/%s\n", __FILE__,__LINE__,STR); zip_debug_rtx(RTX); } while(0)
+#else
+#define	ZIP_DEBUG_LINE(STR,RTX)
+#endif
+
 /* Context of record_reference.  */
 struct record_reference_ctx
 {
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/common/config/zip/zip-common.c gcc-5.3.0-zip/gcc/common/config/zip/zip-common.c
--- gcc-5.3.0-original/gcc/common/config/zip/zip-common.c	1969-12-31 19:00:00.000000000 -0500
+++ gcc-5.3.0-zip/gcc/common/config/zip/zip-common.c	2016-02-14 00:54:31.821055716 -0500
@@ -0,0 +1,52 @@
+////////////////////////////////////////////////////////////////////////////////
+//
+// Filename: 	common/config/zip/zip-common.c
+//
+// Project:	Zip CPU backend for the GNU Compiler Collection
+//
+// Purpose:	To eliminate the frame register automatically.
+//
+// Creator:	Dan Gisselquist, Ph.D.
+//		Gisselquist Technology, LLC
+//
+////////////////////////////////////////////////////////////////////////////////
+//
+// Copyright (C) 2016, Gisselquist Technology, LLC
+//
+// This program is free software (firmware): you can redistribute it and/or
+// modify it under the terms of  the GNU General Public License as published
+// by the Free Software Foundation, either version 3 of the License, or (at
+// your option) any later version.
+//
+// This program is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with this program.  (It's in the $(ROOT)/doc directory, run make with no
+// target there if the PDF file isn't present.)  If not, see
+// <http://www.gnu.org/licenses/> for a copy.
+//
+// License:	GPL, v3, as defined and found on www.gnu.org,
+//		http://www.gnu.org/licenses/gpl.html
+//
+//
+////////////////////////////////////////////////////////////////////////////////
+#include "config.h"
+#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
+#include "common/common-target.h"
+#include "common/common-target-def.h"
+
+static const struct default_options zip_option_optimization_table[] =
+  {
+    { OPT_LEVELS_1_PLUS, OPT_fomit_frame_pointer, NULL, 1 },
+    { OPT_LEVELS_NONE, 0, NULL, 0 }
+  };
+
+#undef	TARGET_OPTION_OPTIMIZATION_TABLE
+#define	TARGET_OPTION_OPTIMIZATION_TABLE	zip_option_optimization_table
+
+struct gcc_targetm_common	targetm_common = TARGETM_COMMON_INITIALIZER;
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/aarch64/aarch64-linux.h gcc-5.3.0-zip/gcc/config/aarch64/aarch64-linux.h
--- gcc-5.3.0-original/gcc/config/aarch64/aarch64-linux.h	2016-03-25 11:55:15.492451356 -0400
+++ gcc-5.3.0-zip/gcc/config/aarch64/aarch64-linux.h	2015-07-24 12:00:26.000000000 -0400
@@ -21,7 +21,7 @@
 #ifndef GCC_AARCH64_LINUX_H
 #define GCC_AARCH64_LINUX_H
 
-#define GLIBC_DYNAMIC_LINKER "/tools/lib/ld-linux-aarch64%{mbig-endian:_be}%{mabi=ilp32:_ilp32}.so.1"
+#define GLIBC_DYNAMIC_LINKER "/lib/ld-linux-aarch64%{mbig-endian:_be}%{mabi=ilp32:_ilp32}.so.1"
 
 #undef  ASAN_CC1_SPEC
 #define ASAN_CC1_SPEC "%{%:sanitize(address):-funwind-tables}"
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/alpha/linux-elf.h gcc-5.3.0-zip/gcc/config/alpha/linux-elf.h
--- gcc-5.3.0-original/gcc/config/alpha/linux-elf.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/alpha/linux-elf.h	2015-01-05 07:33:28.000000000 -0500
@@ -23,8 +23,8 @@
 #define EXTRA_SPECS \
 { "elf_dynamic_linker", ELF_DYNAMIC_LINKER },
 
-#define GLIBC_DYNAMIC_LINKER	"/tools/lib/ld-linux.so.2"
-#define UCLIBC_DYNAMIC_LINKER "/tools/lib/ld-uClibc.so.0"
+#define GLIBC_DYNAMIC_LINKER	"/lib/ld-linux.so.2"
+#define UCLIBC_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
 #if DEFAULT_LIBC == LIBC_UCLIBC
 #define CHOOSE_DYNAMIC_LINKER(G, U) "%{mglibc:" G ";:" U "}"
 #elif DEFAULT_LIBC == LIBC_GLIBC
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/arm/linux-eabi.h gcc-5.3.0-zip/gcc/config/arm/linux-eabi.h
--- gcc-5.3.0-original/gcc/config/arm/linux-eabi.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/arm/linux-eabi.h	2015-01-05 07:33:28.000000000 -0500
@@ -68,8 +68,8 @@
    GLIBC_DYNAMIC_LINKER_DEFAULT and TARGET_DEFAULT_FLOAT_ABI.  */
 
 #undef  GLIBC_DYNAMIC_LINKER
-#define GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "/tools/lib/ld-linux.so.3"
-#define GLIBC_DYNAMIC_LINKER_HARD_FLOAT "/tools/lib/ld-linux-armhf.so.3"
+#define GLIBC_DYNAMIC_LINKER_SOFT_FLOAT "/lib/ld-linux.so.3"
+#define GLIBC_DYNAMIC_LINKER_HARD_FLOAT "/lib/ld-linux-armhf.so.3"
 #define GLIBC_DYNAMIC_LINKER_DEFAULT GLIBC_DYNAMIC_LINKER_SOFT_FLOAT
 
 #define GLIBC_DYNAMIC_LINKER \
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/arm/linux-elf.h gcc-5.3.0-zip/gcc/config/arm/linux-elf.h
--- gcc-5.3.0-original/gcc/config/arm/linux-elf.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/arm/linux-elf.h	2015-06-23 05:26:54.000000000 -0400
@@ -62,7 +62,7 @@
 
 #define LIBGCC_SPEC "%{mfloat-abi=soft*:-lfloat} -lgcc"
 
-#define GLIBC_DYNAMIC_LINKER "/tools/lib/ld-linux.so.2"
+#define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2"
 
 #define LINUX_TARGET_LINK_SPEC  "%{h*} \
    %{static:-Bstatic} \
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/bfin/linux.h gcc-5.3.0-zip/gcc/config/bfin/linux.h
--- gcc-5.3.0-original/gcc/config/bfin/linux.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/bfin/linux.h	2015-01-05 07:33:28.000000000 -0500
@@ -45,7 +45,7 @@
   %{shared:-G -Bdynamic} \
   %{!shared: %{!static: \
    %{rdynamic:-export-dynamic} \
-   -dynamic-linker /tools/lib/ld-uClibc.so.0} \
+   -dynamic-linker /lib/ld-uClibc.so.0} \
    %{static}} -init __init -fini __fini"
 
 #undef TARGET_SUPPORTS_SYNC_CALLS
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/cris/linux.h gcc-5.3.0-zip/gcc/config/cris/linux.h
--- gcc-5.3.0-original/gcc/config/cris/linux.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/cris/linux.h	2015-01-05 07:33:28.000000000 -0500
@@ -102,7 +102,7 @@
 #undef CRIS_DEFAULT_CPU_VERSION
 #define CRIS_DEFAULT_CPU_VERSION CRIS_CPU_NG
 
-#define GLIBC_DYNAMIC_LINKER "/tools/lib/ld.so.1"
+#define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
 
 #undef CRIS_LINK_SUBTARGET_SPEC
 #define CRIS_LINK_SUBTARGET_SPEC \
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/freebsd-spec.h gcc-5.3.0-zip/gcc/config/freebsd-spec.h
--- gcc-5.3.0-original/gcc/config/freebsd-spec.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/freebsd-spec.h	2015-06-25 13:53:14.000000000 -0400
@@ -129,9 +129,9 @@
 #endif
 
 #if FBSD_MAJOR < 6
-#define FBSD_DYNAMIC_LINKER "/tools/libexec/ld-elf.so.1"
+#define FBSD_DYNAMIC_LINKER "/usr/libexec/ld-elf.so.1"
 #else
-#define FBSD_DYNAMIC_LINKER "/tools/libexec/ld-elf.so.1"
+#define FBSD_DYNAMIC_LINKER "/libexec/ld-elf.so.1"
 #endif
 
 /* NOTE: The freebsd-spec.h header is included also for various
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/frv/linux.h gcc-5.3.0-zip/gcc/config/frv/linux.h
--- gcc-5.3.0-original/gcc/config/frv/linux.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/frv/linux.h	2015-01-05 07:33:28.000000000 -0500
@@ -34,7 +34,7 @@
 #define ENDFILE_SPEC \
   "%{shared|pie:crtendS.o%s;:crtend.o%s} crtn.o%s"
 
-#define GLIBC_DYNAMIC_LINKER "/tools/lib/ld.so.1"
+#define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
 
 #undef LINK_SPEC
 #define LINK_SPEC "\
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/i386/gnu.h gcc-5.3.0-zip/gcc/config/i386/gnu.h
--- gcc-5.3.0-original/gcc/config/i386/gnu.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/i386/gnu.h	2015-01-05 07:33:28.000000000 -0500
@@ -22,7 +22,7 @@
 #define GNU_USER_LINK_EMULATION "elf_i386"
 
 #undef GNU_USER_DYNAMIC_LINKER
-#define GNU_USER_DYNAMIC_LINKER "/tools/lib/ld.so"
+#define GNU_USER_DYNAMIC_LINKER "/lib/ld.so"
 
 #undef	STARTFILE_SPEC
 #if defined HAVE_LD_PIE
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/i386/kfreebsd-gnu64.h gcc-5.3.0-zip/gcc/config/i386/kfreebsd-gnu64.h
--- gcc-5.3.0-original/gcc/config/i386/kfreebsd-gnu64.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/i386/kfreebsd-gnu64.h	2015-01-05 07:33:28.000000000 -0500
@@ -22,6 +22,6 @@
 #define GNU_USER_LINK_EMULATION64 "elf_x86_64_fbsd"
 #define GNU_USER_LINK_EMULATIONX32 "elf32_x86_64_fbsd"
 
-#define GLIBC_DYNAMIC_LINKER32 "/tools/lib/ld.so.1"
-#define GLIBC_DYNAMIC_LINKER64 "/tools/lib/ld-kfreebsd-x86-64.so.1"
-#define GLIBC_DYNAMIC_LINKERX32 "/tools/lib/ld-kfreebsd-x32.so.1"
+#define GLIBC_DYNAMIC_LINKER32 "/lib/ld.so.1"
+#define GLIBC_DYNAMIC_LINKER64 "/lib/ld-kfreebsd-x86-64.so.1"
+#define GLIBC_DYNAMIC_LINKERX32 "/lib/ld-kfreebsd-x32.so.1"
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/i386/kfreebsd-gnu.h gcc-5.3.0-zip/gcc/config/i386/kfreebsd-gnu.h
--- gcc-5.3.0-original/gcc/config/i386/kfreebsd-gnu.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/i386/kfreebsd-gnu.h	2015-01-05 07:33:28.000000000 -0500
@@ -19,4 +19,4 @@
 <http://www.gnu.org/licenses/>.  */
 
 #define GNU_USER_LINK_EMULATION "elf_i386_fbsd"
-#define GLIBC_DYNAMIC_LINKER "/tools/lib/ld.so.1"
+#define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/i386/linux64.h gcc-5.3.0-zip/gcc/config/i386/linux64.h
--- gcc-5.3.0-original/gcc/config/i386/linux64.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/i386/linux64.h	2015-01-05 07:33:28.000000000 -0500
@@ -27,6 +27,6 @@
 #define GNU_USER_LINK_EMULATION64 "elf_x86_64"
 #define GNU_USER_LINK_EMULATIONX32 "elf32_x86_64"
 
-#define GLIBC_DYNAMIC_LINKER32 "/tools/lib/ld-linux.so.2"
-#define GLIBC_DYNAMIC_LINKER64 "/tools/lib64/ld-linux-x86-64.so.2"
-#define GLIBC_DYNAMIC_LINKERX32 "/tools/libx32/ld-linux-x32.so.2"
+#define GLIBC_DYNAMIC_LINKER32 "/lib/ld-linux.so.2"
+#define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux-x86-64.so.2"
+#define GLIBC_DYNAMIC_LINKERX32 "/libx32/ld-linux-x32.so.2"
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/i386/linux.h gcc-5.3.0-zip/gcc/config/i386/linux.h
--- gcc-5.3.0-original/gcc/config/i386/linux.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/i386/linux.h	2015-01-05 07:33:28.000000000 -0500
@@ -20,4 +20,4 @@
 <http://www.gnu.org/licenses/>.  */
 
 #define GNU_USER_LINK_EMULATION "elf_i386"
-#define GLIBC_DYNAMIC_LINKER "/tools/lib/ld-linux.so.2"
+#define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2"
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/ia64/linux.h gcc-5.3.0-zip/gcc/config/ia64/linux.h
--- gcc-5.3.0-original/gcc/config/ia64/linux.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/ia64/linux.h	2015-01-05 07:33:28.000000000 -0500
@@ -55,7 +55,7 @@
 /* Define this for shared library support because it isn't in the main
    linux.h file.  */
 
-#define GLIBC_DYNAMIC_LINKER "/tools/lib/ld-linux-ia64.so.2"
+#define GLIBC_DYNAMIC_LINKER "/lib/ld-linux-ia64.so.2"
 
 #undef LINK_SPEC
 #define LINK_SPEC "\
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/knetbsd-gnu.h gcc-5.3.0-zip/gcc/config/knetbsd-gnu.h
--- gcc-5.3.0-original/gcc/config/knetbsd-gnu.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/knetbsd-gnu.h	2015-01-05 07:33:28.000000000 -0500
@@ -32,4 +32,4 @@
 
 
 #undef GNU_USER_DYNAMIC_LINKER
-#define GNU_USER_DYNAMIC_LINKER "/tools/lib/ld.so.1"
+#define GNU_USER_DYNAMIC_LINKER "/lib/ld.so.1"
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/kopensolaris-gnu.h gcc-5.3.0-zip/gcc/config/kopensolaris-gnu.h
--- gcc-5.3.0-original/gcc/config/kopensolaris-gnu.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/kopensolaris-gnu.h	2015-01-05 07:33:28.000000000 -0500
@@ -31,5 +31,4 @@
   while (0)
 
 #undef GNU_USER_DYNAMIC_LINKER
-#define GNU_USER_DYNAMIC_LINKER "/tools/lib/ld.so.1"
-
+#define GNU_USER_DYNAMIC_LINKER "/lib/ld.so.1"
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/linux.h gcc-5.3.0-zip/gcc/config/linux.h
--- gcc-5.3.0-original/gcc/config/linux.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/linux.h	2015-01-05 07:33:28.000000000 -0500
@@ -73,10 +73,10 @@
    GLIBC_DYNAMIC_LINKER must be defined for each target using them, or
    GLIBC_DYNAMIC_LINKER32 and GLIBC_DYNAMIC_LINKER64 for targets
    supporting both 32-bit and 64-bit compilation.  */
-#define UCLIBC_DYNAMIC_LINKER "/tools/lib/ld-uClibc.so.0"
-#define UCLIBC_DYNAMIC_LINKER32 "/tools/lib/ld-uClibc.so.0"
-#define UCLIBC_DYNAMIC_LINKER64 "/tools/lib/ld64-uClibc.so.0"
-#define UCLIBC_DYNAMIC_LINKERX32 "/tools/lib/ldx32-uClibc.so.0"
+#define UCLIBC_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
+#define UCLIBC_DYNAMIC_LINKER32 "/lib/ld-uClibc.so.0"
+#define UCLIBC_DYNAMIC_LINKER64 "/lib/ld64-uClibc.so.0"
+#define UCLIBC_DYNAMIC_LINKERX32 "/lib/ldx32-uClibc.so.0"
 #define BIONIC_DYNAMIC_LINKER "/system/bin/linker"
 #define BIONIC_DYNAMIC_LINKER32 "/system/bin/linker"
 #define BIONIC_DYNAMIC_LINKER64 "/system/bin/linker64"
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/lm32/uclinux-elf.h gcc-5.3.0-zip/gcc/config/lm32/uclinux-elf.h
--- gcc-5.3.0-original/gcc/config/lm32/uclinux-elf.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/lm32/uclinux-elf.h	2015-01-05 07:33:28.000000000 -0500
@@ -67,7 +67,7 @@
    %{shared:-shared} \
    %{symbolic:-Bsymbolic} \
    %{rdynamic:-export-dynamic} \
-   -dynamic-linker /tools/lib/ld-linux.so.2"
+   -dynamic-linker /lib/ld-linux.so.2"
 
 #define TARGET_OS_CPP_BUILTINS() GNU_USER_TARGET_OS_CPP_BUILTINS()
 
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/m68k/linux.h gcc-5.3.0-zip/gcc/config/m68k/linux.h
--- gcc-5.3.0-original/gcc/config/m68k/linux.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/m68k/linux.h	2015-01-05 07:33:28.000000000 -0500
@@ -71,7 +71,7 @@
    When the -shared link option is used a final link is not being
    done.  */
 
-#define GLIBC_DYNAMIC_LINKER "/tools/lib/ld.so.1"
+#define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
 
 #undef LINK_SPEC
 #define LINK_SPEC "-m m68kelf %{shared} \
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/microblaze/linux.h gcc-5.3.0-zip/gcc/config/microblaze/linux.h
--- gcc-5.3.0-original/gcc/config/microblaze/linux.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/microblaze/linux.h	2015-05-28 10:08:19.000000000 -0400
@@ -28,7 +28,7 @@
 #undef TLS_NEEDS_GOT
 #define TLS_NEEDS_GOT 1
 
-#define DYNAMIC_LINKER "/tools/lib/ld.so.1"
+#define DYNAMIC_LINKER "/lib/ld.so.1"
 #undef  SUBTARGET_EXTRA_SPECS
 #define SUBTARGET_EXTRA_SPECS \
   { "dynamic_linker", DYNAMIC_LINKER }
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/mips/linux.h gcc-5.3.0-zip/gcc/config/mips/linux.h
--- gcc-5.3.0-original/gcc/config/mips/linux.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/mips/linux.h	2015-01-05 07:33:28.000000000 -0500
@@ -22,20 +22,20 @@
 #define GNU_USER_LINK_EMULATIONN32 "elf32%{EB:b}%{EL:l}tsmipn32"
 
 #define GLIBC_DYNAMIC_LINKER32 \
-  "%{mnan=2008:/tools/lib/ld-linux-mipsn8.so.1;:/tools/lib/ld.so.1}"
+  "%{mnan=2008:/lib/ld-linux-mipsn8.so.1;:/lib/ld.so.1}"
 #define GLIBC_DYNAMIC_LINKER64 \
-  "%{mnan=2008:/tools/lib64/ld-linux-mipsn8.so.1;:/tools/lib64/ld.so.1}"
+  "%{mnan=2008:/lib64/ld-linux-mipsn8.so.1;:/lib64/ld.so.1}"
 #define GLIBC_DYNAMIC_LINKERN32 \
-  "%{mnan=2008:/tools/lib32/ld-linux-mipsn8.so.1;:/tools/lib32/ld.so.1}"
+  "%{mnan=2008:/lib32/ld-linux-mipsn8.so.1;:/lib32/ld.so.1}"
 
 #undef UCLIBC_DYNAMIC_LINKER32
 #define UCLIBC_DYNAMIC_LINKER32 \
-  "%{mnan=2008:/tools/lib/ld-uClibc-mipsn8.so.0;:/tools/lib/ld-uClibc.so.0}"
+  "%{mnan=2008:/lib/ld-uClibc-mipsn8.so.0;:/lib/ld-uClibc.so.0}"
 #undef UCLIBC_DYNAMIC_LINKER64
 #define UCLIBC_DYNAMIC_LINKER64 \
-  "%{mnan=2008:/tools/lib/ld64-uClibc-mipsn8.so.0;:/tools/lib/ld64-uClibc.so.0}"
+  "%{mnan=2008:/lib/ld64-uClibc-mipsn8.so.0;:/lib/ld64-uClibc.so.0}"
 #define UCLIBC_DYNAMIC_LINKERN32 \
-  "%{mnan=2008:/tools/lib32/ld-uClibc-mipsn8.so.0;:/tools/lib32/ld-uClibc.so.0}"
+  "%{mnan=2008:/lib32/ld-uClibc-mipsn8.so.0;:/lib32/ld-uClibc.so.0}"
 
 #define BIONIC_DYNAMIC_LINKERN32 "/system/bin/linker32"
 #define GNU_USER_DYNAMIC_LINKERN32 \
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/mn10300/linux.h gcc-5.3.0-zip/gcc/config/mn10300/linux.h
--- gcc-5.3.0-original/gcc/config/mn10300/linux.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/mn10300/linux.h	2015-01-05 07:33:28.000000000 -0500
@@ -32,7 +32,7 @@
 #undef  ASM_SPEC
 #define ASM_SPEC ""
 
-#define GLIBC_DYNAMIC_LINKER "/tools/lib/ld.so.1"
+#define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
 
 #undef  LINK_SPEC
 #define LINK_SPEC "%{mrelax:--relax} %{shared:-shared} \
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/pa/pa-linux.h gcc-5.3.0-zip/gcc/config/pa/pa-linux.h
--- gcc-5.3.0-original/gcc/config/pa/pa-linux.h	2016-03-25 11:55:15.508451270 -0400
+++ gcc-5.3.0-zip/gcc/config/pa/pa-linux.h	2015-09-24 20:04:26.000000000 -0400
@@ -37,7 +37,7 @@
 /* Define this for shared library support because it isn't in the main
    linux.h file.  */
 
-#define GLIBC_DYNAMIC_LINKER "/tools/lib/ld.so.1"
+#define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
 
 #undef LINK_SPEC
 #define LINK_SPEC "\
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/rs6000/linux64.h gcc-5.3.0-zip/gcc/config/rs6000/linux64.h
--- gcc-5.3.0-original/gcc/config/rs6000/linux64.h	2016-03-25 11:55:15.512451248 -0400
+++ gcc-5.3.0-zip/gcc/config/rs6000/linux64.h	2015-03-09 19:18:57.000000000 -0400
@@ -357,14 +357,14 @@
 #undef	LINK_OS_DEFAULT_SPEC
 #define LINK_OS_DEFAULT_SPEC "%(link_os_linux)"
 
-#define GLIBC_DYNAMIC_LINKER32 "/tools/lib/ld.so.1"
+#define GLIBC_DYNAMIC_LINKER32 "/lib/ld.so.1"
 #ifdef LINUX64_DEFAULT_ABI_ELFv2
-#define GLIBC_DYNAMIC_LINKER64 "%{mabi=elfv1:/tools/lib64/ld64.so.1;:/tools/lib64/ld64.so.2}"
+#define GLIBC_DYNAMIC_LINKER64 "%{mabi=elfv1:/lib64/ld64.so.1;:/lib64/ld64.so.2}"
 #else
-#define GLIBC_DYNAMIC_LINKER64 "%{mabi=elfv2:/tools/lib64/ld64.so.2;:/tools/lib64/ld64.so.1}"
+#define GLIBC_DYNAMIC_LINKER64 "%{mabi=elfv2:/lib64/ld64.so.2;:/lib64/ld64.so.1}"
 #endif
-#define UCLIBC_DYNAMIC_LINKER32 "/tools/lib/ld-uClibc.so.0"
-#define UCLIBC_DYNAMIC_LINKER64 "/tools/lib/ld64-uClibc.so.0"
+#define UCLIBC_DYNAMIC_LINKER32 "/lib/ld-uClibc.so.0"
+#define UCLIBC_DYNAMIC_LINKER64 "/lib/ld64-uClibc.so.0"
 #if DEFAULT_LIBC == LIBC_UCLIBC
 #define CHOOSE_DYNAMIC_LINKER(G, U) "%{mglibc:" G ";:" U "}"
 #elif DEFAULT_LIBC == LIBC_GLIBC
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/rs6000/sysv4.h gcc-5.3.0-zip/gcc/config/rs6000/sysv4.h
--- gcc-5.3.0-original/gcc/config/rs6000/sysv4.h	2016-03-25 11:55:15.512451248 -0400
+++ gcc-5.3.0-zip/gcc/config/rs6000/sysv4.h	2015-09-24 09:46:45.000000000 -0400
@@ -757,8 +757,8 @@
 
 #define LINK_START_LINUX_SPEC ""
 
-#define GLIBC_DYNAMIC_LINKER "/tools/lib/ld.so.1"
-#define UCLIBC_DYNAMIC_LINKER "/tools/lib/ld-uClibc.so.0"
+#define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
+#define UCLIBC_DYNAMIC_LINKER "/lib/ld-uClibc.so.0"
 #if DEFAULT_LIBC == LIBC_UCLIBC
 #define CHOOSE_DYNAMIC_LINKER(G, U) "%{mglibc:" G ";:" U "}"
 #elif !defined (DEFAULT_LIBC) || DEFAULT_LIBC == LIBC_GLIBC
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/s390/linux.h gcc-5.3.0-zip/gcc/config/s390/linux.h
--- gcc-5.3.0-original/gcc/config/s390/linux.h	2016-03-25 11:55:15.512451248 -0400
+++ gcc-5.3.0-zip/gcc/config/s390/linux.h	2015-05-11 03:14:10.000000000 -0400
@@ -60,8 +60,8 @@
 #define MULTILIB_DEFAULTS { "m31" }
 #endif
 
-#define GLIBC_DYNAMIC_LINKER32 "/tools/lib/ld.so.1"
-#define GLIBC_DYNAMIC_LINKER64 "/tools/lib/ld64.so.1"
+#define GLIBC_DYNAMIC_LINKER32 "/lib/ld.so.1"
+#define GLIBC_DYNAMIC_LINKER64 "/lib/ld64.so.1"
 
 #undef  LINK_SPEC
 #define LINK_SPEC \
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/sh/linux.h gcc-5.3.0-zip/gcc/config/sh/linux.h
--- gcc-5.3.0-original/gcc/config/sh/linux.h	2016-03-25 11:55:15.512451248 -0400
+++ gcc-5.3.0-zip/gcc/config/sh/linux.h	2015-01-05 07:33:28.000000000 -0500
@@ -43,7 +43,7 @@
 
 #define TARGET_ASM_FILE_END file_end_indicate_exec_stack
 
-#define GLIBC_DYNAMIC_LINKER "/tools/lib/ld-linux.so.2"
+#define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2"
 
 #undef SUBTARGET_LINK_EMUL_SUFFIX
 #define SUBTARGET_LINK_EMUL_SUFFIX "_linux"
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/sparc/linux64.h gcc-5.3.0-zip/gcc/config/sparc/linux64.h
--- gcc-5.3.0-original/gcc/config/sparc/linux64.h	2016-03-25 11:55:15.512451248 -0400
+++ gcc-5.3.0-zip/gcc/config/sparc/linux64.h	2015-01-05 07:33:28.000000000 -0500
@@ -84,8 +84,8 @@
    When the -shared link option is used a final link is not being
    done.  */
 
-#define GLIBC_DYNAMIC_LINKER32 "/tools/lib/ld-linux.so.2"
-#define GLIBC_DYNAMIC_LINKER64 "/tools/lib64/ld-linux.so.2"
+#define GLIBC_DYNAMIC_LINKER32 "/lib/ld-linux.so.2"
+#define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux.so.2"
 
 #ifdef SPARC_BI_ARCH
 
@@ -193,7 +193,7 @@
 #else /* !SPARC_BI_ARCH */
 
 #undef LINK_SPEC
-#define LINK_SPEC "-m elf64_sparc -Y P,%R/tools/lib64 %{shared:-shared} \
+#define LINK_SPEC "-m elf64_sparc -Y P,%R/usr/lib64 %{shared:-shared} \
   %{!shared: \
     %{!static: \
       %{rdynamic:-export-dynamic} \
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/sparc/linux.h gcc-5.3.0-zip/gcc/config/sparc/linux.h
--- gcc-5.3.0-original/gcc/config/sparc/linux.h	2016-03-25 11:55:15.512451248 -0400
+++ gcc-5.3.0-zip/gcc/config/sparc/linux.h	2015-01-05 07:33:28.000000000 -0500
@@ -83,7 +83,7 @@
    When the -shared link option is used a final link is not being
    done.  */
 
-#define GLIBC_DYNAMIC_LINKER "/tools/lib/ld-linux.so.2"
+#define GLIBC_DYNAMIC_LINKER "/lib/ld-linux.so.2"
 
 #undef  LINK_SPEC
 #define LINK_SPEC "-m elf32_sparc %{shared:-shared} \
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/vax/linux.h gcc-5.3.0-zip/gcc/config/vax/linux.h
--- gcc-5.3.0-original/gcc/config/vax/linux.h	2016-03-25 11:55:15.512451248 -0400
+++ gcc-5.3.0-zip/gcc/config/vax/linux.h	2015-01-05 07:33:28.000000000 -0500
@@ -41,7 +41,7 @@
   %{!shared: \
     %{!static: \
       %{rdynamic:-export-dynamic} \
-      -dynamic-linker /tools/lib/ld.so.1} \
+      -dynamic-linker /lib/ld.so.1} \
     %{static:-static}}"
 
 #undef  WCHAR_TYPE
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/xtensa/linux.h gcc-5.3.0-zip/gcc/config/xtensa/linux.h
--- gcc-5.3.0-original/gcc/config/xtensa/linux.h	2016-03-25 11:55:15.512451248 -0400
+++ gcc-5.3.0-zip/gcc/config/xtensa/linux.h	2015-01-05 07:33:28.000000000 -0500
@@ -44,7 +44,7 @@
   %{mlongcalls:--longcalls} \
   %{mno-longcalls:--no-longcalls}"
 
-#define GLIBC_DYNAMIC_LINKER "/tools/lib/ld.so.1"
+#define GLIBC_DYNAMIC_LINKER "/lib/ld.so.1"
 
 #undef LINK_SPEC
 #define LINK_SPEC \
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/zip/netbsd.h gcc-5.3.0-zip/gcc/config/zip/netbsd.h
--- gcc-5.3.0-original/gcc/config/zip/netbsd.h	1969-12-31 19:00:00.000000000 -0500
+++ gcc-5.3.0-zip/gcc/config/zip/netbsd.h	2016-01-30 15:04:14.796899050 -0500
@@ -0,0 +1,82 @@
+////////////////////////////////////////////////////////////////////////////////
+//
+// Filename: 	netbsd.h
+//
+// Project:	Zip CPU backend for the GNU Compiler Collection
+//
+// Purpose:	
+//
+// Creator:	Dan Gisselquist, Ph.D.
+//		Gisselquist Technology, LLC
+//
+////////////////////////////////////////////////////////////////////////////////
+//
+// Copyright (C) 2016, Gisselquist Technology, LLC
+//
+// This program is free software (firmware): you can redistribute it and/or
+// modify it under the terms of  the GNU General Public License as published
+// by the Free Software Foundation, either version 3 of the License, or (at
+// your option) any later version.
+//
+// This program is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with this program.  (It's in the $(ROOT)/doc directory, run make with no
+// target there if the PDF file isn't present.)  If not, see
+// <http://www.gnu.org/licenses/> for a copy.
+//
+// License:	GPL, v3, as defined and found on www.gnu.org,
+//		http://www.gnu.org/licenses/gpl.html
+//
+//
+////////////////////////////////////////////////////////////////////////////////
+#ifndef	ZIP_NETBSD_H
+#define	ZIP_NETBSD_H
+
+/* Define default target values. */
+
+#undef	MACHINE_TYPE
+#define	MACHINE_TYPE	"NetBSD/Zip ELF"
+
+#undef	TARGET_OS_CPP_BUILTINS
+#define	TARGET_OS_CPP_BUILTINS()	\
+	do { NETBSD_OS_CPP_BUILTINS_ELF();		\
+	builtin_define("__ZIPCPU__");			\
+	builtin_assert("cpu=zip");			\
+	builtin_assert("machine=zip");			\
+	} while(0);
+
+#undef	CPP_SPEC
+#define	CPP_SPEC	NETBSD_CPP_SPEC
+
+#undef	STARTFILE_SPEC
+#define	STARTFILE_SPEC	NETBSD_STARTFILE_SPEC
+
+#undef	ENDFILE_SPEC
+#define	ENDFILE_SPEC	NETBSD_ENDFILE_SPEC
+
+#undef	LIB_SPEC
+#define	LIB_SPEC	NETBSD_LIB_SPEC
+
+#undef	TARGET_VERSION
+#define	TARGET_VERSION	fprintf(stderr, " (%s)", MACHINE_TYPE);
+
+/* Make gcc agree with <machine/ansi.h> */
+
+#undef	WCHAR_TYPE
+#define	WCHAR_TYPE	"int"
+
+#undef	WCHAR_TYPE_SIZE
+#define	WCHAR_TYPE_SIZE	32
+
+#undef	WINT_TYPE
+#define	WINT_TYPE	"int"
+
+/* Clean up after the generic Zip/ELF configuration. */
+#undef	MD_EXEC_PREFIX
+#undef	MD_STARTFILE_PREFIX
+
+#endif	/* ZIP_NETBSD_H */
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/zip/t-zip gcc-5.3.0-zip/gcc/config/zip/t-zip
--- gcc-5.3.0-original/gcc/config/zip/t-zip	1969-12-31 19:00:00.000000000 -0500
+++ gcc-5.3.0-zip/gcc/config/zip/t-zip	2016-02-04 19:00:59.939652587 -0500
@@ -0,0 +1,47 @@
+################################################################################
+##
+## Filename: 	t-zip
+##
+## Project:	Zip CPU backend for the GNU Compiler Collection
+##
+## Purpose:	
+##
+## Creator:	Dan Gisselquist, Ph.D.
+##		Gisselquist Technology, LLC
+##
+################################################################################
+##
+## Copyright (C) 2016, Gisselquist Technology, LLC
+##
+## This program is free software (firmware): you can redistribute it and/or
+## modify it under the terms of  the GNU General Public License as published
+## by the Free Software Foundation, either version 3 of the License, or (at
+## your option) any later version.
+##
+## This program is distributed in the hope that it will be useful, but WITHOUT
+## ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
+## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+## for more details.
+##
+## You should have received a copy of the GNU General Public License along
+## with this program.  (It's in the $(ROOT)/doc directory, run make with no
+## target there if the PDF file isn't present.)  If not, see
+## <http://www.gnu.org/licenses/> for a copy.
+##
+## License:	GPL, v3, as defined and found on www.gnu.org,
+##		http://www.gnu.org/licenses/gpl.html
+##
+##
+################################################################################
+
+FPBIT = fp-bit.c
+DPBIT = dp-bit.c
+
+# dp-bit.c: $(srcdir)/config/fp-bit.c
+	# cat $(srcdir)/config/fp-bit.c > dp-bit.c
+# 
+# fp-bit.c: $(srcdir)/config/fp-bit.c
+	# echo '#define FLOAT" > fp-bit.c
+	# cat $(srcdir)/config/fp-bit.c >> fp-bit.c
+
+
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/zip/zip.c gcc-5.3.0-zip/gcc/config/zip/zip.c
--- gcc-5.3.0-original/gcc/config/zip/zip.c	1969-12-31 19:00:00.000000000 -0500
+++ gcc-5.3.0-zip/gcc/config/zip/zip.c	2016-03-24 21:28:04.199373113 -0400
@@ -0,0 +1,2324 @@
+////////////////////////////////////////////////////////////////////////////////
+//
+// Filename: 	zip.c
+//
+// Project:	Zip CPU backend for the GNU Compiler Collection
+//
+// Purpose:	
+//
+// Creator:	Dan Gisselquist, Ph.D.
+//		Gisselquist Technology, LLC
+//
+////////////////////////////////////////////////////////////////////////////////
+//
+// Copyright (C) 2016, Gisselquist Technology, LLC
+//
+// This program is free software (firmware): you can redistribute it and/or
+// modify it under the terms of  the GNU General Public License as published
+// by the Free Software Foundation, either version 3 of the License, or (at
+// your option) any later version.
+//
+// This program is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with this program.  (It's in the $(ROOT)/doc directory, run make with no
+// target there if the PDF file isn't present.)  If not, see
+// <http://www.gnu.org/licenses/> for a copy.
+//
+// License:	GPL, v3, as defined and found on www.gnu.org,
+//		http://www.gnu.org/licenses/gpl.html
+//
+//
+////////////////////////////////////////////////////////////////////////////////
+#include "config.h"
+#include "system.h"
+#include "coretypes.h"
+#include "tm.h"
+#include "rtl.h"
+#include "dominance.h"
+#include "cfg.h"
+#include "cfgrtl.h"
+#include "cfganal.h"
+#include "lcm.h"
+#include "cfgbuild.h"
+#include "cfgcleanup.h"
+#include "predict.h"
+#include "basic-block.h"
+#include "df.h"
+#include "hashtab.h"
+#include "hash-set.h"
+#include "machmode.h"
+#include "symtab.h"
+#include "rtlhash.h"
+#include "tree.h"
+#include "regs.h"
+#include "hard-reg-set.h"
+#include "real.h"
+#include "insn-config.h"
+#include "conditions.h"
+#include "output.h"
+#include "insn-attr.h"
+#include "flags.h"
+#include "expr.h"
+#include "function.h"
+#include "recog.h"
+#include "toplev.h"
+#include "ggc.h"
+#include "builtins.h"
+#include "calls.h"
+#include "langhooks.h"
+#include "optabs.h"
+#include "explow.h"
+#include "emit-rtl.h"
+
+// #include "tmp_p.h"
+#include "target.h"
+#include "target-def.h"
+// #include "tm-constrs.h"
+// #include "tm-preds.h"
+
+#include "diagnostic.h"
+// #include "integrate.h"
+
+// static int	zip_arg_partial_bytes(CUMULATIVE_ARGS *, enum machine_mode, tree, bool);
+// static	bool	zip_pass_by_reference(CUMULATIVE_ARGS *, enum machine_mode, const_tree, bool);
+static	bool	zip_return_in_memory(const_tree, const_tree);
+static	bool	zip_frame_pointer_required(void);
+// static	bool	zip_must_pass_in_stack(enum machine_mode, const_tree);
+
+// static	void	zip_setup_incoming_varargs(CUMULATIVE_ARGS *, enum machine_mode, tree, int *, int);
+static void zip_function_arg_advance(cumulative_args_t ca, enum machine_mode mode,
+		const_tree type, bool named);
+static rtx zip_function_arg(cumulative_args_t ca, enum machine_mode mode, const_tree type, bool named);
+
+static	void	zip_asm_trampoline_template(FILE *);
+static	void	zip_trampoline_init(rtx, tree, rtx);
+static	void	zip_init_builtins(void);
+static	tree zip_builtin_decl(unsigned, bool);
+// static void	zip_asm_output_anchor(rtx x);
+	void 	zip_asm_output_def(FILE *s, const char *n, const char *v);
+	void	zip_update_cc_notice(rtx exp, rtx_insn *insn);
+static	rtx	zip_expand_builtin(tree exp, rtx target, rtx subtarget,
+			enum machine_mode tmode, int	ignore);
+static	bool	zip_scalar_mode_supported_p(enum machine_mode mode);
+static	bool	zip_libgcc_floating_mode_supported_p(enum machine_mode mode);
+static	int	zip_address_cost(rtx addr, enum machine_mode mode, addr_space_t as, bool spd);
+static	bool	zip_mode_dependent_address_p(const_rtx addr, addr_space_t);
+static	unsigned HOST_WIDE_INT	zip_const_anchor = 0x20000;
+static		 HOST_WIDE_INT	zip_min_opb_imm = -0x200000;
+static		 HOST_WIDE_INT	zip_max_opb_imm =  0x1fffff;
+static		 HOST_WIDE_INT	zip_min_anchor_offset = -0x20000;
+static		 HOST_WIDE_INT	zip_max_anchor_offset =  0x1ffff;
+static		 HOST_WIDE_INT	zip_min_mov_offset = -0x1000;
+static		 HOST_WIDE_INT	zip_max_mov_offset =  0x0fff;
+static	int	zip_sched_issue_rate(void) { return 1; }
+static	bool	zip_legitimate_address_p(machine_mode, rtx, bool);
+static	bool	zip_legitimate_move_operand_p(machine_mode, rtx, bool);
+	void	zip_debug_rtx_pfx(const char *, const_rtx x);
+	void	zip_debug_rtx(const_rtx x);
+static	void	zip_override_options(void);
+static	bool	zip_can_eliminate(int from ATTRIBUTE_UNUSED, int to);
+static	int	zip_memory_move_cost(machine_mode, reg_class_t, bool);
+static	rtx	zip_legitimize_address(rtx x, rtx oldx, machine_mode mode);
+
+
+#define	ALL_DEBUG_OFF	false
+#define	ALL_DEBUG_ON	false
+
+enum ZIP_BUILTIN_ID_CODE {
+	ZIP_BUILTIN_RTU,
+	ZIP_BUILTIN_HALT,
+	ZIP_BUILTIN_IDLE,
+	ZIP_BUILTIN_SYSCALL,
+	ZIP_BUILTIN_SAVE_CONTEXT,
+	ZIP_BUILTIN_RESTORE_CONTEXT,
+	ZIP_BUILTIN_BITREV,
+	ZIP_BUILTIN_CC,
+	ZIP_BUILTIN_MAX
+};
+
+static	GTY (()) tree	zip_builtins[(int)ZIP_BUILTIN_MAX];
+static	enum insn_code	zip_builtins_icode[(int)ZIP_BUILTIN_MAX];
+
+
+#include "gt-zip.h"
+
+/* The Global 'targetm' Variable. */
+struct	gcc_target	targetm = TARGET_INITIALIZER;
+
+
+enum	reg_class zip_reg_class(int);
+
+#define	LOSE_AND_RETURN(msgid, x)		\
+	do {					\
+		zip_operand_lossage(msgid, x);	\
+		return;				\
+	} while(0)
+
+/* Per-function machine data. */
+struct GTY(()) machine_function
+{
+	/* number of pretented arguments for varargs */
+	int	pretend_size;
+
+	/* Number of bytes saved on the stack for local variables. */
+	int	local_vars_size;
+
+	/* Number of bytes saved on stack for register save area */
+	int	saved_reg_size;
+	int	save_ret;
+
+	int	sp_fp_offset;
+	bool	fp_needed;
+	int	size_for_adjusting_sp;
+};
+
+/* Allocate a chunk of memory for per-function machine-dependent data. */
+
+static struct machine_function *
+zip_init_machine_status(void) {
+	return ggc_cleared_alloc<machine_function>();
+}
+
+static	void
+zip_override_options(void)
+{
+	init_machine_status = zip_init_machine_status;
+}
+
+enum	reg_class
+zip_reg_class(int regno)
+{
+	if (is_ZIP_GENERAL_REG(regno)) {
+		return GENERAL_REGS;
+	} else if (is_ZIP_REG(regno)) {
+		return ALL_REGS;
+	} return NO_REGS;
+}
+
+/* Worker function for TARGET_RETURN_IN_MEMORY. */
+static	bool
+zip_return_in_memory(const_tree type, const_tree fntype ATTRIBUTE_UNUSED) {
+	const	HOST_WIDE_INT size = int_size_in_bytes(type);
+	return (size == -1)||(size > UNITS_PER_WORD);
+}
+
+/* Emit an error emssage when we're in an asm, and a fatal error for "normal"
+ * insn.  Formatted output isn't easily implemented, since we use output operand
+ * lossage to output the actual message and handle the categorization of the
+ * error.  */
+
+static void
+zip_operand_lossage(const char *msgid, rtx op) {
+	fprintf(stderr, "Operand lossage??\n");
+	debug_rtx(op);
+	zip_debug_rtx(op);
+	output_operand_lossage("%s", msgid);
+}
+
+/* The PRINT_OPERAND_ADDRESS worker.   */
+void
+zip_print_operand_address(FILE *file, rtx x) {
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) zip_debug_rtx(x);
+	switch(GET_CODE(x)) {
+		case REG:
+			fprintf(file, "(%s)", reg_names[REGNO(x)]);
+			break;
+		case SYMBOL_REF:
+			fprintf(file, "%s", XSTR(x,0));
+			break;
+		case LABEL_REF:
+			x = LABEL_REF_LABEL(x);
+		case CODE_LABEL:
+			{ char buf[256];
+			ASM_GENERATE_INTERNAL_LABEL(buf, "L", CODE_LABEL_NUMBER(x));
+#ifdef	ASM_OUTPUT_LABEL_REF
+			ASM_OUTPUT_LABEL_REF(file, buf);
+#else
+			assemble_name(file, buf);
+#endif
+			}
+			break;
+		case PLUS:
+			if (!REG_P(XEXP(x, 0))) {
+				fprintf(stderr, "Unsupported address construct\n");
+				zip_debug_rtx(x);
+				abort();
+			} if (CONST_INT_P(XEXP(x, 1))) {
+				if (INTVAL(XEXP(x,1))!=0) {
+					fprintf(file, "%ld(%s)",
+					INTVAL(XEXP(x, 1)),
+					reg_names[REGNO(XEXP(x, 0))]);
+				} else {
+					fprintf(file, "(%s)",
+					reg_names[REGNO(XEXP(x, 0))]);
+				}
+			} else if (GET_CODE(XEXP(x,1)) == SYMBOL_REF) {
+				fprintf(file, "%s(%s)", XSTR(x,0),
+					reg_names[REGNO(XEXP(x, 0))]);
+			} else if ((GET_CODE(XEXP(x, 1)) == MINUS)
+				&& (GET_CODE(XEXP(XEXP(x, 1), 0))==SYMBOL_REF)
+				&& (GET_CODE(XEXP(XEXP(x, 1), 1))==SYMBOL_REF)) {
+				fprintf(file, "%s-%s(%s)",
+					XSTR(XEXP(XEXP(x, 1),0),0),
+					XSTR(XEXP(XEXP(x, 1),1),0),
+					reg_names[REGNO(XEXP(x, 0))]);
+			} else
+				fprintf(file, "#INVALID(%s)",
+					reg_names[REGNO(XEXP(x, 0))]);
+			/*
+			else if (GET_CODE(XEXP(addr, 1)) == LABEL)
+				fprintf(file, "%s(%s)",
+					GET_CODE(XEXP(addr, 1)),
+					reg_names[REGNO(GET_CODE(XEXP(addr, 0)))]);
+			else if ((GET_CODE(XEXP(addr, 1)) == MINUS)
+				&& (GET_CODE(XEXP(GET_CODE(XEXP(addr, 1)), 0))==LABEL)
+				&& (GET_CODE(XEXP(GET_CODE(XEXP(addr, 1)), 1))==LABEL)) {
+				fprintf(file, "%s-%s(%s)",
+					reg_names[REGNO(GET_CODE(XEXP(addr, 0)))]);
+					reg_names[REGNO(GET_CODE(XEXP(addr, 0)))]);
+					reg_names[REGNO(GET_CODE(XEXP(addr, 0)))]);
+			} 
+			*/
+			break;
+		// We don't support direct memory addressing within our
+		// instruction set, even though the instructions themselves
+		// would support direct memory addressing of the lower 18 bits
+		// of memory space.
+		case MEM:
+			if (dbg) zip_debug_rtx(x);
+			zip_print_operand_address(file, XEXP(x, 0));
+			break;
+		case CONST_INT:
+			fprintf(file, "%ld",INTVAL(x));
+			break;
+		default:
+			fprintf(stderr, "Unknown address format\n");
+			zip_debug_rtx(x);
+			abort(); break;
+			// output_addr_const(file, x);
+		break;
+	}
+}
+
+/* The PRINT_OPERAND worker. */
+
+void
+zip_print_operand(FILE *file, rtx x, int code)
+{
+	rtx operand = x;
+	int	rgoff = 0;
+
+	// fprintf(file, "Print Operand!\n");
+
+	/* New code entries should just be added to the switch below.  If
+	 * handling is finished, just return.  If handling was just a
+	 * modification of the operand, the modified operand should be put in
+	 * "operand", and then do a break to let default handling
+	 * (zero-modifier) output the operand.
+	 */
+	switch(code) {
+		case 0:
+			/* No code, print as usual. */
+			break;
+		case 'L':
+			/* Lower of two registers, print one up */
+			rgoff = 1;
+			break;
+		case 'R':
+		case 'H':
+			/* Higher of a register pair, print normal */
+			break;
+
+		default:
+			LOSE_AND_RETURN("invalid operand modifier letter", x);
+	}
+
+	/* Print an operand as without a modifier letter. */
+	switch (GET_CODE(operand)) {
+	case REG:
+		if (REGNO(operand)+rgoff >= FIRST_PSEUDO_REGISTER)
+			internal_error("internal error: bad register: %d", REGNO(operand));
+		fprintf(file, "%s", reg_names[REGNO(operand)+rgoff]);
+		return;
+	case SCRATCH:
+		LOSE_AND_RETURN("Need a scratch register", x);
+		return;
+
+	case CODE_LABEL:
+	case LABEL_REF:
+	case SYMBOL_REF:
+	case PLUS:
+		PRINT_OPERAND_ADDRESS(file, operand);
+		return;
+	case MEM:
+		PRINT_OPERAND_ADDRESS(file, XEXP(operand, 0));
+		return;
+
+	default:
+		/* No need to handle all strange variants, let
+		 * output_addr_const do it for us.
+	 	 */
+		if (CONSTANT_P(operand)) {
+			output_addr_const(file, operand);
+			return;
+		}
+
+		LOSE_AND_RETURN("unexpected operand", x);
+	}
+}
+
+static bool
+zip_frame_pointer_required(void)
+{
+	// This should really depend upon whether we have variable sized
+	// arguments in our frame or not.  Once this fails, let's look
+	// at what the problem was and then whether or not we can detect
+	// it.
+	//
+	// Use a GCC global to determine our answer
+	if (cfun->calls_alloca)
+		return true;
+	return (frame_pointer_needed);
+/*
+	fprintf(stderr, "ZIP_FRAME_POINTER_REQUIRED()\n");
+	if (frame_pointer_needed) {
+		fprintf(stderr, "FRAME_POINTER_NEEDED is true\n");
+		zip_debug_rtx(frame_pointer_rtx);
+		if (frame_pointer_rtx == NULL_RTX)
+			return true;
+		if (GET_CODE(frame_pointer_rtx)==PLUS) {
+			if ((REG_P(XEXP(frame_pointer_rtx,0)))
+				&&(REGNO(XEXP(frame_pointer_rtx, 0))==zip_SP)
+				&&(CONST_INT_P(XEXP(frame_pointer_rtx,1))))
+				return false;
+			if ((REG_P(XEXP(frame_pointer_rtx,1)))
+				&&(REGNO(XEXP(frame_pointer_rtx, 1))==zip_SP)
+				&&(CONST_INT_P(XEXP(frame_pointer_rtx,0))))
+				return false;
+			return true;
+		} else if ((REG_P(frame_pointer_rtx))
+				&&(REGNO(frame_pointer_rtx) == zip_SP))
+			return false;
+		return true;
+	} else return false;
+*/
+}
+
+/* Determine whether or not a register needs to be saved on the stack or not.
+ */
+static bool
+zip_save_reg(int regno) {
+	if (regno == 0)
+		return ((!crtl->is_leaf)
+			||((df_regs_ever_live_p(0))&&(!call_used_regs[0])));
+	else if ((regno == zip_GOT)&&(!ZIP_PIC))
+		return	((df_regs_ever_live_p(regno))
+				&&(!call_used_regs[regno]));
+	else if (regno == zip_FP)
+		return((zip_frame_pointer_required())||((df_regs_ever_live_p(regno))
+				&&(!call_used_regs[regno])));
+	else if (regno < zip_FP)
+		return	((df_regs_ever_live_p(regno))
+				&&(!call_used_regs[regno]));
+	return false;
+}
+
+/* Compute the size of the local area and the size to be adjusted by the
+ * prologue and epilogue.
+ *
+ * Here's what we are looking at (top is the current, bottom is the last ...)
+ *
+ *	Stack Pointer ->
+ *			Local variables (could be variable size)
+ *	Frame Pointer ->	(= Stack Pointer + sp_fp_offset)
+ *			Saved return address, if saved
+ *			Other Saved registers
+ *			Saved frame pointer (if used)
+ *			Saved R12, if used
+ *			(Stack pointer is not saved)
+ *	Original stack pointer ->	(= Stack_Pointer +size_for_adjusting_sp)
+ *			Called arguments (not passed in registers)
+ *			Return arguments (not R1, args.pretend_args_size)
+ *		(Prior function's stack frame ... )
+ *
+ */
+static void
+zip_compute_frame(void) {
+	int	regno;
+	int	args_size;
+
+	// gcc_assert(crtl);
+	gcc_assert(cfun);
+	gcc_assert(cfun->machine);
+
+	args_size=(ACCUMULATE_OUTGOING_ARGS ? crtl->outgoing_args_size : 0);
+
+	if(crtl->args.pretend_args_size > 0) {
+		args_size += crtl->args.pretend_args_size;
+		// printf("%s pretend_args_size : %d\n", current_function_name(),
+			// crtl->args.pretend_args_size);
+		cfun->machine->pretend_size = crtl->args.pretend_args_size;
+	}
+
+	cfun->machine->local_vars_size = get_frame_size();
+
+	// Save callee-saved registers. 
+	cfun->machine->saved_reg_size = 0;
+	for(regno=0; regno < FIRST_PSEUDO_REGISTER; regno++) {
+		if (zip_save_reg(regno))
+			cfun->machine->saved_reg_size ++;
+	}
+
+	cfun->machine->fp_needed = (zip_frame_pointer_required());
+
+	if ((cfun->machine->fp_needed)&&
+			(!df_regs_ever_live_p(zip_FP))) {
+		cfun->machine->saved_reg_size ++;
+	}
+
+	cfun->machine->sp_fp_offset = args_size + cfun->machine->local_vars_size;
+	cfun->machine->size_for_adjusting_sp = cfun->machine->local_vars_size
+			+ cfun->machine->saved_reg_size
+			+ args_size;
+
+	/*
+	if (cfun->machine->fp_needed)
+		frame_pointer_rtx = gen_rtx_REG(Pmode, zip_FP);
+	else
+		frame_pointer_rtx = plus_constant(Pmode, gen_rtx_REG(Pmode, zip_SP),
+			cfun->machine->sp_fp_offset);
+	*/
+}
+
+void
+zip_expand_prologue(void) {
+	rtx	insn;
+
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+	zip_compute_frame();
+
+	if (dbg)  fprintf(stderr, "Computing Prologue instructions\n");
+	if (cfun->machine->size_for_adjusting_sp != 0) {
+		insn = emit_insn(gen_subsi3(stack_pointer_rtx,
+				stack_pointer_rtx,
+			gen_int_mode(cfun->machine->size_for_adjusting_sp,
+				SImode)));
+			// cfun->machine->sp_fp_offset
+
+		RTX_FRAME_RELATED_P(insn) = 1;
+	}
+
+	{
+		int offset = 0, regno;
+		for(regno=0; regno < FIRST_PSEUDO_REGISTER; regno++) {
+			if (zip_save_reg(regno)) {
+				insn=emit_insn(gen_movsi_sto(
+					gen_rtx_MEM(SImode, plus_constant(
+						Pmode, stack_pointer_rtx,
+						cfun->machine->sp_fp_offset
+						+offset++, true)),
+					gen_rtx_REG(SImode, regno)));
+				RTX_FRAME_RELATED_P(insn) = 1;
+			}
+		}
+		if (dbg)  fprintf(stderr, "%d registers saved%s\n", offset,
+			(crtl->saves_all_registers)?", should be all of them":", less than all");
+	}
+
+	if (cfun->machine->fp_needed) {
+		if (dbg) zip_debug_rtx(stack_pointer_rtx);
+		if (dbg) zip_debug_rtx(frame_pointer_rtx);
+		insn = emit_insn(gen_movsi_reg_off(frame_pointer_rtx,
+				stack_pointer_rtx, gen_int_mode(
+						cfun->machine->sp_fp_offset,
+						SImode)));
+		RTX_FRAME_RELATED_P(insn) = 1;
+		if (dbg)  fprintf(stderr, "sp_fp_offset is %d\n", cfun->machine->sp_fp_offset);
+	}
+}
+
+bool
+zip_use_return_insn(void)
+{
+	if ((!reload_completed)||(cfun->machine->fp_needed)
+			||(get_frame_size()!=0)) {
+		// If R0 ever gets pushed to the stack, then we cannot 
+		// use a master return from anywhere.  We need to clean up the
+		// stack first.
+		if ((!crtl->is_leaf)||((df_regs_ever_live_p(0))
+						&&(!call_used_regs[0]))) {
+			return false;
+		}
+	}
+	zip_compute_frame();
+	return (cfun->machine->size_for_adjusting_sp == 0);
+}
+
+/* As per the notes in M68k.c, quote the function epilogue should not depend
+ * upon the current stack pointer.  It should use the frame poitner only,
+ * if there is a frame pointer.  This is mandatory because of alloca; we also
+ * take advantage of it to omit stack adjustments before returning ...
+ *
+ * Let's see if we can use their approach here.
+ *
+ * We can't.  Consider our choices:
+ *	LOD (FP),R0
+ *	LOD 1(FP),R4
+ *	LOD 2(FP),R5
+ *	LOD 3(FP),R6
+ *	LOD 4(FP),FP
+ *	... Then what is the stack pointer?
+ * or 
+ *	LOD (FP),R0
+ *	LOD 1(FP),R4
+ *	LOD 2(FP),R5
+ *	LOD 3(FP),R6
+ *	MOV FP,SP
+ *	LOD 4(SP),FP
+ *	... Which suffers unnecessary pipeline stalls, and certainly doesn't
+ *	exploit our pipeline memory function
+ * or
+ *	MOV FP,SP
+ *	LOD (SP),R0
+ *	LOD 1(SP),R4
+ *	LOD 2(SP),R5
+ *	LOD 3(SP),R6
+ *	LOD 4(SP),FP
+ * Which will be our choice.  Note that we do use the stack pointer, eventually.
+ *
+ */
+void
+zip_expand_epilogue(void) {
+	int	regno, offset;
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	zip_compute_frame();
+
+	if (dbg) fprintf(stderr, "EPILOG::\n");
+	if (cfun->machine->fp_needed) {
+		if (dbg) fprintf(stderr, "EPILOG::Moving frame pointer to stack register\n");
+		emit_insn(gen_movsi_reg(stack_pointer_rtx, frame_pointer_rtx));
+	}
+
+	if (cfun->machine->saved_reg_size != 0) {
+		offset =  (cfun->machine->size_for_adjusting_sp -
+				cfun->machine->sp_fp_offset
+			- cfun->machine->saved_reg_size);
+		if (dbg) fprintf(stderr, "EPILOG::Saved_REG_Size = %d\n", cfun->machine->saved_reg_size);
+		for(regno=0; regno < FIRST_PSEUDO_REGISTER; regno++) {
+			if (zip_save_reg(regno)) {
+				if (dbg) fprintf(stderr, "EPILOG::RESTORING R%d\n", regno);
+				emit_insn(gen_movsi_lod(
+						gen_rtx_REG(SImode, regno),
+					gen_rtx_MEM(SImode, plus_constant( SImode,
+						stack_pointer_rtx, offset++, true))));
+			}
+		}
+	}
+
+	if (cfun->machine->size_for_adjusting_sp != 0) {
+		if (dbg) fprintf(stderr, "EPILOG::ADDSI3(StackPtr, %d)\n",
+				cfun->machine->size_for_adjusting_sp);
+		emit_insn(gen_addsi3(stack_pointer_rtx, stack_pointer_rtx,
+			gen_int_mode(
+				cfun->machine->size_for_adjusting_sp
+				-cfun->machine->sp_fp_offset, SImode)));
+	}
+	if (dbg) fprintf(stderr, "EPILOG::EMITTING-RETURN\n");
+
+	emit_jump_insn(ret_rtx);
+}
+
+/* Implement RETURN_ADDR_RTX(COUNT, FRAMEADDR).
+ *
+ * We currently only support calculating the return address for the current
+ * frame.
+ */
+
+/*
+rtx
+zip_return_addr_rtx(int count, rtx frame ATTRIBUTE_UNUSED)
+{
+	if (count)
+		return NULL_RTX;
+
+	zip_compute_frame();
+
+	// saved return address for current function is at fp - 1
+	if (cfun->machine->save_ret)
+		return gen_rtx_MEM(Pmode, plus_constant(frame_pointer_rtx,
+				-UNITS_PER_WORD));
+	return get_hard_reg_initial_val(Pmode, RETURN_ADDRESS_REGNUM);
+}
+*/
+
+/* Implements the macro INITIAL_ELIMINATION_OFFSET,
+ * return the OFFSET.
+ */
+/*
+int
+zip_initial_elimination_offset(int from, int to) {
+	int	ret = 0;
+	zip_compute_frame();
+
+	if (((from) == FRAME_POINTER_REGNUM)&&((to) == STACK_POINTER_REGNUM)) {
+		ret = cfun->machine->sp_fp_offset;
+	} else if (((from)=ARG_POINTER_REGNUM)&&((to)==FRAME_POINTER_REGNUM)) {
+		ret = cfun->machine->local_vars_size;
+	} else {
+		abort();
+	}
+
+	return ret;
+}
+*/
+
+/* Return non-zero if the function argument described by TYPE is to be passed
+ * by reference.
+ */
+/*
+static bool
+zip_pass_by_reference(CUMULATIVE_ARGS *cum ATTRIBUTE_UNUSED,
+		enum machine_mode mode, const_tree type,
+		bool name ATTRIBUTE_UNUSED) {
+	unsigned	HOST_WIDE_INT	size;
+
+	if (type) {
+		if (AGGREGATE_TYPE_P(type)) {
+			return TRUE;
+		} size = int_size_in_bytes(type);
+	} else
+		size = GET_MODE_SIZE(mode);
+
+	return (size > GET_MODE_SIZE(SImode)); // > 1 word : is this okay?
+	// The idea is to pass everything larger than an int by reference (or
+	// on the stack)
+}
+*/
+
+/*
+ * Code taken from m68k ...
+ */
+static bool
+zip_can_eliminate(int from, int to)
+{
+	// fprintf(stderr, "CAN_ELIMINATE::QUERYING(%d,%d)\n", from, to);
+	if ((from == zip_FP)&&(to == zip_SP))
+		return !cfun->machine->fp_needed;
+	return true;
+}
+
+/*
+static	bool
+zip_must_pass_in_stack(enum machine_mode mode, const_tree type)
+{
+	if (mode == BLKmode) {
+		return true;
+	} if (type == NULL) {
+		return false;
+	} return AGGREGATE_TYPE_P(type);
+}
+*/
+
+/*
+static void
+zip_basic_check(void)
+{
+	gcc_assert(mode_base_align[SImode]==4);
+	if ((BITS_PER_UNIT != 32)
+			||(GET_MODE_SIZE(SImode)!=1)
+			||(GET_MODE_SIZE(DImode)!=1)
+			||(HARD_REGNO_NREGS(0,SImode)!=1)) {
+		printf("SIZEOF(SIMode) == %d\n", GET_MODE_SIZE(SImode));
+		printf("BITS_PER_UNIT  == %d\n", BITS_PER_UNIT);
+		gcc_assert(BITS_PER_UNIT==32);
+		gcc_assert(GET_MODE_SIZE(SImode)==1);
+		gcc_assert(HARD_REGNO_NREGS(0,SImode)==1);
+	}
+}
+*/
+
+#define	zip_basic_check()
+
+/* Compute the number of word sized regiters needed to hold a function 
+ * argument of mode INT_MODE and tree type TYPE.
+ */
+int
+zip_num_arg_regs(enum machine_mode mode, const_tree type) {
+	int	size;
+
+	zip_basic_check();
+
+	if (targetm.calls.must_pass_in_stack(mode, type))
+		return 0;
+
+	if ((type)&&(mode == BLKmode))
+		size = int_size_in_bytes(type);
+	else
+		size = GET_MODE_SIZE(mode);
+
+	return (size + UNITS_PER_WORD - 1)/UNITS_PER_WORD;
+}
+
+/* pushed in function prologue */
+/*
+static void
+zip_setup_incoming_varargs(CUMULATIVE_ARGS *cum, enum machine_mode mode,
+		tree type, int *pretend_size, int no_rtl) {
+	if (no_rtl)
+		return;
+
+	gcc_assert(mode != BLKmode);
+
+	if (*cum < (ZIP_LAST_ARG_REGNO+1)) {
+		int size = ZIP_FIRST_ARG_REGNO + ZIP_NUM_ARGS_REGS - *cum;
+		rtx	regblock;
+		int	offset = (*cum - ZIP_FIRST_ARG_REGNO) * UNITS_PER_WORD;
+		regblock = gen_rtx_MEM(BLKmode, 
+			plus_constant(arg_pointer_rtx, offset));
+		move_block_from_reg(*cum, regblock, size);
+		*pretend_size = size * UNITS_PER_WORD;
+	}
+
+	if (targetm.calls.strict_argument_naming(cum))
+		*cum = *cum + zip_num_arg_regs(mode, type);
+}
+*/
+
+/*
+static	int
+zip_arg_partial_bytes(CUMULATIVE_ARGS *cum, enum machine_mode mode,
+		tree type, bool name ATTRIBUTE_UNUSED) {
+	int	words;
+	unsigned int	regs = zip_num_arg_regs(mode, type);
+
+	if (*cum >= ZIP_LAST_ARG_REGNO + 1)
+		words = 0;
+	else if ((*cum + regs) > ZIP_LAST_ARG_REGNO + 1)
+		words = (*cum + regs) - ZIP_LAST_ARG_REGNO + 1;
+	else
+		words = 0;
+
+	return words * UNITS_PER_WORD;
+}
+*/
+
+static void
+zip_function_arg_advance(cumulative_args_t ca, machine_mode mode,
+		const_tree type, bool named ATTRIBUTE_UNUSED) {
+	CUMULATIVE_ARGS *cum;
+	int	nreg;
+
+	zip_basic_check();
+
+	cum = get_cumulative_args(ca);
+	nreg = zip_num_arg_regs(mode, type);
+	if (((*cum)+nreg) > NUM_ARG_REGS)
+		(*cum) = NUM_ARG_REGS;
+	else
+		(*cum) += nreg;
+}
+
+static rtx
+zip_function_arg(cumulative_args_t ca, machine_mode mode,
+		const_tree type ATTRIBUTE_UNUSED, bool named) {
+	CUMULATIVE_ARGS *cum;
+
+	zip_basic_check();
+
+
+	if (!named)
+		return NULL_RTX;
+	//if (targetm.calls.must_pass_in_stack(mode, type))
+		//return NULL_RTX;
+	cum = get_cumulative_args(ca);
+
+	if ((*cum) >= NUM_ARG_REGS)
+		return NULL_RTX;
+	return
+		gen_rtx_REG(mode, (*cum)+1);
+}
+
+/* NOTICE_UPDATE_CC sends us here
+ */
+void
+zip_update_cc_notice(rtx exp, rtx_insn *insn)
+{
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+	enum	attr_ccresult  ccr;
+	enum	attr_conditional  conditionally_executed;
+
+	// The default is that nothing has changed.
+	// cc_status = cc_status_prev;
+	rtx	src, dest;
+
+	if (dbg) fprintf(stderr, "CC-NOTICE ...\n");
+	if (dbg) zip_debug_rtx_pfx("CC :", exp);
+	if (dbg) debug_rtx(exp);
+
+	ccr = get_attr_ccresult(insn);
+	if (ccr == CCRESULT_UNKNOWN) {
+		CC_STATUS_INIT;
+		if (dbg) fprintf(stderr, "\tINIT-CC\n");
+		return;
+	}
+
+	if ((GET_CODE(exp) == PARALLEL)&&(GET_CODE(XVECEXP(exp, 0, 0))==SET)) {
+		// This works up and until we add cc0 parallel instructions
+		// to our instruction set.
+		dest = SET_DEST(XVECEXP(exp, 0, 0));
+		src  = SET_SRC (XVECEXP(exp, 0, 0));
+	} else if (GET_CODE(exp) == SET) {
+		dest = SET_DEST(exp);
+		src  = SET_SRC (exp);
+	} else {
+		// First, do nothing if we haven't touched the condition codes.
+		// Condition codes can only be changed as a result of a set
+		// expression ...?
+		if (dbg) fprintf(stderr, "Non-set expression, doesn\'t touch condition codes\n");
+		return;
+	}
+
+
+	if (ccr == CCRESULT_UNCHANGED) {
+		if (dbg) fprintf(stderr, "\tUnchanged CC\n");
+
+		// We can't just run away here ... even though the CC result
+		// hasn't changed, GCC's ability to recognize it as a valid
+		// result has changed.  In other words, if we just 'set' a
+		// value contained within either value1 or value2, then we'll
+		// need to update those values so that they are no longer looked
+		// upon as potentially containing the current CC values.
+
+		if (dest) {
+			if (dest == cc0_rtx)
+				CC_STATUS_INIT;
+			else if ((REG_P(dest))&&(dest != pc_rtx)) {
+				// An example here might be a load instruction
+				if (reg_mentioned_p(dest, cc_status.value1))
+					cc_status.value1 = NULL_RTX;
+				if (reg_mentioned_p(dest, cc_status.value2))
+					cc_status.value2 = NULL_RTX;
+			}
+		}
+		return;
+	}
+
+	// Gotta wait on this test, until we know whether or not the 
+	// conditionally executed instruction was designed to set the 
+	// CC0 register.
+	conditionally_executed = get_attr_conditional(insn);
+	if ((conditionally_executed == CONDITIONAL_YES)&&(dest != cc0_rtx)) {
+		// cc_status is unchanged
+		// However, GCC's vision of it may have changed
+		//
+		// Initialize CC_STATUS
+		if (dbg) fprintf(stderr, "\tCC -- unchanged (conditional exec)\n");
+		CC_STATUS_INIT;
+		return;
+	} else if (GET_CODE(src)==IF_THEN_ELSE) {
+		// Same thing as above
+		CC_STATUS_INIT;
+		return;
+	}
+
+	if (ccr == CCRESULT_VALIDZN)
+		cc_status.flags = CC_NO_OVERFLOW;
+	else
+		cc_status.flags = 0;
+	cc_status.value1 = dest;
+	if (dest == cc0_rtx)
+		cc_status.value2 = src;
+	else if((REG_P(dest))&&(!reg_mentioned_p(dest, src)))
+		cc_status.value2 = src;
+	else if((SUBREG_P(dest))&&(!reg_mentioned_p(XEXP(dest,0), src)))
+		cc_status.value2 = src;
+	else
+		cc_status.value2 = 0;
+	if (dbg) fprintf(stderr, "\tCC -- Set flags for\n");
+	if (dbg) zip_debug_rtx_pfx("V1: ", dest);
+	if ((dbg)&&(cc_status.value2)) zip_debug_rtx_pfx("V2: ", src);
+	else if (dbg)	fprintf(stderr, "V2: (No SRC)\n");
+	if ((dbg)&&(REG_P(dest))) fprintf(stderr, "src refers to dest ?? %s\n",
+		refers_to_regno_p(REGNO(dest),REGNO(dest),src,NULL)?"Yes":"No");
+	if ((dbg)&&(REG_P(dest))) fprintf(stderr, "Occurrs %d times\n",
+		count_occurrences(dest,src,0));
+	if ((dbg)&&(REG_P(dest))) fprintf(stderr, "%s mentioned\n",
+		reg_mentioned_p(dest,src)?"Is":"Is not");
+	if ((dbg)&&(REG_P(dest))) fprintf(stderr, "%s referenced\n",
+		reg_referenced_p(dest,src)?"Is":"Is not");
+
+//
+// These results are only used in final.c, where they are used to remove
+// compare instructions if the optimizer is on.  If I produce nothing, no
+// compare instructions will be removed.  If I produce something, a smart 
+// decision may be made to remove compare instructions.
+//
+// cc_status will be compared  with subsequent
+//	(set (cc0) (something)) (i.e. compare only) instructions
+//
+//	(set (cc0) (compare (x) (y)))
+//	dst = cc0 -- the destination of the set is ignored, save that it must be
+//		cc0
+//	src1 = (compare (x) (y))
+//	if (src1 == compare)&&(y == (const_int 0))
+//		src2 = (x)
+//	else
+//		src2 = null
+//
+//	Four conditions:
+//	1. if (val1)&&(src1 == val1)
+//		This would be true if I had seen a (set (val1) (src1)) insn
+//		If I have seen a (set (val1) (src1))
+//			or equivalently a (set (val1) (compare (x) (y)))
+//	or
+//	2. if (val2)&&(src1 == val2)
+//		This would be true if I had seen a (set (val1) (src1)) insn,
+//		and only if val2 was still valid.
+//	or
+//	3. if (src2)&&(value1)&&(src2 == value1)
+//		This would be true if we are comparing against zero, and the
+//		number we are comparing against zero is value 1
+//	or
+//	4. if (src2)&&(value2)&&(src2 == value2)
+//		... or value2.  This is the common ZipCPU case.
+//
+//		then delete the compare.
+//
+}
+
+
+/* totally buggy - we can't return pointers to nested functions */
+static void
+zip_asm_trampoline_template(FILE *f) {
+	// Whereas at one time I thought I wouldn't need it, now I know I
+	// need this trampoline function, although it is for a completely
+	// different purpose than the one I was familiar with.
+	fprintf(f, "\tldihi 0,r1\n");
+	fprintf(f, "\tldilo 0,r1\n");
+	fprintf(f, "\tjmp r1\n");
+}
+
+/* Worker function for TARGET_TRAMPOLINE_INIT. */
+static void
+zip_trampoline_init(rtx m_tramp ATTRIBUTE_UNUSED,
+	tree fndecl ATTRIBUTE_UNUSED,
+	rtx chain_value ATTRIBUTE_UNUSED) {
+// #warning "This needs to be filled out"
+	abort();
+}
+
+static tree
+def_builtin(const char *name, enum insn_code icode, enum ZIP_BUILTIN_ID_CODE code,
+	tree type)
+{
+	tree t = add_builtin_function(name,type,code,BUILT_IN_MD, NULL, NULL_TREE);
+	zip_basic_check();
+
+	if(t) {
+		zip_builtins[code] = t;
+		zip_builtins_icode[code] = icode;
+	}
+
+	return t;
+
+}
+
+void	zip_init_builtins(void) {
+	zip_basic_check();
+
+  tree void_ftype_void = build_function_type_list(void_type_node, NULL_TREE);
+#ifdef	HAVE_zip_rtu
+  def_builtin("zip_rtu", CODE_FOR_zip_rtu, ZIP_BUILTIN_RTU, void_ftype_void);
+#endif
+#ifdef	HAVE_zip_halt
+  def_builtin("zip_halt",  CODE_FOR_zip_halt,  ZIP_BUILTIN_HALT, void_ftype_void);
+#endif
+#ifdef	HAVE_zip_idle
+  def_builtin("zip_idle", CODE_FOR_zip_idle, ZIP_BUILTIN_IDLE, void_ftype_void);
+#endif
+
+#ifdef	HAVE_zip_syscall
+// Support int SYSCALL(callID, int a, int b, int c);
+  def_builtin("zip_syscall", CODE_FOR_zip_syscall, ZIP_BUILTIN_SYSCALL,
+  			build_function_type_list(void_type_node, NULL_TREE));
+#endif
+
+#ifdef	HAVE_zip_save_context
+  def_builtin("zip_save_context", CODE_FOR_zip_save_context, ZIP_BUILTIN_SAVE_CONTEXT, 
+  		build_function_type_list(void_type_node, ptr_type_node, 0));
+#endif
+
+#ifdef	HAVE_zip_restore_context
+  def_builtin("zip_restore_context", CODE_FOR_zip_restore_context, ZIP_BUILTIN_RESTORE_CONTEXT,
+  	build_function_type_list(void_type_node, ptr_type_node, 0));
+#endif
+
+#ifdef	HAVE_zip_bitrev
+  def_builtin("zip_bitrev", CODE_FOR_zip_bitrev, ZIP_BUILTIN_BITREV,
+  	build_function_type_list(unsigned_type_node, unsigned_type_node,
+		NULL_TREE));
+#endif
+
+#ifdef	HAVE_zip_cc
+  def_builtin("zip_cc", CODE_FOR_zip_cc, ZIP_BUILTIN_CC,
+  	build_function_type_list(unsigned_type_node, NULL_TREE));
+#endif
+
+}
+
+static tree
+zip_builtin_decl(unsigned zip_builtin_code, bool initialize_p ATTRIBUTE_UNUSED)
+{
+  if (zip_builtin_code >= ZIP_BUILTIN_MAX)
+    return error_mark_node;
+
+  return zip_builtins[zip_builtin_code];
+}
+
+static rtx
+zip_expand_builtin(tree exp, rtx target,
+		rtx subtarget ATTRIBUTE_UNUSED,
+		machine_mode tmode ATTRIBUTE_UNUSED,
+		int	ignore ATTRIBUTE_UNUSED) {
+
+	tree	fndecl = TREE_OPERAND(CALL_EXPR_FN(exp), 0);
+	bool	nonvoid = (TREE_TYPE(TREE_TYPE(fndecl)) != void_type_node);
+	enum	ZIP_BUILTIN_ID_CODE code=(enum ZIP_BUILTIN_ID_CODE)DECL_FUNCTION_CODE(fndecl);
+	enum	insn_code icode = zip_builtins_icode[code];
+	rtx	pat, op[5];
+	call_expr_arg_iterator	iter;
+	tree	arg;
+
+	if ((code == ZIP_BUILTIN_SAVE_CONTEXT)
+			||(code == ZIP_BUILTIN_RESTORE_CONTEXT)) {
+		arg = first_call_expr_arg(exp, &iter);
+		if (arg == error_mark_node)
+			return NULL_RTX;
+		op[0] = expand_normal(arg);
+		if (GET_CODE(op[0]) != REG)
+			op[0] = force_reg(Pmode, op[0]);
+		pat = GEN_FCN(icode)(op[0]);
+	} else if (code == ZIP_BUILTIN_BITREV) {
+		arg = first_call_expr_arg(exp, &iter);
+		if (arg == error_mark_node) {
+			return NULL_RTX;
+		}
+		op[0] = expand_normal(arg);
+		if (!target)
+			target = gen_reg_rtx(SImode);
+		pat = GEN_FCN(icode)(target, op[0]);
+	} else if (code == ZIP_BUILTIN_CC) {
+		if (!target)
+			target = gen_reg_rtx(SImode);
+		pat = GEN_FCN(icode)(target);
+	} else // RTU, HALT, IDLE
+		pat = GEN_FCN(icode)();
+	if (!pat)
+		return NULL_RTX;
+	emit_insn(pat);
+	return (nonvoid ? target : const0_rtx);
+}
+
+static	bool
+zip_scalar_mode_supported_p(enum machine_mode mode) {
+	zip_basic_check();
+
+	return ((mode)==SImode)||((mode)==DImode); // ||((mode)==SFmode);
+}
+
+static	bool
+zip_libgcc_floating_mode_supported_p(enum machine_mode mode) {
+	return ((mode)==SFmode)||((mode)==DFmode);
+}
+
+static	int
+zip_address_cost(rtx addr ATTRIBUTE_UNUSED,
+	enum machine_mode mode ATTRIBUTE_UNUSED,
+	addr_space_t as ATTRIBUTE_UNUSED, bool spd ATTRIBUTE_UNUSED) {
+	return 1;
+}
+
+static	bool
+zip_mode_dependent_address_p(const_rtx addr ATTRIBUTE_UNUSED,
+	addr_space_t as ATTRIBUTE_UNUSED) {
+	return false;
+}
+
+/*
+static	void
+zip_asm_output_anchor(rtx x) {
+	printf("ANCHOR: OP(%d)\n", GET_CODE(x));
+}
+*/
+
+static void
+zip_debug_print(const char *pfx, int lvl, const char *str) {
+	int	i;
+	i = lvl;
+	if ((true)||(lvl == 0))
+		fprintf(stderr, "%s", pfx);
+	else
+		i += strlen(pfx);
+	while(i-->0)
+		fprintf(stderr, "  ");
+	fprintf(stderr, "%s\n", str);
+}
+
+static void
+zip_debug_print_m(const char *pfx, int lvl, const char *str, enum machine_mode m) {
+	int	i;
+
+	i = lvl;
+	if ((true)||(lvl == 0))
+		fprintf(stderr, "%s", pfx);
+	else
+		i = lvl+strlen(pfx);
+	while(i-->0)
+		fprintf(stderr, "  ");
+	switch(m) {
+		case VOIDmode:
+			fprintf(stderr, "%s:V\n", str);
+			break;
+		case BLKmode:
+			fprintf(stderr, "%s:BLK\n", str);
+			break;
+		case BImode:
+			fprintf(stderr, "%s:BI\n", str);
+			break;
+#ifdef	HAVE_QImode
+		case QImode:
+			fprintf(stderr, "%s:QI\n", str);
+			break;
+#endif
+#ifdef	HAVE_HImode
+		case HImode:
+			fprintf(stderr, "%s:HI\n", str);
+			break;
+#endif
+		case SImode:
+			fprintf(stderr, "%s:SI\n", str);
+			break;
+		case DImode:
+			fprintf(stderr, "%s:DI\n", str);
+			break;
+		default:
+			fprintf(stderr, "%s:?\n", str);
+	}
+}
+
+static	void
+zip_debug_rtx_1(const char *pfx, const_rtx x, int lvl) {
+	if (x == NULL_RTX) {
+		zip_debug_print(pfx, lvl, "(NULL-RTX)");
+		return;
+	} else if (GET_CODE(x) > NUM_RTX_CODE) {
+		char	buf[64];
+		sprintf(buf, "(BAD-RTX-CODE %d)", GET_CODE(x));
+		zip_debug_print(pfx, lvl, buf);
+		return;
+	} switch(GET_CODE(x)) { // rtl.def
+	case PARALLEL: zip_debug_print(pfx, lvl, "(PARALLEL");
+		debug_rtx(x); break;
+	case INT_LIST: zip_debug_print(pfx, lvl, "(INT-LIST"); break;
+	case SEQUENCE: zip_debug_print(pfx, lvl, "(SEQUENCE"); break;
+	case ADDRESS: zip_debug_print(pfx, lvl, "(ADDRESS"); break;
+	case DEBUG_INSN: zip_debug_print(pfx, lvl, "(DEBUG-INSN"); break;
+	case INSN:
+		zip_debug_print(pfx, lvl, "(INSN");
+		/*
+		{ const rtx_insn *tmp_rtx;
+		for(tmp_rtx = as_a <const rtx_insn *>(x); tmp_rtx != 0; tmp_rtx = NEXT_INSN(tmp_rtx)) {
+			zip_debug_rtx_1(tmp_rtx, lvl+1);
+		}}
+		*/
+		zip_debug_rtx_1(pfx, PATTERN(x), lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case JUMP_INSN: zip_debug_print(pfx, lvl, "(JUMP-INSN");
+		zip_debug_rtx_1(pfx, PATTERN(x), lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		/*
+		if (JUMP_LABEL(x)) {
+			if (GET_CODE(JUMP_LABEL(x)) == LABEL_REF) {
+				char	buf[64];
+				sprintf(buf, "(LABEL *.L%d))", CODE_LABEL_NUMBER(LABEL_REF_LABEL(JUMP_LABEL(x))));
+				zip_debug_print(pfx, lvl+1, buf);
+			} else if (GET_CODE(JUMP_LABEL(x))==CODE_LABEL) {
+				char	buf[64];
+				sprintf(buf, "(CODE_LABEL *.L%d))", CODE_LABEL_NUMBER(JUMP_LABEL(x)));
+				zip_debug_print(pfx, lvl+1, buf);
+			} else
+			zip_debug_print(pfx, lvl+1, "(w/Label))");
+		} else
+			zip_debug_print(pfx, lvl+1, "(NO label))");
+		debug_rtx(x);
+		*/
+		break;
+	case CALL:
+		zip_debug_print(pfx, lvl, "(CALL (Adr) (Args)");
+		zip_debug_rtx_1(pfx, XEXP(x,0), lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1), lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case CALL_INSN: zip_debug_print(pfx, lvl, "(CALL-INSN");
+		debug_rtx(x);
+		break;
+	case BARRIER: zip_debug_print(pfx, lvl, "(BARRIER)"); break;
+	case RETURN: zip_debug_print(pfx, lvl, "(RETURN)"); break;
+	case NOTE:
+		{	char buf[128];
+			sprintf(buf, "(NOTE %s)", GET_REG_NOTE_NAME(GET_MODE(x)));
+			zip_debug_print(pfx, lvl, buf);
+		}break;
+	case COND_EXEC: zip_debug_print(pfx, lvl, "(COND_EXEC)");
+		debug_rtx(x);
+		break;
+	case ASM_INPUT: zip_debug_print(pfx, lvl, "(ASM INPUT)"); break;
+	case ASM_OPERANDS: zip_debug_print(pfx, lvl, "(ASM OPERANDS)"); break;
+	case UNSPEC: zip_debug_print(pfx, lvl, "(UNSPEC)"); break;
+	case UNSPEC_VOLATILE: zip_debug_print(pfx, lvl, "(UNSPEC_VOLATILE)"); break;
+	case CODE_LABEL:
+		{
+			char	buf[64];
+			sprintf(buf, "(CODE_LABEL *.L%d)", CODE_LABEL_NUMBER(x));
+			zip_debug_print_m(pfx, lvl, buf, GET_MODE(x));
+		} break;
+	case SET:
+		zip_debug_print_m(pfx, lvl, "(SET", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case REG:
+		if (REGNO(x) == zip_PC)
+			zip_debug_print(pfx, lvl, "(PC)");
+		else if (REGNO(x) == zip_CC)
+			zip_debug_print(pfx, lvl, "(CC0)");
+		else if (REGNO(x) == zip_SP)
+			zip_debug_print(pfx, lvl, "(SP)");
+		else if (REGNO(x) == zip_FP)
+			zip_debug_print(pfx, lvl, "(REG FP)");
+		else if (REGNO(x) == zip_GOT)
+			zip_debug_print(pfx, lvl, "(REG GBL)");
+		else if (FUNCTION_VALUE_REGNO_P(REGNO(x)))
+			zip_debug_print(pfx, lvl, "(REG RTN-VL)");
+		else if (REGNO(x) == RETURN_ADDRESS_REGNUM)
+			zip_debug_print(pfx, lvl, "(REG RTN-AD)");
+		else { char buf[25];
+		sprintf(buf, "(REG %d)", REGNO(x));
+		zip_debug_print_m(pfx, lvl, buf, GET_MODE(x));
+		} break;
+	case IF_THEN_ELSE: // 51
+		zip_debug_print(pfx, lvl, "(IF-THEN-ELSE");
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,2),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case PC:
+		zip_debug_print(pfx, lvl, "(PC)");
+		break;
+	case CC0:
+		zip_debug_print(pfx, lvl, "(CC0)");
+		break;
+	case COMPARE:
+		zip_debug_print(pfx, lvl, "(COMPARE");
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case CONST:
+		zip_debug_print_m(pfx, lvl, "(CONST", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case CONST_INT:
+		{ char buf[25];
+		if (GET_MODE(x)==SImode)
+			sprintf(buf, "(CONST_INT:SI %ld)", INTVAL(x));
+		else if (GET_MODE(x)==VOIDmode)
+			sprintf(buf, "(CONST_INT:V %ld)", INTVAL(x));
+		else
+			sprintf(buf, "(CONST_INT:? %ld)", INTVAL(x));
+		zip_debug_print(pfx, lvl, buf);
+		} break;
+	case LABEL_REF:
+		{ char buf[256], *bp;
+		sprintf(buf, "(LABEL *.L%d)", CODE_LABEL_NUMBER(LABEL_REF_LABEL(x)));
+		zip_debug_print(pfx, lvl, buf);
+		}
+		break;
+	case SYMBOL_REF:
+		{
+			char buf[64];
+			sprintf(buf, "(SYMBOL: %s)", XSTR(x,0));
+			// fprintf(file, "%s", XSTR(x,0));
+			zip_debug_print(pfx, lvl, buf);
+		}
+		break;
+	case MEM:
+		zip_debug_print_m(pfx, lvl, "(MEM", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	/*
+	case VALUE:
+		{
+			char buf[64];
+			sprintf(buf, "(VALUE: %d)", INTVAL(XEXP,0));
+			zip_debug_print_m(pfx, lvl, "buf", GET_MODE(x));
+		}
+		break;
+	*/
+	case PLUS:
+		zip_debug_print_m(pfx, lvl, "(PLUS", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case MINUS:
+		zip_debug_print_m(pfx, lvl, "(MINUS", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case AND:
+		zip_debug_print_m(pfx, lvl, "(AND", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case IOR:
+		zip_debug_print_m(pfx, lvl, "(OR", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case XOR:
+		zip_debug_print_m(pfx, lvl, "(XOR", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case MULT:
+		zip_debug_print_m(pfx, lvl, "(MULT", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case EQ:	// 
+		zip_debug_print_m(pfx, lvl, "(EQ", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case NE:	// 
+		zip_debug_print_m(pfx, lvl, "(NE", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case GE:	//
+		zip_debug_print_m(pfx, lvl, "(GE", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case GT:	//
+		zip_debug_print_m(pfx, lvl, "(GT", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case LE:	// 
+		zip_debug_print_m(pfx, lvl, "(LE", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case LT:	// 
+		zip_debug_print_m(pfx, lvl, "(LT", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case GEU:	// 
+		zip_debug_print_m(pfx, lvl, "(GEU", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case GTU:	// 
+		zip_debug_print_m(pfx, lvl, "(GTU", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case LEU:	// 
+		zip_debug_print_m(pfx, lvl, "(LEU", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case LTU:	// 
+		zip_debug_print_m(pfx, lvl, "(LTU", GET_MODE(x));
+		zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+		zip_debug_rtx_1(pfx, XEXP(x,1),lvl+1);
+		zip_debug_print(pfx, lvl, ")");
+		break;
+	case SCRATCH:	// 
+		zip_debug_print_m(pfx, lvl, "(SCRATCH)", GET_MODE(x));
+		break;
+	case SUBREG:
+		{ char buf[25];
+		if (REG_P(XEXP(x,0))) {
+			sprintf(buf, "(SUBREG %d/%d)", REGNO(XEXP(x,0)),
+				SUBREG_BYTE(x));
+			zip_debug_print(pfx, lvl, buf);
+		} else if (MEM_P(XEXP(x,0))) {
+			sprintf(buf, "(SUBREG /%d", SUBREG_BYTE(x));
+			zip_debug_print(pfx, lvl, buf);
+			zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+			zip_debug_print(pfx, lvl, ")");
+		} else {
+			sprintf(buf, "(SUBREG UNK /%d", SUBREG_BYTE(x));
+			zip_debug_print(pfx, lvl, buf);
+			zip_debug_rtx_1(pfx, XEXP(x,0),lvl+1);
+			zip_debug_print(pfx, lvl, ")");
+		}}
+		break;
+	default:
+		{ char buf[128];
+		sprintf(buf, "(? = %d) -- calling DEBUG-RTX", GET_CODE(x));
+		zip_debug_print(pfx, lvl, buf);
+		debug_rtx(x);
+		} break;
+	}
+}
+
+void
+zip_debug_rtx_pfx(const char *pfx, const_rtx x) {
+	zip_debug_rtx_1(pfx, x, 0);
+}
+
+void
+zip_debug_rtx(const_rtx x) {
+	zip_debug_rtx_pfx("", x);
+}
+
+void
+zip_debug_insn(rtx_insn *insn ATTRIBUTE_UNUSED) {
+}
+
+void
+zip_debug_bb(basic_block bb) {
+	rtx_insn	*insn;
+
+	fprintf(stderr, "************ BASIC-BLOCK ***************\n");
+	FOR_BB_INSNS(bb, insn)
+	{
+		zip_debug_rtx(insn);
+	}
+}
+
+
+static	bool
+zip_legitimate_opb(const_rtx x, bool strict)
+{
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) fprintf(stderr, "ZIP-LEGITIMATE-OPB\n");
+	if (dbg) zip_debug_rtx_pfx("Test: ", x);
+
+	if (NULL_RTX == x)
+		return false;
+	else if ((GET_MODE(x) != SImode)&&(GET_MODE(x) != VOIDmode))
+		return false;
+	else if (REG_P(x)) {
+		bool	res;
+		// Only insist the register b a valid register if strict is true
+		res = (!strict)||((is_ZIP_REG(REGNO(x)))&&(REGNO(x) != zip_CC));
+		if (dbg) fprintf(stderr, "ZIP-LEGITIMATE-OPB -> %s (Reg)\n",
+			(res)?"YES!":"No");
+		return res;
+	} else if ((!strict)&&(SUBREG_P(x))) {
+		// Only insist the register b a valid register if strict is true
+		if (dbg) fprintf(stderr, "ZIP-LEGITIMATE-OPB -> (Subreg(Reg),recurse)\n");
+		return zip_legitimate_opb(XEXP(x,0), strict);
+	} else if ((CONST_INT_P(x))
+		&&(INTVAL(x) >= zip_min_opb_imm)
+		&&(INTVAL(x) <= zip_max_opb_imm)) {
+		if (dbg) fprintf(stderr, "ZIP-LEGITIMATE-OPB -> YES! (Const)\n");
+		return true;
+	} else if (GET_CODE(x) == PLUS) {
+		// Is it a valid register?
+		if(!REG_P(XEXP(x,0))) {
+			if (dbg) fprintf(stderr, "ZIP-LEGITIMATE-OPB -> No (No reg in +%s)\n",
+			(GET_CODE(XEXP(x,1))==REG)?", reg in op[1]":"");
+			return false;
+		} if ((strict)&&((!is_ZIP_REG(REGNO(XEXP(x,0))))||(REGNO(XEXP(x,0)) == zip_CC))) {
+			if (dbg) fprintf(stderr, "ZIP-LEGITIMATE-OPB -> No (Wrong reg in +, %d)\n", REGNO(XEXP(x,0)));
+			return false;
+		} if ((GET_CODE(XEXP(x, 1)) == CONST_INT)
+			&&(INTVAL(XEXP(x, 1)) <= zip_max_anchor_offset)
+			&&(INTVAL(XEXP(x, 1)) >= zip_min_anchor_offset)) {
+			if (dbg) fprintf(stderr, "ZIP-LEGITIMATE-OPB -> YES! (reg+int)\n");
+			// if((INTVAL(XEXP(x,1))<0)&&(REGNO(XEXP(x,0))==zip_SP))
+				// gcc_unreachable();
+			return true;
+		} if ((GET_CODE(XEXP(x, 1)) == LABEL_REF)
+			||(GET_CODE(XEXP(x, 1)) == SYMBOL_REF)) {
+			// While we can technically support this, the problem
+			// is that the symbol address could be anywhere, and we
+			// have no way of recovering if it's outside of our
+			// 14 allowable bits.
+			if (dbg) fprintf(stderr, "ZIP-LEGITIMATE-OPB -> No. (reg+lbl)\n");
+			return false;
+		}
+		// if ((GET_CODE(XEXP(x, 1)) == MINUS)
+		//	&&((GET_CODE(XEXP(XEXP(x,1),0)) == LABEL_REF)
+		//		||(GET_CODE(XEXP(XEXP(x,1),0)) == CONST_INT)
+		//		||(GET_CODE(XEXP(XEXP(x,1),0)) == SYMBOL_REF))
+		//	&&((GET_CODE(XEXP(XEXP(x,1),1)) == LABEL_REF)
+		//		||(GET_CODE(XEXP(XEXP(x,1),0)) == CONST_INT)
+		//		||(GET_CODE(XEXP(XEXP(x,1),1)) == SYMBOL_REF))
+		//	&&((GET_CODE(XEXP(XEXP(x,1),0)))
+		//		== (GET_CODE(XEXP(XEXP(x,1),1))))) {
+		//	if (dbg) fprintf(stderr, "ZIP-LEGITIMATE-OPERAND-ADDRESS -> YES! (lbl-lbl+reg)\n");
+		//	return true;
+		//}
+	}
+
+	if (dbg) fprintf(stderr, "ZIP-LEGITIMATE-OPB -> No\n");
+	if (dbg) zip_debug_rtx(x);
+	return false;
+}
+
+static	bool
+zip_legitimate_move_operand_p(machine_mode mode ATTRIBUTE_UNUSED, rtx x, bool strict) {
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) fprintf(stderr, "ZIP-VALID-MOVE-OPERAND\n");
+	if (dbg) zip_debug_rtx_pfx("VMov?: ", x);
+
+	if (NULL_RTX == x)
+		return false;
+	else if (REG_P(x)) {
+		// Only insist the register b a valid register if strict is true
+		if (dbg) fprintf(stderr, "ZIP-VALID-MOVE-OPERAND -> YES! (Reg)\n");
+		return (!strict)||((is_ZIP_REG(REGNO(x)))&&(REGNO(x) !=zip_CC));
+	} else if (GET_CODE(x) == PLUS) {
+		// if (GET_CODE(XEXP(x,0))==PLUS) {
+		// return (zip_legitimate_opb(XEXP(x,0), strict))
+		// &&(zip_const_address_operand(XEXP(x,0)));
+		// }
+		// Is it a valid register?
+		if(GET_CODE(XEXP(x,0)) != REG) {
+			if (dbg) fprintf(stderr, "ZIP-VALID-MOVE-OPERAND -> No (No reg in +%s)\n",
+			(GET_CODE(XEXP(x,1))==REG)?", reg in op[1]":"");
+			return false;
+		} if ((strict)&&
+			((!is_ZIP_REG(REGNO(XEXP(x,0))))
+			||(REGNO(XEXP(x,0)) == zip_CC))) {
+			if (dbg) fprintf(stderr, "ZIP-VALID-MOVE-OPERAND -> No (Wrong reg in +, %d)\n", REGNO(XEXP(x,0)));
+			return false;
+		} if ((GET_CODE(XEXP(x, 1)) == CONST_INT)
+			&&(INTVAL(XEXP(x, 1)) <= zip_max_mov_offset)
+			&&(INTVAL(XEXP(x, 1)) >= zip_min_mov_offset)) {
+			if (dbg) fprintf(stderr, "ZIP-VALID-MOVE-OPERAND -> YES! (reg+int)\n");
+			return true;
+		}
+	}
+
+	if (dbg) fprintf(stderr, "ZIP-VALID-MOVE-OPERAND -> No\n");
+	if (dbg) zip_debug_rtx(x);
+	return false;
+}
+
+int
+zip_pd_mov_operand(rtx op)
+{
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) fprintf(stderr, "ZIP-VALID-MOV(predicate) for OPERAND\n");
+	return zip_legitimate_move_operand_p(VOIDmode, op, !can_create_pseudo_p());
+}
+
+int
+zip_pd_mvimm_operand(rtx op)
+{
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) fprintf(stderr, "ZIP-VALID-MVIMM(predicate) for OPERAND\n");
+	if (!CONST_INT_P(op))
+		return false;
+	if (INTVAL(op) > zip_max_mov_offset)
+		return false;
+	if (INTVAL(op) < zip_min_mov_offset)
+		return false;
+	return true;
+}
+
+int
+zip_pd_imm_operand(rtx op)
+{
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) fprintf(stderr, "ZIP-VALID-IMM(predicate) for OPERAND\n");
+	if (!CONST_INT_P(op))
+		return false;
+	if (INTVAL(op) > zip_max_anchor_offset)
+		return false;
+	if (INTVAL(op) < zip_min_anchor_offset)
+		return false;
+	return true;
+}
+
+int
+zip_address_operand(rtx op)
+{
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) fprintf(stderr, "ZIP-ADDRESS for OPERAND\n");
+	if ((REG_P(op))&&(REGNO(op)==zip_CC))
+		return false;
+	else if ((GET_CODE(op) == PLUS)&&(REG_P(XEXP(op,0)))
+			&&(REGNO(XEXP(op,0))==zip_CC))
+		return false;
+	else
+		return zip_legitimate_opb(op, !can_create_pseudo_p());
+}
+
+int
+zip_pd_opb_operand(rtx op)
+{
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) fprintf(stderr, "ZIP-OPB(predicate) for OPERAND\n");
+	return zip_legitimate_opb(op, !can_create_pseudo_p());
+}
+
+int
+zip_ct_address_operand(rtx op)
+{
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) fprintf(stderr, "ZIP-ADDRESS(constraint) for OPERAND\n");
+	return zip_legitimate_opb(op, !can_create_pseudo_p());
+}
+
+int
+zip_const_address_operand(rtx x) {
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) fprintf(stderr, "is ZIP-CONST-ADDRESS?\n");
+	if (dbg) zip_debug_rtx(x);
+	if ((GET_MODE(x) != SImode)&&(GET_MODE(x) != VOIDmode))
+		return false;
+	if ((GET_CODE(x) == LABEL_REF)
+			||(GET_CODE(x) == CODE_LABEL)
+			||(GET_CODE(x) == SYMBOL_REF)) {
+		if (dbg) fprintf(stderr, "is ZIP-CONST-ADDRESS? -> YES!\n");
+		return true;
+	} else if (CONST_INT_P(x)) {
+		if (dbg) fprintf(stderr, "is ZIP-CONST-ADDRESS? -> YES!\n");
+		return true;
+	} else if (GET_CODE(x) == PLUS) {
+		if (dbg) fprintf(stderr, "is ZIP-CONST-ADDRESS(PLUS)\n");
+		return ((zip_const_address_operand(XEXP(x,0)))
+			&&(CONST_INT_P(XEXP(x,1))));
+	} else if (GET_CODE(x) == MINUS) {
+		if (dbg) fprintf(stderr, "is ZIP-CONST-ADDRESS(MINUS)\n");
+		return ((zip_const_address_operand(XEXP(x,0)))
+			&&(zip_const_address_operand(XEXP(x,1))));
+	}
+
+	if (dbg) fprintf(stderr, "is ZIP-CONST-ADDRESS? -> No\n");
+	if (dbg) zip_debug_rtx(x);
+	return false;
+}
+
+int
+zip_ct_const_address_operand(rtx x) {
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) fprintf(stderr, "ZIP-CONST-ADDRESS(constraint)\n");
+	return zip_const_address_operand(x);
+}
+
+int
+zip_pd_const_address_operand(rtx x) {
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) fprintf(stderr, "ZIP-CONST-ADDRESS(predicate)\n");
+	return zip_const_address_operand(x);
+}
+
+
+static	bool
+zip_legitimate_address_p(machine_mode mode ATTRIBUTE_UNUSED, rtx x, bool strict)
+{
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) fprintf(stderr, "Zip-LEGITIMATE-ADDRESS-P\n");
+	if (dbg) zip_debug_rtx(x);
+
+	// Only insist the register be a valid register if strict is true
+	if (zip_legitimate_opb(x, strict))
+		return true;
+	// else if (zip_const_address_operand(x))
+		// return true;
+
+	return false;
+}
+
+static	rtx
+zip_legitimize_address(rtx x, rtx oldx ATTRIBUTE_UNUSED, machine_mode mode ATTRIBUTE_UNUSED) {
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) zip_debug_rtx_pfx("LEGITIMIZE: ", x);
+	if (zip_legitimate_address_p(mode, x, !can_create_pseudo_p()))
+		return x;
+
+	if (GET_CODE(x)==PLUS) {
+		if (!REG_P(XEXP(x,0)))
+			XEXP(x,0) = force_reg(GET_MODE(x),XEXP(x,0));
+		if ((!zip_legitimate_address_p(mode, x, !can_create_pseudo_p()))
+			&&(!CONST_INT_P(XEXP(x,1))))
+			x = force_reg(GET_MODE(x),x);
+	} else if (MEM_P(x))
+		x = force_reg(GET_MODE(x),x);
+
+	if (dbg) zip_debug_rtx_pfx("LEGITIMATE: ", x);
+	return x;
+}
+
+void
+zip_asm_output_def(FILE *stream, const char *name, const char *value)
+{
+	assemble_name(stream, name);
+	fprintf(stream, "\t.equ ");
+	assemble_name(stream, value);
+	fputc('\n', stream);
+}
+
+/*
+bool	zip_load_address_lod(rtx regrx, rtx memrx) {
+	fprintf(stderr, "ZIP-LOAD-ADDRESS-LOD\n");
+	if (!MEM_P(memrx))
+		return false;
+	if (GET_CODE(regrx) != REG)
+		return false;
+	enum	rtx_code ic = GET_CODE(memrx);
+	if ((ic == SYMBOL_REF)
+		||(ic == CODE_LABEL)
+		||(ic == LABEL_REF)) {
+		if (can_create_pseudo_p()) {
+			rtx scratch_reg;
+			scratch_reg = gen_rtx_SCRATCH(SImode);
+			emit_insn(gen_movsi_ldi(scratch_reg, XEXP(memrx, 0)));
+			emit_insn(gen_movsi_lod(regrx, scratch_reg));
+			return true;
+		} else return false;
+	} else return false;
+}
+
+bool	zip_load_address_sto(rtx memrx, rtx regrx) {
+	fprintf(stderr,  "CHECKING-IN-W/ZIP_LOAD_ADDRESS_STORE\n");
+	if (!MEM_P(memrx))
+		return false;
+	if (GET_CODE(regrx) != REG)
+		return false;
+	enum	rtx_code ic = GET_CODE(memrx);
+	if ((ic == SYMBOL_REF)
+		||(ic == CODE_LABEL)
+		||(ic == LABEL_REF)) {
+		if (can_create_pseudo_p()) {
+			rtx scratch_reg;
+			scratch_reg = gen_rtx_SCRATCH(SImode);
+			emit_insn(gen_movsi_ldi(scratch_reg, XEXP(memrx, 0)));
+			emit_insn(gen_movsi_sto(scratch_reg, regrx));
+			return true;
+		} else return false;
+	} return false;
+}
+*/
+
+#define	USE_SUBREG
+#ifdef	USE_SUBREG
+#define	SREG_P(RTX) ((SUBREG_P(RTX))&&(REG_P(XEXP(RTX,0))))
+#define	SMEM_P(RTX) ((SUBREG_P(RTX))&&(MEM_P(XEXP(RTX,0))))
+#else
+#define	SREG_P(RTX)	false
+#define	SMEM_P(RTX)	false
+#endif
+
+bool	zip_gen_move_rtl(rtx dst, rtx src) {
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+
+	if (dbg) fprintf(stderr, "ZIP-GEN-MOVE\n");
+	if (dbg) zip_debug_rtx_pfx("FROM: ", src);
+	if (dbg) zip_debug_rtx_pfx("TO  : ", dst);
+	if (dbg) fprintf(stderr, "PSEUDOs: %s\n", can_create_pseudo_p()?"true":"false");
+	if (((REG_P(dst))||(SREG_P(dst)))
+			&&((REG_P(src))||(SREG_P(src)))) {
+		// First type of move... register to register
+		if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/REG -- EMIT\n");
+		// if (SREG_P(dst)) dst = gen_raw_REG(SImode,REGNO(XEXP(dst,0))+SUBREG_BYTE(dst));
+		// if (SREG_P(src)) src = gen_raw_REG(SImode,REGNO(XEXP(src,0))+SUBREG_BYTE(src));
+		emit_insn(gen_movsi_reg(dst, src));
+	} else if ((MEM_P(dst))&&(MEM_P(XEXP(dst,0)))) {
+		// An indirect store, (mem (mem (addr .))) = whatever ...
+		if (can_create_pseudo_p()) {
+			rtx	tmp = gen_reg_rtx(Pmode);
+			zip_gen_move_rtl(tmp, XEXP(dst,0));
+			// mark_reg_pointer(tmp,0);
+			zip_gen_move_rtl(gen_rtx_MEM(GET_MODE(src), tmp), src);
+		} else {
+			fprintf(stderr, "ZIP:Cannot move into mem w/o pseudo\n");
+			return false;
+		}
+	} else if ((MEM_P(src))&&(MEM_P(XEXP(src,0)))) {
+		// If this is an indirect load, Rx = (mem (mem (addr)))
+		if (can_create_pseudo_p()) {
+			rtx	tmp = gen_reg_rtx(Pmode);
+			zip_gen_move_rtl(tmp, XEXP(src,0));
+			// mark_reg_pointer(tmp,0);
+			zip_gen_move_rtl(dst, gen_rtx_MEM(GET_MODE(src), tmp));
+		} else {
+			fprintf(stderr, "ZIP: Cannot move from mem(mem(ptr)) w/o pseudo\n");
+			return false;
+		}
+	} else if (((REG_P(dst))||(SREG_P(dst)))&&(GET_CODE(src)==PLUS)
+			&&(REG_P(XEXP(src,0)))
+			&&(CONST_INT_P(XEXP(src,1)))) {
+		// if (SREG_P(dst)) dst = gen_raw_REG(SImode,REGNO(XEXP(dst,0))+SUBREG_BYTE(dst));
+		// Second type of move... register plus offset to register
+		if ((INTVAL(XEXP(src, 1)) <= zip_max_mov_offset)
+			&&(INTVAL(XEXP(src, 1)) >= zip_min_mov_offset)) {
+			// The offset is within bounds
+			if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/REG+OFF -- EMIT\n");
+			emit_insn(gen_movsi_reg_off(dst, XEXP(src,0),XEXP(src,1)));
+		} else if (can_create_pseudo_p()) {
+			// The offset is out of bounds, get a new register and
+			// generate an add instruction to split this up.
+			rtx	tmp = gen_reg_rtx(GET_MODE(XEXP(src,0)));
+
+			if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/LDI\n");
+			emit_insn(gen_movsi_ldi(tmp, XEXP(src,1)));
+			if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/ADD\n");
+			emit_insn(gen_addsi3(tmp, tmp, XEXP(src,0)));
+			if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/DST\n");
+			emit_insn(gen_movsi_reg(dst, tmp));
+		} else {
+			fprintf(stderr, "ZIP: Cannot move a(r),b w/o pseudo for out of bounds a\n");
+			return false;
+		}
+	} else if ((MEM_P(dst))&&(MEM_P(src))) {
+		rtx	tmp;
+		if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/MEM/MEM\n");
+		if (can_create_pseudo_p()) {
+			tmp = gen_reg_rtx(GET_MODE(src));
+			emit_insn(gen_movsi(tmp, src));
+			emit_insn(gen_movsi(dst, tmp));
+		} else {
+			fprintf(stderr, "ZIP: Cannot move mem(A) to mem(B) w/o pseudo\n");
+			return false;
+		}
+	} else if (((REG_P(dst))||(SREG_P(dst)))&&(MEM_P(src))) {
+		// Memory load
+		// if (SREG_P(dst)) dst = gen_raw_REG(SImode,REGNO(XEXP(dst,0))+SUBREG_BYTE(dst));
+		if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/LOD\n");
+		if (zip_legitimate_opb(XEXP(src, 0), false)) {
+			if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/SIMPLE-LOD(ADDR)\n");
+			if (dbg) zip_debug_rtx_pfx("Smple-Addr: ", src);
+			emit_insn(gen_movsi_lod(dst, src));
+		} else if (zip_const_address_operand(XEXP(src,0))) {
+			if (can_create_pseudo_p()) {
+				rtx	tmp;
+				if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/LOD(CONST-ADDR)\n");
+				tmp = gen_reg_rtx(Pmode);
+				emit_insn(gen_movsi_ldi(tmp, XEXP(src,0)));
+				emit_insn(gen_movsi_lod(dst, gen_rtx_MEM(GET_MODE(src),tmp)));
+			} else {
+				if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/LOD(CONST-ADDR,SELF)\n");
+				emit_insn(gen_movsi_ldi(dst, XEXP(src,0)));
+				emit_insn(gen_movsi_lod(dst, gen_rtx_MEM(GET_MODE(src),dst)));
+			}
+		} else {
+			internal_error("%s", "ZIP/No usable load\n");
+		}
+	} else if ((MEM_P(dst))&&((REG_P(src))||(SREG_P(src)))) {
+		// Memory store
+		// if (SREG_P(src)) src = gen_raw_REG(SImode,REGNO(XEXP(src,0))+SUBREG_BYTE(src));
+		if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/STO\n");
+		if (zip_legitimate_opb(XEXP(dst, 0), false)) {
+			// If it's a legitimate address already, do nothing mor
+			if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/STO(Legit Addr)--EMIT\n");
+			// if (REG_P(XEXP(dst,0)))
+				// mark_reg_pointer(XEXP(dst,0),0);
+			// else if ((GET_CODE(XEXP(dst,0))==PLUS)
+					// &&(REG_P(XEXP(XEXP(dst,0),0))))
+				// mark_reg_pointer(XEXP(XEXP(dst,0),0),0);
+			emit_insn(gen_movsi_sto(dst, src));
+		} else if (zip_const_address_operand(XEXP(dst,0))) {
+			rtx	tmp;
+
+			if (can_create_pseudo_p()) {
+				if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/STO(Const Addr,Reg) -- EMIT\n");
+				// Otherwise we need to load the memory address
+				// into a register
+				tmp = gen_reg_rtx(Pmode);
+				// mark_reg_pointer(tmp,0);
+				emit_insn(gen_movsi_ldi(tmp, XEXP(dst,0)));
+				//
+				// Then we can do our load
+				if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/STO -- emit\n");
+				emit_insn(gen_movsi_sto(gen_rtx_MEM(GET_MODE(src), tmp), src));
+			} else {
+				fprintf(stderr, "Cannot move src -> mem(dst) w/o pseudo\n");
+				return false;
+			}
+		} else if (can_create_pseudo_p())
+			internal_error("%s", "ZIP/No usable store\n");
+		else {
+			fprintf(stderr, "ZIP/Unanticipated store problem\n");
+			return false;
+		}
+		if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/STO -- DONE\n");
+	} else if ((MEM_P(dst))&&((CONST_INT_P(src))||(GET_CODE(src)==SYMBOL_REF))) {
+		// Store a constant into memory
+		rtx	tmp;
+
+		if (can_create_pseudo_p()) {
+			if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/CONST->MEM\n");
+			// Load the source constant into a register first
+			tmp = gen_reg_rtx((GET_MODE(src)==VOIDmode)?GET_MODE(dst):GET_MODE(src));
+			emit_insn(gen_movsi_ldi(tmp,src));
+			if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/CONST->REG->MEM -- RECURSE\n");
+
+			// Then do a normal move, recursing to handle memory
+			// properly
+			zip_gen_move_rtl(dst, tmp);
+			if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/CONST->MEM -- DONE\n");
+		} else {
+			fprintf(stderr, "ZIP/Cannot store constant into mem w/o pseudo\n");
+			return false;
+		}
+	} else if (((REG_P(dst))||(SREG_P(dst)))&&(CONST_INT_P(src))) {
+		// if (SREG_P(dst)) dst = gen_raw_REG(SImode,REGNO(XEXP(dst,0))+SUBREG_BYTE(dst));
+		// Load a constant into a register
+		// The assembler really takes care of all of this, since
+		// the assembler will split the constant if it doesn't fit
+		// into a single instruction.
+		if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/CONST->REG\n");
+		// if ((GET_MODE(dst)==VOIDmode)&&(GET_MODE(src)==VOIDmode))
+			// PUT_MODE(dst,SImode);
+		emit_insn(gen_movsi_ldi(dst, src));
+	} else if ((REG_P(dst))&&
+			((LABEL_P(src))
+			||(GET_CODE(src)==SYMBOL_REF)
+			||(GET_CODE(src)==LABEL_REF))) {
+		// Load a constant into a register
+		// The assembler really takes care of all of this, since
+		// the assembler will split the constant if it doesn't fit
+		// into a single instruction.
+		if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/LABEL->REG\n");
+		emit_insn(gen_movsi_ldi(dst, src));
+	} else if ((REG_P(dst))&&
+			((GET_CODE(src)==PLUS)
+			&&((GET_CODE(XEXP(src,0))==SYMBOL_REF)
+				||(GET_CODE(XEXP(src,0))==LABEL_REF))
+			&&(CONST_INT_P(XEXP(src,1))))) {
+		if (dbg) fprintf(stderr, "ZIP-GEN-MOVE/LABEL+OFFSET->REG\n");
+		if ((INTVAL(XEXP(src,1))>=zip_min_mov_offset)
+			&&(INTVAL(XEXP(src,1))<=zip_max_mov_offset)) {
+			emit_insn(gen_movsi_ldi(dst, XEXP(src,1)));
+			emit_insn(gen_movsi_reg_off(dst, dst, XEXP(src,1)));
+		} else if (can_create_pseudo_p()) {
+			rtx tmp = gen_reg_rtx(Pmode);
+			emit_insn(gen_movsi_ldi(tmp, XEXP(src,1)));
+			emit_insn(gen_movsi_ldi(dst, src));
+			emit_insn(gen_addsi3(dst,dst,tmp));
+			return true;
+		} else {
+			fprintf(stderr, "Cannot move LABEL+OFFSET -> dst w/o pseudo\n");
+			return false;
+		}
+	} else if (((REG_P(dst))||(SREG_P(dst)))&&(GET_CODE(src) == CONST)) {
+		// if (SREG_P(dst)) dst = gen_raw_REG(SImode,REGNO(XEXP(dst,0))+SUBREG_BYTE(dst));
+		zip_gen_move_rtl(dst, XEXP(src,0));
+	} else if (SMEM_P(dst)) {
+		rtx	addr = XEXP(XEXP(dst,0),0);
+		if (REG_P(addr)) {
+			zip_gen_move_rtl(
+				gen_rtx_MEM(SImode, plus_constant(Pmode,addr,
+					SUBREG_BYTE(dst),false)),src);
+		} else if ((GET_CODE(addr)==PLUS)
+				&&(REG_P(XEXP(addr,0)))
+				&&(CONST_INT_P(XEXP(addr,1)))) {
+			rtx addreg = XEXP(addr,0);
+			zip_gen_move_rtl(
+				gen_rtx_MEM(SImode, plus_constant(Pmode,addreg,
+					INTVAL(XEXP(addr,1))+SUBREG_BYTE(dst),
+					false)),src);
+		} else fprintf(stderr, "ZIP/Cannot understand SUBREG\n");
+	} else if (SMEM_P(src)) {
+		rtx	addr = XEXP(XEXP(src,0),0);
+		if (REG_P(addr)) {
+			zip_gen_move_rtl(dst,
+				gen_rtx_MEM(SImode, plus_constant(Pmode,addr,
+					SUBREG_BYTE(src),false)));
+		} else if ((GET_CODE(addr)==PLUS)
+				&&(REG_P(XEXP(addr,0)))
+				&&(CONST_INT_P(XEXP(addr,1)))) {
+			rtx addreg = XEXP(addr,0);
+			zip_gen_move_rtl(dst,
+				gen_rtx_MEM(SImode, plus_constant(Pmode,addreg,
+					INTVAL(XEXP(addr,1))+SUBREG_BYTE(src),
+					false)));
+		} else fprintf(stderr, "ZIP/Cannot understand SUBREG\n");
+	} else {
+		fprintf(stderr, "ZIP/No usable move\n");
+		zip_debug_rtx_pfx("TO  : ", dst);
+		zip_debug_rtx_pfx("FROM: ", src);
+		debug_rtx(dst);
+		debug_rtx(src);
+		return false;
+	}
+	if (dbg) fprintf(stderr, "ZIP-GEN-MOVE -- DONE\n");
+	return true;
+}
+
+const char *zip_set_zero_or_one(rtx condition, rtx dst) {
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+	if (dbg) fprintf(stderr, "ZIP::SET-ZERO-OR-ONE\n");
+	if (dbg) zip_debug_rtx_pfx("CND", condition);
+	if (dbg) zip_debug_rtx_pfx("REG", dst);
+	switch(GET_CODE(condition)) {
+	case EQ:	return "LDI\t0,%0\n\tLDILO.Z\t1,%0";
+	case NE:	return "LDI\t0,%0\n\tLDILO.NZ\t1,%0";
+	case LT:	return "LDI\t0,%0\n\tLDILO.LT\t1,%0";
+	case GT:	return "LDI\t0,%0\n\tLDILO.GT\t1,%0";
+	case LE:	return "LDI\t1,%0\n\tLDILO.GT\t0,%0";
+	case GE:	return "LDI\t0,%0\n\tLDILO.GE\t1,%0";
+	case LTU:	return "LDI\t0,%0\n\tLDILO.C\t1,%0";
+	case GTU:	return "LDI\t1,%0\n\tLDILO.C\t0,%0\n\tLDILO.Z\t0,%0";
+	case LEU:	return "LDI\t0,%0\n\tLDILO.C\t1,%0\n\tLDILO.Z\t1,%0";
+	case GEU:	return "LDI\t1,%0\n\tLDILO.C\t0,%0";
+	default:
+		zip_debug_rtx(condition);
+		internal_error("CSTORE Unsupported condition");
+		return NULL;
+	}
+}
+
+const char *zip_binary_movsicc(rtx_code condition, const char *op, const int opno) {
+	static char	result[64] = "";
+	switch(condition) {
+		//
+		// Result already exists in the iffalse register
+		// Can't change it.  Therefore, on the
+		// condition ... move true register to the
+		// destination
+		//
+		case EQ:	sprintf(result, "%s.Z\t%%%d,%%0", op, opno); break;
+		case NE:	sprintf(result, "%s.NZ\t%%%d,%%0", op, opno); break;
+		case LT:	sprintf(result, "%s.LT\t%%%d,%%0", op, opno); break;
+		case GT:	sprintf(result, "%s.GT\t%%%d,%%0", op, opno); break;
+		// .LE doesn't exist on Zip CPU--turn this into two instructions
+		case LE:	sprintf(result, "%s.LT\t%%%d,%%0\n\t%s.Z\t%%%d,%%0", op, opno, op, opno); break;
+		case GE:	sprintf(result, "%s.GE\t%%%d,%%0", op, opno); break;
+		case LTU:	sprintf(result, "%s.C\t%%%d,%%0", op, opno); break;
+		// 
+		// .GTU doesn't exist on the Zip CPU either. We also note that
+		// .C will never be set on an equal condition.  Therefore, we
+		// turn this into a XOR.NZ 2,CC, which will set the .C condition
+		// as long as .Z wasn't true.  We then undo this when we're
+		// done.  This is possible since none of these instructions
+		// (LDI/MOV/Lod conditional, nor Xor conditional) will ever set
+		// the condition codes.
+		//
+		// This is obviously not very optimal.  Avoid this by all means
+		// if you can
+		case GTU:	sprintf(result, "XOR.NZ\t2,CC\n%s.C\t%%%d,%%0\n\tXOR.NZ\t2,CC", op, opno); break;
+		// .LEU doesn't exist on Zip CPU either--turn this into another
+		// two instructions
+		case LEU:	sprintf(result, "%s.C\t%%%d,%%0\n\t%s.Z\t%%%d,%%0", op, opno, op, opno); break;
+		//
+		// .GEU doesn't exist on Zip CPU.  Implementing it her is
+		// painful.  We can change the condition codes to make it so,
+		// but the instruction requires the condition codes not be
+		// changed.  Hence, we must change them back if we do so.
+		//
+		// .C will be set on less than but not equal.  Hence !.C will
+		// be true on greater than or equal.
+		case GEU:	sprintf(result, "XOR\t2,CC\n%s.C\t%%%d,%%0\n\tXOR\t2,CC", op, opno); break;
+		default:
+			internal_error("MOVSICC(BINARY) Unsupported condition");
+			return NULL;
+	} return result;
+}
+
+const char *zip_tertiary_movsicc(rtx condition, const char *optrue, const char *opfalse) {
+	static	char	result[64] = "";
+	switch(GET_CODE(condition)) {
+		case EQ:	sprintf(result,"%s\t%%3,%%0\n\t%s.Z\t%%2,%%0", opfalse, optrue); break;
+		case NE:	sprintf(result,"%s\t%%3,%%0\n\t%s.NZ\t%%2,%%0", opfalse, optrue); break;
+		case LT:	sprintf(result,"%s\t%%3,%%0\n\t%s.LT\t%%2,%%0", opfalse, optrue); break;
+		case GT:	sprintf(result,"%s\t%%3,%%0\n\t%s.GT\t%%2,%%0", opfalse, optrue); break;
+		// LE doesn't exist on a Zip CPU.  Accomplish this by
+		// reversing the condition: i.e., load the false value into
+		// the register, and the on condition load the true value.
+		case LE:	sprintf(result,"%s\t%%2,%%0\n\t%s.GT\t%%3,%%0", optrue, opfalse); break;
+		case GE:	sprintf(result,"%s\t%%3,%%0\n\t%s.GE\t%%2,%%0", opfalse, optrue); break;
+		case LTU:	sprintf(result,"%s\t%%3,%%0\n\t%s.C\t%%2,%%0", opfalse, optrue); break;
+		//
+		case GTU:	sprintf(result,"%s\t%%2,%%0\n\t%s.C\t%%3,%%0\n\t%s.Z\t%%3,%%0", optrue, opfalse, opfalse); break;
+		case LEU:	sprintf(result,"%s\t%%3,%%0\n\t%s.C\t%%2,%%0\n\t%s.Z\t%%2,%%0", opfalse, optrue, optrue); break;
+		case GEU:	sprintf(result,"%s\t%%2,%%0\n\t%s.C\t%%3,%%0\n", optrue, opfalse); break;
+		default:
+			internal_error("MOVSICC Unsupported condition");
+			return NULL;
+	} return result;
+}
+
+const char *zip_movsicc(rtx dst, rtx condition, rtx iftrue, rtx iffalse) {
+	const bool	dbg = ((ALL_DEBUG_ON)||(false))&&(!ALL_DEBUG_OFF);
+	if (dbg) fprintf(stderr, "ZIP::MOVSICC\n");
+	if (dbg) zip_debug_rtx_pfx("DST", dst);
+	if (dbg) zip_debug_rtx_pfx("CND", condition);
+	if (dbg) zip_debug_rtx_pfx("TRU", iftrue);
+	if (dbg) zip_debug_rtx_pfx("FAL", iffalse);
+	if ((REG_P(iftrue))&&(REGNO(dst)==REGNO(iftrue))) {
+		if (dbg) fprintf(stderr, "ZIP::MOVSICC -- CASE if(X) -> R\n");
+		if (zip_legitimate_move_operand_p(SImode, iffalse, true))
+			return zip_binary_movsicc(reverse_condition(GET_CODE(condition)), "MOV", 3);
+		else if (zip_const_address_operand(iffalse))
+			return zip_binary_movsicc(reverse_condition(GET_CODE(condition)), "LDI", 3);
+		else if (zip_const_address_operand(iffalse))
+			return zip_binary_movsicc(reverse_condition(GET_CODE(condition)), "LDI", 3);
+		else if ((MEM_P(iffalse))&&(zip_legitimate_opb(XEXP(iffalse,0), true)))
+			return zip_binary_movsicc(reverse_condition(GET_CODE(condition)), "LOD", 3);
+		else {
+			internal_error("MOVSICC Unsupported mode");
+			return NULL;
+		}
+	} if ((REG_P(iftrue))&&(REGNO(dst)==REGNO(iftrue))) {
+		if (dbg) fprintf(stderr, "ZIP::MOVSICC -- CASE if(!X) -> R\n");
+		if (zip_legitimate_move_operand_p(SImode, iftrue, true))
+			return zip_binary_movsicc(GET_CODE(condition), "MOV",2);
+		else if (zip_const_address_operand(iffalse))
+			return zip_binary_movsicc(GET_CODE(condition), "LDI",2);
+		else if (zip_const_address_operand(iffalse))
+			return zip_binary_movsicc(GET_CODE(condition), "LDI",2);
+		else if ((MEM_P(iffalse))&&(zip_legitimate_opb(XEXP(iffalse,0), true)))
+			return zip_binary_movsicc(GET_CODE(condition), "LOD",2);
+		else {
+			internal_error("MOVSICC Unsupported mode");
+			return NULL;
+		}
+	} if ((zip_const_address_operand(iftrue))&&(zip_const_address_operand(iffalse))) {
+		if (dbg) fprintf(stderr, "ZIP::MOVSICC -- IF(X) #1 ELSE #2\n");
+		return zip_tertiary_movsicc(condition, "LDI", "LDI");
+	} if ((zip_const_address_operand(iftrue))&&(zip_legitimate_move_operand_p(SImode, iffalse, true))) {
+		if (dbg) fprintf(stderr, "ZIP::MOVSICC -- IF(X) #1 ELSE A+B\n");
+		return zip_tertiary_movsicc(condition, "LDI", "MOV");
+	} if ((zip_legitimate_move_operand_p(SImode, iftrue, true))&&(zip_const_address_operand(iffalse))) {
+		if (dbg) fprintf(stderr, "ZIP::MOVSICC -- IF(X) A+B ELSE #x\n");
+		return zip_tertiary_movsicc(condition, "MOV", "LDI");
+	} if ((zip_legitimate_move_operand_p(SImode, iftrue, true))
+			&&(zip_legitimate_move_operand_p(SImode, iffalse, true))) {
+		if (dbg) fprintf(stderr, "ZIP::MOVSICC -- IF(X) A+B ELSE C+D\n");
+		return zip_tertiary_movsicc(condition, "MOV", "MOV");
+	} 
+	if ((MEM_P(iftrue))
+		&&(zip_legitimate_opb(XEXP(iftrue,0), true))
+		&&(zip_legitimate_move_operand_p(SImode, iffalse, true))) {
+		if (dbg) fprintf(stderr, "ZIP::MOVSICC -- IF(X) A[B] ELSE C+D\n");
+		return zip_tertiary_movsicc(condition, "LOD", "MOV");
+	} if ((zip_legitimate_move_operand_p(SImode, iftrue, true))
+		&&(MEM_P(iffalse))&&(zip_legitimate_opb(XEXP(iffalse,0), true))) {
+		if (dbg) fprintf(stderr, "ZIP::MOVSICC -- IF(X) A+B ELSE C[D]\n");
+		return zip_tertiary_movsicc(condition, "MOV", "LOD");
+	} if ((MEM_P(iftrue))&&(zip_legitimate_opb(XEXP(iftrue,0), true))
+		&&(MEM_P(iffalse))&&(zip_legitimate_opb(XEXP(iffalse,0), true))) {
+		if (dbg) fprintf(stderr, "ZIP::MOVSICC -- IF(X) A[B] ELSE C[D]\n");
+		return zip_tertiary_movsicc(condition, "LOD", "LOD");
+	} if ((MEM_P(iftrue))
+		&&(zip_legitimate_opb(XEXP(iftrue,0),true))
+		&&(zip_const_address_operand(iffalse))) {
+		if (dbg) fprintf(stderr, "ZIP::MOVSICC -- IF(X) A[B] ELSE #x\n");
+		return zip_tertiary_movsicc(condition, "LOD", "LDI");
+	} if ((MEM_P(iffalse))
+		&&(zip_legitimate_opb(XEXP(iffalse,0),true))
+		&&(zip_const_address_operand(iftrue))) {
+		if (dbg) fprintf(stderr, "ZIP::MOVSICC -- IF(X) #x ELSE A[B]\n");
+		return zip_tertiary_movsicc(condition, "LDI", "LOD");
+	}
+
+	internal_error("MOVSICC Operands not supported");
+}
+
+const char *zip_addsicc(rtx dst, rtx condition, rtx ifsrc, rtx addv ATTRIBUTE_UNUSED) {
+	// We know upon entry that REG_P(dst) must be true
+	if (!REG_P(dst))
+		internal_error("%s","ADDSICC into something other than register");
+	if ((REG_P(ifsrc))&&(REGNO(dst)==REGNO(ifsrc))) {
+		switch (GET_CODE(condition)) {
+		case EQ: return "ADD.Z\t%3,%0";
+		case NE: return "ADD.NZ\t%3,%0";
+		case LT: return "ADD.LT\t%3,%0";
+		case GT: return "ADD.GT\t%3,%0";
+		case LE: return "ADD.LT\t%3,%0\n\tADD.Z\t%3,%0";
+		case GE: return "ADD.GE\t%3,%0";
+		case LTU: return "ADD.C\t%3,%0";
+		case LEU: return "ADD.C\t%3,%0\n\tADD.Z\t%3,%0";
+		case GEU: return "XOR\t2,CC\n\tADD.C\t%3,%0\n\tXOR\t2,CC";
+		// Can do a GEU comparison, and then undo on the Zero condition
+		case GTU: return "XOR\t2,CC\n\tADD.C\t%3,%0\n\tSUB.Z\t%3,%0\n\tXOR\t2,CC";
+		default:
+			internal_error("%s", "Zip/No usable addsi expansion");
+			break;
+		}
+	} else {
+		// MOV A+REG,REG
+		switch (GET_CODE(condition)) {
+		case EQ: return "MOV.Z\t%3+%2,%0";
+		case NE: return "MOV.NZ\t%3+%2,%0";
+		case LT: return "MOV.LT\t%3+%2,%0";
+		case GT: return "MOV.GT\t%3+%2,%0";
+		case LE: return "MOV.LT\t%3+%2,%0\n\tMOV.Z\t%3+%2,%0";
+		case GE: return "MOV.GE\t%3+%2,%0";
+		case LTU: return "MOV.C\t%3+%2,%0";
+		case LEU: return "MOV.C\t%3+%2,%0\n\tMOV.Z\t%3+%2,%0";
+		case GEU: return "XOR\t2,CC\n\tMOV.C\t%3+%2,%0\n\tXOR\t2,CC";
+		// Can do a GEU comparison, and then undo on the Zero condition
+		// EXCEPT: with a move instruction, what's there to undo?  We
+		// just clobbered our register!
+		// case GTU: return "XOR\t2,CC\n\tMOV.C\t%3,%0\n\tSUB.Z\t%3,%0XOR\t2,CC";
+		default:
+			internal_error("%s", "Zip/No usable addsi(reg,reg) expansion");
+			break;
+		}
+	}
+
+	return "BREAK";
+}
+
+static	int	zip_memory_move_cost(machine_mode mode, reg_class_t ATTRIBUTE_UNUSED, bool in ATTRIBUTE_UNUSED) {
+	int	rv = 14;
+	if ((mode == DImode)||(mode == DFmode))
+		rv += 2;
+	return rv;
+}
+
+// #warning "How do we tell the compiler LDI label is expensive as 2 ops"?
+
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/zip/zip.h gcc-5.3.0-zip/gcc/config/zip/zip.h
--- gcc-5.3.0-original/gcc/config/zip/zip.h	1969-12-31 19:00:00.000000000 -0500
+++ gcc-5.3.0-zip/gcc/config/zip/zip.h	2016-03-19 12:03:33.888255495 -0400
@@ -0,0 +1,3889 @@
+////////////////////////////////////////////////////////////////////////////////
+//
+// Filename: 	gcc/config/zip/zip.h
+//
+// Project:	Zip CPU backend for the GNU Compiler Collection
+//
+// Purpose:	
+//
+// Creator:	Dan Gisselquist, Ph.D.
+//		Gisselquist Technology, LLC
+//
+////////////////////////////////////////////////////////////////////////////////
+//
+// Copyright (C) 2016, Gisselquist Technology, LLC
+//
+// This program is free software (firmware): you can redistribute it and/or
+// modify it under the terms of  the GNU General Public License as published
+// by the Free Software Foundation, either version 3 of the License, or (at
+// your option) any later version.
+//
+// This program is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with this program.  (It's in the $(ROOT)/doc directory, run make with no
+// target there if the PDF file isn't present.)  If not, see
+// <http://www.gnu.org/licenses/> for a copy.
+//
+// License:	GPL, v3, as defined and found on www.gnu.org,
+//		http://www.gnu.org/licenses/gpl.html
+//
+//
+////////////////////////////////////////////////////////////////////////////////
+#ifndef	GCC_ZIP_H
+#define	GCC_ZIP_H
+
+
+//
+//
+// Zip CPU configuration registers
+//
+//
+#define	ZIP_USER	0	// Assume we are in supervisor mode
+#define	ZIP_MULTIPLY	1	// Assume we have multiply instructions
+#define	ZIP_DIVIDE	1	// Assume we have divide instructions
+#define	ZIP_FPU		0	// Assume we have no floating point instructions
+#define	ZIP_PIPELINED	1	// Assume our instructions are pipelined
+#define	ZIP_VLIW	1	// Assume we have the VLIW feature
+#define	ZIP_ATOMIC	((ZIP_PIPELINED)&&(ZIP_VLIW))
+#define	ZIP_PIC		0	// Attempting to produce PIC code, with GOT
+#define	ZIP_HAS_DI	1
+
+// Zip has 16 registers in each user mode.
+//	Register 15 is the program counter (PC)
+//	Register 14 is the condition codes (CC)
+//	Register 13 is the stack pointer   (SP)
+//	Register 12 (may be) the Global Offset Table pointer (GOT)
+//	Register  0 (may be) the return address pointer
+// Registers 16-31 may only be used in supervisor mode.
+#define	is_ZIP_GENERAL_REG(REGNO)	((REGNO)<13)
+#define	is_ZIP_REG(REGNO)		((REGNO)<16)
+
+// #define	zip_FP_PSEUDO	16
+#define	zip_PC		15
+#define	zip_CC		14
+#define	zip_SP		13
+#define	zip_FP		12
+#define	zip_GOT		11
+#define	zip_AP		10
+#define	zip_R1		1
+#define	zip_R0		0
+
+#define	ZIP_FIRST_ARG_REGNO	1
+#define	ZIP_LAST_ARG_REGNO	5
+#define	NUM_ARG_REGS		(ZIP_LAST_ARG_REGNO-ZIP_FIRST_ARG_REGNO+1)
+#define	MAX_PARM_REGS		(ZIP_LAST_ARG_REGNO-ZIP_FIRST_ARG_REGNO+1)
+
+/* The overall framework of an assembler file */
+
+#define	ASM_COMMENT_START	";"
+#define	ASM_APP_ON		""
+#define	ASM_APP_OFF		""
+
+#define	FILE_ASM_OP		"\t.file\n"
+
+/* Output and Generation of Labels */
+#define	GLOBAL_ASM_OP		"\t.global\t"
+
+#undef	BITS_PER_UNIT
+#define	BITS_PER_UNIT	(32)
+
+/* Assembler Commands for Alignment */
+#define	ASM_OUTPUT_ALIGN(STREAM,POWER)	\
+		{ int pwr = POWER; fprintf(STREAM, "\t.p2align %d\n", (pwr<2)?2:pwr); }
+
+
+/* A C compound statement to output to stdio stream STREAM the assembler syntax
+ * for an instruction operand X. */
+#define	PRINT_OPERAND(STREAM, X, CODE)	zip_print_operand(STREAM, X, CODE)
+#define	PRINT_OPERAND_ADDRESS(STREAM, X) zip_print_operand_address(STREAM, X)
+
+/* Passing arguments in registers */
+#define	FUNCTION_VALUE_REGNO_P(REGNO)	((REGNO)==zip_R1)
+
+/* Define how to find the value returned by a function.  VALTYPE is the data
+ * type of the value (as a tree).  If the precise function being called is known
+ * FUNC is its FUNCTION_DECL; otherwise, FUNC is 0. */
+#define	FUNCTION_VALUE(VALTYPE, FUNC) gen_rtx_REG(TYPE_MODE(VALTYPE), zip_R1)
+
+/* Define how to find the value returned by a library function assuming the
+ * value has mode MODE.
+ */
+#define	LIBCALL_VALUE(MODE)	gen_rtx_REG(MODE, zip_R1)
+
+
+/* STACK AND CALLING */
+
+
+/* Define this macro as a C expression that is nonzero for registers that are
+ * used by the epilogue or the return pattern.  The stack and frame pointer
+ * registers are already assumed to be used as needed.
+ */
+#define	EPILOGUE_USES(R)	(R == RETURN_ADDRESS_REGNUM)
+
+
+/* Normal alignment required for function parameters on the stack, in bits.  All
+ * stack parameters receive at leaswt this much alignment regardless of data
+ * type. */
+#define	PARM_BOUNDARY	32
+
+/* Alignment of field after 'int : 0' in a structure. */
+#define	EMPTY_FIELD_BOUNDARY	32
+
+/* No data type wants to be aligned rounder than this. */
+#define	BIGGEST_ALIGNMENT	32
+
+/* The best alignment to use in cases where we have a choice. */
+#define	FASTEST_ALIGNMENT	32
+
+/* Every structures size must be a multiple of 32-bits. */
+#define	STRUCTURE_SIZE_BOUNDARY	32
+
+/* PCC_BITFIELD_TYPE_MATTERS -- define this if you wish to imitate the the way 
+ * other C compilers handle alignment of bit-fields and the structures that
+ * contain them.  
+ *
+ * The behavior is that the type written for a named bit-field (int, short, or
+ * other integer type) imposes an alignment for the entire structure, as if the
+ * structure really did contain an ordinary field of that type.  In addition,
+ * the bit-field is placed within the structure so that it would fit within
+ * such a field, not crossing a boundary for it.
+ * 
+ * Thus, no most machines, a named bit-field whose type is written as int would
+ * not cross a four-byte boundary, and would force four-byte alignment for the
+ * whole structure.  (The alignment used may not be four bytes; it is controlled
+ * by other alignment parameters.)
+ * 
+ * An unnamed bit-field will not affect the alignment of the containing
+ * structure.
+ *
+ * If thhe macro is defined, its definition should be a C expression, a non
+ * zero value for the expression enables this behavior.
+ * Look at the fundamental type that is used for a bit-field and use that to
+ * impose alignment on the enclosing structure.  struct s{int a:8}; should
+ * have the same alignment as 'int', not 'char'.
+ */
+#undef	PCC_BITFIELD_TYPE_MATTERS
+#define	PCC_BITFIELD_TYPE_MATTERS	0
+
+/* MAX_FIXED_MODE_SIZE -- An integer expression for the size in bits of the
+ * largest integer machine mode that should actually be used.  All integer
+ * machine modes of this size and smaller can be used for structures and unions
+ * with the appropriate sizes.  If this macro is undefined,
+ * GET_MODE_BITSIZE(DImode) is assumed.
+ *
+ * ZipCPU -- The default looks good enough for us.
+ */
+
+/* Make strings word-aligned so strcpy from constants will be faster. */
+#define	CONSTANT_ALIGNMENT(EXP, ALIGN)	(((TREE_CODE(EXP)==STRING_CST)	\
+	&& ((ALIGN) < FASTEST_ALIGNMENT)) ? FASTEST_ALIGNMENT : (ALIGN))
+
+/* Make arrays of chars word-aligned for the same reasons. */
+#define	DATA_ALIGNMENT(TYPE, ALIGN)	((TREE_CODE(TYPE) == ARRAY_TYPE) \
+	&& (TYPE_MODE(TREE_TYPE(TYPE)) == QImode)		\
+	&& ((ALIGN < FASTEST_ALIGNMENT) ? FASTEST_ALIGNMENT : (ALIGN)))
+
+/* Generate Code for Profiling
+ */
+#define	FUNCTION_PROFILER(FILE,LABELNO)		(abort(), 0)
+
+
+/* A C expression which is nonzero if register number NUM is suitable for use
+ * as an index register in operand addresses.
+ */
+#define	REGNO_OK_FOR_INDEX_P(NUM)	0
+
+
+/* A C compound statement with a conditional 'goto LABEL;' executed if X
+ * (an RTX) is a legitimate memory address on the target machine for a memory
+ * operand of mode MODE.
+ */
+/* 17.03 Controlling the Compilation Driver, 'gcc' */
+// DRIVER_SELF_SPECS
+// OPTION_DEFAULT_SPECS
+// CPP_SPEC
+// CPLUSPLUS_CPP_SPEC
+// CC1_SPEC
+// CC1PLUS_SPEC
+/* ASM_SPEC ... A C string constant that tells the GCC driver program options
+ * to pass to the assembler.  It can also specify how to translate options you
+ * give to GCC into options for GCC to pass to the assembler.  See the file
+ * 'sun3.h' for an example of this.
+ *
+ * Do not define thismacro if it does not need to do anything.
+ */
+// #undef	ASM_SPEC
+// ASM_FINAL_SPEC
+// ASM_NEEDS_DASH_FOR_PIPED_INPUT
+
+/* LINK_SPEC ... A C string constant that tells the GCC driver program options
+ * to pass to the linker.  It can also specify how to translate options you give
+ * to GCC into options for GCC to pass to the linker.
+ *
+ * Do not define this macro if it does not need to do anything.
+ */
+
+/* LIB_SPEC ... Another C string constant very much like LINK_SPEC.  The
+ * difference between the two is that LIB_SPEC is used at the end of the 
+ * command given to the linker.
+ *
+ * If this macro is not defined, a default is provided that loads the standard
+ * C library from the usual place.  See 'gcc.c'.
+ */
+#undef	LIB_SPEC
+// #define	LIB_SPEC	"%{!g:-lc} %{g:-lg} -lzip"
+#define	LIB_SPEC	""
+
+/* LIBGCC_SPEC ... Another C string constant that tells the GCC driver program
+ * hoow and when to place a reference to 'libgcc.a' into the linker command
+ * line.  This constant is placed both before and after the value of LIB_SPEC.
+ *
+ * If this macro is not defined, the GCC driver provides a default that passes
+ * the string '-lgcc' to the linker.
+ */
+#undef	LIBGCC_SPEC
+#define	LIBGCC_SPEC	""
+
+/* REAL_LIBGCC_SPEC ... By default, if ENABLE_SHARED_LIBGCC is defined, the
+ * LIBGCC_SPEC is not directly used by the driver program but is instead
+ * modified to refer to different versions of 'libgcc.a' depending on the 
+ * values of the command line flags '-static', '-shared', '-static-libgcc',
+ * and '-shared-libgcc'.  On targets where these modifications are
+ * inappropriate, define REAL_LIBGCC_SPEC instead.  REAL_LIBGCC_SPEC tells the
+ * driver how to place a reference to 'libgcc' on the link command line, but
+ * unlike LIBGCC_SPEC, it is used unmodified.
+ */
+#define	REAL_LIBGCC_SPEC	""
+
+// USE_LD_AS_NEEDED
+// LINK_EH_SPEC
+
+/* STARTFILE_SPEC ... Another C string constant used much like LINK_SPEC.  The
+ * difference between the two is that STARTFILE_SPEC is used at the very
+ * beginning of the command given to the linker.
+ *
+ * If this macro is not defined, a default is provided that loads the standard
+ * C startup file from the usual place.  See 'gcc.c'
+ */
+#undef	STARTFILE_SPEC
+#define	STARTFILE_SPEC	""
+
+/* ENDFILE_SPEC ... Another C string constant used much like LINK_SPEC.  The
+ * difference between the two is that ENDFILE_SPEC is used at the very end
+ * of the command given to the linker. 
+ *
+ * Do not define this macro if it does not do anything.
+ */
+// #undef	ENDFILE_SPEC
+// #define	ENDFILE_SPEC	""
+
+// THREAD_MODEL_SPEC
+// SYSROOT_SUFFIX_SPEC
+// SYSROOT_HEADERS_SUFFIX_SPEC
+// EXTRA_SPECS
+// LINK_LIBGCC_SPECIAL_1
+// LINK_GCC_C_SEQUENCE_SPEC
+// LINK_COMMAND_SPEC
+// TARGET_ALWAYS_STRIP_DOTDOT
+// MULTILIB_DEFAULTS
+// RELATIVE_PREFIX_NOT_LINKDIR
+// MD_EXEC_PREFIX
+// STANDARD_STARTFILE_PREFIX
+// STANDARD_STARTFILE_PREFIX_1
+// STANDARD_STARTFILE_PREFIX_2
+// MD_STARTFILE_PREFIX
+// MD_STARTFILE_PREFIX_1
+// INIT_ENVIRONMENT
+// LOCAL_INCLUDE_DIR
+#undef	LOCAL_INCLUDE_DIR
+
+// NATIVE_SYSTEM_HEADER_COMPONENT
+// INCLUDE_DEFAULTS
+
+/* 17.03 Run-time Target Specification */
+
+/* TARGET_CPU_CPP_BUILTINS() ... This function-like macro expands to a block of
+ * code that defines built-in preprocessor macros and assertions for the target
+ * CPU, using the functions builtin_define, builtin_define_std, and
+ * builtin_assert.  When the front end calls this macro it provides a trailing
+ * semicolon, and since it has finished command line option proccessing your
+ * code can use those results freely.
+ *
+ * ZipCPU --- We should probably capture in this macro what capabilities the
+ * command line parameters we've been given indicate that our CPU has.  That
+ * way, code can be adjusted depending upon the CPU's capabilities.
+ */
+#define	TARGET_CPU_CPP_BUILTINS()			\
+	{ builtin_define("__ZIPCPU__");			\
+	if (ZIP_FPU) builtin_define("__ZIPFPU__");	\
+	if (ZIP_ATOMIC) builtin_define("__ZIPATOMIC__");	\
+	}
+	// If (zip_param_has_fpu)  builtin_define("__ZIPFPU__");
+	// If (zip_param_has_div)  builtin_define("__ZIPDIV__");
+	// If (zip_param_has_mpy)  builtin_define("__ZIPMPY__");
+	// If (zip_param_has_lock) builtin_define("__ZIPLOCK__");
+	// If (zip_param_supervisor) builtin_define("__ZIPUREGS__");
+	// If (we support int64s) builtin_define("___int64_t_defined");
+
+/* TARGET_OS_CPP_BUILTINS() ... Similarly to TARGET_CPU_CPP_BUILTINS but this
+ * macro is optional and is used for the target operating system instead.
+ */
+
+/* Option macros: (we need to define these eventually ... )
+ *
+ *	TARGET_HANDLE_OPTION
+ *	TARGET_HANDLE_C_OPTION
+ *	TARGET_OBJ_CONSTRUCT_STRING_OBJECT
+ *	TARGET_OBJ_DECLARE_UNRESOLVED_CLASS_REFERENCE
+ *	TARGET_OBJ_DECLARE_CLASS_DEFINITION
+ *	TARGET_STRING_OBJECT_REF_TYPE_P
+ *	TARGET_CHECK_STRING_OBJECT_FORMAT_ARG
+ *	TARGET_OVERRIDE_OPTIONS_AFTER_CHANGE(VOID)
+ *	C_COMMON_OVERRIDE_OTPTIONS
+ *	TARGET_OPTION_OPTIMIZATION_TABLE
+ *	TARGET_OPTION_INIT_STRUCT
+ *	TARGET_OPTION_DEFAULT_PARAMS
+ */
+
+/* SWITCHABLE_TARGET
+ *
+ * Zip CPU doesn't need this, so it defaults to zero.  No need to change it
+ * here.
+ */
+
+/* TARGET_FLOAT_EXCEPTIONS_ROUNDING_SUPPORTED_P(VOID) ... Returns true if the
+ * target supports IEEE 754 floating-point exceptions and rounding modes, false
+ * otherwise.  This is intended to relate to the float and double types, but not
+ * necessarily "long double".  By default, returns true if the adddf3
+ * instruction pattern is available and false otherwise, on the assumption that
+ * hardware floating point supports exceptions and rounding modes but software
+ * floating point does not.
+ *
+ * ZipCPU floating point is barely going to be functional, I doubt it will
+ * support all of these bells and whistles when full functionality is even 
+ * achieved.  Therefore, we won't support these modes.  However, we can't just
+ * set this to zero, so let's come back to this.
+ */
+// #warning "Wrong answer encoded to date"
+// #undef	TARGET_FLOAT_EXCEPTIONS_ROUNDING_SUPPORTED_P
+// #define	TARGET_FLOAT_EXCEPTIONS_ROUNDING_SUPPORTED_P(X)	0
+
+/* 17.04 Defining data structures for per-function information */
+
+/* INIT_EXPANDERS ... Macro called to initialize any target specific
+ * information.  This macro is called once per function, before generation of
+ * any RTL has begun.  The intention is to allow the initialization of the 
+ * function pointer init_machine_status.
+ */
+// #warning "I may need to define this to handle function return addresses ..."
+
+/* 17.05 Storage Layout */
+
+/* Storage Layout */
+#define	BITS_BIG_ENDIAN		0	// MSB has highest number
+#define	BYTES_BIG_ENDIAN	1	// 1 if MSB is lowest number
+#define	WORDS_BIG_ENDIAN	1	// 1 if MSW is lowest number
+#define	FLOAT_WORDS_BIG_ENDIAN	1
+#define	BITS_PER_WORD		32
+// #define	MAX_BITS_PER_WORD	// defaults to BITS_PER_WORD
+#define	UNITS_PER_WORD		1	// Storage units in a word, pwr of 2:1-8
+#define	MIN_UNITS_PER_WORD	1	// Default is UNITS_PER_WORD
+/* POINTER_SIZE ... Width of a pointer in bits.  You must specify a value no
+ * wider than the width of Pmode.  If it is not equal to the width of Pmode,
+ * you must define POINTERS_EXTEND_UNSIGNED. If you do not specify a value the
+ * default is BITS_PER_WORD.
+ *
+ * ZipCPU --- All of our pointers are 32-bits, the width of our address bus.
+ */
+#define	POINTER_SIZE		32	// Ptr width in bits
+/* POINTERS_EXTEND_UNSIGNED ... A C expression that determines how pointers
+ * should be extended from ptr_mode to either Pmode or word_mode.  It is greater
+ * than zero if pointers should be zero-extended, zero if they should be sign
+ * extended, and negative if some other conversion is needed.  In the last case,
+ * the extension is done by the target's ptr_extend instruction.
+ *
+ * You need not define this macro if the ptr_mode, Pmode, and word_mode are all
+ * the same width.
+ *
+ * ZipCPU --- While we shouldn't need this, QImode and HImode have the same
+ * number of bits as SImode.  Therefore, one might wish to convert between the
+ * two.  Hence, we specify how we would do that here.
+ */
+#define	POINTERS_EXTEND_UNSIGNED	0
+
+/* PROMOTE_MODE(m,unsignedp,type) ... A macro to update m and unsignedp when an
+ * object whose type is type and which has he specified mode and signedness is
+ * to be stored in a register.  This macro is only called when type is a scalar
+ * type.
+ *
+ * On most RISC machines, which only have operations that operate on a full
+ * register, define this macro to set m to word_mode if m is an integer mode
+ * narrower than BITS_PER_WORD.  In most cases, only integer modes should be
+ * widened because wider precision floating-point operations are usually more
+ * expensive than their narrower counterparts.
+ *
+ * For most machines, the macro definition does not change unsigndep.  However,
+ * some machines, have instructions that preferentially handle either signed or
+ * unsigned quantities of certain modes.  For example, on the DEC Alpha, 32-bit
+ * loads from memory and 32-bit add instructions sign-extend the result to 
+ * 64-bits. On such machines, set unsignedp according to which kind of extension
+ * is more efficient.
+ *
+ * Do not define this macro if it would never modify m.
+ *
+ * ZipCPU --- We need to always (if possible) promote everything to SImode where
+ * we can handle things.  HImode and QImode just don't make sense on this CPU.
+ */
+#define	PROMOTE_MODE(M,U,T)	if ((GET_MODE_CLASS(M)==MODE_INT)&&(GET_MODE_SIZE(M)<2)) (M)=SImode;
+
+// TARGET_PROMOTE_FUNCTION_MODE
+/* PARM_BOUNDARY ... Normal alignment required for function parameters on the
+ * stack, in bits.  All stack parameters receive at least this much alignment
+ * regardless of data type.  On most machines, this is the same as the size of
+ * an integer.
+ */
+#define	PARM_BOUNDARY	32
+
+/* STACK_BOUNDARY ... Define this macro to the minimum alignment enforced by
+ * hardware for the stack pointer on this machine.  The definition is a C 
+ * expression for the desired alignment (measured in bits).  This value is used
+ * as a default if PREFERRED_STACK_BOUNDARY is not defined.  On most machines,
+ * this should be the same as PARM_BOUNDARY.
+ */
+#define	STACK_BOUNDARY	PARM_BOUNDARY
+
+/* PREFERRED_STACK_BOUNDARY ... Define this ... */
+
+/* INCOMING_STACK_BOUNDARY
+ */
+
+/* FUNCTION_BOUNDARY ... Alignment required for a function entry point, in bits.
+ */
+#define	FUNCTION_BOUNDARY	32
+
+/* BIGGEST_ALIGNMENT ... Biggest alignment that any data type can require on
+ * this machine, in bits.  Note that this is not the biggest alignment that is
+ * supported, just the biggest alignment that, when violated, may cause a fault.
+ */
+#define BIGGEST_ALIGNMENT	32
+
+/* MINIMUM_ATOMIC_ALIGNMENT ... If defined, the smallest alignment, that can be
+ * given to an object that can be referenced in one operation, without
+ * disturbing any nearby object.  Normally, this is BITS_PER_UNIT, but may be
+ * larger on machines that don't have byte or halfword store operations.
+ */
+#define	MINIMUM_ATOMIC_ALIGNMENT	BITS_PER_UNIT
+
+/* STRICT_ALIGNMENT ... Set this nonzero if move instructions will actually
+ * fail to work when given unaligned data.  If instructions will merely go
+ * slower in that case, define this macro as 0.
+ */
+#define	STRICT_ALIGNMENT	1
+
+/* MAX_FIXED_MODE_SIZE ... An integer expression for the size in bits of the
+ * largest integer machine mode that should actually be used.  All integer
+ * machine modes of this size or smaller can be used for structures and unions
+ * with the appropriate sizes.  If this macro is undefined,
+ * GET_MODE_BITSIZE(DImode) is assumed.
+ *
+ * ZipCPU ... Get_MOD_BITSIZE(DImode) will be 64, and this is really not the
+ * size on bits of the largest integer machine mode.  However, that's the case
+ * with most DI implementations: A long is two words, spliced together.  We'd
+ * like to support that eventually, but we need to get there.  Hence, let's use
+ * compile time flag (ZIP_HAS_DI) that we can enable when we're ready.
+ */
+#if (ZIP_HAS_DI != 0)
+#define	MAX_FIXED_MODE_SIZE	64
+#else
+#define	MAX_FIXED_MODE_SIZE	32
+#endif
+
+
+/* 17.06 Layout of Source Language Data Types */
+
+#undef	CHAR_TYPE_SIZE
+#undef	SHORT_TYPE_SIZE
+#undef	INT_TYPE_SIZE
+#undef	LONG_TYPE_SIZE
+#undef	LONG_LONG_TYPE_SIZE
+//
+#define	CHAR_TYPE_SIZE	32
+#define	SHORT_TYPE_SIZE	32
+#define	INT_TYPE_SIZE	32
+#define	LONG_TYPE_SIZE	32
+#define	LONG_LONG_TYPE_SIZE	64
+// BOOL_TYPE_SIZE defaults to CHAR_TYPE_SIZE
+#undef	FLOAT_TYPE_SIZE
+#undef	DOUBLE_TYPE_SIZE
+#undef	LONG_DOUBLE_TYPE_SIZE
+#define	FLOAT_TYPE_SIZE		32
+#define	DOUBLE_TYPE_SIZE	FLOAT_TYPE_SIZE	// Zip CPU doesn't support dbls
+#define	LONG_DOUBLE_TYPE_SIZE	64	// This'll need to be done via emulation
+// SHORT_FRAC_TYPE_SIZE
+// LONG_FFRACT_TYPE_SIZE
+// LONG_LONG_FRACT_TIME_SIZE
+#undef	SHORT_ACCUM_TYPE_SIZE
+#undef	ACCUM_TYPE_SIZE
+#undef	LONG_ACCUM_TYPE_SIZE
+#define	SHORT_ACCUM_TYPE_SIZE	SHORT_TYPE_SIZE
+#define	ACCUM_TYPE_SIZE		INT_TYPE_SIZE
+#define	LONG_ACCUM_TYPE_SIZE	LONG_TYPE_SIZE
+
+/* LIBGCC2_GNU_PREFIX ... This macro corresponds to the TARGET_GNU_PREFIX target
+ * hook and should be defined if that hook is overriden to be true.  It causes
+ * function names in libgcc to be changed to use a __gnu_ prefix for their name
+ * rather than the default __.  A port which uses this macro should also arrange
+ * to use t-gnu-prefix in the libgcc config.host.
+ *
+ * ZipCPU -- I see no reason to define and therefore change this behavior.
+ */
+
+/* TARGET_FLT_EVAL_METHOD ... A C expression for the value for FLT_EVAL_METHOD
+ * in float.h,, assuming, if applicable, that the floating-point control word
+ * is in its default state.  If you do not define this macro the value of
+ * FLT_EVAL_METHOD will be zero.
+ * 
+ * ZipCPU --- ???
+ */
+
+/* WIDEST_HARDWARE_FP_SIZE ... A C expression for the size in bits of the widest
+ * floating-point format supported by the hardware.  If you define this macro,
+ * you must specify a value less than or equal to the value of LONG_DOUBLE_...
+ * If you do not define this macro, the value of LONG_DOUBLE_TYPE_SIZE is the
+ * default.
+ *
+ * ZipCPU supports 32-bit IEEE floats--IF THE SUPPORT IS COMPILED IN!  This
+ * really needs to be determined, then, based upon a compile time parameter
+ * where the one compiling the code states whether or not the H/W even has
+ * floating point support.
+ *
+ * For now, we'll assume it does--but once we implement GCC parameters, we'll
+ * need to change this.
+ */
+#undef	WIDEST_HARDWARE_FP_SIZE
+// #warning "Definition needs to change if no FPU present"
+#define	WIDEST_HARDWARE_FP_SIZE	FLOAT_TYPE_SIZE
+
+/* DEFAULT_SIGNED_CHAR ... An expression whose value is 1 or 0, according to 
+ * whether the type char should be signed or unsigned by default.  The user
+ * can always override this default with the options -fsigned-char and
+ * -funsigned-char.
+ *
+ * ZipCPU--let's go with the default behavior.
+ */
+#define	DEFAULT_SIGNED_CHAR	1
+
+/* TARGET_DEFAULT_SHORT_ENUMS(VOID) ... This target hook should return true if
+ * the compiler should give an enum type only as many bytes as it takes to 
+ * represent the range of possible values of that type.  It should return
+ * false if all enum types should be allocated like int.
+ *
+ * The default is to return false.  This is what the ZipCPU needs, so we won't
+ * override it.
+ */
+
+/* SIZE_TYPE ... A C expression for a string describing the name of the data
+ * type to use for size values.  The typedef name size_t is defined using the
+ * contents of the string.
+ * 
+ * If you don't define this macro, the default is "long unsigned int".  Since
+ * on the ZipCPU this is a 32-bit number, and all ZipCPU values are 32-bits,
+ * the default seems perfect for us.
+ */
+#define	SIZE_TYPE	"unsigned int"
+
+/* SIZETYPE ... GCC defines internal types () for expressions dealing with size.
+ * This macro is a C expression for a string describing the name of the data 
+ * type from which the precision of sizetype is extracted.  The string has the 
+ * same restrictions as SIZE_TYPE string.  If you don't define this macro, the
+ * default is SIZE_TYPE --- which seems good enough for us.
+ */
+
+/* PTRDIFF_TYPE ... A C expression for a string describing the name of the data
+ * type to use fo rthe result of subtracting two pointers.  The typedef name
+ * ptrdiff_t is defined using the contents of the string.  See SIZE_TYPE for
+ * more information.
+ *
+ * The default is "long int" which for the ZipCPU is 32-bits---still good enough
+ * for us.
+ */
+#define	PTRDIFF_TYPE	"int"
+
+/* WCHAR_TYPE ... A C expression for a string describing the name of the data
+ * type to use for wide characters.  The typedef name wchar_t is defined using
+ * the contents of  the string.  If you don't define this macro, the default is
+ * 'int'--good enough for ZipCPU.
+ */
+
+/* WCHAR_TYPE_SIZE ... A C expression for the size in bits of the data type for
+ * wide characters.  This is used in cpp, which cannot make use of WCHAR_TYPE.
+ */
+#undef	WCHAR_TYPE_SIZE
+#define	WCHAR_TYPE_SIZE	32
+
+/* WINT_TYPE ... A C expression for a string describing the name of the data
+ * type to use for wide characters passed to printf and returned from getwc.
+ * The typedef name wint_t is defined using the contents of the string.  See
+ *
+ * ZipCPU -- If you don't define this macro, the default is "unsigned int"--also
+ * best for us again.
+ */
+
+/* INTMAX_TYPE ... A C expression for a string describing the name of the 
+ * data type that can represent any value of any standard or extended signed
+ * integer type.  The typedef name intmax_t is defined using the contents of
+ * the string.
+ *
+ * If you don't define this macro, the default is the first of "int", "long int"
+ * or "long long int" that has as much precision as "long long int".
+ */
+
+/* UINTMAX_TYPE ... same as INTMAX_TYPE, but for unsigned 
+ */
+
+#undef	SIG_ATOMIC_TYPE
+#if (ZIP_ATOMIC != 0)
+#define	SIG_ATOMIC_TYPE	"int"
+#else
+#define	SIG_ATOMIC_TYPE	NULL	// We have no atomic types, but registers
+#endif
+#undef	INT8_TYPE
+#define	INT8_TYPE		NULL	// We have no 8-bit integer type
+#undef	INT16_TYPE
+#define	INT16_TYPE		NULL
+#undef	INT32_TYPE
+#define	INT32_TYPE		"int"
+#undef	UINT8_TYPE
+#define	UINT8_TYPE		NULL
+#undef	UINT16_TYPE
+#define	UINT16_TYPE		NULL
+#undef	UINT32_TYPE
+#define	UINT32_TYPE		"unsigned int"
+#undef	INT_LEAST8_TYPE	
+#define	INT_LEAST8_TYPE		"int"
+#undef	INT_LEAST16_TYPE
+#define	INT_LEAST16_TYPE	"int"
+#undef	INT_LEAST32_TYPE
+#define	INT_LEAST32_TYPE	"int"
+#undef	UINT_LEAST8_TYPE
+#define	UINT_LEAST8_TYPE	"unsigned int"
+#undef	UINT_LEAST16_TYPE
+#define	UINT_LEAST16_TYPE	"unsigned int"
+#undef	UINT_LEAST32_TYPE
+#define	UINT_LEAST32_TYPE	"unsigned int"
+#undef	INT_FAST8_TYPE
+#define	INT_FAST8_TYPE		"int"
+#undef	INT_FAST16_TYPE
+#define	INT_FAST16_TYPE		"int"
+#undef	INT_FAST32_TYPE
+#define	INT_FAST32_TYPE		"int"
+#undef	UINT_FAST8_TYPE
+#define	UINT_FAST8_TYPE		"unsigned int"
+#undef	UINT_FAST16_TYPE
+#define	UINT_FAST16_TYPE	"unsigned int"
+#undef	UINT_FAST32_TYPE
+#define	UINT_FAST32_TYPE	"unsigned int"
+#undef	INTPTR_TYPE
+#define	INTPTR_TYPE		"unsigned int"
+#undef	UINTPTR_TYPE
+#define	UINTPTR_TYPE		"unsigned int"
+
+#undef	INT64_TYPE
+#undef	UINT64_TYPE
+#undef	INT_LEAST64_TYPE
+#undef	UINT_LEAST64_TYPE
+#undef	INT_FAST64_TYPE
+#undef	UINT_FAST64_TYPE
+
+#if (ZIP_HAS_DI != 0)
+#define	INT64_TYPE		"long int"
+#define	UINT64_TYPE		"long unsigned int"
+#define	INT_LEAST64_TYPE	"long int"
+#define	UINT_LEAST64_TYPE	"long unsigned int"
+#define	INT_FAST64_TYPE		"long int"
+#define	UINT_FAST64_TYPE	"long unsigned int"
+#else
+#define	INT64_TYPE		NULL
+#define	UINT64_TYPE		NULL
+#define	INT_LEAST64_TYPE	NULL
+#define	UINT_LEAST64_TYPE	NULL
+#define	INT_FAST64_TYPE		NULL
+#define	UINT_FAST64_TYPE	NULL
+#endif
+
+#define	TARGET_PTRMEMFUNC_VBI_LOCATION	ptrmemfunc_vbit_in_pfn
+
+
+/* 17.07 Register Usage / Register definitions */
+
+/* FIRST_PSEUDO_REGISTER ... Number of hardware registers known to the compiler.
+ * They receive numbers 0 through FIRST_PSEUDO_REGISTER-1; thus the first
+ * pseudo register's numbrer really is assigned the number
+ * FIRST_PSEUDO_REGISTER.
+ *
+ * ZipCPU---There are 16 registers in the ZipCPU, numbered 0-15 with the CC
+ * and PC register being numbered 14 and 15 respectively.  Therefore, the 
+ * compiler can take register number 16 and above and do whatever it wants
+ * with it.
+ */
+#ifdef	DEFINE_USER_REGS
+#  define	FIRST_PSEUDO_REGISTER	32
+#else
+#  ifdef	zip_FP_PSEUDO
+#    define	FIRST_PSEUDO_REGISTER	(zip_FP_PSEUDO+1)
+#  else
+#    define	FIRST_PSEUDO_REGISTER	16
+#  endif
+#endif
+
+/* FIXED_REGISTERS ... An initializer that says which registers are used for
+ * fixed purposes all throughout the compiled code and are therefore not
+ * available for general allocation.  These would include the stack pointer, the
+ * frame pointer (except on machines where that can be used as a general
+ * register when no frame pointer is needed), the program counter on machines
+ * where that is considered one of the addressable registers, and any other
+ * numbered register with a standard use.
+ *
+ * This information is expressed as a sequence of numbers, separated by commas,
+ * and surrounded by braces.  The nth number is 1 if register n is fixed, 0
+ * otherwise.
+ *
+ * For the Zip CPU, we have three fixed registers that are not available for
+ * general allocation:
+ *
+ * 	SP	The stack pointer
+ * 	CC	The condition codes and CPU state register
+ *	PC	The program counter
+ *
+ * Other registers, such as FP (the frame pointer) or GBL (the global offset
+ * table pointer) are registers that we hope will not be so fixed.
+ */
+#ifdef	zip_FP_PSEUDO
+#  define	FIXED_REGISTERS		{ 0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,1 }
+#else
+#  define	FIXED_REGISTERS		{ 0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1 }
+#endif
+
+/* CALL_USED_REGISTERS ... like FIXED_REGISTERS but has 1 for each register
+ * that is clobbered (in general) by function calls as well as for fixed
+ * registers.  This macro therefore identifies the registers that are not
+ * available for general allocation of values that must live across function
+ * calls.
+ * 
+ * If a register has 0 in CALL_USED_REGISTERS, the compiler automatically saves
+ * it on function entry and restores it on function exit, if the register is
+ * used within the function.
+ *
+ * On the Zip CPU, we must save R0 (the return address), and (let's pick) any
+ * register above R5.
+ */
+#ifdef	zip_FP_PSEUDO
+#  define	CALL_USED_REGISTERS	{ 0,1,1,1,1,0,0,0,0,0,0,0,0,1,1,1,1 }
+#else
+#  define	CALL_USED_REGISTERS	{ 0,1,1,1,1,0,0,0,0,0,0,0,0,1,1,1 }
+#endif
+
+/* CALL_REALLY_USED_REGISTERS ...  optional macro that, if not defined, defaults
+ * to the value of CALL_USED_REGISTERS.
+ */
+
+/* HARD_REGNO_CALL_PART_CLOBBERED(REGNO,MODE) ... A C expression that is nonzero
+ * if it is not permissible to store a value of mode MODE in hard register REGNO
+ * across a call without some part of it being clobbbered.  For most machines,
+ * this macro need not be defined.  It is only required for machines that do
+ * not preserve the entire contents of a register across a call.
+ *
+ * In the Zip CPU, we clobber R0 with our return address during a call, so let's
+ * make sure this gets included here.
+ */
+#define	HARD_REGNO_CALL_PART_CLOBBERED(REGNO,MODE)	(REGNO==0)
+
+/* TARGET_CONDITIONAL_REGISTER_USAGE(VOID) ... This hook may conditionally 
+ * modify five variables fixed_regs, call_used_regs, global_regs, reg_names, and
+ * reg_class_contents, to take into account any dependence of these register
+ * sets on target flags.  The first three of these are of type char[]
+ * (interpreted as Boolean vectors).  global_regs is a const char *[] and
+ * reg_class_contents is a HARD_REG_SET.  Before the macro is called,
+ * fixed_regs, call_used_regs, reg_class_contents, and reg_names have been
+ * initialized from FIXED_REGISTERS, CALL_USED_REGISTERS, REG_CLASS_CONTENTS,
+ * and REGISTER_NAMES, respectively.  global_regs has been cleared, and any
+ * -ffixed-reg, -fcall-used-reg, and -fcall-saved-reg command options have been
+ * applied.
+ *
+ * ZipCPU -- I may need to return and define this depending upon how FP and
+ * GBL register allocation go.  But for now, we'll leave this at its default
+ * value.
+ */
+// #warning "Revisit me after FP and GBL allocation"
+
+/* INCOMING_REGNO(out) ... Define this macro if the target machine has register
+ * windows. ...
+ *
+ * Zip CPU has no register windows.
+ */
+
+/* OUTGOING_REGNO ... same thing.
+ */
+
+/* LOCAL_REGNO ... same thing.
+ */
+
+/* PC_REGNUM ... If the program counter has a register number, define this as
+ * that register number.  Otherwise do not define it.
+ */
+#define	PC_REGNUM	zip_PC
+
+
+/* REG_ALLOC_ORDER ... If defined, an initializer for a vector of integers, 
+ * containing the number of hard registers in the order in which GCC should
+ * prefer to use them (from most preferred to least.
+ *
+ * If this macro is not defined, registers are used lowest numbered first (all
+ * else being equal).
+ *
+ * Since the default is the ZipCPU desired case, we won't define this here.
+ */
+
+/* ADJUST_REG_ALLOC_ORDER ... on most machines it is not necessary to define
+ * this macro, so we won't either.
+ */
+
+/* HONOR_REG_ALLOC_ORDER ... 
+ */
+
+/* HONOR_REG_ALLOC_ORDER ... on most machines it is not necessary to define
+ * this macro, so we won't either.
+ */
+
+/* HARD_REGNO_NREGS(REGNO, MODE) ... A C expression for the number of
+ * consecutive hard registers, starting at register number REGNO, required to
+ * hold a value of mode MODE.
+ *
+ * On a machine where all registers are exactly one word, a suitable definition
+ * is given of ((GET_MODE_SIZE(MODE)+UNITS_PER_WORD-1)/UNITS_PER_WORD.
+ *
+ * On ZipCPU, we might do
+ *	((((MODE)==DImode)||((MODE)==DFmode))?2:1)
+ * but I think the default (above) code should work as well.  Hence, let's stick
+ * with the default, lest someone try to create larger modes (TImode, OImode,
+ * XImode) and expect us to follow them properly some how.
+ *
+ * Okay, now in hind sight, we know that the default doesn't work for our
+ * architecture, since GET_MODE_SIZE(SImode)=4, not 1.  Thus, let's rearrange
+ * this expression to work in bits rather than in bytes and we'll know more
+ * of what we are doing.
+ */
+#undef	HARD_REGNO_NREGS
+#define	HARD_REGNO_NREGS(REGNO, MODE)	((GET_MODE_SIZE(MODE)+UNITS_PER_WORD-1)\
+		/ (UNITS_PER_WORD))
+
+/* HARD_REGNO_NREGS_HAS_PADDING(REGNO,MODE) ... A C expression that is nonzero
+ * if a value of mode MODE, stored in memory, ends with padding that causes it
+ * to take up more space than in registers starting at register number REGNO
+ * (as determined by multiplying GCC's notion of the size of the register when
+ * containing this mode by the number of registers returned by HARD_REGNO_NREGS)
+ * By default this is zero.
+ *
+ * Zip CPU --- The default looks good enough to me.
+ */
+
+/* HARD_REGNO_NREGS_WITH_PADDING(REGNO, MODE)
+ *
+ * ZipCPU ---
+ */
+
+/* REGMODE_NATURAL_SIZE(MODE) -- Define this macro if the natural size of 
+ * registers that hold values of mode mode is not the word size.  It is a C
+ * expression that should give the natural size in bytes for the specified mode.
+ * It is used by the register allocator to try to optimize its results.
+ *
+ * ZipCPU ---
+ */
+// #define	REGMODE_NATURAL_SIZE(MODE)	(((MODE)==DImode)?2:1)
+
+/* HARD_REGNO_MODE_OK ... A C expression that is nonzero if it is permissible
+ * to store a value of mode MODE in a hard register number REGNO (or in several
+ * registers starting with that one).  For a machine where all registers are
+ * equivalent, a suitable definition is '1'.  You need not include code to check
+ * for the numbers of fixed registers, because the allocation mechanism
+ * considered them to be always occupied.
+ *
+ * ZipCPU --- As long as you are already avoiding the fixed registers, the
+ * suitable default definition mentioned above should be sufficient.
+ */
+#undef	HARD_REGNO_MODE_OK
+#define	HARD_REGNO_MODE_OK(R,M)	(R<zip_CC)
+
+/* HARD_REGNO_RENAME_OK(FROM,TO) ... A C expression that is nonzero if it is
+ * okay to rename a hard register FROM to another hard register TO.  One common
+ * use of this macro is to prevernt renaming of a register to another register
+ * that is not saved by a prologue in an interrupt handler.  The default is
+ * always nonzero.
+ *
+ * ZipCPU --- The default looks good enough to us.
+ */
+#undef	HARD_REGNO_RENAME_OK
+#define	HARD_REGNO_RENAME_OK(FROM,TO)	((is_ZIP_GENERAL_REG(FROM))&&(is_ZIP_GENERAL_REG(TO)))
+
+
+/* MODES_TIABLE_P(M1, M2) ... A C expression that is nonzero if a value of mode
+ * M1 is accessible in mode M2 without copying.  
+ *
+ * ZipCPU --- well, that's true for us (although we support scant few modes) ...
+ * so lets' set to one.
+ */
+#define	MODES_TIEABLE_P(M1,M2)	1
+
+/* TARGET_HARD_REGNO_SCRATCH_OK(REGNO)
+ * This target hook should return true if it is OK to use a hard register
+ * REGNO has a scratch register in peephole2.  One common use of this macro is
+ * to prevent using of a register that is not saved by a prologue in an 
+ * interrupt handler.  The default version of this hook always returns true.
+ *
+ * ZipCPU --- the default works for us as well.  If you are in an interrupt
+ * context, you have an entirely new set of registers (the supervisor set), so
+ * this is a non-issue.
+ */
+ 
+/* AVOID_CCMODE_COPIES ... define this macro if the compiler should avoid
+ * copies to/from CCmode register(s).  You should only define this macro if
+ * support for copying to/from CCmode is incomplete.
+ *
+ * ZipCPU --- CCmode register copies work like any other, so we'll keep with the
+ * default definition.
+ */
+
+/* STACK_REGS ... Define this if the machine has any stack-like registers.
+ *
+ * Zip CPU has no stack-like registers, as their definition is different from
+ * the ZipCPU stack pointer register.
+ */
+
+#define	ZIP_REG_BYTE_SIZE	1
+
+/* 17.08 Register Classes */
+
+/* enum reg_class ... An enumerate type that must be defined with all the 
+ * register class names as enumerated values.  NO_REGS must be first.  ALL_REGS
+ * must be the last register class, followed by one more enumerated value,
+ * LIM_REG_CLASSES, which is not a register class but rather tells how many
+ * classes there are.
+ *
+ * ZipCPU --- We'll defined register 0-13 as general registers, 14-15 in
+ * all_regs, and go from there.
+ */
+enum	reg_class {
+	NO_REGS, GENERAL_REGS,
+#ifdef	DEFINE_USER_REGS
+	USER_REGS,
+#endif
+	ALL_REGS, LIM_REG_CLASSES
+};
+
+/* N_REG_CLASSES ... the number of distinct register classes, defined as follows
+ */
+#define	N_REG_CLASSES	(int)LIM_REG_CLASSES
+
+/* REG_CLASS_NAMES ... An initializer containing the names of the register
+ * classes as C string constants.  These names are used in writing some of the
+ * debugging dumps.
+ */
+#define	REG_CLASS_NAMES { "NO_REGS", "GENERAL_REGS", "ALL_REGS" }
+
+/* REG_CLASS_CONTENTS ... An initializer containing the contents of the register
+ * classes, as integerss which are bit masks.  The nth integer specifies the
+ * contents of class n.  That way the integer mask is interpreted as that
+ * register r is in the class if (mask&(1<<r)) is 1.
+ *
+ * When the machine has more than 32 registers ... that's not us.
+ *
+ * ZipCPU --- This is straight forward, three register classes, etc.
+ */
+#ifdef	zip_FP_PSEUDO
+#define	REG_CLASS_CONTENTS { { 0x00000}, {0x13fff}, {0x1ffff} }
+#else
+#define	REG_CLASS_CONTENTS { { 0x00000}, {0x03fff}, {0x0ffff} }
+#endif
+
+#ifdef	DEFINE_USER_REGS
+#define	REG_CLASS_NAMES { "NO_REGS", "GENERAL_REGS", "USER_REGS", "ALL_REGS" }
+#define	REG_CLASS_CONTENTS { { 0x00000},{0x03fff},{0x0ffff0000},{0x0ffffffff} }
+#define	FIXED_REGISTERS		{ 0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,  1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 }
+#define	CALL_USED_REGISTERS	{ 0,1,1,1,1,0,0,0,0,0,0,0,0,1,1,1,  1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1 }
+#endif
+
+/* REGNO_REG_CLASS ... A C expression whose value is a register class
+ * containing hard register REGNO.  In general there is more than one such
+ * class;  Choose a class which is minimal, meaning that no smaller class also
+ * contains the register.
+ */
+#undef	REGNO_REG_CLASS
+#ifdef	zip_FP_PSEUDO
+#define	REGNO_REG_CLASS(R)	(is_ZIP_REG(R)?((((R)<=13)||((R)==zip_FP_PSEUDO))?GENERAL_REGS:ALL_REGS):NO_REGS)
+#else
+#define	REGNO_REG_CLASS(R)	(is_ZIP_REG(R)?((R<=13)?GENERAL_REGS:ALL_REGS):NO_REGS)
+#endif
+
+/* BASE_REG_CLASS ... A macro whose definition is the name of the class to which
+ * a valid base register must belong.  A base register is one used in an address
+ * which is the register value plus a displacement.
+ */
+#undef	BASE_REG_CLASS
+#define	BASE_REG_CLASS	GENERAL_REGS
+
+/* MODE_BASE_CLASS(MODE) ... This is a variation of the BASE_REG_CLASS macro
+ * which allows the selection of a bse register in a mode dependent manner.  If
+ * mode is VOIDmode then it should return the same value as BASE_REG_CLASS.
+ */
+#undef	MODE_BASE_CLASS
+#define	MODE_BASE_CLASS(MODE)	GENERAL_REGS
+
+/* MODE_BASE_REG_REG_CLASS(MODE) ... A C expression whose value is the register
+ * class to which a valid base register must belong in order to be used in a
+ * base plus index register address.  You should define this macro if base plus
+ * index addresses have different requirements than other base register uses.
+ *
+ * Zip CPU does not support the base plus index addressing mode, thus ...
+ */
+// #undef	MODE_BASE_REG_REG_CLASS
+// #define	MODE_BASE_REG_REG_CLASS(MODE)	NO_REGS
+
+/* INDEX_REG_CLASS ... A macro whose definition is the name of the class to
+ * which a valid index register must belong.  An index register is one used in
+ * an address where its value is either multiplied by a scale factor or added
+ * to another register (as well as added to a displacement).
+ *
+ * ZipCPU -- Has no index registers.
+ */
+#undef	INDEX_REG_CLASS
+#define	INDEX_REG_CLASS	NO_REGS
+
+/* REGNO_OK_FOR_BASE_P(NUM) ... A C expression which is nonzero if register
+ * number num is suitable for use as a base register in operand addresses.
+ */
+#undef	REGNO_OK_FOR_BASE_P
+#ifdef	DEFINE_USER_REGS
+# define REGNO_OK_FOR_BASE_P(NUM)	((NUM != zip_CC)&&(NUM < 16))
+#else
+# define REGNO_OK_FOR_BASE_P(NUM)	(NUM != zip_CC)
+#endif
+
+/* REGNO_MODE_OK_FOR_BASE_P ... A C expressison that is just like
+ * REGNO_OK_FOR_BASE_P, except that that expression may examine the mode of the 
+ * memory reference in MODE.  You should define this macro if the mode of the
+ * memory reference affects whether a register may be used as a base register.
+ *
+ * ZipCPU --- the mode doesn't affect anything, so we don't define this.
+ */
+
+/* REGNO_MODE_OK_FOR_REG_BASE_P(NUM, MODE) ... base plus index operand
+ * addresses, accessing memory in mode mode.
+ *
+ * Use of this macro is deprecated.
+ */
+
+/* REGNO_MODE_CODE_OK_FOR_BASE_P(N,M,AS,OC,IC) ... A C expression which is
+ * nonzero if a register number N is suitable for use as a base register in 
+ * operand addresses, accessing memory in mode M in address space AS.  This is
+ * similar to REGNO_MODE_OK_FOR_BASE_P, except that the expression may examine
+ * the context in which the register appears in the memory reference.  
+ *
+ * ZipCPU---We aren't specific in how we use our registers.
+ */
+#define	REGNO_MODE_CODE_OK_FOR_BASE_P(N,M,AS,OC,IC) REGNO_OK_FOR_BASE_P(N)
+
+/* REGNO_OK_FOR_INDEX_P(REGNO) ... A C expression which is nonzero if register
+ * num is suitable for use as an index register in opernad addressess.  It may
+ * be either a suitable hard register or a pseudo register that has been
+ * allocated such as a hard register.
+ *
+ * ZipCPU has no index registers, therefore we declare this to be zero.
+ */
+#undef	REGNO_OK_FOR_INDEX_P
+#define	REGNO_OK_FOR_INDEX_P(REGNO)	0
+
+/* TARGET_PREFERRED_RENAME_CLASS(RCLASS) ... A target hook that places
+ * additional preference on the register class to use when it is necessary to 
+ * rename a register in class RCLASS to another class, or perhaps NO_REGS, if no
+ * preferred register class is found or hook preferred_rename_class is not
+ * implemented.  SOmething returning a more restrictive class makes better code.
+ * For example, on ARM, thumb-2 instructions using LO_REGS may be smaller than
+ * instructions using GENERIC_REGS.  By returning LO_REGS from
+ * preferred_rename_class, code size can be reduced.
+ */
+// #undef TARGET_PREFERRED_RENAME_CLASS
+// #define	TARGET_PREFERRED_RENAME_CLASS(RCLASS)	RCLASS
+
+/* TARGET_PREFERRED_RELOAD_CLASS(X,RC) ... A target hook that places additional
+ * restri tions on the register class to use when it is necessary to copy value
+ * X into a register in class RC.  The value is a register class; rehaps RC, or
+ * perhaps a smaller class.
+ *
+ * The default fversion of this hook always returns value of RC argument, which
+ * sounds quite appropriate for the ZipCPU.
+ */
+
+/* PREFERRED_RELOAD_CLASS(X,CLASS) ... A C expression that places additional
+ * restrictions on the register class to use when it is necessary to copy
+ * value X into a register in class CLASS.  On many machines, the following
+ * definition is safe: PREFERRED_RELOAD_CLASS(X,CLASS) (CLASS) 
+ * Sometimes returning a more restrictive class makes better code.  For example,
+ * on the 68k, when x is an integer constant that is in range for a moveq
+ * instruction, the value of this macro is always DATA_REGS as long as CLASS
+ * includes the data registers.  Requiring a data register guarantees that a
+ * 'moveq' will be used.
+ *
+ * ZipCPU --- you can't load certain values into all members of ALL_REGS.  For
+ * example, loading (sleep and !gie) into the CC register could halt the CPU.
+ * Hence, we only allow loads into the GENERAL_REG class.
+ */
+#define	PREFERRED_RELOAD_CLASS(X, CLASS)	GENERAL_REGS
+
+/* TARGET_PREFERRED_OUTPUT_RELOAD_CLASS(RTX,RCLASS) ... Like TARGET_PREFERRED_..
+ * RELOAD_CLASS, but for output instead of input reloads.
+ *
+ * ZipCPU --- there's gotta be a valid default behaviour for this.
+ */
+
+/* LIMIT_RELOAD_CLASS(MODE, CL) ... 
+ *
+ * Don't define this macro unless the target machine has limitations which
+ * require the macro to do something nontrivial.  ZipCPU doesn't, so we won't.
+ */
+
+/* TARGET_SECONDARY_RELOAD
+ * SECONDARY_ ...
+ * Don't think we need these ...
+ */
+
+/* CLASS_MAX_NREGS(CLASS,MODE) ... A C expression for the maximum number of
+ * consecutive registers of class CLASS needed to hold a value of mode MODE.
+ *
+ * This is closely related to the macro HARD_REGNO_NREGS.  In fact, the value
+ * of the macro CLASS_MAX_REGS(CL,M) should be the maximum value of
+ * HARD_REGNO_NREGS(REGNO,MODE) for all REGNO values in the class CLASS.
+ *
+ * This macro helps control the handling of multiple word values in the reload
+ * pass.
+ * 
+ * ZipCPU --- We'll just use HARDNO_REGNO_NREGS, since CLASS is independent for
+ * us.  We'll also choose register R0, since ... well, since it simply doesn't
+ * matter.  (HARD_REGNO_NREGS ignores this anyway)
+ */
+#define	CLASS_MAX_NREGS(CLASS, MODE)	HARD_REGNO_NREGS(0,MODE)
+
+/* CANNOT_CHANGE_MODE_CLASS
+ * ???
+ */
+
+/* TARGET_IRA_CHANGE_PSEUDO_ALLOCNO_CLASS
+ */
+
+/* TARRGET_LRA_P
+ * Default looks good.
+ */
+
+/* TARGET_REGISTER_PRIORITY(INT) ... A target hook which returns the register
+ * priority number to which the register HARD_REGNO belongs to.  The bigger the
+ * number
+ *
+ * The default version of this target hook returns always zero---good enough for
+ * the ZipCPU.
+ */
+
+/* TARGET_REGISTER_USAGE_LEVELING_P(VOID) ... A target hook which returns true
+ * if we need register usage leveling.  That means if a few hard registers are
+ * equally good for the assignment, we choose the least used hard register.  The
+ * register usage leveling may be profitable for some targets.  Don't use usage
+ * leveling for targets with conditional execution or targets with big register
+ * files as it hurts if-conversion and cross-jumping optimizations.  The default
+ * version of this target hook returns always false.
+ *
+ * ZipCPU --- Default is the right answer.
+ */
+
+/* TARGET_DIFFERENT_ADDR_DISPLACEMENT_P ...
+ * Default looks good.
+ */
+
+/* TARGET_CANNOT_SUBSTITUTE_MEM_EQUIV_P ... 
+ * Default looks good.
+ */
+
+/* TARGET_LEGITIMIZE_ADDRESS_DISPLACEMENT ....
+ */
+
+/* TARGET_SPILL_CLASS
+ *
+ * ZipCPU --- If we were running in supervisor mode only, this might be the
+ * user set of registers.  However, we're not building for that mode (now),
+ * so we'll leave this at the default of NO_REGS.
+ */
+
+/* TARGET_CSTORE_MODE(ICODE) ... Defines the machine mode to use for the
+ * boolean result of conditional store patterns.  The OCIDE argument is the 
+ * instruction code for the cstore being performed.  Not defining this hook is
+ * the same as accepting the mode encoded into operand 0 of the cstore expander
+ * patterns.
+ *
+ * ??? ZipCPU --- I don't follow this documentation.  We'll leave this at the
+ * default therefore.
+ */
+
+/* 17.09 Stack Layout and Calling Conventions */
+
+
+/* STACK_GROWS_DOWNWARD ... Define this macro if pushing a word onto the stack
+ * moves the stack pointer to a smaller address, and false otherwise.
+ *
+ * ZipCPU ... well, our stack does grow downward, but it doesn't do so auto-
+ * magically.  We have to move the stack pointer ourselves.  However, since this
+ * is our convention, we'll define it as such.
+ */
+#undef	STACK_GROWS_DOWNWARD
+#define	STACK_GROWS_DOWNWARD	1
+
+/* STACK_PUSH_CODE ... This macro defines the operation used when something is 
+ * pushed on the stack.  In RTL, a push operation will be
+ * (set (mem( STACK_PUSH_CODE(reg sp))) ...) The choiecs are PRE_DEC, POST_DEC,
+ * PRE_INC, and POST_INC.  Which of these is correct depends on the stack 
+ * direction and on whether the stack pointer points to the last item on the
+ * stack or whether it points to the space for the next item on the stack.
+ * The default is PRE_DECC when STACK_GROWS_DOWNWARD is true, which is almost
+ * always right, and PRE_INC otherwise, which is often wrong.
+ *
+ * ZipCPU --- None of these is right, so let's leave this at the default and
+ * see how badly we get mangled.  In particular, ZipCPU doesn't have any of the
+ * PRE_DEC, POST_DEC, PRE_INC, or POST_INC addressing modes used here.
+ */
+
+/* FRAME_GROWS_DOWNWARD ... Define this macro to nonzero if the addresses of
+ * local variable slots are at negative offsets from the frame pointer.
+ *
+ * ZipCPU --- If the frame pointer is defined as the stack pointer upon the
+ * start of function execution, and that stack pointer grows downward, then
+ * this should be the case as well.
+ */
+#undef	FRAME_GROWS_DOWNWARD
+#define	FRAME_GROWS_DOWNWARD	1
+// #define	FRAME_GROWS_DOWNWARD	0	// This was ECO32's value
+
+
+/* ARGS_GROW_DOWNWARD ... Define this macro if successive arguments to a
+ * function occupy decreasing addresses on the stack.
+ *
+ * ZipCPU -- we can leave this up to the compiler's preferred implementation,
+ * it is of no consequence to the hardware.
+ */
+
+/* STARTING_FRAME_OFFSET ... Offset from the frame pointer to the first local
+ * variable slot to be allocated.  If FRAME_GROWS_DOWNWARD, find the next slot's
+ * offset by subtracting the firstt slot's length from STARTING_FRAME_OFFSET.
+ * Otherwise it is found by adding the length of the first slot to the value
+ * START_FRAME_OFFSET.
+ *
+ * ZipCPU --- I'm not certain on this, let's come back after we look at how
+ * the code is getting generated.  However, the ECO32 code I am copying from
+ * suggests that 0 is the right value, so we'll use that here.
+ */
+// #warning "Re-evaluate me"
+#define	STARTING_FRAME_OFFSET	0
+
+/* STACK_ALIGNMENT_NEEDED ... Define to zero to disable final alignment of the
+ * stack during reload.  The nonzero default for this macro is suitable for most
+ * ports.
+ *
+ * ZipCPU --- we'll leave this at the default, although if any alignment code
+ * shows up on the stack we may need to adjust it.
+ */
+
+/* STACK_POINTER_OFFSET ... Offset from the SP register to the first location at
+ * which outgoing arguments are placed.  If not specified, the default value
+ * of zero is used.  This is the proper value for most machines.
+ */
+#define	STACK_POINTER_OFFSET	0
+
+/* FIRST_PARM_OFFSET ... Offset from the argument pointer register to the first
+ * argument's address.  On some machines it may depend on the data type of the
+ * function.  
+ */
+#define	FIRST_PARM_OFFSET(F)	0
+
+/* STACK_DYNAMIC_OFFSET(F) ... Offset from the stack pointer register to an item
+ * dynamically allocated on the stack, e.g., by alloca.  The default value for
+ * this macro is STACK_POINTER_OFFSET plus the length of the outgoing arguments.
+ * The default is correct for most machines, ...
+ *
+ * ZipCPU --- so we'll use it for the ZipCPU.
+ */
+
+/* INITIAL_FRAME_ADDRESS_RTX ... A C expression whose value is RTL representing
+ * the address of the initial stack frame.  This address is passed to
+ * RETURN_ADDR_RTX and DYNAMIC_CHAIN_ADDRESS.  If you don't define this macro,
+ * a reasonable default value will be used.  Define this macro in order to make
+ * frame pointer elimination work in the presence of __builtin_frame_address(C)
+ * and __builtin_return_address(C) for (C) not equal to zero.
+ *
+ * ZipCPU --- Let's try the reasonable default and see what happens.
+ */
+
+/* SETUP_FRAME_ADDRESSES ... A C expression that produces the machine-specific
+ * code to setup the stack so that arbitrary frames can be accessed.  For
+ * example, on the SPARC, we must flush all of the register windows to the stack
+ * before we can access arbitrary stack frames.  You will seldom need to define
+ * this macro.  The default is to do nothing.
+ *
+ * ZipCPU --- which is what we shall do here.
+ */
+
+/* TARGET_BUILTIN_SETJMP_FRAME_VALUE(VOID) ... This target hook should return
+ * an RTX that is used to store the address of the current frame into the
+ * builtin setjmp buffer.  The default value, virtual_stack_vars_rtx, is correct
+ * for most machines.  One reason you may need to define this target hook is if
+ * hard_frame_pointer_rtx is the appropriate value on your machine.
+ *
+ * ZipCPU --- leave this undefined, since the default value should be correct
+ * for "most" machines.
+ */
+
+/* FRAME_ADDR_RTX ... most machines do not need to define it.
+ */
+
+/* RETURN_ADDR_RTX(COUNT,FRAMEADDR) ... A C expression whose value is RTL
+ * representing the value of the return address for the frame COUNT steps up
+ * from the current frame, after the prologue.  FRAMEADDR is the frame pointer
+ * of the COUNT frame, or the frame pointer of the COUNT-1 frame if 
+ * RETURN_ADDR_IN_PREVIOUS_FRAME is nonzero.  The value of the expression must
+ * always be the correct address when COUNT is nonzero, but may be NULL_RTX if
+ * there is no way to determine the return address of other frames.
+ *
+ * ZipCPU --- I have no idea how we'd do this, so let's just return NULL_RTX.
+ */
+#undef	RETURN_ADDR_RTX
+#define	RETURN_ADDR_RTX(COUNT,FRAMEADDR)	NULL_RTX
+
+/* RETURN_ADDR_IN_PREVIOUS_FRAME ... Define this macro to nonzero value if the
+ * return address of a particular stack frame is accessed from the frame pointer
+ * of the previous stack frame.  The zero default for this macro is suitable
+ * for most ports.
+ *
+ * ZipCPU---Default works here as well.
+ */
+
+/* INCOMING_RETURN_ADDR_RTX ... A C expression whose value is RTL representing
+ * the location of the incoming return address at the beginning of any function,
+ * before the prologue.  This RTL is either a REG, indicating that the return
+ * value is saved in 'REG', or a MEM representing the location in the stack.  
+ * If this RTL is a REG, you should define DWARF_RETURN_COLUMN to
+ * DWARF_FRAME_REGNUM(REGNO).
+ *
+ * ZipCPU --- While our incoming return address could theoretically be in any
+ * register, our machine description file is going to place it into register
+ * R0, so that's what we return here.
+ */
+#undef	INCOMING_RETURN_ADDR_RTX
+#define	INCOMING_RETURN_ADDR_RTX	gen_rtx_REG(SImode, zip_R0)
+
+
+/* DWARF_ALT_FRAME_RETURN_COLUMN
+ */
+
+/* DWARF_ZERO_REG ... A C exrpession whose value is an integer giving a DWARF2
+ * register number that is considered to always have the value zero.  This
+ * should only be defined if the target has an architected zero register (ZipCPU
+ * does not), and someone decided it was a good idea to use that register number
+ * to terminate the stack backtrace.  New ports should avoid this (so the
+ * ZipCPU port will avoid it as well).
+ *
+ */
+
+/* TARGET_DWARF_HANDLE_FRAME_UNSPEC
+ */
+
+/* INCOMING_FRAME_SP_OFFSET
+ */
+#define	INCOMING_FRAME_SP_OFFSET	0
+
+/* ARG_POINTER_CFA_OFFSET
+ */
+
+/* FRAME_POINTER_CFA_OFFSET
+ */
+
+/* CFA_FRAME_BASE_OFFSET
+ */
+
+/* 17.09.02 Exception handling support */
+
+/* EH_RETURN_DATA_REGNO(N) ... A C expression whose value is the Nth register
+ * number used for data by exception handlers, or INVALID_REGNUM if fewer than
+ * N registers are usable.  The exception handling library routines communicate
+ * with the exception handlers via a set of agreed upon registers.  Ideally
+ * these registers should be call clobbered; it is possible to use call-saved
+ * registers, but may negatively impact code size.  The target must support at 
+ * least 2 data registers, but should define 4 if their are enough free
+ * registers.  
+ *
+ * You must define this macro if you want to support call frame exception 
+ * handling like that provided by DWARF 2.
+ */
+#define	EH_RETURN_DATA_REGNO(N)	(((N<ZIP_FIRST_ARG_REGNO)||(N>ZIP_LAST_ARG_REGNO))?(N-1):INVALID_REGNUM)
+
+/* EH_RETURN_STACKADJ_RTX ... A C expression whose value is RTL representing
+ * a location in which to store a stack adjustment to be applied before function
+ * return.  This is used to unwind the stack to an exception handler's call
+ * frame.  It will be assigned zero on code paths that return normally.
+ *
+ * Do not define this macro if the stack pointer is saved and restored by the
+ * regular prolog and epilog code in the call frame itself (which it is for the
+ * ZipCPU); in this case, the exception handling library routines will update 
+ * the stack location to be restored in place.  Otherwise, you must define this
+ * macro if you want to support call frame exception handling like that provided
+ * by DWARF 2.
+ *
+ */
+
+/* EH_RETURN_HANDLER_RTX ... A C expression whose value is RTL representing a
+ * location in which to store the address of an exception handler to which we
+ * should return.  It will not be assigned on code paths that return normally.
+ *
+ * Typcally this is the location in the call frame at which the normal return
+ * address is stored.  For targets that return by popping an address of the 
+ * stack, this might be a memory address just below the target callf rame
+ * rather than inside the current call frame.  If defined,
+ * EH_RETURN_STACKADJ_RTX will have already been assigned, so it may be used
+ * to calculate the location of the target call frame.
+ *
+ * If you want to support call frame exception handling, you must define either
+ * this macro or the eh_return instruction pattern.
+ */
+// #warning "I don't know what to do here."
+
+/*
+ *
+ *
+ *
+ *   REST OF SECTION SKIPPED ...
+ *
+ *
+ *
+ */
+
+/* 17.09.03 Specifying how stack checking is done */
+
+/* STACK_CHECK_BUILTIN ... a non-zero value if stack checking is done by the
+ * configuration files in a machine-dependent manner.  You should define this
+ * macro if stack checking is required by the ABI of your machine or if you
+ * would like to do stack checking in some more efficient way than the generic
+ * appraoch.  The default value of this macro is zero.
+ *
+ * ZipCPU --- The default makes sense for us.
+ */
+// #define STACK_CHECK_BUILTIN	0
+
+/* STACK_CHECK_STATIC_BUILTIN ... A nonzero value if static stack checking is 
+ * done by the configuration files in a machine-dependent manner.  You should
+ * define this macro if you would like to do static stack checking in some more
+ * efficient way than the generic approach.  The default value of this macro
+ * is zero.
+ *
+ * ZipCPU --- The default makes sense for us.
+ */
+
+/* STACK_CHECK_PROBE_INTERVAL_EXP ...  An integer specifying the interval at
+ * which GCC must generate stack probe instructions, defined as 2 raised to this
+ * interval.  You will normally define this macro so that the interval is no
+ * larger than the size of the "guard pages" at the end of a stack area.  The
+ * default value of 12 (4096-byte interval) is suitable for most systems.
+ *
+ * ZipCPU --- Default.
+ */
+
+/* STACK_CHECK_MOVING_SP ... An integer which is non-zero if GCC should move
+ * the stack pointer page by page when doing probes.  This can be necessary
+ * on systems where the stack pointer contains the bottom address of the memory
+ * area accessible to the executing thread at any point in time.  In this
+ * situation, an alternate signal stack is required in order to be able to
+ * recover from a stack overflow.  The default value of this macro is zero.
+ *
+ * ZipCPU -- Default.
+ */
+
+/* STACK_CHECK_PROTECT
+ */
+/* STACK_CHECK_MAX_FRAME_SIZE
+ * ... you should normally not change the default value of this macro.
+ */
+/* STACK_CHECK_FIXED_FRAME_SIZE
+ * ... you ... will normally use the default of four words.
+ */
+
+/* STACK_CHECK_MAX_VAR_SIZE
+ * ... you will normally not need to override that default.
+ */
+
+/* 17.09.04 Registers that Address the Stack Frame*/
+
+/* STACK_POINTER_REGNUM ... The register number of the stack pointer register,
+ * which must also be a fixed register according to FIXED_REGISTERS.  On most
+ * machines, the hardware determines which register this is.
+ */
+#undef STACK_POINTER_REGNUM
+#define	STACK_POINTER_REGNUM	zip_SP
+
+/* FRAME_POINTER_REGNUM ... The register number of the frame pointer register,
+ * which is used to access certain automatic variables in the stack frame.  On
+ * some machines, the hardware determines which register this is.  On other
+ * machines you can choose any register you wish for this purpose.
+ *
+ * ZipCPU --- While I'd like to dump this pointer, since I don't really see
+ * a need for it, alloca() requires it.  Therefore let's assine a register to
+ * this purpose and watch what the compiler does with it.
+ */
+#ifdef	zip_FP_PSEUDO
+#define	FRAME_POINTER_REGNUM	zip_FP_PSEUDO
+#else
+#define	FRAME_POINTER_REGNUM	zip_FP
+#endif
+
+/* HARD_FRAME_POINTER_REGNUM ... On some machines the offset between the frame
+ * pointer and starting offset of the automatic variables is not known until 
+ * after register allocation has been done (for example, because the saved 
+ * registers are between these two locations).  On those machines, define 
+ * FRAME_POINTER_REGNUM the number of a special, fixed register to be used
+ * internally until the offset is known, and define HARD_FRAME_POINTER_REGNUM
+ * to be the actual hard register number used for the frame pointer.
+ *
+ * Do not define this macro if it would be the same as FRAME_POINTER_REGNUM
+ *
+ * ZipCPU --- we do not define this macro.
+ */
+#if (zip_FP == FRAME_POINTER_REGNUM)
+#define HARD_FRAME_POINTER_REGNUM	zip_FP
+#endif
+
+/* ARG_POINTER_REGNUM ... The register number of the arg pointer register, which
+ * is used to access the function's argument list.  On some machines, this is
+ * the same as the frame pointer register.  On some machines, the hardware
+ * determines which register this is.  On other machines, you can choose any
+ * register you wish for this purpose.  If this is not the same register as the
+ * frame pointer register, then you must mark it as a fixed register according
+ * to FIXED_REGISTERs, or arrange to be able to eliminate it.
+ *
+ * ZipCPU --- We really don't want to lose another register to something
+ * pointless, so let's set this to be the frame pointer register.  Especially
+ * given the ZipCPU's ease of accessing things via offsets of registers, this
+ * should work for a rather large stack frame.
+ */
+#define ARG_POINTER_REGNUM	FRAME_POINTER_REGNUM
+
+/* HARD_FRAME_POINTER_IS_FRAME_POINTER ... define this to be a preprocessor
+ * constant that is nonzero if hard_frame_pointer_rtx and frame_pointer_rtx
+ * should be the same.  The default definition is sufficient for us.
+ */
+
+/* HARD_FRAME_POINTER_IS_ARG_POINTER ... 
+ * ZipCPU doesn't need this macro
+ */
+
+/* RETURN_ADDRESS_POINTER_REGNUM ... The register number of the return address
+ * pointer register, which is used to access the current function's return
+ * address from the stack.  On some machines, the return address is not at a 
+ * fixed offset from the frame pointer or stack pointer or argument pointer.
+ * This register can be defined to point to the return address on the stack, and
+ * then to be converted by ELIMINABLE_REGS into either the frame pointer or the
+ * stack pointer.
+ *
+ * Do not define this macro unless there is no other way to get the return 
+ * address from the stack.
+ *
+ * ZipCPU---we need this.
+ */
+#define	RETURN_ADDRESS_REGNUM	zip_R0
+
+
+/* STATIC_CHAIN_REGNUM ... Register numbers used for passing a function's
+ * static chain pointer.  If register windows are used, the register number as
+ * seen by the called function is STATIC_CHAIN_INCOMING_REGNUM, while the
+ * register number as seen by the calling function is STATIC_CHAIN_REGNUM.  If
+ * these register are the same, STATIC_CHAIN_INCOMING_REGNUM need not be
+ * defined.
+ *
+ * ZipCPU doesn't have register windows, so we don't need to define this.
+ */
+// #warning "I have no reason to believe this will even work"
+#define	STATIC_CHAIN_REGNUM	zip_GOT
+
+/* TARGET_STATIC_CHAIN ... This hook replaces the use of STATIC_CHAIN_REGNUM et
+ * al for targets that may use different static chain locations for different
+ * nested functions.  This may be required if the target has function attributes
+ * that affect the calling conventions of the function and those calling
+ * conventions use different static chain locations.
+ *
+ * ZipCPU --- don't need this.
+ */
+// #define	STATIC_CHAIN_REGNUM	zip_R11
+
+
+/* DWARF_FRAME_REGISTERS ... This macro specifies  the maximum number of hard
+ * registers that can be saved in a call frame.  This is used to size data
+ * structures used in DWARF2 exception handling.  
+ *
+ * Prior to GCC 3.0, this macro was needed in order to establish a stable
+ * exception handling ABI in the face of adding new hard registers for ISA
+ * extensions.  In GCC 3.0 and later, the EH ABI is insulated from changes in
+ * the number of hard registers.  Nevertheless, this macro can still be used to
+ * reduce the runtime memory requirements of the exception handling routines,
+ * which can be substantial if the ISA contains a lot of registers that are not
+ * call-saved.
+ *
+ * If this macro is not defined, it defaults to FIRST_PSEUDO_REGISTER.
+ *
+ * ZipCPU --- The default is not sufficient.  The CC and PC registers need to 
+ * be saved and examined as well in any debug/exception context.  Hence, we
+ * define this to be all of our registers.
+ */
+#undef DWARF_FRAME_REGISTERS
+#define	DWARF_FRAME_REGISTERS	16
+
+/* PRE_GCC3_DWARF_FRAME_REGISTERS ... This macro is similar to DWARF_FRAME_REG..
+ * but is provided for backward compatibility in pre GCC 3.0 compiled code.
+ *
+ * If not defined, it defaults to DWARF_FRAME_REGISTERS---which is perfect for
+ * the ZipCPU.
+ */
+
+/* DWARF_REG_TO_UNWIND_COLUMN(REGNO) ... Define this macro if the target's
+ * representation for dwarf registers is different than the internal 
+ * representation for unwind column.  Given a dwarf register, this macro should
+ * return the unwind column number to use instead.
+ *
+ * ... ???
+ */
+
+/* DWARF_FRAME_REGNUM(REGNO) ... Define this macro is the target's
+ * representation for dwarf registers used in .eh_frame or .debug_frame is
+ * different from that used in other debug info sections.  Given a GCC hard
+ * register number, this macro should return the .eh_frame register number.
+ * The default is DBX_REGISTER_NUMBER(REGNO).
+ *
+ * ZipCPU --- provided we define DBX_REGISTER_NUMBER(REGNO) well, this default
+ * should still work for us.
+ */
+
+/* DWARF2_FRAME_REG_OUT(REGNO, FOR_EH) ... Define this macro to map register
+ * numbers held in the call frame info that GCC has collected using
+ * DWARF_FRAME_REGNO to those that should be output in .debug_frame (for_eh is
+ * zero) and .eh_frame (for_eh is non-zero). The default is to return REGNO.
+ *
+ * ZipCPU --- Default is good enough.
+ */
+
+/* REG_VALUE_IN_UNWIND_CONTEXT ... Define this macro if the target stores
+ * register values as _Unwind_Word type in unwind context.  It should be defined
+ * if target register size is larger than the size of void *.  The default
+ * is to store register values as void *type.
+ *
+ * ZipCPU --- Default is what we need.
+ */
+
+/* ASSUME_EXTENDED_UNWIND_CONTEXT ... Define this macro to be 1 if the target 
+ * always uses extended unwind context with version, args_size, and by_value
+ * fields.  If it is undefined, it will always be defined to 1 when REG_VALUE_IN_UNWIND_CONTEXT is defined and 0 otherwise.
+ *
+ */
+
+
+/* 17.09.05 Eliminating Frame Pointer and Arg Pointer */
+
+/* TARGET_FRAME_POINTER_REQUIRED(VOID) ... This target hook should return true 
+ * if a function must have and use a frame pointer.  This target hook is
+ * called in the reload pass.  If its return value is true, the function will
+ * have a frame pointer.
+ *
+ * This target hook can in principle examine the current function and decide
+ * according to the facts, but on most machines the constant false or the
+ * constant true suffices.  Use false when the machine allows code to be
+ * generated with no frame pointer, and doing so saves some time or space. 
+ * Use true when there is no possible advantage to avoiding a frame pointer.
+ *
+ * ZipCPU---if we add in a frame pointer, we become register starved.  Hence,
+ * we'll treat this as a constant false--which is also the default value.
+ */
+#define	target_frame_pointer_required	zip_frame_pointer_required
+
+/* INITIAL_FRAME_POINTER_OFFSET ... A C statement to store in the variable
+ * depth-var the difference between the frame pointer and the stack pointer
+ * values immediately after the function prologue.  The value would be computed
+ * from information such as the result of get_frame_size() and the tables of 
+ * registers regs_ever_live and call_used_regs.
+ *
+ * If ELIMINABLE_REGS is defined, this macro will not be used and need not be
+ * defined.  Otherwise, it must be defined even if TARGET_FRAME_POINTER_REQD
+ * always returns true; in that case you may set depth-var to anything.
+ *
+ * ZipCPU --- we intend to set ELIMINABLE_REGS, so this is not necessary.
+ */
+// #define	INITIAL_FRAME_POINTER_OFFSET(DEPTH)	(DEPTH) = 0
+
+
+/* ELIMINABLE_REGS ... If defined, this macro specifies a table of register
+ * pairs used to eliminate unneeded registers that point into the stack frame.
+ * If it is not defined, the only elimination attempted by the compiler is to
+ * replace references to the frame pointer with references to the stack pointer.
+ *
+ * On some machines, the position of the argument pointer is not known until
+ * the compilation is completed.  In such a case, a separate hard register
+ * must be used for the argument pointer.  This register can be eliminated by
+ * replacing it with either the frame pointer or the argument pointer,
+ * depending on whether or not the frame pointer has been eliminated.
+ *
+ * ZipCPU we'll take their suggestion and define this as:
+ */
+#undef ELIMINABLE_REGS
+#ifdef	zip_FP_PSEUDO
+#define	ELIMINABLE_REGS	\
+	 {{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM},		\
+	  { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM},	\
+	  { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM},	\
+	  { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}}
+#else
+# if (ARG_POINTER_REGNUM == FRAME_POINTER_REGNUM)
+#  define	ELIMINABLE_REGS	\
+	 {{ FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}}
+# else
+#  define	ELIMINABLE_REGS	\
+	{{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM },	\
+	 { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM },	\
+	 { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}}
+# endif
+#endif
+
+/* bool TARGET_CAN_ELIMINATE(FROM,TO) ... This target function should return
+ * true if the compiler is allowed to try to replace register number FROM with
+ * register number TO.  This target hook need only be defined if ELIMINABLE_REGS
+ * is defined, and will usually return true since most of the cases preventing
+ * register elimination are things that the compiler  already knows about.
+ * 
+ * ZipCPU ... does the compiler  know about my decision as to whether or not
+ * the frame pointer was needed?  The m68k code suggests it does not ...
+ */
+#define TARGET_CAN_ELIMINATE	zip_can_eliminate
+
+/* INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) ... This macro is similar to 
+ * INITIAL_FRAME_POINTER_OFFSET.  It specifies the initial difference between
+ * the specified pair of registers.  This macro must be defined if
+ * ELIMINABLE_REGS is defined.
+ *
+ * ZipCPU---Is there a default we can use?
+ */
+#define	INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET)	(OFFSET)=0
+/*
+#define	INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET)		\
+	do { (OFFSET) = zip_initial_elimination_offset((FROM), (TO)); } \
+	while(0)					\
+*/
+
+/* 17.09.06 Passing function arguments on the stack */
+
+/* TARGET_PROMOTE_PROTOTYPES ... Returns true if an argument declared in a 
+ * prototype as an integral type smaller than int should actually be
+ * passed as an int.  In addition to avoiding errors in certain cases of
+ * mismatch, it also makes for better code on certain machines.  The default is
+ * to not promote prototypes.
+ *
+ * Since everything is an int on the ZipCPU, let's promote anything smaller
+ * (which should still be an int) up to an int anyway.
+ */
+#undef	TARGET_PROMOTE_PROTOTYPES
+#define	TARGET_PROMOTE_PROTOTYPES	hook_bool_const_tree_true
+
+/* PUSH_ARGS ... A C expression.  If nonzero, push instructions will be used to
+ * pass outgoing arguments.  If the target machine does not have a push
+ * instruction, set it to zero.  That directs GCC to use an alternate strategy:
+ * to allocate the entire argument block and then store the arguments into it.
+ * When PUSH_ARGS is nonzero, PUSH_ROUNDING must be defined too.
+ *
+ * ZipCPU does not have a push instruction, so we set this to zero.
+ */
+#undef	PUSH_ARGS
+#define	PUSH_ARGS	0
+
+/* PUSH_ARGS_REVERSED ... A C expression.  If nonzero, function arguments will
+ * be evaluated last to first, rather than first to last.  If this macro is
+ * not defined, it defaults to PUSH_ARGS on targets where the stack and args
+ * grow in opposite directions, and zero otherwise.
+ *
+ * ZipCPU---Let's evaluate our arguments first to last.
+ */
+#define	PUSH_ARGS_REVERSED	1
+
+/* PUSH_ROUNDING(NPUSHED) ... A C expression that is the number of bytes
+ * actually pushed onto the stack when an instruction attempts to push
+ * (NPUSHED) bytes.
+ *
+ * ZipCPU---We cannot push bytes.  Let's leave this undefined and see what
+ * happens.
+ */
+// #warning "No appropriate definition seemed right."
+
+/* ACCUMULATE_OUTGOING_ARGS ... A C expression.  If non-zero, the maximum amount
+ * of space required for outgoing arguments will be computed and placed into
+ * crtl->outgoing_args_size.  No space will be pushed onto the stack for each call; instead the function prologue should increase the stack frame size by this
+ * amount.
+ *
+ * ZipCPU---This is *cool* and so necessary---it saves an extra two instructions
+ * each time we try to call a function/routine.  Yes, we want and *need* this
+ * for good performance.  I mean, think of it, free performance increase?  Who
+ * could argue with that?
+ */
+#undef	ACCUMULATE_OUTGOING_ARGS
+#define	ACCUMULATE_OUTGOING_ARGS	1
+
+
+/* REG_PARM_STACK_SPACCE(FN) ... Define this macro if functions should assume
+ * that stack space has been allocated for arguments even when their values
+ * are passed in registers.  The value of this macro is the size, in bytes, of
+ * the area reserved for arguments passed in registers for the function
+ * represented by FN, which can be zero if GCC is calling a library function.
+ * The argument FN can be the FUNCTION_DECL, or the type itself of the function.
+ *
+ * This space can be allocated by the caller, or be part of the machine
+ * dependent stack frame: OUTGOING_REG_PARM_STACK_SPACE says which.
+ *
+ * ZipCPU --- Why allocate space you won't use?  Let's leave this undefined
+ * therefore.
+ */
+// #undef	REG_PARM_STACK_SPACE
+
+
+
+/* INCOMING_REG_PARM_STACK_SPACE(FN) ... Like REG_PARM_STACK_SPACE, but for
+ * incoming register arguments.  Define this macro if space guaranteed when
+ * compiling a function body is different to space required when making a call,
+ * a situation that can arise with K&R style function definitions.
+ *
+ */
+
+/* OUTGOING_REG_PARM_STACK_SPACE(FN) ... Define this to a nonzero value if it 
+ * is the responsibility of the caller to allocate the area reserved for
+ * arguments passed in registers when calling a function of FN.  FN may be NULL
+ * if the function called is a library function.
+ *
+ * ZipCPU---Why allocate space you don't need?
+ */
+#define	OUTGOING_REG_PARM_STACK_SPACE(FNTYPE)	0
+
+
+/* STACK_PARMS_IN_REG_PARM_AREA ... Define this macro if REG_PARM_STACK_SPACE
+ * is defined, buyt the stack parameters don't skip the area specified by it.
+ *
+ * ZipCPU---We didn't define REG_PARM_STACK_SPACE, so we won't define this.
+ */
+
+/* TARGET_RETURN_POPS_ARGS(DECL,FNTYPE,SZ) ... This target hook returns the
+ * number of bytes of its own arguments that a function pops on returning, or 0
+ * if the function pops no arguments and the caller must therefore pop them all
+ * after the function returns.
+ *
+ * ZipCPU --- If we define this, we'll lose our gain from
+ * ACCUMULATE_OUTOING_ARGS.  Thus, we leave this undefined.
+ */
+
+/* CALL_POPS_ARGS(CUM) ... A C expression that should indicate the number of
+ * bytes a call sequence pops off of the stack.  It is added to the value of
+ * RETURN_POPS_ARGS when compiling a function call.  CUM is the variable in
+ * which all arguments to the function have been accumulated.
+ *
+ * ZipCPU---The call sequence, by itself, doesn't touch the stack.  Therefore
+ * this is zero.
+ */
+#undef CALL_POPS_ARGS
+#define	CALL_POPS_ARGS(CUM)	0
+
+
+/* 17.09.07 Passing arguments in registers */
+
+/* TARGET_FUNCTION_ARG ... Return an RTX indicating whether a function argument
+ * is passed in a register, and if so, which register.
+ */
+/* 
+ * This has been poisoned ... so let's not define it anymore and look for
+ * a better way to do this ...
+ *
+ * #define	FUNCTION_ARG(CUM, MODE, TYPE, NAMED) (((NAMED) == 0) ? NULL_RTX
+ * 	: targetm.calls.must_pass_in_stack(MODE, TYPE)	? NULL_RTX
+ * 	: (CUM) > ZIP_LAST_ARG_REGNO			? NULL_RTX
+ * 	: gen_rtx_REG(MODE, CUM))
+ */
+#define	TARGET_FUNCTION_ARG	zip_function_arg
+
+
+/* TARGET_MUST_PASS_IN_STACK ...
+ */
+// #undef	TARGET_MUST_PASS_IN_STACK
+// #define	TARGET_MUST_PASS_IN_STACK	zip_must_pass_in_stack
+
+/* TARGET_FUNCTION_INCOMING_ARG ... Define this hook if the target machine
+ * has register windows, ... which ZipCPU does not have.
+ */
+
+/* TARGET_USE_PSEUDO_PIC_REG(void) ... This hook should return 1 in case
+ * pseudo register should be created for pic_offset_table_rtx during function
+ * expand.
+ *
+ * This should be defined by global parameters, isn't it?
+ */
+
+/* TARGET_INIT_PIC_REG(v) ... Perform a target dependent initialization of 
+ * pic_offset_table_rtx.  This hook is called at the start of register
+ * allocation.
+ *
+ * ZipCPU---Let's revisit this.
+ */
+// #warning "Come back and relook at relocations"
+
+/* TARGET_ARG_PARTIAL_BYTES ... This target hook returns the number of bytes
+ * at the beginning of an argument that must be put in registers.  The value
+ * must be zero for arguments that are passed entirely in registers or that
+ * are entirely pushed on the stack.
+ */
+// #undef	TARGET_ARG_PARTIAL_BYTES
+// #define	TARGET_ARG_PARTIAL_BYTES	zip_arg_partial_bytes
+
+/* TARGET_PASS_BY_REFERENCE(CUM,MOD,TREE,NAMED) ... This target hook should
+ * return true if an argument at the position indicated by CUM should be passed
+ * by reference.  This predicate is queried after target independent reasons
+ * for being pssed by reference, such as TREE_ADDRESSABLE(TREE).
+ *
+ */
+// #undef	TARGET_PASS_BY_REFERENCE
+// #define	TARGET_PASS_BY_REFERENCE	zip_pass_by_reference
+
+/* CUMULATIVE ARGS ...  A C type for declaring a variable that is used as the
+ * first argument of 'FUNCTION_ARG' and other related values.
+ *
+ * ZipCPU---We're in trouble if an 'int' won't work, so let's just use that.
+ */
+#define	CUMULATIVE_ARGS	int
+
+/*
+ * OVERRIDE_ABI_FORMAT
+ */
+
+/* INIT_CUMULATIVE_ARGS ... A C statement (sans semicolon) for initializing the
+ * variable CUM for the state at the beginning of the argument list. 
+ *
+ *
+ * ZipCPU---The first argument is passed in register ZIP_FIRST_ARG_REGNO, or
+ * R1 (unless it has been redefined above ...)
+ */
+#define	INIT_CUMULATIVE_ARGS(CUM,FNTYPE,LIBNAME,FNDECL,N_NAMED_ARGS) (CUM = 0)
+
+/* INIT_CUMULATIVE_LIBCALL_ARGS
+ * INIT_CUMULATIVE_INCOMING_ARGS
+ *
+ * These default to the last INIT_CUM_ARGS value above.
+ */
+
+/* TARGET_FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) .. This hook updates
+ * the summarizer variable pointed to by CUM to advance past an argument in 
+ * the argument list.  The values MODE, TYPE, and NAMED describe that
+ * argument.  Once this is done, the variable CUM is suitable for analyzing the
+ * following argument with TARGET_FUNCTION_ARG, etc.  This hook need not do
+ * anything if the argument in question was passed on the stack.  The compiler
+ * knows how to track the amount of stack space used for arguments without
+ * any special help.
+ *
+ * ZipCPU---Here we simply copy from ECO32.
+ */
+#define	TARGET_FUNCTION_ARG_ADVANCE	zip_function_arg_advance
+
+/*
+ * TARGET_ARG_OFFSET --- not necessary
+ * FUNCTION_ARG_PADDING	--- not necessary, since we shouldn't be padding
+ * PAD_VARARGS_DOWN	--- not necessary, since we shouldn't be padding
+ * BLOCK_REG_PADDING
+ * TARGET_FUNCTION_ARG_BOUNDARY
+ * TARGET_FUNCTION_ARG_ROUND_BOUNDARY
+ */
+
+/* FUNCTION_ARG_REGNO_P(REGNO) ... A C expression that is nonzero if REGNO is
+ * the number of a hard register in which function arguments are sometimes
+ * passed.  This does not include implicit arguments such as the static chain
+ * and the structure-value address.  On many machines, no registers can be used
+ * for this purpose since all function arguments are pushed on the stack.
+ */
+#define	FUNCTION_ARG_REGNO_P(r) ((r >= ZIP_FIRST_ARG_REGNO)&&(r<=ZIP_LAST_ARG_REGNO))
+
+/* TARGET_SPLIT_COMPLEX_ARG(TYPE) ... This hook should return true if parameter
+ * of type TYPE are passed as two scalar parameters.  By default, GCC will
+ * attempt to pack complex arguments into the target's word size.  Some ABI's
+ * require complex arguments to be split and treated as their individual
+ * components.  
+ *
+ * The default value of this hook is NULL, which is treated as always false,
+ * and which should be good enough for ZipCPU--which can go either way.
+ */
+
+/* TARGET_BUILD_BUILTIN_VA_LIST ... This hook returns a type node for va_list
+ * for the target.  The default version of the hook returns void*.
+ *
+ */
+
+/* TARGET_ENUM_VA_LIST_P
+ */
+
+/* TARGET_FN_ABI_VA_LIST ... This hook returns the va_list type of the calling
+ * convention specified by FN.  The default version of this returns va_list_type_node.
+ */
+
+/* TARGET_FN_ABI_VA_LIST
+ */
+
+/* TARGET_CANONICAL_VA_LIST_TYPE
+ */
+
+/* TARGET_GIMPLIFY_VA_ARG_EXPR
+ */
+
+/* TARGET_VALID_POINTER_MODE(MODE) ... Define this to return nonzero if the
+ * port can handle pointers with machine mode MODE.  The default version of this
+ * hook returns true for both ptr_mode and Pmode.
+ *
+ * ZipCPU---if Pmode is properly defined (above, and I think it is), then the
+ * default behavior is quite appropriate.
+ */
+
+/* TARGET_REF_MAY_ALIAS_ERRNO(REFP) ... Define this to return nonzero if the
+ * memory reference REF may alias with the system C library errno location.
+ * The default version of this hook assumes the system C library errno location
+ * is either a declaration of type int or accessed by dereferencing a pointer
+ * to int.
+ *
+ * ZipCPU --- Default sounds good to me.
+ */
+
+
+/* TARGET_SCALAR_MODE_SUPPORTED_P(MODE) ... Define this to return nonzero if
+ * the port is prepared to handl instructions involving scalar mode MODE.  For
+ * a scalar mode to be considered supported, all the basic arithmetic and
+ * comparisons must work.
+ *
+ * The default version of this hook returns true for any mode required to
+ * handle the basic C types (as defined by the port).  Included here are the
+ * double-word arithmetic supported by the code in optabs.c.
+ */
+#undef	TARGET_SCALAR_MODE_SUPPORTED_P
+#define	TARGET_SCALAR_MODE_SUPPORTED_P	zip_scalar_mode_supported_p
+
+/* TARGET_VECTOR_MODE_SUPPORTED_P(MODE) ... Define this to return nonzero if the
+ * port is prepared to handle instructions involving vector mode MODE.  At the
+ * very least, it must have move patterns for this mode.
+ *
+ * ZipCPU---does not support any vector modes.
+ */
+#undef TARGET_VECTOR_MODE_SUPPORTED_P
+#define	TARGET_VECTOR_MODE_SUPPORTED_P	hook_bool_mode_false
+
+/* TARGET_ARRAY_MODE_SUPPORTED_P(MODE, NELEMS) ... Return true if GCC should 
+ * try to use a scalar mode to store an array of NELEMS elements, given that
+ * each element has mode MODE.  Returning true here overrides the usual MAX_FIXED_MODE limit and allows GCC to use any defined integer mode.
+ *
+ * ZipCPU---Sounds good.
+ */
+// #undef	TARGET_ARRAY_MODE_SUPPORTED_P
+// #define	TARGET_ARRAY_MODE_SUPPORTED_P	zip_array_mode_supported_p
+
+/* TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P(MODE) ... Define this to return
+ * nonzero if libgcc provides support for the floating-point mode MODE, which is
+ * known to pass TARGET_SCALAR_MODE_SUPPORTED_P.  The default version of this
+ * hook returns true for all of SFmode, DFmode, XFmode, and TFmode, if such
+ * modes exist.
+ *
+ * ZipCPU---We only support SFmode and DFmode, but for now only in emulation
+ * (if we can).  Let's allow both of those and see how far we get.
+ */
+#undef	TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P
+#define	TARGET_LIBGCC_FLOATING_MODE_SUPPORTED_P	zip_libgcc_floating_mode_supported_p
+
+/* TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P(MODE) ... Define this to return
+ * nonzero for machine modes for which the port has small register classes.  If
+ * target hook returns nonzero for a given MODE, the compiler will try to 
+ * minimize the lifetime of registers in MODE.  The hook may be called with
+ * VOIDmode as an argument.  In this case, the hook is expected to return 
+ * nonzero if it returns nonzero for any mode.
+ *
+ * The default version of this hook returns false for any mode.
+ *
+ * ZipCPU---Default sounds good.
+ */
+
+/* 17.09.08 How scalar function values are returned */
+
+/* TARGET_FUNCTION_VALUE
+ */
+
+/* LIBCALL_VALUE
+ */
+
+
+/* 17.09.09 How large values are returned */
+
+/* TARGET_RETURN_IN_MEMORY(TYP,FNTYP) ... This target hook should return a
+ * nonzero value to say to return the function value in memory, just as large
+ * structures are always returned.  Here type will be the data type of the value
+ * and FNTYP will be the type of the function doing the returning, or NULL
+ * for libcalls.
+ *
+ */
+#undef	TARGET_RETURN_IN_MEMORY
+#define	TARGET_RETURN_IN_MEMORY	zip_return_in_memory
+
+/* DEFAULT_PCC_STRUCT_RETURN
+ * TARGET_STRUCT_VALUE_RTX
+ * PCC_STATIC_STRUCT_RETURN
+ * TARGET_GET_RAW_RESULT_MODE
+ * TARGET_GET_RAW_ARG_MODE
+ */
+
+
+/* 17.09.10 Caller-Saves Register Allocation */
+/* 17.09.11 Function Entry and Exit */
+// TARGET_ASM_FUNCTION_PROLOGUE
+// TARGET_ASM_FUNCTION_END_PROLOGUE
+// TARGET_ASM_FUNCCTION_BEGIN_EPILOGUE
+// TARGET_ASM_FUNCTION_EPILOGUE
+/* EXIT_IGNORE_STACK ... Define this macro as a C expression that is nonzero
+ * if the return instruction or the function epilogue ignores the value of the
+ * stack pointer; in other words, if it is safe to delete an instruction to 
+ * adjust the stack pointer before a return from the function.
+ *
+ * The default is 0.
+ *
+ * Note that this macro's value is relevant only for functions for which frame
+ * pointers are maintained.  It is never safe to delete a final stack adjustment
+ * in a function that has no frame pointer, and the compiler knows this
+ * regardless of EXIT_IGNORE_STACK.
+ *
+ * ZipCPU -- Thanks to the example of the m68k, and a careful selection of what
+ * our options otherwise could have been, our epilogue code does not use the
+ * stack register at all, but rather starts by moving the frame register into
+ * the stack register.
+ */
+#define EXIT_IGNORE_STACK	1
+// EPILOGUE_USES(regno)
+// EH_USES(regno)
+// TARGET_ASM_OUTPUT_MI_THUNK
+// TARGET_ASM_CAN_OUTPUT_MI_THUNK
+
+/* 17.09.12 Generating code for profiling */
+// FUNCTION_PROFILER
+// PROFILE_HOOK
+// NO_PROFILE_COUNTERS
+// PROFILE_BEFORE_PROLOGUE
+// TARGET_KEEP_LEAF_WHEN_PROFILED
+
+/* 17.09.13 Permitting tail calls*/
+
+/* TARGET_FUNCTION_OK_FOR_SIBCALL(DECL,EXP) ... True if it is OK to do sibling
+ * call optimizations for the specified call expression EXP.  DECL will be the
+ * called function, or NULL if this is an indirect call.
+ *
+ * It is not uncommon for limitations of calling conventions to prevent tail
+ * calls to functions outside the current unit of translation, or during PIC
+ * compilation.  The hook is used to enforce these restrictions, as the sibcall
+ * md pattern can not fail, or fall over to a 'normal' call.  The criteria for
+ * successful sibling call optimization may vary greatly between different
+ * architectures.
+ *
+ * ?? What's a sibling call?
+ */
+
+// TARGET_EXTRA_LIVE_ON_ENTRY
+// TARGET_SET_UP_BY_PROLOGUE
+// TARGET_WARN_FUNC_RETURN
+
+/* 17.09.14 Stack smashing protection */
+// TARGET_STACK_PROTECT_GUARD
+// TARGET_STACK_PROTECT_FAIL
+// TARGET_SUPPORTS_SPLIT_STACK
+
+/* 17.09.15 Miscellaneous register hooks */
+
+// TARGET_CALL_FUSAGE_CONTAINS_NON_CALLEE_CLOBBERS
+
+/* TARGET_CALL_FUSAGE_CONTAINS_NON_CALLEE_CLOBBERS
+ * ZipCPU --- default is good enough for us.
+ */
+
+/* 17.10 Implementing VARARGS MACROS */
+
+/* ...
+ */
+
+/* void TARGET_SETUP_INCOMING_VARARGS(A,M,T,I,S) ... This target hook offers an
+ * alternative to using __builtin_saveregs and defining the hook TARGET_EXPAND..
+ * _BUILTIN_SAVEREGS.  Use it to store the anonymous register arguments into the
+ * stack so that all the arguments appear to have been passed consecutively
+ * on the stack.  Once this is done, you can use the standard implementation
+ * of varargs that works for machines that pass all their arguments on the
+ * stack.
+ */
+// #undef	TARGET_SETUP_INCOMING_VARARGS
+// #define	TARGET_SETUP_INCOMING_VARARGS	zip_setup_incoming_varargs
+
+/* ...
+ */
+
+/* 17.11 Trampolines for Nested Functions */
+
+/* TARGET_ASM_TRAMPOLINE_TEMPLATE ... This hook is called by
+ * assemble_trampoline_template to output, on the stream f, assembler code for
+ * a block of data that contains the constant parts of a trampoline.  This code
+ * should not include a label--the label is taken care of automatically.
+ *
+ * ZipCPU -- looks like we need to do this.
+ */
+#undef	TARGET_ASM_TRAMPOLINE_TEMPLATE
+#define	TARGET_ASM_TRAMPOLINE_TEMPLATE	zip_asm_trampoline_template
+
+/* TRAMPOLINE_SECTION ... Return the section into which the trampoline template
+ * is to be placed.  The default value is readonly_data_section.
+ *
+ * ZipCPU--default should be good enough.
+ */
+
+/* TRAMPOLINE_SIZE ... A C expression for the size (in bytes) of the trampoline
+ * as an integer.
+ *
+ * ZipCPU--it's three instructions, or 96 bits.  However, 32-bits is our minimal
+ * addressible unit, so what size do we offer here?  We'll stick with the number
+ * of bytes, but we may need to change this later.
+ *
+ */
+// #warning "May need to redefine trampoline_size in words, not bytes"
+#undef	TRAMPOLINE_SIZE
+#define	TRAMPOLINE_SIZE	3
+
+/* TRAMPOLINE_ALIGNMENT ... alignment required for trampolines, in bits.
+ *
+ * Well that's well known in ZipCPU --- 32-bits.
+ */
+#undef	TRAMPOLINE_ALIGNMENT
+#define	TRAMPOLINE_ALIGNMENT	32
+
+/* void TARGET_TRAMPOLINE_INIT(RTX,TREE,RTX CH) ... This hook is called to
+ * initialize a trampoline.  m_tramp is an RTX for the memory block for the
+ * trampoline; TREE is the FUNCTION_DECL for the nested fucntion;  CH is an
+ * rtx for the static chain value that should be passed to the function when
+ * it is called.
+ *
+ * ZipCPU ... Can we get by without this?
+ */
+#undef	TARGET_TRAMPOLINE_INIT
+#define	TARGET_TRAMPOLINE_INIT	zip_trampoline_init
+
+/* TARGET_TRAMPOLINE_ADJUST_ADDRESS(RTX) ... This hook should perform any
+ * machine-specific adjustment in the address of the trampoline.  Its argument
+ * contains the address of the memory block that was passed to
+ * TARGET_TRAMPOLINE_INIT.  In case the address to be used for a function call
+ * should be different from the address at which the template was stored, the
+ * different address should be returned; otherwise addr should be returned 
+ * unchanged.  If the hook is not defined, RTX (addr) will be used for function
+ * calls.
+ * 
+ * ZipCPU--works for us!
+ */
+
+/* CLEAR_INSN_CACHE(BEG,END) ... If defined, expands to a C expression clearing
+ * the instruction cache in the specified interval.  The definition of this
+ * macro would typically be a series of asm statements.   Both BEG and END are
+ * pointer expressions.
+ *
+ * ZipCPU --- Ouch!  We have no way to do this (yet)!
+ */
+
+/* TRANSFER_FROM_TRAMPOLINE ... Define this macro is trampolines need a special
+ * subroutine to do their work.  The macro should expand to a series of asm
+ * statements which will be compiled with GCC.  They go in a library function
+ * named __transfer_from_trampoline.
+ *
+ * We may need to rethink trampolines on ZipCPU.
+ */
+
+
+/* 17.12 Implicit Calls to Library Routines */
+
+/* DECLARE_LIBRARY_RENAMES
+ *
+ * ZipCPU: Don't need it.
+ */
+
+/* TARGET_INIT_LIBFUNCS(VOID) ... This hook should declare additional library
+ * routines or rename existing ones, using the functions set_optab_libfunc and
+ * init_one_libfunc defined in optabs.c.  init_optabs calls this macro after
+ * initializing all the normal library routines.
+ *
+ * Most ports don't need to define this hook, so we won't either.
+ */
+
+/* TARGET_LIBFUNC_GNU_PREFIX ... If false (the default), internal library
+ * routines start with two underscores.  If set to true, these routines start
+ * with __gnu_ instead.
+ *
+ * ZipCPU: No change necessary.
+ */
+
+/* FLOAT_LIB_COMPARE_RETURNS_BOOL(MODE,COMPARISON) ... This macro should return
+ * true if the library routine that implements the floating point comparison
+ * operator comparison in mode mode will return a boolean and false if it will
+ * return a tristate.  
+ *
+ * Most ports don't need to define this macro, so Zip CPU won't either.
+ */
+
+/* TARGET_HAS_NO_HW_DIVIDE ... This macro should be defined if the target has no
+ * hardware divide instructions.  If this macro is defined, GCC will use an
+ * algorithm which makes use of simple logical and arithmetic operations for
+ * 64-bit division.  If the macro is not defined, GCC will use an algorithm
+ * which makes use of a 64-bit by 32-bit divide primitive.
+ *
+ * Zip CPU, though, doesn't have the 64-bit by 32-bit divide primitive, thus
+ * we have no HW DIVIDE (for now).
+ */
+#define	TARGET_HAS_NO_HW_DIVIDE
+
+/* TARGET_EDOM ... The value of EDOM on the target machine, as a C integer 
+ * expression.  If you don't define this macro, GCC does not attempt to deposit
+ * the value of EDOM into errno directly.  Look in /usr/include/errno.h to find
+ * the value of EDOM on your system.
+ *
+ * EDOM is the error created when a math argument is out of the domain of the
+ * function.
+ *
+ * ZipCPU: Don't need it---I don't think.
+ */
+
+/* GEN_ERRNO_RTX ... Define this macro as a C exrpession to create an rtl
+ * expression that refers to the global "variable" errno.  (On certain
+ * systems, errno may not actually be a variable.)  If you don't define this
+ * macro, a reasonable default is used.
+ *
+ * ZipCPU --- if a reasonable default is used, we'll use that--especially since
+ * I doubt we'll be using errno for a while.
+ */
+
+/* NEXT_OBJC_RUNTIME ... Set this macro to 1 to use the "NeXT" Objective-C
+ * message sending conventions by default.  This calling convention involves
+ * passing the object, the selector and the method arguments all at once to the
+ * method-lookup library function.  This is the usual setting when targetting
+ * Darwin/Mac OS X systems, which have the NeXT runtime installed.
+ *
+ * If the macro is set to 0, ...
+ * 
+ * Doesn't look relevant (yet) for the Zip CPU--especially since we don't have
+ * an O/S yet.
+ */
+
+
+
+/* 17.13 Addressing Modes */
+
+/* C expressions that are nonzero if the machine supports pre-increment,
+ * pre-decrement, post-increment, or post-decrement addressing respectively.
+ */
+#define	HAVE_PRE_INCREMENT	(0)
+#define	HAVE_PRE_DECREMENT	(0)
+#define	HAVE_POST_INCREMENT	(0)
+#define	HAVE_POST_DECREMENT	(0)
+
+/* C expression that is nonzero if the machine supports pre- or post- address
+ * side-effect generation involving constants other than the size of the memory
+ * operand.
+ */
+#define	HAVE_PRE_MODIFY_DISP	(0)
+#define	HAVE_POST_MODIFY_DISP	(0)
+
+/* C expression that is non-zero if the machine supports pre- or post-address
+ * side-effect generation involving a register displacement.
+ */
+#define	HAVE_PRE_MODIFY_REG	(0)
+#define	HAVE_POST_MODIFY_REG	(0)
+
+/* CONSTANT_ADDRESS_P(X) ... A C expression that is 1 if the RTX X is a constant
+ * which is a valid address.  On most machines the default definition ... is
+ * acceptable, but a few machines are more restrictive as to which constant
+ * addresses are supported.
+ *
+ * Zip CPU is designed for offset addresses, not constant addresses.  Although
+ * the CPU will support 18-bit signed constant addresses, the assembler and
+ * general programming model do not.  Further, without knowing where the final
+ * address will be located, this is an unusable model.  Therefore we will
+ * define this as not supported.
+ *
+ * In hindsight, this isn't true--labels and symbols are valid addresses, and
+ * they are also constant addresses.  Hence, we leave this at its default.
+ */
+// #undef	CONSTANT_ADDRESS_P
+// #define	CONSTANT_ADDRESS_P(X)	(0)
+
+/* CONSTANT_P(X) ... CONSTANT_P, which is defined by target-independent code,
+ * accepts integer values expressions whose values are not explicitly known,
+ * such as symbol_ref, label_ref, and high expressions and const arithmetic
+ * expressions, in addition to const_int and const_double expressions.
+ *
+ * Huh???
+ */
+// #define CONSTANT_P(X) ???
+
+/* MAX_REGS_PER_ADDRESS ... A number, the maximum number of registers that can
+ * appear in a valid memory address.  Note that it is up to you to specify a 
+ * value equal to the maximum number that TARGET_LEGITIMATE_ADDRESS_P would
+ * ever accept.
+ */
+#define	MAX_REGS_PER_ADDRESS	1
+
+/* TARGET_LEGITIMATE_ADDRESS_P(MODE,RTX,STRICT) ... A function that returns
+ * whether RTX is a legitimate memory address on the target machine for a 
+ * memory operation of mode MODE.
+ */
+#undef TARGET_LEGITIMATE_ADDRESS_P
+#define TARGET_LEGITIMATE_ADDRESS_P	zip_legitimate_address_p
+
+/* TARGET_MEM_CONSTRAINT ... A single character to be used instead of the
+ * default 'm' character for general memory addresses.  This defines the
+ * constraint letter which matches the memory addresses accepted by
+ * TARGET_LEGITIMATE_ADDRESS_P.  Define this macro if you want to support new
+ * address format in your back end without changing the semantics of the 'm'
+ * constraint.  This is necessary in order to preserve functionality of inline
+ * assembly constructs using the 'm' constraint.
+ *
+ * ZipCPU--doesn't look like we need to define this at all.
+ */
+
+/* FIND_BASE_TERM(X) ... A C expression to determine the base term of address
+ * X or to provide a simplified version of X from which alias.c can easily find
+ * the base term.  This macro is used in only two places: find_base_value and
+ * find_base_term in alias.c.
+ *
+ * It is always safe for this macro  to not be defined.  It exists so that
+ * alias analysis can understand machine-dependent addresses.
+ *
+ * ZipCPU: We'll skip this then.
+ */
+
+/* TARGET_LEGITIMIZE_ADDRESS(RTX,OLD,MODE) ... This hook is given an invalid
+ * memory address RTX for an operand of mode MODE and should try to return a 
+ * valid memory address.  RTX will always be the result of a call to 
+ * break_out_memory_refs, and OLD will be the operand that was given to that
+ * function to produce RTX.
+ *
+ * ZipCPU -- 
+ */
+#undef	TARGET_LEGITIMIZE_ADDRESS
+#define	TARGET_LEGITIMIZE_ADDRESS	zip_legitimize_address
+
+/* LEGITIMIZE_RELOAD_ADDRESS(X,MODE,OP,TYPE,IND,WIN) ... A C compound statement
+ * that attempts to replace X, which is an address that needs reloading, with
+ * a valid memory address for an operand of mode MODE.  WIN will be a C
+ * statement label elsewhere in the code.  It is not necessary to define this
+ * macro, but it might be useful for performance reasons.
+ *
+ * ZipCPU: This is worth coming back to, according to the notes page, but it
+ * may also be a difficult macro to use.  Look at other implementations before
+ * we dive into this.
+ */
+// #undef LEGITIMIZE_RELOAD_ADDRESS
+// #define LEGITIMIZE_RELOAD_ADDRESS
+
+/* TARGET_MODE_DEPENDENT_ADDRESS_P(ADDR,SPACE) ... This hook returns true
+ * if memory address addr in address space addrspace can have different meanings
+ * depending on the machine mode of the memory reference it is used for or if
+ * the address is valid for some modes but not others.
+ */
+#undef TARGET_MODE_DEPENDENT_ADDRESS_P
+#define	TARGET_MODE_DEPENDENT_ADDRESS_P		zip_mode_dependent_address_p
+
+/* TARGET_LEGITIMATE_CONSTANT_P(MODE,RTX) ... This hook returns true if x is a
+ * legitimate constant for a MODE-mode immediate operand on the target machine.
+ * You can assume the RTX satisfies CONSTANT_P, so you need not check this.
+ * 
+ * The default definition returns true.
+ */
+
+/* TARGET_DELIGITIMIZE_ADDRESS(RTX)
+ */
+
+/* TARGET_CONST_NOT_OK_FOR_DEBUG_P(RTX) ... This hook should return true if RTX
+ * should not be emitted into debug sections.
+ */
+
+/* TARGET_CANNOT_FORCE_CONST_MEM(MODE,RTX) ... This hook should return true if
+ * RTX is a form that cannot (or should not) be spilled to the constant pool.
+ * MODE is the mode of X.  The default version returns false.
+ */
+// #define	TARGET_CANNOT_FORCE_CONST_MEM	hook_bool_mode_rtx_false
+
+/* TARGET_USE_BLOCKS_FOR_CONSTANT_P(MODE,RTX) ... This hook should return true
+ * if pool entries for constant RTX can be placed in an object_block structure.
+ * MODE is the mode of X.  The default version returns false for all constants.
+ *
+ *????
+ */
+// #warning "Huh?"
+
+/* TARGET_USE_BLOCKS_FOR_DECL_P(DECL) ... This hook should return true if pool
+ * entries for DECL should be placed in an object_block structure.  The default
+ * version returns true for all DECL's.
+ *
+ * Sounds good.
+ */
+
+/* TARGET_BUILTIN_RECIPROCAL(TREE) ... This hook should return the DECL of a
+ * function that implements the reciprocal of the machine specific builtin
+ * function fndecl, or NULL_TREE if such a function is not available.
+ */
+
+/* TARGET_VECTORIZE_BUILTIN_MASK_FOR_LOAD(VOID) ... This hook should return the
+ * DECL of a function f that given an address addr as an argument returns a mask
+ * m that can be used to extrract from two vectors the relevant data that
+ * resides in addr in case addr is not properly aligned.
+ *
+ * Zip CPU does not support vectorization.
+ */
+
+/* Other vector, SIMD, and GOACC macros skipped as Zip CPU doesn't support
+ * such data accesses and manipulation.
+ */
+
+/* 17.14 Anchored Addresses */
+
+/* TARGET_MIN_ANCHOR_OFFSET ... The minimum offset that should be applied to
+ * a section anchor.  On most targets, it should be the smallest offset that
+ * can be applied to a base register while still giving a legitimate address for
+ * every mode.  The default value is 0.
+ *
+ * On the Zip CPU, this is the minimum operand B offset to a LOD or STO
+ * operation, which would be a signed 14 bit number.
+ */
+#undef	TARGET_MIN_ANCHOR_OFFSET
+#define TARGET_MIN_ANCHOR_OFFSET	zip_min_anchor_offset
+
+/* TARGET_MAX_ANCHOR_OFFSET ... Like TARGET_MIN_ANCHOR_OFFSET, but the maximum
+ * (inclusive) offset that should be applied to section anchors.  The default
+ * value is 0.
+ */
+#undef	TARGET_MAX_ANCHOR_OFFSET
+#define TARGET_MAX_ANCHOR_OFFSET	zip_max_anchor_offset
+
+/* TARGET_ASM_OUTPUT_ANCHOR(RTX) ... Write the assembly code to define section
+ * anchor RTX, which is a SYMBOL_REF for which 'SYMBOL_REF_ANCHOR_P(RTL) is
+ * true.  The hook is called with the assembly output position set to the
+ * beginning of SYMBOL_REF_BLOCK(X).
+ *
+ * If ASM_OUTPUT_DEF is available, the hook's default definition uses it to
+ * define the symbol as '. + SYMBOL_REF_BLOCK_OFFSET(RTL)'.  If ASM_OUTPUT_DEF
+ * is not available, the hook's default definition is NULL, which disables the
+ * use of section anchors altogether.
+ *
+ * Section anchors will be very valuable in Zip CPU assembly, therefore we
+ * must define this hook.
+ */
+// #undef	TARGET_ASM_OUTPUT_ANCHOR
+// #define	TARGET_ASM_OUTPUT_ANCHOR	zip_asm_output_anchor
+
+/* TARGET_USE_ANCHORS_FOR_SYMBOL_P(RTX) ... Return true if GCC should attempt
+ * to use anchors to access SYMBOL_REF X.  You can assume SYMBOL_REF_HAS_BLOCK_INFO_P(X) and !SYMBOL_REF_ANCHOR_P(X).
+ *
+ * The default version is correct for most targets, but you might need to intercept this hook to handle things like target specific attributes or target-specific sections.
+ *
+ * Not knowing anything more, we'll leave the default as is for the Zip CPU.
+ */
+// #undef TARGET_USE_ANCHORS_FOR_SYMBOL_P
+// #define TARGET_USE_ANCHORS_FOR_SYMBOL_P	zip_use_anchors_for_symbol_p
+
+/* 17.15 Condition Code Status */
+
+/* 17.15.1 Representation of condition codes using (cc0) --- that's us */
+
+/* CC_STATUS_MDEP ... C code for a data type which is used for declaring
+ * the mdep component of cc_status.  It defaults to int.
+ *
+ * ZipCPU---Int is good for us.
+ */
+
+/* CC_STATUS_MDEP_INIT ... A C expression to initialize the mdep field to
+ * "empty".  The default definition does nothing, since most machines don't
+ * use the field anyway.  If you want to use the field, you should probably
+ * define  this macro to initialize it.
+ */
+
+/* NOTICE_UPDATE_CC(EXP, INSN) ... A C compound statement to set the components
+ * of cc_status appropriately for an insn insn whose body is exp.  It is this
+ * macro's responsibility to recognize insns that set the condition code as
+ * a byproduct of other activity as well as those that explicitly set (cc0).
+ *
+ * ZipCPU --- We need this, as not all expressions set (cc0).
+ *
+ */
+#define	NOTICE_UPDATE_CC(EXP, INSN)	zip_update_cc_notice(EXP, INSN)
+
+
+/* 17.15.2 Representation of condition codes using registers */
+/* ... which the ZipCPU doesn't have.  The ZipCPU has a CC0 register, and hence
+ * this section isn't supposed to apply.
+ */
+
+/* SELECT_CC_MODE(op, x, y)
+ */
+
+/* TARGET_CANONICALIZE_COMPARISON(int,rtx *, rtx *, bool) ... On some machines
+ * (such as the ZipCPU) not all possible comparisons are defined, but you can
+ * convert an invalid comparison into a valid one.  For example, the Alpha
+ * does not have a GT comparison, but you can use an LT comparison instead and
+ * swap the order of the operands.
+ *
+ * On such machines, implement this hook to do any required conversions:  code
+ * is the initial comparison code and op0 and op1 are the left and right
+ * operands of the comparison, respectively.  If op0_preserve_value is true the
+ * implementation is not allowed to change the value of op0 since the value 
+ * might be used in RTXs which aren't comparisons.  E.g. the implementation is
+ * not allowed to swap operands in that case.
+ *
+ * GCC will not assume that the comparison resulting from this macro is valid
+ * but will see if the resulting insn matches a pattern in the 'md' file.
+ *
+ * You need not implement this hook if it would never change the comparison
+ * code or operands.
+ *
+ * In the case of the ZipCPU, the ZipCPU only keeps track of 8 possible
+ * comparisons, and bastardizing other comparisons into those 8 is extremely
+ * painful.  Therefore, we *need* this capability to make certain we can use
+ * our comparisons successfully.
+ *
+ * The only problem is ... this hook appears to only be called on non-CC0
+ * machines.  Hence, defining it hasn't done anything for us.
+ */
+// #define	TARGET_CANONICALIZE_COMPARISON	zip_canonicalize_comparison
+
+/* 17.16 Relative costs of operations */
+
+
+// #define	REGISTER_MOVE_COST(MODE,FROM,TO)	((MODE==DImode)||(MODE==DFmode))?4:2
+// #define	TARGET_REGISTER_MOVE_COST
+// #define	MEMORY_MOVE_COST(MODE, CLASS, IN)	((MODE==DImode)||(MODE==DFmode))?8:7
+/* TARGET_REGISTER_MOVE_COST(M,FRM,TO) ... This target hook should return the
+ * cost of moving data of mode M from a register in class FRM to one in class
+ * TO.  The classes are expressed using the enumeration values such as 
+ * GENERAL_REGS.  A value of 2 is the default; other values are interpreted
+ * relative to that. 
+ *
+ * It is not required that the cost always equal 2 when FROM is the same as TO;
+ * on some machines it is expensive to move between registers if they are not
+ * general registers.
+ *
+ * If reload sees ...
+ *
+ * ZipCPU ... We can leave this at its default value of 2.
+ */
+
+/* TARGET_MEMORY_MOVE_COST(MOD,CL,IN) ... This target hook should return the 
+ * cost of moving data of mode MOD between a register of class CL and memory.
+ * IN is false if the value is to be written to memory, true if it is to be
+ * read in.  This cost is relative to those in TARGET_REGISTER_MOVE_COST.
+ * If moving between registers and memory is more expensive that between two
+ * registers, you should add this target hook to express the relative cost.
+ *
+ * If you do not add this target hook, GCC uses a default cost of 4 plus the
+ * cost of copying via a secondary reload register, if one is needed.  If your
+ * machine requires a secondary reload register to copy between memory and a
+ * register of CL but the reload mechanism is more complex than copying via
+ * an intermediate, use this target hook to reflect the actual cost of the
+ * move.
+ *
+ * ZipCPU --- Memory moves are more expensive than twice the cost of register
+ * moves, so let's make certain this is defined.
+ */
+#define	TARGET_MEMORY_MOVE_COST	zip_memory_move_cost
+
+// #warning "This needs to be double checked, and annotated"
+#define	BRANCH_COST(SPEED,PREDICTABLE)		((PREDICTABLE)?2:5)
+
+/* Define this macro as a C expression which is nonzero if accessing less than 
+ * a word of memory (i.e. a 'char' or a 'short') is no faster than accessing
+ * a word of memory.
+ */
+#define	SLOW_BYTE_ACCESS	1
+
+/* MOVE_RATIO(SPD) ... The threshold of number of scalar memory-to-memory move
+ * instructions, below which a sequence of instructions should be generated 
+ * instead of a string move instruction or a library call.  Increasing the
+ * value will always make code faster, but eventually incurs high cost in
+ * increased code size.
+ */
+#define	MOVE_RATIO(SPD)	5
+
+/* TARGET_USE_BY_PIECES_INFRASTRUCTURE_P(SZ,ALGN,OP,SPD) ...
+ */
+// #undef	TARGET_USE_BY_PIECES_INFRASTRUCTURE_P(S,A,OP,SPD)
+// #define	TARGET_USE_BY_PIECES_INFRASTRUCTURE_P(S,A,OP,SPD)// needs hook
+
+/* CLEAR_RATIO(SPD) ... The threshold number of scalar move instructions, below
+ * which a sequence of instructions should be generated to clear memory instead
+ * of a string clear instruction or a library call.  Increasing the value will
+ * always make the code faster, but eventually incurs high cost in increased
+ * code size.
+ */
+#define	CLEAR_RATIO(SPD)	MOVE_RATIO(SPD)
+
+/* NO_FUNCTION_CSE ... Define this macro to be true if it is as good or better
+ * to call a constant function address than to call an address kept in a 
+ * register.
+ * 
+ * On the Zip CPU, constant function addresses--especially relative ones,
+ * can be optimized into a single cycle delay.  Register jumps will always
+ * stall the whole (5-stage) pipeline.
+ */
+#define	NO_FUNCTION_CSE
+
+/* TARGET_RTX_COSTS(X,CODE,OUTER,OPNO,TOTAL,SPD) ... This target hook describes
+ * the relative costs of RTL expressions.
+ *
+ * The cost may depend on the precise form of the expression, which is avaialble
+ * for examination in X, and the fact that X appears as operand OPNO of an 
+ * expression with rtx code OUTER.  That is, the hook can assume that there is
+ * some RTX Y such that GET_CODE(Y)==OUTER and such that either (a) XEXP(Y,OPNO)
+ * == X or (b) XVEC(Y,OPNO) contains X.
+ *
+ * ...
+ * The hook returns true when all subexpressions of x have been processed and
+ * false when rtx_cost should recurse.
+ */
+
+/* TARGET_ADDRESS_COST(ADDR,MODE,AS, SPD) ... This hook computes the cost of an
+ * addressing mode that contains ADDR.  If not defined, the cost is computed
+ * from the ADDR expression and the TARGET_RTX_COST hook.  In cases where more
+ * than one form of an address is known, the form with the lowest cost will be
+ * used.  If multiple forms have the same, lowest, cost, the one that is the
+ * most complex will be used.
+ *
+ * ZipCPU really has only one address cost, the only type of address it
+ * supports.  Sure, index addressing would cost us more, but we don't support
+ * that so ... I think we're okay defining this as a constant.  Indeed, the
+ * docs state that, "On RISC amchines, all instructions normally have the same
+ * length and execution time.  Hence all addresses will have equal costs."
+ */
+#undef TARGET_ADDRESS_COST
+#define	TARGET_ADDRESS_COST	zip_address_cost
+
+
+/* TARGET_NO_SPECULATION_IN_DELAY_SLOTS_P ... This predicate controls the use 
+ * of the eager delay slot filler to disallow speculatively executed
+ * instructions being placed in delay slots.  Targets such as certain MIPS
+ * architectures posess both branches with and without delay slots.  As the
+ * eager delay slot filler can decrease performance, disabling it is beneficial
+ * when ordinary branches are available.  Use of delay slot branches filled
+ * using basic filler is often still desirable as the delay slot can hide a
+ * pipeline bubble.
+ */
+// How should Zip CPU define this--we have no delay slots.
+
+
+/* 17.17 Instruction Scheduler */
+
+#define	TARGET_SCHED_ISSUE_RATE	zip_sched_issue_rate
+
+/* 17.18 Dividing the Output into Sections */
+
+/* Switch to the text or data segment. */
+#define	TEXT_SECTION_ASM_OP	"\t.text"
+#define	DATA_SECTION_ASM_OP	"\t.data"
+
+// #undef	TARGET_LIBGCC_SDATA_SECTION
+// #define	TARGET_LIBGCC_SDATA_SECTION	".sdata"
+
+
+/* 17.19 Position Independent Code */
+
+#define	PIC_OFFSET_TABLE_REGNUM			zip_GOT
+#define	PIC_OFFSET_TABLE_REG_CALL_CLOBBERED	0
+// #define LEGITIMATE_PIC_OPERAND_P(X) should evaluate to X(GOT) only
+
+/* 17.20 Defining the Output Assembler Language */
+
+/* 17.20.4 Output and Generation of Labels */
+
+/* ASM_OUTPUT_LABEL
+ * ... A default definition of this macro is provided which is correct for 
+ * most systems.
+ */
+
+/* ASM_OUTPUT_FUNCTION_LABEL
+ * ... if not defined, then the function name is defined in the usual manner
+ * as a label.
+ */
+
+/* ASM_OUTPUT_INTERNAL_LABEL ... Identical to ASM_OUTPUT_LABEL, except that name
+ * is known to refer to a compiler-generated label.  The default definition
+ * uses assemble_name_raw, which is like assemble_name except that it is more
+ * efficient.
+ */
+
+/* SIZE_ASM_OP ... A C string containing the appropriate assembler directive
+ * to specify the size of a symbol, without any arguments.  ON systems that
+ * use ELF, the dfault is "\t.size\t"; on other systems, the default is not to
+ * define this macro.
+ *
+ * Define this amcro only if it is correct to use the default definitions of
+ * ASM_OUTPUT_SIZE_DERECTIVE and ASM_OUTPUT_MEASURED_SIZE for your system.
+ * If you need your own custom definitions of those macros, or if you do not
+ * need explicit symbol sizes at all, do not define this macro.
+ */
+
+/* ASM_OUTPUT_SIZE_DIRECTIVE
+ * ASM_OUTPUT_MEASURED_SIZE
+ */
+
+/* NO_DOLLAR_IN_LABEL ... Define this macro if the assembler does not accept
+ * the character '$' in label names.  By default constructors and destructors
+ * in G++ have "$" in the identifiers.  If this label is defined, '.' is
+ * used instead.
+ */
+
+/* NO_DOT_IN_LABEL ... Define this macro if the assembler does not accept the
+ * character '.' in label names.  By default constructors and destructors in
+ * G++ have names that use '.'.  If this macro is defined, these names are
+ * rewritten to avoid '.'.
+ */
+
+/* TYPE_ASM_OP ... A C string containing the appropriate assembler directive to
+ * specify the type of a symbol, without any arguments.  On systems that use
+ * ELF the default in config/elfos.h is "\t.type\t"; on other systems, the default is not to define this macro.
+ *
+ * Define this macro only if it is correct to use the default definition of
+ * ASM_OUTPUT_TYPE_DIRECTIVE forr your system.  If you need your own custom
+ * definition of this macr, or if you do not need explicit symbol types at all,
+ * do not define this macro.
+ */
+
+/* TYPE OPERAND_FMD ... A 
+ */
+
+/* ASM_OUTPUT_TYPE_DIRECTIVE
+ */
+
+/* ASM_DECLARE_FUNCTION_NAME(STREAM, NAME, DECL) ... 
+ * if this macro is not defined, then the function name is defined in the usual
+ * manner as a label (by means of ASM_OUTPUT_FUNCTION_LABEL).
+ */
+
+/* ASM_DECLARE_FUNCTION_SIZE
+ * ASM_DECLARE_COLD_FUNCTION_NAME
+ * ASM_DECLARE_COLD_FUNCTION_SIZE
+ * ASM_DECLARE_OBJECT_NAME
+ * TARGET_ASM_DECLARE_CONSTANT_NAME
+ */
+/* ASM_DECLARE_REGISTER_GLOBAL(STREAM, DECL, REGNO, NAME) ... A C statement
+ * (sans semicolon) to output to the stdio stream STREAM any text necessary for
+ * claiming a register REGNO for a global variable DECL with name NAME.
+ *
+ * If you don't defin this macro, that is equivalent to dfining it to do
+ * nothing.
+ */
+
+/* ASM_FINISH_DECLARE_OBJECT
+ * TARGET_ASM_GLOBALIZE_LABEL
+ * TARGET_ASM_GLOBALIZE_DECL_NAME
+ * TARGET_ASM_ASSEMBLE_UNDEFINED_DECL
+ * ASM_WEAKEN_LABEL
+ * ASM_WEAKEN_DECL
+ * ASM_OUTPUT_WEAKREF
+ * SUPPORTS_WEAK
+ * TARGET_SUPPORTS_WEAK
+ * MAKE_DECL_ONE_ONLY
+ * SUPPORTS_ONE_ONLY
+ * TARGTE_ASM_ASSEMBLE_VISIBILITY
+ * TARGET_WEAK_NOT_IN_ARCHIVE_TOC
+ * ASM_OUTPUT_EXTERNAL
+ * TARGET_ASM_EXTERNAL_LIBCALL
+ * TARGET_ASM_MARK_DECLPRESERVED
+ * ASM_OUTPUT_LABELREF
+ * TARGET_MANGLE_ASSEMBLER_NAME
+ * ASM_OUTPUT_SYMBOL_REF
+ * ASM_OUTPUT_LABEL_REF
+ * TARGET_ASM_INTERNAL_LABEL
+ * ASM_OUTPUT_DEBUG_LABEL
+ * ASM_GENERATE_INTERNAL_LABEL
+ * ASM_FORMAT_PRIVATE_NAME
+ */
+
+/* ASM_OUTPUT_DEF ... A C statement to output to the stdio stream STREAM
+ * assembler code which defines (equates) the symbol NAME to have the value
+ * VALUE.
+ *
+ * ZipCPU---So many other things that we need depend upon this, that we need
+ * to implement a non-default version.
+ */
+#define	ASM_OUTPUT_DEF	zip_asm_output_def
+
+/* ASM_OUTPUT_DEF_FROM_DECLS
+ * TARGET_DEFERRED_OUTPUT_DEFS
+ * ASM_OUTPUT_WEAK_ALIAS
+ * OBJ_GEN_METHOD_LABEL
+ */
+
+
+/* 17.20.7 Output of Assembler Instructions */
+
+#define	REGISTER_NAMES { "R0","R1","R2","R3","R4","R5","R6","R7","R8","R9", \
+	"R10","R11","R12","SP","CC","PC" }
+
+/* REGISTER_PREFIX	(Undefined by default)
+ * LOCAL_LABEL_PREFIX	(Undefined by default)
+ * USER_LABEL_PREFIX	defaults to "*"
+ * IMMEDIATE_PREFIX	(Undefined by default)
+ *
+ * If defined, C string expressions to be used for the '%R', '%L', '%U', and
+ * '%I' options of asm_fprintf (see 'final.c').  These are useful when a single
+ * 'md' file must support multiple assembler formats.  In that case, the various
+ * 'tm.h' files can define these macros differently.
+ */ 
+// #define	USER_LABEL_PREFIX	"*"
+
+/* Defining memory operand address formats is in this section. */
+
+/* 17.20.10 Assembler Commands for Alignment */
+
+/* JUMP_ALIGN(label) ... The alignment (log base 2) to put in front of label,
+ * which is a common destination of jumps and has no fallthru incoming
+ * edge.  This macro need not be defined if you don't want any special alignment
+ * to be done at such a time.  Most machine descriptions do not currently define
+ * this macro.  
+ *
+ * ZipCPU---The assembler should automatically deal with label alignment, so
+ * let's not do anything about it here.
+ */
+
+/* TARGET_ASM_JUMP_ALIGN_MAX_SKIP
+ */
+
+/* LABEL_ALIGN_AFTER_BARRIER
+ * TARGET_ASM_LABEL_ALIGN_AFTER_BARRIER_MAX_SKIP
+ */
+
+/* LOOP_ALIGN(label)
+ * TARGET_ASM_LOOP_ALIGN_MAX_SKIP
+ * LABEL_ALIGN
+ * TARGET_ASM_LABEL_ALIGN_MAX_SKIP
+ */
+
+/* ASM_OUTPUT_SKIP(STREAM, NBYTES) A C statement to output to the stdio
+ * stream an assembler instruction to advance the location counter by nbytes
+ * bytes.  
+ */
+
+/* TARGET_ASM_LABEL_ALIGN */
+/* Assembler Commands for Alignment */
+#define	ASM_OUTPUT_ALIGN(STREAM,POWER)	\
+		{ int pwr = POWER; fprintf(STREAM, "\t.p2align %d\n", (pwr<2)?2:pwr); }
+
+
+
+/* 17.21 Controlling Debugging Information Format */
+/* 17.22 Cross Compilation and Floating Point */
+
+// REAL_VALUE_TYPE
+// REAL_VALUES_EQUAL
+// REAL_VALUES_LESS ... Tess whether x is less than y
+/* REAL_VALUE_FIX ... Truncates x to an unsigned integer, rouding toward zero.
+ * If x is negative, returns zero.
+ */
+// REAL_VALUE_ATOF
+// REAL_VALUE_NEGATIVE
+// REAL_VALUE_ISINF
+// REAL_VALUE_ISNAN
+/* REAL_ARITHMETIC(OUT,CODE,X,Y) ... (Macro) Calculates an arithmetic operation
+ * on two floating point values X and Y, storing the result in OUT (which must
+ * be a variable).
+ *
+ * The operation to be performed is specified by CODE.  Only the following
+ * codes are supported: PLUS_EXPR, MINUS_EXPR, MULT_EXPR, RDIV_EXPR, MAX_EXPR,
+ * MIN_EXPR.
+ *
+ * If REAL_ARITHMETIC is asked to evaluate division by zero and the target's
+ * floating point format cannot represent infinity, it will call abort().  
+ * Callers shoudl check for this situation first, using MODE_HAS_INFINITIES.
+ */
+/* REAL_VALUE_NEGATE(X) ... [Macro] Returns the negative of the floating point 
+ * value X.
+ */
+/* REAL_VALUE_ABS(X) ... [Macro] Returns the absolute value of X.
+ */
+/* 17.23 Mode switching instructions */
+/* 17.24 Defining target-specific uses of __attribute__ */
+#undef	TARGET_OPTION_OVERRIDE
+#define	TARGET_OPTION_OVERRIDE	zip_override_options
+
+/* 17.25 Emulating TLS */
+/* 17.26 Defining coprocessor specifics for MIPS targets*/
+
+ // ZipCPU isn't MIPS.
+
+/* 17.27 Parameters for Precompiled Header Validity Checking */
+/* 17.28 C++ ABI parameters */
+/* 17.29 Adding support for named address spaces */
+/* 17.30 Miscellaneous Parameters */
+
+/* HAS_LONG_COND_BRANCH ... Define this boolean macro to indicate whether or
+ * not your architecture has conditional branches that can span all of memory.
+ * It is used in conjunction with an optimization that partitions hot and
+ * cold basic blocks into separate sections of the executable.  If this macro
+ * is set to false, gcc will convert any conditional branches that attempt to
+ * cross between sections into unconditional branches or indirect jumps.
+ *
+ * ZipCPU --- The assembler renders long unconditional branch code without
+ * problems, so we can pretend that such long branches exist.
+ */
+#define	HAS_LONG_COND_BRANCH true
+
+/* HAS_LONG_UNCOND_BRANCH ... Define this boolean macro to indicate whether
+ * or not your architecture has unconditional branches that can span all of 
+ * memory.  (ZipCPU does ... via the LOD (PC),PC instruction.)  It is used in
+ * conjunction with an optimization that partitions hot and cold basic blocks
+ * into separate sections of the executable.  If this macro is set to false,
+ * gcc will convert any unconditional branches that attempt to cross between
+ * sections into indirect jumps.
+ *
+ * ZipCPU has the LOD (PC),PC instruction which can be used to implement a long
+ * jump.
+ */
+#define	HAS_LONG_UNCOND_BRANCH	true
+
+/* CASE_VECTOR_MODE ... An alias for a machine mode name.  This is the machine
+ * mode that eleemnts of a jump-table should have.
+ *
+ */
+#define	CASE_VECTOR_MODE	SImode
+
+/* CASE_VECTOR_SHORTEN_MODE(MIN,MAX,BODY) ... Optional: return the preferred
+ * mode for an addr_diff_vec when the minimum and maximum offset are known.
+ * If you define this, it enables extra code in branch shortening to deal with
+ * addr_diff_vec.  To make this work, you also have to define INSN_ALIGN and
+ * make the alignment for addr_diff_vec explicit.  The body argument is provided so that the offset_unsigned and scale flags can be updated.
+ *
+ * ZipCPU---No advantage here.
+ */
+
+/* CASE_VECTOR_PC_RELATIVE ... Define this exrpession to indicate when
+ * jump-tables should contain relative addresses.  You need not define this
+ * macro if jump-tables never contain relative addresses, or jump-tables
+ * should contain relative addresses only when -fPIC or -FPIC is in effect.
+ *
+ * ZipCPU---No advantage in PC-Relative jump tables--except in PIC relative
+ * code.
+ */
+
+/* TARGET_CASE_VALUES_THRESHOLD(VOID) ... This function returns the smallest 
+ * number of different values for which it is best to use a jump-table instead
+ * of a tree of conditional branches.  The default is four for machines with a
+ * casesi instruction and five otherwise.  This is best for most machines.
+ *
+ * ZipCPU---Leave at the default.
+ */
+
+/* WORD_REGISTER_OPERATIONS ... Define this macro to 1 if operations between
+ * registers with integral mode smaller than a word are always performed on the
+ * entire register.  Most RISC machines have this property and most CISC
+ * machines do not.
+ *
+ * ZipCPU---We have the property, 'cause we're fairly risk.
+ */
+#undef	WORD_REGISTER_OPERATIONS
+#define	WORD_REGISTER_OPERATIONS	1
+
+/* LOAD_EXTEND_OP(MEMODE) ... Define this macro to be a C expression indicating
+ * when insns that read memory in MEMMODE, an integral mode narrower than a
+ * word, set the bits outside of MEMMODE to be either the sign extension or
+ * zero-extension of the data read.  Return SIGN_EXTEND for values of MEMMODE
+ * for which the insn sign-extends, ZERO_EXTEND for which it zero-extends, and
+ * UNKNOWN for other modes.
+ * 
+ * Do not define this macro if it would always return UNKNOWN.  
+ *
+ * ZipCPU---This should be irrelevant, so we leave it undefined.
+ */
+#undef	LOAD_EXTEND_OP
+#define	LOAD_EXTEND_OP(MEM)	SIGN_EXTEND
+
+/* SHORT_IMMEDIATES_SIGN_EXTEND ... Define this macro to 1 if loading short immediate values into registers sign extends.
+ *
+ * ZipCPU---All immediates are sign extended, so yes.
+ */
+#undef	SHORT_IMMEDIATES_SIGN_EXTEND
+#define	SHORT_IMMEDIATES_SIGN_EXTEND	1
+
+/* TARGET_MIN_DIVISIONS_FOR_RECIP_MUL
+ */
+
+/* MOVE_MAX ... The maximum number of bytes that a single instruction can move
+ * quickly between memory and registers or between two memory locations.
+ *
+ * ZipCPU --- Although we can move 32-bits at a time, and most people would call
+ * this 4-bytes, the compiler defines a byte as the minimum addressable unit.
+ * Therefore, this is defined to be one.
+ */
+#define	MOVE_MAX	1
+
+/* MAX_MOVE_MAX ... The maximum number of bytes that a single instruction can
+ * move quickly between memory and registers or between two memory ...
+ *
+ * ZipCPU --- this sounds just the same as MOVE_MAX, which is the default
+ * definition of this.
+ */
+
+/* SHIFT_COUNT_TRUNCATED ... A C expression that is nonzero if on this machine
+ * the number of bits actually used for the count of a shift operation is equal
+ * to the number of bits needed to represent the size of the object being
+ * shifted.  
+ *
+ * You need not define this macro if it would have the value of zero.
+ *
+ * ZipCPU---A shift of 33 (or more) in either direction will wipe out the
+ * value in the register, therefore this value should be zero, the default.
+ */
+
+/* TARGET_SHIFT_TRUNCATION_MASK(MODE) ... This function describes how the
+ * standard shift patterns for MODE deal with shifts by negative amounts or by
+ * more than the width of the mode.  
+ *
+ * ZipCPU---The default is zero, since we didn't define SHIFT_COUNT_TRUNCATED.
+ * This is the case for the ZipCPU as well.
+ */
+
+/* TRULY_NOOP_TRUNCATION(OUTPREC,INPREC) ... A C expression which is nonzero
+ * if on this machine it is safe to "convert" an integer of INPREC bits to one
+ * of OUTPREC bits (where OUTPREC is smaller than INPREC) by merely operating on
+ * it as if it had OUTPREC bist.  On many machines, this expression can be 1.
+ * 
+ * ZiPCPU ... If both values are 32-bit, what conversion takes place?  If one is
+ * 64-bit and the other 32-bit ... I suppose it would then be safe.
+ */
+#undef	TRULY_NOOP_TRUNCATION
+#define TRULY_NOOP_TRUNCATION(O,I)	1
+
+/* TARGET_MODE_REP_EXTENDED(MODE,REPMODE) ... The representation of an integral
+ * mode can be such that the values are always extended to a wider integral
+ * mode.  Return SIGN_EXTEND if values of MODE are represented in sign-extended
+ * form to REPMODE.  Return UNKNOWN otherwise.  (Currently none of the targets
+ * use zero-extended.  
+ *
+ */
+// #undef	TARGET_MODE_REP_EXTENDED
+// #define	TARGET_MODE_REP_EXTENDED(R,M)	SIGN_EXTEND
+
+/* STORE_FLAG_VALUE ... A C expression describing the value returned by a
+ * comparison operator with an integral mode and stored by a store-flag
+ * instruction (cstoremode4) when the condition is true.  This description
+ * must apply to all the cstoremode4 patterns and all the comparison operators
+ * whose results have MODE_INT mode.
+ *
+ * ZipCPU---Doesn't really have a STORE_FLAG_VALUE instruction ...
+ */
+
+/* FLOAT_STORE_FLAG_VALUE
+ *
+ * ZipCPU
+ */
+
+/* VECTOR_STORE_FLAG_VALUE ... define this macro on machines that have vector
+ * comparison operations that return a vector result ...
+ *
+ * ZipCPU---Doesn't support vector operations.
+ */
+
+/* CLZ_DEFINED_VALUE_AT_ZERO(MODE, VAL)
+ * CTZ_DEFINED_VALUE_AT_ZERO(MODE, VAL)
+ *
+ * A C expression that indicates whetther the architecture defines a value for
+ * clz or ctz with a zero operand.  A result of 0 indicates the value is
+ * undefined.  If the value is defined for only the RTL expression, the macro should evaluate to 1.  If the value also applies to the corresponding optab
+ * entry, then the macro should evaluate to 2.  In cases where the value is
+ * defined, value should be set to this value.
+ * If this macro is not defined, the value of clz or ctz at zero is assumed to 
+ * be undefined.
+ *
+ * ZipCPU---Has neither clz nor ctz instructions, so we don't need this.
+ */
+
+/* Pmode ... An alias for the machine mode for pointers.  On most machines, 
+ * define this to be the integer mode corresponding to the width of a 
+ * hardware pointer.  SImode on 32-bits machines, or DImode on 64-bit machines.
+ * On some machines you must define this to be one of the partial
+ * integer modes, such as PSImode.
+ */
+#undef	Pmode
+#define	Pmode	SImode
+
+/* FUNCTION_MODE ... An alais for the machine mode used for memory references to
+ * function being called, in call RTL expressions.  On most CISC machines, where
+ * an instruction can begin at any byte address, this should be QImode.  On most
+ * RISC machines, where all instructions have fixed size and alignment, this
+ * should be a mode with the same size and alignment as the machine instruction
+ * words--typically SImode or HImode.
+ *
+ * ZipCPU---Definitely SImode, as with Pmode.  (All words are 32-bits, including
+ * addresses on the ZipCPU.
+ */
+#undef	FUNCTION_MODE
+#define	FUNCTION_MODE	SImode
+
+/* STDC_0_IN_SYSTEM_HEADERS
+ */
+
+/* TARGET_C_PREINCLUDE(V) ... Define this hook to return the name of  a header
+ * file to be included at the start of all compilations, as if it had been
+ * included with #include <file>.  If this hook returns NULL, or is not defined,
+ * or if the header is not found, or if the user specifies -ffreestanding or
+ * -nostdinc, no header is included.
+ *
+ * ZipCPU --- We don't have a standard library defined yet, so we'll leave this
+ * as NULL.
+ */
+#undef	TARGET_C_PREINCLUDE
+#define	TARGET_C_PREINCLUDE	NULL
+
+/* TARGET_CXX_IMPLICIT_EXTERN_C(CONST CHAR *) ... Define this hook to add target
+ * specific C++ implicit extern C functions.  If this function returns true
+ * for the name of a file-scope function, that function implicitly gets extern
+ * "C" linkage rather than whatever linkage the declaration would normally have.
+ * An example of such function is WinMain on Win32 targets.
+ *
+ * ZipCPU---Not ready to deal with this yet.
+ */
+
+/* NO_IMPLICIT_EXTERN_C ... Define this macro if the system header files
+ * support C++ as well as C.  This macro inhibits the usual method of using
+ * system header files in C++, which is to pretend that the file's contents
+ * are enclosed in 'extern "C" {...}'.
+ *
+ *
+ * ZipCPU --- Don't have either C or C++ headers, so let's skip this for now.
+ * Eventually, though, I think ZipCPU and C++ would go very well together.
+ */
+
+/* REGISTER_TARGET_PRAGMAS ... Define this macro if you want to implement any
+ * target specific pragmas.
+ *
+ * ZipCPU --- let's not.
+ */
+
+/* HANDLE_PRAGMA_PACK_WITH_EXPANSION ... Define this macro if macros should be
+ * expanded in the arguments of #pragma pack().
+ *
+ * ZipCPU ... why?
+ */
+
+/* TARGET_DEFAULT_PACK_STRUCT ... If your target requires a struct packing
+ * default other than 0 (meaning the machine default), define this macro to
+ * the necessary value (in bytes).  This must be a value that would also be
+ * valid to use with #pragma pack() (that is a small power of two.
+ */
+
+/* DOLLARS_IN_IDENTIFIERS
+ * ZipCPU --- Default (not changing C)
+ */
+
+/* INSN_SETS_ARE_DELAYED(INSN) ... Define this macro as a C expression that
+ * is nonzero if it is safe for the delay slot schedule to place instructions
+ * in the delay slot of INSN, even if they appear to use a resource set or
+ * clobbered in INSN.  INSN is always a ...
+ *
+ * ZipCPU --- You need not define this macro if it would always return zero.
+ */
+ 
+/* INSN_REFERENCES_ARE_DELAYED(INSN) ... Define this macro as a C expression
+ * that is nonzero if it is safe for the delay slot schedule to place
+ * instructions in the delay slot of INSN, even if they appear to set or clobber
+ * a resource referenced in INSN.  INSN is always a jump_insn or an insn.  On
+ * machines where some insn or jump_insn is really a function call and ...
+ *
+ * ZipCPU --- You need not define this macro if it would always return zero.
+ */
+
+/* MULTIPLE_SYMBOL_SPACES ... Define this macro as a C expression that is
+ * nonzero if, in some cases, global symbols from one translation unit may not
+ * be bound to undefined symbols in another translation unit without user
+ * intervention.  For instance, under Microsoft Windows symbols must be
+ * explicitly imported from shared libraries (DLLs).  
+ *
+ * ZipCPU---You need not define this macro if it would always evaluate to zero,
+ * so we won't.
+ */
+
+/* TARGET_MD_ASM_ADJUST
+ */
+/* MATH_LIBRARY ... Define this macro as a C constant ... you only need to
+ * define this macro if the default of "m" is wrong.
+ *
+ * ZipCPU --- as we don't have a math library yet, building one such that "m"
+ * works doesn't sound like a problem.  Let's not define this.
+ */
+
+/* LIBRARY_PATH_ENV ... Define this as a C string constant for the environment
+ * variable that specifies where the linker should look for libraries.
+ *
+ * Just in case we want to add libraries for ZipCPU, let's place them in
+ * /usr/local/zip/lib, so as not to confuse them with our local systems 
+ * libraries.
+ */
+#define	LIBRARY_PATH_ENV	"/usr/local/zip/lib"
+
+/* TARGET_POSIX_IO ... Define this macro if the target supports the following
+ * POSIX file fucntions: access, mkdir, and file locking with fcntl/F_SETLKW.
+ *
+ * ZipCPU does not.
+ */
+
+/* MAX_CONDITIONAL_EXECUTE ... A C expression for the maximum number of 
+ * instructions to execute via conditional execution instructions instead of a 
+ * branch.  A value of BRANCH_COST+1 is the default if the machine does not use
+ * cc0 and 1 if it does use cc0.
+ *
+ * ZipCPU---This sounds good enough for the ZipCPU as well--as long as we have
+ * BRANCH_COST defined.  However, BRANCH_COST is defined as conditionally to
+ * something else, so let's keep looking into this.
+ */
+
+/* IFCVT_MODIFY_TESTS(CEINFO,TRUE,FALSE) ... Used if the target needs to 
+ * perform machine-dependent modifications on the conditionals used for turning
+ * basic blocks into conditionally executed code.  CEINFO points to a data
+ * structure, struct ce_if_block, which contains information about the currently
+ * processed blocks.  TRUE and FALSE are the tests that are used for
+ * converting the then-block and the else-block, respectively.  Set either TRUE
+ * or FALSE to a null pointer if the tests cannot be converted.
+ *
+ * ZipCPU --- I need to set this to properly take advantage of our conditional
+ * execution and conditional testing capabilities.
+ */
+// #warning "Need to come back to this."
+
+/* IFCVT_MODIFY_MULTIPLE_TESTS(CEINFO, BB, TRUE, FALSE) ... Like
+ * IFCVT_MODIFY_TESTS, but used when converting more complicated if-statements
+ * into conditions combined by and and or operations.  BB contains the basic
+ * block that contains the test that is currently being processed and about to
+ * be turned into a condition.
+ *
+ *
+ * ZipCPU --- I need to set this to properly take advantage of our conditional
+ * execution and conditional testing capabilities.
+ */
+// #warning "Need to come back to this."
+
+
+/* IFCVT_MODIFY_INSN(CEINFO, PATTERN, INSN) ... A C expression to modify the
+ * PATTERN of an INSN that is to be converted to conditional execution format.
+ * CEINFO points to a data structure, struct ce_if_block, which contains
+ * information about the currently processed blocks.
+ *
+ *
+ * ZipCPU --- I need to set this to properly take advantage of our conditional
+ * execution and conditional testing capabilities.
+ */
+// #warning "Need to come back to this."
+
+
+/* IFCVT_MODIFY_FINAL(CEINFO) ... A C expression to perform any final
+ * machine dependent modifications in converting code to conditional 
+ * execution.  The involved basic blocks can be found in struct ce_if_block
+ * structure pointed to be CEINFO.
+ *
+ *
+ * ZipCPU --- I need to set this to properly take advantage of our conditional
+ * execution and conditional testing capabilities.
+ */
+// #warning "Need to come back to this."
+
+
+/* IFCVT_MODIFY_CANCEL(CEINFO) ... A C expression to cancel any machine
+ * dependent modifications in converting code to conditional execution.  The
+ * involved basic blocks can be found in the struct ce_if_block structure that
+ * is pointed to by CEINFO.
+ *
+ *
+ * ZipCPU --- I need to set this to properly take advantage of our conditional
+ * execution and conditional testing capabilities.
+ */
+// #warning "Need to come back to this."
+
+
+/* IFCVT_MACHDEP_INIT(CEINFO) ... A C expression to initialize any machine
+ * specific data for if-conversion of the if-block in the CEINFO block structure
+ * that is pointed by CEINFO.
+ *
+ *
+ * ZipCPU --- I need to set this to properly take advantage of our conditional
+ * execution and conditional testing capabilities.
+ */
+// #warning "Need to come back to this."
+
+
+/* TARGET_MACHINE_DEPENDENT_REORG(VOID) ... If non-null, this hook performs a
+ * target specific pass over the instruction stream.  The compiler will run it
+ * at all optimization levels, just before the point at which it normally does
+ * delayed branch scheduling.  
+ *
+ * You need not implement the hook if it has nothing to do.
+ *
+ * ZipCPU---This may be part of a later upgrade, but shouldn't be needed to
+ * just get us started.
+ */
+
+
+/* TARGET_INIT_BUILTINS(VOID) ... Define this hook if you ahve any machine 
+ * specific builtin functions that need to be defined.  It should be a function
+ * that performs the necessary setup.  Machine specific builtin functions can be
+ * useful to expand special machine instructions that would otherwise not
+ * normally be generated because they have no equivalent in the source language.
+ *
+ * To create a built in function, call the function lang_hooks.builtin_function
+ * which is defined by the language front end.  You can use any type nodes
+ * set up by build_common_tree_nodes; only language front ends that use those
+ * two functions will call "TARGET_INIT_BUILTINS".
+ * 
+ * ZipCPU---We need to come back to this.  We should have several built-ins
+ * defined: rtu(), wait(), halt(), save_context(cstackregno), and 
+ * restore_context(cstackregno).
+ *
+ */
+#undef	TARGET_INIT_BUILTINS
+#define	TARGET_INIT_BUILTINS	zip_init_builtins
+
+/* TARGET_BUILTIN_DECL(CODE,INITP) ... Define this hook if you have any
+ * machine specific builtin functions that need to be defined.  It should be a
+ * function that returns the builtin function declaration for the builtin 
+ * function code code.  If there is no such builtin and it cannot be initialized
+ * at this time if INITP is true the function should return NULL_TREE.  If 
+ * CODE is out of range the fucntion should return error-mark_node.
+ *
+ * ZipCPU ... needs to be done, don't know how to do it yet.
+ */
+#undef	TARGET_BUILTIN_DECL
+#define	TARGET_BUILTIN_DECL	zip_builtin_decl
+
+
+/* TARGET_EXPAND_BUILTIN(TREE,TGT,SUB,MODE,IGNORE) ... Expand a call to a
+ * machine specific built-in function that was set up by TARGET_INIT_BUILTINS.
+ * TREE is the expression for the function call; the result should go to
+ * TGT if that is convenient, and have mode MODE if that is convenient.  SUB
+ * may be used as the target for computing one of EXP's operands.  IGNORE is
+ * non-zero if the value is to be ignored.  This function should return the
+ * result of the call to the built-in function. 
+ *
+ * ZipCPU ... needs to do it, just to get our special intrinsic functions
+ */
+#define	TARGET_EXPAND_BUILTIN	zip_expand_builtin
+
+
+/* TARGET_BUILTIN_CHKP_FUNCTION(FCODE) ... Allows the target to redefine
+ * builtin functions used by Pointer Bounds Checker for code instrumentation.
+ *
+ * ZipCPU --- not interested.
+ */
+/* TARGET_CHKP_BOUND_TYPE
+ * TARGET_CHKP_MAKE_BOUNDS_CONSTANT
+ * TARGET_CHKP_INITIALIZE_BOUNDS
+ *
+ * ZipCPU --- Same as last one.
+ */
+
+
+/* TARGET_RESOLVE_OVERLOADED_BUILTIN(LOC, FN, ARGS) ... Select a replacement
+ * for a machine specific built-in function that was set up by
+ * TARGET_INIT_BUILTINS.
+ * 
+ * ZipCPU --- If I go to the trouble to create a builtin, why would I want
+ * to then overload it?
+ */
+
+/* TARGET_FOLD_BUILTIN(FN,NARGS,ARGP,IGNORE) ... Fold a call to a machine
+ * specific built-in function that was set up by 'TARGET_INIT_BUILTINS'  FN
+ * is the declaration of the built-in function.  NARGS is the number of
+ * arguments passed to the function; the arguments themselves are pointed to by
+ * ARGP.  The result is another tree, valid for both GIMPLE and GENERIC,
+ * containing as simplified expression for the call's result.  If IGNORE is
+ * true the value will be ignored.
+ *
+ * ZipCPU --- You know, this and the previous couple sound like something
+ * whereby I might be able replace bit-reversal code with my bit reverse
+ * instruction.  That would be very useful, but not necessary to get me
+ * started.
+ */
+
+/* TARGET_GIMPLE_FOLD_BUILTIN
+ * TARGET_COMPARE_VERSION_PRIORITY
+ * TARGET_GET_FUNCTION_VERSIONS_DISPATCHER
+ * TARGET_GENERATE_VERSION_DISPATCHER_BODY
+ * TARGET_CAN_USE_DOLOOP_P
+ * TARGET_INVALID_WITHIN_DOOLOOP
+ * TARGET_LEGITIMATE_COMBINED_INSN
+ * TARGET_CAN_FOLLOW_JUMP
+ * TARGET_COMMUTATIVE_P
+ */
+
+/* TARGET_ALLOCATE_INITIAL_VALUE(REGNO)  ... When the initial value of a hard
+ * register has been copied in a pseudo register, it is often not necessary
+ * ...
+ */
+/* TARGET_UNSPEC_MAY_TRAP_P(RTX,FLAGS)  ... This target hook returns nonzero in
+ * RTX, un unspec or unspec_volatile operation, might cause a trap.  Targets
+ * can use this hook to enhance precision of analysis for unspec and
+ * unspec_volatile operations.  You may call may_trap_p_1 to analyze inner
+ * elements of RTX in which case flags should be passed along.
+ */
+
+/* TARGET_SET_CURRENT_FUNCTION(TREE)  The compiler invokes this hook whenever
+ * it changes its current function context (CFUN).  You can define this 
+ * function if the back end needs to perform any initialization or reset
+ * actions on a per-function basis.  For example, it may be used to implement
+ * function attributes that affect register usage or code generation patterns.
+ */
+
+/* TARGET_OBJECT_SUFFIX ... Define this macro to be a C string representing the
+ * suffix for object files on your target machine.  If you do not define this
+ * macro, GCC will use ".o" as the suffix for object files.
+ */
+#define	TARGET_OBJECT_SUFFIX	".o"
+
+/* TARGET_EXECUTABLE_SUFFIX
+ */
+#define	TARGET_EXECUTABLE_SUFFIX	""
+
+/* COLLECT_EXPORT_LIST ... If defined, collect2 will scan the individual object
+ * files specified on its command line and create an export list for the linker.
+ * Define this macro for systems like AIX, where the linker discards object
+ * files that are not referenced from main and uses export lists.
+ *
+ * ZipCPU --- shoudln't need this.
+ */
+
+/* MODIFY_JNI_METHOD_CALL(MDECL)  ... Define this macro to a C expression
+ * representing a variant of the method call mdecl, if Java Native Interface
+ * (JNI) methods must be invoked differently from other methods on your
+ * target.  For example, on 32-bit MSWindows, JNI methods must be invoked
+ * using the stdcall calling convention and this macro is then ...
+ *
+ * ZipCPU----Don't need this.  (yet)
+ */
+
+
+/* TARGET_CANNOT_MODIFY_JUMPS_P ... This target hook returns true past the
+ * point in which a new jump instructions could be created.  On machines that
+ * require a register for every jump such as the SHmedia ISA of SH5, this point
+ * would typically be reload, so thiss target hook should be defined to a 
+ * function such as:
+ *
+ * ZipCPU --- I don't get what this is for.
+ */
+
+/* TARGET_BRANCH_TARGET_REGISTER_CLASS ... This target hook returns a register
+ * class for which branch target register optimizations should be applied.  All
+ * registers in this class should be usable interchangably.  After reload,
+ * registers in this class will be re-allocated and loads will be hoisted out of
+ * loops and be subjected to inter-block scheduling.
+ *
+ * ZipCPU---GENERAL_REGS, but this should be a default already ...
+ */
+
+
+/* TARGET_BRANCH_TARGET_REGISTER_CALLEE_SAVED ...  Branch target register
+ * optimization will by default exclude callee-saved registers that are not
+ * already live during the current function.  If this target hook returns true,
+ * they will be included.  The target code must then make sure that all target
+ * registers in the class returned by TARGET_BRANCH_REGISTER_CLASS that might
+ * be saved are saaved.  
+ *
+ * ZipCPU---
+ */
+
+
+/* TARGET_HAVE_CONDITIONAL_EXECUTION(VOID) ... This target hook returns true
+ * if the target supports conditional execution.  This target hook is required
+ * only when the target has several different modes and they have different
+ * conditional execution capability, such as ARM.
+ *
+ * ZipCPU---Yes!  All instructions may be conditionally executed (except the
+ * long version load immediate ...)
+ */
+#define	TARGET_HAVE_CONDITIONAL_EXECUTION	hook_bool_void_true
+
+/* TARGET_GEN_CCMP_FIRST(PREP,GEN,CODE,OP0,OP1) .. This function prepares to
+ * emit a comparison instruction for the first compare in a sequence of
+ * conditional comparisons.  It returns an appropriate comparison with CC for
+ * passing to gen_ccmp_next or cbranch_optab.  The instructions to prepare the
+ * compare are saved in prep_seq and the compare instructions are saved in
+ * gen_seq.  They will be emitted when all the compares in the conditional
+ * comparison are generated without error.  CODE is the rtx_code of the compare
+ * for op0 and op1.
+ *
+ *
+ * ZipCPU---???
+ */
+
+/* TARGET_GEN_CCMP_NEXT(PREP,GEN,PREV,CMP,OP0,OP1,BITCODE) ... This function
+ * prepares to emit a conditional comparison within a sequence of conditional
+ * comparisons.  It returns an appropriate comparison with CC for passing to
+ * gen_ccmp_next or cbranch_optab.  The insn to prepare the compare are saved
+ * in prep_seq and the compare instructions are saved in gen_seq.  They will be
+ * emitted when all the compares in the conditional comparison are generated
+ * without error.  The pPREV expression is the result of a prior call to either
+ * gen_ccmp_first or gen_ccmp_next.  It may return NULL if the combination of
+ * PREV and this comparison is not supported, otherwise the result must be the
+ * appropriate for passing to gen_ccmp_next or cbranch_optab.  CODE is the RTX
+ * code of the compare for op0 and op1.  BITCODE is AND or IOR, which is the op
+ * on the compares.
+ * 
+ *
+ * ZipCPU --- ???
+ */
+
+/* TARGET_LOOP_UNROLL_ADJUST(NUNROLL, LOOP) ... This target hook returns a new
+ * value for the number of times loop should be unrolled.  The parameter NUNROLL
+ * is the number of times the loop is to be unrolled.  The parameter loop is a
+ * pointer to the loop, which is going to be checked for unrolling.  The target 
+ * hook is required only when the target has special constraints like maximum number of memory accesses.
+ *
+ *
+ * ZipCPU -- ???
+ */
+
+
+/* POWI_MAX_MULTS ... If defined, this macro is interpreted as a signed integer
+ * C expression that specifies the maximum number of floating point
+ * multiplications that should be emitted when expanding exponentiation by an
+ * integer constant inline.  When this value is defined, exponentiation
+ * requiring more than this number of multiplications is implemented by calling
+ * the system library's pow, powf, or powl routines.  The default value
+ places no upper bound on the multiplication count.
+ *
+ * ZipCPU---As we have no system library pow() routine (yet) ... we're not
+ * ready for this macro.
+ */
+
+
+/* TARGET_EXTRA_INCLUDES(SYSROOT, PFX, STDINC) ... This target hook should 
+ * register any extra include files for the target.  The parameter stdinc
+ * indicates if normal include files are present.  The parameter SYSROOT is the
+ * system root directory.  The parameter PFX is the prefix for the GCC
+ * directoiry.
+ *
+ *
+ * ZipCPU---None yet.
+ */
+
+/* TARGET_EXTRA_PRE_INCLUDES(SYSROOT, PFX, STDINC) ... This target hook should
+ * register any extrra include files for the target before any standard headers.
+ * The parameter stdinc indicates if normal include files are present.
+ *
+ * ZipCPU --- None.
+ */
+
+/* TARGET_OPTF(PATH) ... This target hook should register special include paths
+ * for the target.  The parameter path is the integer to register.  On Darwin
+ * systems, this is used for Framework includes, which have semantics that are
+ * different from -I.
+ *
+ *
+ * ZipCPU --- None.
+ */
+
+/* TARGET_USE_LOCAL_THUNK_ALIAS_P(FN) ... This target macro returns if it is 
+ * safe to use a local alias for a virtual function FN when constructing 
+ * thunks, false otherwise.  By default, the macro returns true for all 
+ * functions, if a target supports aliases (i.e. defines ASM_OUTPUT_DEF),
+ * false otherwise.
+ *
+ *
+ * ZipCPU --- ???
+ */
+// #warning "ASM_OUTPUT_DEF's definition has not been considered"
+
+
+/* TARGET_FORMAT_TYPES ... If defined, this macro is the name of a global 
+ * variable containing target-specific format checking information for the
+ * -Wformat option.  The default is to have no target-specific format checks.
+ *
+ * ZipCPU --- Default
+ */
+
+/* TARGET_N_FORMAT_TYPES
+ *
+ * ZipCPU --- Default
+ */
+
+/* TARGET_OVERRIDES_FORMAT_ATTRIBUTES ... If defined, this macro is the name of 
+ * a global variable containing target-specific format overrides for the 
+ * -Wformat option.  The default is to have no target specific format overrides.
+ *
+ * ZipCPU --- Default
+ */
+
+/* TARGET_OVERRIDEES_FORMAT_ATTRIBUTES
+ * TARGET_OVERRIDEES_FORMAT_ATTRIBUTES_COUNT
+ *
+ * If defined, the (first) macro is the name of a global variable containing
+ * target-specific format overrides for the -Wformat option.
+ */
+/* TARGET_OVERRIDES_FORMAT_INIT ... If defined, this macro specifies the
+ * optional initialization routine for target specific customizations of the 
+* system printf and scanf formatter settings.
+ */
+ 
+/* TARGET_INVALID_ARG_FOR_UNPROTOTYPED_FN(TLIST,FN,VAL) ... If defined, this
+ * macro returns the diagnostic message when it is illegal to pass an argument
+ * VAL to function FN with prototype TLIST.
+ *
+ * ZipCPU---Default.
+ */
+
+/* TARGET_INVALID_CONVERSION
+ * TARGET_INVALID_UNARY_OP
+ * TARGET_INVALID_BINARY_OP
+ * TARGET_INVALID_PARAMETER_TYPE
+ * TARGET_INVALID_RETURN_TYPE
+ * TARGET_PROMOTED_TYPE
+ * TARGET_CONVERT_TO_TYPE
+ * TARGET_USE_JCR_SECTION_TYPE
+ * OBJC_JBLEN
+ * LIBGCC2_UNWIND_ATTRIBUTE
+ * TARGET_UPDATE_STACK_BOUNDARY
+ * TARGET_GET_DRAP_RTX
+ * TARGET_ALLOCATE_STACK_SLOTS_FOR_ARGS
+ */
+/* TARGET_CONST_ANCHOR ... On some architectures it can take multiple
+ * instructions to synthesize a constant. If there is another constant already
+ * in a register that is close enough in value then it is preferable that the
+ * new constant is computed from the register using immediate addition or
+ * subtraction.  We accomplish this through CSE.  Besides the value of the
+ * constant we also add a lower and an upper constant anchor to the available
+ * expressions.  These are then queried when encountering new constants.  The
+ * anchors are computed by rounding the constant up and down to a multiple of
+ * the value of TARGET_CONST_ANCHOR.  TARGET_CONST_ANCHOR should be the maximum
+ * positive value accepted by immediate-add plus one.  We currently assume that
+ * the value of TARGET_CONST_ANCHOR is a poewr of 2.  For example, on MIPS, 
+ * where add-immediate takes a 16-bit signed value, TARGET_CONST_ANCHOR is set
+ * to 0x8000.  The default value is zero, which disables this optimization.
+ *
+ * ZipCPU---One of the great strengths of the ZipCPU ISA is its ability to 
+ * access registers plus immediates.  To use this, we *need* this capability.
+ * So, we define it here. (to 0x20000, or 2^17 because we can handle 18-bits of
+ * signed immediate offsets)
+ *
+ * On ZipCPU---2^17
+ */
+#define	TARGET_CONST_ANCHOR	zip_const_anchor
+
+/* TARGET_ASAN_SHADOW_OFFSET ... Return the offset bitwise ored into shifted
+ * address to get corresponding Address Sanitizer shadow memory address.  NULL
+ * if address Sanitizer is not supported by the target.
+ */
+#define	TARGET_ASAN_SHADOW_OFFSET	NULL
+
+/* TARGET_MEMMODEL_CHECK
+ */
+/* TARGET_ATOMIC_TEST_AND_SET_TRUEVAL ... This value should be set if the result
+ * written by atomic test and set is not exactly 1, i.e. the bool true.
+ */
+/* TARGET_HAS_IFUNC_P ... It returns true if the target supports GNU indirect
+ * functions.  The support includes the assembler, linker, and dynamic linker.
+ * The default value of this hook is based on target's libc.
+ */
+#define	TARGET_HAS_IFUNC_P	hook_bool_void_true
+
+/* TARGET_ATOMIC_ALIGN_FOR_MODE(MODE) ... If defined, this function returns
+ * an appropriate alignment in bits for an atomic object of machine mode
+ * MODE.  If 0 is returned then the default alignment for the specified mode
+ * is used.
+ * 
+ * ZipCPU---Both default and 2 would be valid.  We'll stick to the default.
+ */
+
+/* TARGET_ATOMIC_ASSIGN_EXPAND_FENV --- ISO C11 requires atomic compound 
+ * assignments that may raise floating-point exceptions to raise exceptions
+ * corresponding to the arithmetic operation whose result was successfully 
+ * stored in a compare-and-exchange sequence.  This requires code equivalent to
+ * calls to feholdexcept, feclearexcept and feupdateenv to be generated at
+ * appropriate points in the compare-and-exchange sequence.  This hook should
+ * set *hold to an expression equivalent 
+ *
+ * ZipCPU --- ???
+ */
+
+/* TARGET_RECORD_OFFLOAD_SYMBOL ... Used when offloaded functions are seen in
+ * the compilation unit and no named sections are available.  It is called once
+ * for each symbol that must be recorded in the offload function and variable
+ * table.
+ * 
+ * ZipCPU --- Offloaded functions?
+ */
+
+/* TARGET_OFFLOAD_OPTIONS
+ *
+ * ZipCPU---none defined
+ */
+
+/* TARGET_SUPPORTS_WIDE_INT ... On older ports, large integers are stored
+ * in CONST_DOUBLE rtl objects.  Newer ports define TARGET_SUPPORTS_WIDE_INT
+ * to be nonzero to indicate that large integers are stored in CONST_WIDE_INT
+ * rtl objects.  The CONST_WIDE_INT allows very large integer constants to be
+ * represented.  CONST_DOUBLE is limited to twice the size of the hosts
+ * HOST_WIDE_INT representation.
+ *
+ * ZipCPU---We don't need these yet, so this isn't yet relevant.  (These ints
+ * are wider than DImode ...)
+ */
+#define	TARGET_SUPPORTS_WIDE_INT	0
+
+
+/* Now, for the prototype functions ...*/
+// These have been moved to zip-protos.h
+
+// extern void zip_init_builtins(void);
+// extern void zip_asm_output_anchor(rtx x);
+// extern bool zip_legitimate_address_p(enum machine_mode mode, rtx x, bool string);
+// extern void zip_asm_trampoline_template(FILE *);
+// extern void zip_initial_elimination_offset(int from, int to);
+// extern void zip_print_operand(FILE *stream, rtx *x, int code);
+// extern void zip_print_operand_address(FILE *stream, rtx *x);
+// extern void zip_asm_output_def(FILE *s, const char *n, const char *v);
+// extern void zip_update_cc_notice(rtx exp, rtx_insn *insn);
+// extern	int zip_address_operand(rtx op);
+// extern	int zip_const_address_operand(rtx op);
+// extern void zip_expand_prologue(void);
+// extern void zip_expand_epilogue(void);
+// extern bool zip_gen_move_rtl(rtx, rtx);
+// extern bool zip_load_address_lod(rtx, rtx);
+// extern bool zip_load_address_sto(rtx, rtx);
+// extern void zip_print_operand(FILE *fp, rtx x, int code);
+// extern void zip_print_operand_address(FILE *fp, rtx x);
+// extern bool zip_use_return_insn(void);
+
+#define	UQQmode	USQmode
+#define	UHQmode	USQmode
+#define	UHAmode	USAmode
+#define	QQmode	SQmode
+#define	HQmode	SQmode
+#define	QImode	SImode
+#define	HImode	SImode
+#define	QAmode	SAmode
+#define	HAmode	SAmode
+
+#include "insn-modes.h"
+#include "zip-protos.h"
+
+#endif	/* GCC_ZIP_H */
+
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/zip/zip.md gcc-5.3.0-zip/gcc/config/zip/zip.md
--- gcc-5.3.0-original/gcc/config/zip/zip.md	1969-12-31 19:00:00.000000000 -0500
+++ gcc-5.3.0-zip/gcc/config/zip/zip.md	2016-03-24 21:23:15.776993706 -0400
@@ -0,0 +1,1963 @@
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Filename:	zip.md
+;;
+;; Project:	Zip CPU -- a small, lightweight, RISC CPU soft core
+;;
+;; Purpose:	This is the machine description of the Zip CPU as needed by the
+;;		GNU compiler collection (GCC).
+;;
+;;
+;; Creator:	Dan Gisselquist, Ph.D.
+;;		Gisselquist Technology, LLC
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Copyright (C) 2015, Gisselquist Technology, LLC
+;;
+;; This program is free software (firmware): you can redistribute it and/or
+;; modify it under the terms of  the GNU General Public License as published
+;; by the Free Software Foundation, either version 3 of the License, or (at
+;; your option) any later version.
+;;
+;; This program is distributed in the hope that it will be useful, but WITHOUT
+;; ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
+;; FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+;; for more details.
+;;
+;; License:	GPL, v3, as defined and found on www.gnu.org,
+;;		http://www.gnu.org/licenses/gpl.html
+;;
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;;
+;; - Immediate integer operand constraints
+;;	'I'	-2^22 ... 2^22-1, or -4194304 .. 4194303	(LDI insn)
+;;	'M'	-2^12 ... 2^12-1, or -4096 ... 4095		(MOV offset)
+;;	'N'	-2^14 ... 2^14-1, or -16384 ... 16383		(OpB offset)
+;;	'O'	-2^17 ... 2^17-1, or -131072 ... 131071		(OpB Immediate)
+;;	'R'	0...31						(Shift value)
+;; - Memory constraints
+;;	"Q"	Op-B capable references to memory
+;;	"S"	References to constant memory
+;; - Address constraints
+;;	"U"	Op-B capable address that references to memory
+;;	"T"	Constant memory addresses
+(define_constraint "M"
+  "An 13-bit signed immediate such as a MOV instruction can handle"
+  (and (match_code "const_int")
+       (match_test "(ival < 0x1000) && (ival >= -0x1000)")))
+(define_constraint "N"
+  "An 14-bit signed immediate offset such as an Op-B register offset"
+  (and (match_code "const_int")
+       (match_test "(ival < 0x2000) && (ival >= -0x2000)")))
+(define_constraint "O"
+  "An 18-bit signed immediate such as an Op-B Immediate can handle"
+  (and (match_code "const_int")
+       (match_test "(ival < 0x20000) && (ival >= -0x20000)")))
+(define_constraint "R"
+  "Bits that a value may be shifted"
+  (and (match_code "const_int")
+       (match_test "(ival < 32) && (ival >= 0)")))
+;;
+;
+;
+; Our builtin functions, by identifier
+;
+(define_constants
+	[(UNSPEC_RTU		1)
+	(UNSPEC_HALT		2)
+	(UNSPEC_IDLE		3)
+	(UNSPEC_SYSCALL		4)
+	(UNSPEC_SAVE_CONTEXT	5)
+	(UNSPEC_RESTORE_CONTEXT	6)
+	(UNSPEC_BITREV		7)
+	(UNSPEC_GETCC		8)
+	(UNSPEC_LDILO		9)
+	])
+;
+;
+; Registers by name
+(define_constants
+  [(RTN_REG		0)	; Return address register
+   (RTNV_REG		1)	; Subroutine return value register
+   (AP_REG		10)	; Hopefully never used
+   (GBL_REG		11)	; Hopefully never used, but just in case ...
+   (FP_REG		12)
+   (SP_REG		13)
+   (CC_REG		14)
+   (PC_REG		15)
+  ])
+;
+;
+;
+
+;; Predicates
+(define_predicate "zip_const_address_operand_p"
+	(match_code "symbol_ref,const,label_ref,code_label")
+{
+	return zip_const_address_operand(op);
+})
+
+(define_predicate "zip_address_operand_p"
+	(match_code "reg,plus")
+{
+	return zip_pd_opb_operand(op);
+})
+
+(define_predicate "zip_opb_operand_p"
+	(match_code "reg,plus,const_int")
+{
+	return zip_pd_opb_operand(op);
+})
+
+(define_predicate "zip_opb_single_operand_p"
+	(match_code "reg,const_int")
+{
+	return zip_pd_opb_operand(op);
+})
+
+(define_predicate "zip_mov_operand_p"
+	(match_code "reg,plus")
+{
+	return zip_pd_mov_operand(op);
+})
+
+(define_predicate "zip_memory_operand_p"
+	(match_code "mem")
+{
+	return zip_pd_opb_operand(XEXP(op,0));
+})
+
+(define_predicate "zip_imm_operand_p"
+	(match_code "const_int")
+{
+	return zip_pd_imm_operand(op);
+})
+
+(define_predicate "zip_mvimm_operand_p"
+	(match_code "const_int")
+{
+	return zip_pd_mvimm_operand(op);
+})
+
+(define_predicate "zip_movdst_operand_p"
+	(match_code "mem,reg,subreg")
+{
+	if (MEM_P(op)) // Check for valid store address
+		return zip_pd_opb_operand(XEXP(op,0));
+	return 1;
+})
+
+(define_predicate "zip_movsrc_operand_p"
+	(match_code "mem,reg,subreg,const_int,const,symbol_ref,label_ref,code_label")
+{
+	if (MEM_P(op))
+		return zip_pd_opb_operand(XEXP(op,0));
+	else if (GET_CODE(op)==PLUS)
+		return zip_pd_opb_operand(op);
+	return 1;
+})
+
+;; Constraints
+;
+(define_memory_constraint "S"
+	"Any memory referenced by a constant address, possibly unknown at compile time"
+	(and (match_code "mem")
+		(match_test "zip_ct_const_address_operand(XEXP(op,0))")))
+(define_memory_constraint "Q"
+	"Any memory addressed suitably for a load or store instruction"
+	(and (match_code "mem")
+		(match_test "zip_ct_address_operand(XEXP(op,0))")))
+(define_address_constraint "U"
+	"An address suitable for a load or store instruction"
+	(and (match_code "reg,plus")
+		(match_test "zip_ct_address_operand(op)")))
+(define_address_constraint "T"
+	"Any constant address, to include those made by symbols unknown at compile time"
+	(and (match_code "label_ref,code_label,symbol_ref,const")
+		(match_test "zip_ct_const_address_operand(op)")))
+;
+;
+;; Attributes
+;
+(define_attr "predicable"  "no,yes" (const_string "yes"))
+(define_attr "conditional" "no,yes" (const_string "no"))
+(define_attr "ccresult" "set,unknown,unchanged,validzn" (const_string "set"))
+;
+; Mode attributes
+; (define_mode_iterator ZI [QI HI SI])
+; (define_mode_attr zipa [(QI "") (HI "") (SI "")])
+(define_mode_iterator ZI [SI])
+(define_mode_attr zipa [(SI "")])
+;
+;
+;
+;; Instructions
+;
+; (define_insn
+;	optional name
+;	RTL template -- a vector of incomplete RTL expressions describing the
+;		semantics of the instruction.  It is incomplete because it may
+;		contain match_operand, match_operator, and match_dup expressions
+;	The condition --- contains a C expression, may be an empty string
+;	output template or output statement--fragment of C code returning a str
+;	Attributes -- 
+;	)
+;
+; (match_operand:m n predicate constraint)
+;	Placeholder for operand #n of the instruction
+;	Predicate	string that is the name of a fucntion w/ 2 arguments:
+;				(expression, machine mode)
+;		we can build functions:
+;			"isregister"	to describe a register
+;			"isimmediate"	to describe an immediate
+;			"offsetreg"	to describe a register plus offset
+;			"anyregister"	to describe *ANY* register (uRx or Rx)
+;		But ... functions "address_operand", "immediate_operand",
+;			"register_operand", "indirect_operand"
+;		"comparison_operatot" and "ordered_comparison_operator"
+;		are also available--be aware, they include more comparisons
+;		than Zip CPU can do.
+;
+;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Move instructions: both
+;	(arbitrary) from variables to variables, but this gets
+;		expanded into:
+;	from registers to registers
+;	from immediates to registers
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+;
+;
+(define_expand "mov<mode>"
+	[(set (match_operand:ZI 0 "nonimmediate_operand" "")
+		(match_operand:ZI 1 "general_operand" ""))]
+	""
+	{//; Everything except mem=const or mem=mem can be done easily
+	//; extern void zip_debug_rtx_pfx(const char *, const_rtx);
+	//; fprintf(stderr, "ZIP-GEN-MOVE\n");
+	//; zip_debug_rtx_pfx("FROM: ", operands[1]);
+	//; zip_debug_rtx_pfx("TO  : ", operands[0]);
+
+	//; Need to load into a register between memory slots
+	if ((MEM_P(operands[0]))&&(MEM_P(operands[1]))) {
+		//; fprintf(stderr, "GEN-MOVSI: MEM -> MEM\n");
+		if (can_create_pseudo_p()) {
+			rtx tmp = gen_reg_rtx(GET_MODE(operands[1]));
+			emit_insn(gen_movsi(tmp,operands[1]));
+			operands[1] = tmp;
+		}
+	}
+
+	//; Op[0] has a bad address, need to legitimize it
+	if ((MEM_P(operands[0]))&&
+		((zip_const_address_operand(XEXP(operands[0],0)))
+		||(!zip_pd_opb_operand(XEXP(operands[0],0))))
+		)
+		{
+		//; fprintf(stderr, "GEN-MOVSI: Not to a MEM(REG)\n");
+		if (can_create_pseudo_p()) {
+			rtx tmp = gen_reg_rtx(Pmode);
+			//; Load the address into a register
+			emit_insn(gen_movsi(tmp,XEXP(operands[0],0)));
+			XEXP(operands[0],0) = tmp;
+			mark_reg_pointer(tmp,1);
+		}
+	}
+	//; Op[1] is a constant.  Need to load into a register before we can
+	//; place it into memory.
+	if ((MEM_P(operands[0]))&&
+		((CONSTANT_P(operands[1]))
+		||(CONST_INT_P(operands[1])))) {
+		//; fprintf(stderr, "GEN-MOVSI: CONST -> MEM\n");
+		//; zip_debug_rtx_pfx("MEM  : ", operands[0]);
+		//; zip_debug_rtx_pfx("CONST: ", operands[1]);
+		if (can_create_pseudo_p()) {
+			rtx tmp = gen_reg_rtx(GET_MODE(operands[0]));
+			emit_insn(gen_movsi(tmp,operands[1]));
+			operands[1] = tmp;
+		}
+	}
+	//; Op[1] has a bad address, need to legitimize it
+	if ((MEM_P(operands[1]))&&
+		//; (!REG_P(XEXP(operands[1],0)))
+		((zip_const_address_operand(XEXP(operands[1],0)))
+		||(!zip_pd_opb_operand(XEXP(operands[1],0))))
+		)
+		{
+		//; fprintf(stderr, "GEN-MOVSI: Not from a MEM(REG)\n");
+		if (can_create_pseudo_p()) {
+			rtx tmp = gen_reg_rtx(Pmode);
+			emit_insn(gen_movsi(tmp,XEXP(operands[1],0)));
+			XEXP(operands[1],0) = tmp;
+		} else if (REG_P(operands[0])) { //; Can we steal Op[0]'s reg?
+			rtx tmp = operands[0];
+			emit_insn(gen_movsi(tmp,XEXP(operands[1],0)));
+			XEXP(operands[1],0) = tmp;
+		}
+	}
+	}
+	[(set_attr "ccresult" "unchanged")])
+(define_insn "movsi_raw"
+	[(set (match_operand:SI 0 "zip_movdst_operand_p" "=r,Q,r,r")
+		(match_operand:SI 1 "zip_movsrc_operand_p" "r,r,Q,i"))]
+	"(REG_P(operands[0]))||(REG_P(operands[1]))"
+	"@
+	MOV\t%1,%0
+	STO\t%1,%0
+	LOD\t%1,%0
+	LDI\t%1,%0"
+	[(set_attr "ccresult" "unchanged")])
+(define_insn "mov<mode>_reg"	; Register to register move
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(match_operand:ZI 1 "register_operand" "r"))]
+	""
+	"MOV	%1,%0"
+	[(set_attr "ccresult" "unchanged")])
+(define_insn "mov<mode>_reg_off"	; Register to register move
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(plus:ZI (match_operand:ZI 1 "register_operand" "r")
+			(match_operand:ZI 2 "zip_mvimm_operand_p" "M")))
+		]
+	""
+	"MOV	%2(%1),%0"
+	[(set_attr "ccresult" "unchanged")])
+;(define_insn "mov<mode>_lod"	; Load from memory
+;	[(set (match_operand:ZI 0 "register_operand" "=r")
+;		(match_operand:ZI 1 "zip_memory_operand_p" "Q"))]
+;	""
+;	"LOD	%1,%0"
+;	[(set_attr "ccresult" "unchanged")])
+;(define_insn "mov<mode>_sto"	; Store into memory
+;	[(set (match_operand:ZI 0 "zip_memory_operand_p" "=Q")
+;		(match_operand:ZI 1 "register_operand" "r"))]
+;	""
+;	"STO	%1,%0"
+;	[(set_attr "ccresult" "unchanged")])
+(define_expand "mov<mode>_lod"	; Load from memory
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(match_operand:ZI 1 "zip_memory_operand_p" "Q"))]
+	"")
+(define_insn "*movsi_lod"
+	[(set (match_operand:SI 0 "register_operand" "=r")
+		(match_operand:SI 1 "zip_memory_operand_p" ""))]
+	""
+	"LOD\t%1,%0"
+	[(set_attr "predicable" "yes") (set_attr "ccresult" "unchanged")])
+;(define_insn "*movsi_lod_off"
+	;[(set (match_operand:SI 0 "register_operand" "=r")
+		;(mem:SI (plus:SI (match_operand:SI 1 "register_operand" "r")
+			;(match_operand:SI 2 "const_int_operand" "N"))))]
+	;""
+	;"LOD\t%2(%1),%0"
+	;[(set_attr "predicable" "yes") (set_attr "ccresult" "unchanged")])
+(define_expand "mov<mode>_sto"	; Store into memory
+	[(set (match_operand:ZI 0 "zip_memory_operand_p" "=Q")
+		(match_operand:ZI 1 "register_operand" "r"))]
+	"")
+(define_insn "*movsi_sto"
+	[(set (match_operand:SI 0 "zip_memory_operand_p" "=Q")
+		(match_operand:SI 1 "register_operand" "r"))]
+	""
+	"STO\t%1,%0"
+	[(set_attr "predicable" "yes") (set_attr "ccresult" "unchanged")])
+;(define_insn "*movsi_sto_off"
+	;[(set (mem:SI (plus:SI
+			;(match_operand:SI 0 "register_operand" "r")
+			;(match_operand:SI 1 "const_int_operand" "N")))
+		;(match_operand:SI 2 "register_operand" "r"))]
+	;""
+	;"STO\t%2,%1(%0)"
+	;[(set_attr "predicable" "yes") (set_attr "ccresult" "unchanged")])
+(define_insn "mov<mode>_ldi"	; Load immediate
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(match_operand:ZI 1 "immediate_operand" "ipU"))]
+	""
+	"LDI	%1,%0"
+	[(set_attr "ccresult" "unchanged")])
+;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Load and store multiple values
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+; So far, from the code I've seen from GCC's output,
+; these instructions do not appear to be necessary.
+;
+;(define_insn "load_multiple"
+;	for(a=0; a<%2; a++)
+;		LOD a(%1),%0+a
+;(define_insn "store_multiple"
+;	for(a=0; a<%2; a++)
+;		STO %0+a,a(%1)
+; pushsi -- Do not define, compiler will work around it nicely w/o our help
+;
+;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; General arithmetic instructions
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+;
+;
+;
+(define_expand "add<mode>3" ; Fastest/best instruction always goes first
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(plus:ZI (match_operand:ZI 1 "register_operand" "0")
+			(match_operand:ZI 2 "zip_opb_operand_p" "")))])
+(define_insn "*addsi3_reg" ; Fastest/best instruction always goes first
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(plus:ZI (match_operand:ZI 1 "register_operand" "0")
+			(match_operand:ZI 2 "zip_opb_single_operand_p" "rO")))
+	]
+	""
+	"ADD	%2,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "add<mode>3_off" ; Fastest/best instruction always goes first
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(plus:ZI (match_operand:ZI 1 "register_operand" "0")
+			(plus:ZI (match_operand:ZI 2 "register_operand" "r")
+				(match_operand:ZI 3 "const_int_operand" "N"))))]
+	""
+	"ADD	%3+%2,%0"
+	[(set_attr "ccresult" "set")])
+;
+;
+;
+(define_expand "sub<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(minus:ZI (match_operand:ZI 1 "register_operand" "0")
+			(match_operand:ZI 2 "zip_opb_operand_p" "")))
+	])
+(define_insn "sub<mode>3_reg"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(minus:ZI (match_operand:ZI 1 "register_operand" "0")
+			(match_operand:ZI 2 "zip_opb_single_operand_p" "rO")))
+	]
+	""
+	"SUB	%2,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "sub<mode>3_off"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(minus:ZI (match_operand:ZI 1 "register_operand" "0")
+			(plus:ZI (match_operand:ZI 2 "register_operand" "%r")
+				(match_operand:ZI 3 "const_int_operand" "N"))))
+	]
+	""
+	"SUB	%3+%2,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "mul<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(mult:ZI (match_operand:ZI 1 "register_operand" "%r")
+			(match_operand:ZI 2 "register_operand" "r")))
+	(clobber (match_scratch:ZI 3 "=r"))]
+	; "(R0 != R1)&&(R0 != R2)&&(R0!=R3)&&(R1!=R2)&&(R1=R3)&&(R2!=R3)"
+	""
+	"MOV	%1,%0
+	MPYS	%2,%0
+	MOV	%1,%3
+	ROL	16,%3
+	MPYS	%2,%3
+	ROL	16,%3
+	AND	0x0ffff,%3
+	ADD	%3,%0
+	MOV	%2,%3
+	ROL	16,%3
+	MPYS	%1,%3
+	ROL	16,%3
+	AND	0x0ffff,%3
+	ADD	%3,%0"
+	[(set_attr "ccresult" "unknown")])
+
+(define_expand "div<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(div:ZI (match_operand:ZI 1 "register_operand" "0")
+			(match_operand:ZI 2 "zip_opb_operand_p" "")))]
+	"(ZIP_DIVIDE)")
+(define_insn "div<mode>3_reg"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(div:ZI (match_operand:ZI 1 "register_operand" "0")
+			(match_operand:ZI 2 "nonmemory_operand" "rO")))]
+	"(ZIP_DIVIDE)"
+	"DIVS	%2,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "div<mode>3_off"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(div:ZI (match_operand:ZI 1 "register_operand" "0")
+			(plus:ZI (match_operand:ZI 2 "register_operand" "r")
+				(match_operand:ZI 3 "const_int_operand" "N"))))]
+	"(ZIP_DIVIDE)"
+	"DIVS	%3+%2,%0"
+	[(set_attr "ccresult" "set")])
+(define_expand "udiv<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(udiv:ZI (match_operand:ZI 1 "register_operand" "0")
+			(match_operand:ZI 2 "zip_opb_operand_p" "")))]
+	"(ZIP_DIVIDE)")
+(define_insn "udiv<mode>3_reg"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(udiv:ZI (match_operand:ZI 1 "register_operand" "0")
+			(match_operand:ZI 2 "nonmemory_operand" "rO")))]
+	"(ZIP_DIVIDE)"
+	"DIVU	%2,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "udiv<mode>3_off"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(udiv:ZI (match_operand:ZI 1 "register_operand" "0")
+			(plus:ZI (match_operand:ZI 2 "register_operand" "r")
+				(match_operand:ZI 3 "const_int_operand" "N"))))]
+	"(ZIP_DIVIDE)"
+	"DIVU	%3+%2,%0"
+	[(set_attr "ccresult" "set")])
+;;
+;; modsi3
+;; umodsi3
+;;
+(define_insn "umin<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(umin:ZI (match_operand:ZI 1 "register_operand" "%0")
+			(match_operand:ZI 2 "register_operand" "r")))
+	]
+	""
+	"CMP	%0,%2
+	MOV.C	%2,%0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+(define_insn "umax<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(umax:ZI (match_operand:ZI 1 "register_operand" "%0")
+			(match_operand:ZI 2 "register_operand" "r")))
+	]
+	""
+	"CMP	%2,%0
+	MOV.C	%2,%0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+(define_insn "smin<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(smin:ZI (match_operand:ZI 1 "register_operand" "%0")
+			(match_operand:ZI 2 "register_operand" "r")))
+	]
+	""
+	"CMP	%2,%0
+	MOV.GT	%2,%0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+(define_insn "smax<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(smax:ZI (match_operand:ZI 1 "register_operand" "%0")
+			(match_operand:ZI 2 "register_operand" "r")))
+	]
+	""
+	"CMP	%0,%2
+	MOV.LT	%2,%0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+(define_expand "and<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(and:ZI (match_operand:ZI 1 "register_operand" "%0")
+			(match_operand:ZI 2 "zip_opb_operand_p" "")))])
+(define_insn "and<mode>3_reg"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(and:ZI (match_operand:ZI 1 "register_operand" "%0")
+			(match_operand:ZI 2 "zip_opb_operand_p" "rO")))]
+	""
+	"AND	%2,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "and<mode>3_off"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(and:ZI (match_operand:ZI 1 "register_operand" "0")
+			(plus:ZI (match_operand:ZI 2 "register_operand" "r")
+				(match_operand:ZI 3 "const_int_operand" "N"))))
+	]
+	""
+	"AND	%3+%2,%0"
+	[(set_attr "ccresult" "set")])
+(define_expand "ior<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(ior:ZI (match_operand:ZI 1 "register_operand" "%0")
+			(match_operand:ZI 2 "zip_opb_operand_p" "")))])
+(define_insn "ior<mode>3_reg"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(ior:ZI (match_operand:ZI 1 "register_operand" "%0")
+			(match_operand:ZI 2 "nonmemory_operand" "rO")))
+	]
+	""
+	"OR	%2,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "ior<mode>3_off"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(ior:ZI (match_operand:ZI 1 "register_operand" "0")
+			(plus:ZI (match_operand:ZI 2 "register_operand" "r")
+				(match_operand:ZI 3 "nonmemory_operand" "N"))))
+	]
+	""
+	"OR	%3+%2,%0"
+	[(set_attr "ccresult" "set")])
+(define_expand "xor<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(xor:ZI (match_operand:ZI 1 "register_operand" "%0")
+			(match_operand:ZI 2 "zip_opb_operand_p" "")))])
+(define_insn "xor<mode>3_reg"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(xor:ZI (match_operand:ZI 1 "register_operand" "%0")
+			(match_operand:ZI 2 "nonmemory_operand" "rO")))
+	]
+	""
+	"XOR	%2,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "xor<mode>3_off"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(xor:ZI (match_operand:ZI 1 "register_operand" "0")
+			(plus:ZI (match_operand:ZI 2 "register_operand" "r")
+				(match_operand:ZI 3 "nonmemory_operand" "N"))))
+	]
+	""
+	"XOR	%3+%2,%0"
+	[(set_attr "ccresult" "set")])
+;(define_insn "addv<mode>4"
+	;[(set (match_operand:ZI 0 "register_operand" "=r")
+		;(plus:ZI (match_operand:ZI 1 "register_operand" "%r")
+			;(match_operand:ZI 2 "general_operand" "rO")))
+	;(set (pc) (if_then_else (eq (cc0) (const_int 0))
+			;(label_ref (match_operand 3))
+			;(pc)))]
+	;""
+	;"MOV	%1,%0
+	;ADD	%2,%0
+	;BV	%3"
+	;[(set_attr "predicable" "no") (set_attr "ccresult" "set")])
+;;(define_insn "subvsi4"
+;;	MOV	%1,%0
+;;	SUB	%2,%0
+;;	BV	%3
+;;(mulvsi4)
+;;(define_insn "uaddvsi4"
+;;	ADD	%2,%0
+;;	BC	%3
+;;(define_insn "usubvsi4"
+;;	MOV	%1,%0
+;;	SUB	%2,%0
+;;	BC	%3
+;;
+;; (define_insn "umulvsi4"
+;;	... ???)
+;;
+(define_insn "ashr<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(ashiftrt:ZI (match_operand:ZI 1 "register_operand" "0")
+			(match_operand:ZI 2 "nonmemory_operand" "rR")))]
+	""
+	"ASR	%2,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "ashl<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(ashift:ZI (match_operand:ZI 1 "register_operand" "0")
+			(match_operand:ZI 2 "nonmemory_operand" "rR")))]
+	""
+	"ASR	%2,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "lshr<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(lshiftrt:ZI (match_operand:ZI 1 "register_operand" "0")
+			(match_operand:ZI 2 "register_operand" "rR")))]
+	""
+	"LSR	%2,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "rotl<mode>3"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(rotate:ZI (match_operand:ZI 1 "register_operand" "0")
+			(match_operand:ZI 2 "nonmemory_operand" "rR")))]
+	""
+	"ROL	%2,%0"
+	[(set_attr "ccresult" "set")])
+;
+(define_insn "neg<mode>2"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(neg:ZI (match_operand:ZI 1 "register_operand" "r")))
+	]
+	""
+	"NEG	%1,%0"
+	[(set_attr "ccresult" "validzn")])
+(define_insn "abs<mode>2"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(abs:ZI (match_operand:ZI 1 "register_operand" "0")))
+	]
+	""
+	"TEST	%0
+	NEG.LT	%0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+(define_insn "popcount<mode>2"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(popcount:ZI (match_operand:ZI 1 "register_operand" "r")))
+	]
+	""
+	"POPC	%1,%0"
+	[(set_attr "ccresult" "set")])
+(define_expand "parity<mode>2"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(popcount:ZI (match_operand:ZI 1 "register_operand" "r")))
+	(set (match_dup:ZI 0) (and:ZI (match_dup:ZI 0) (const_int -2)))
+	])
+(define_insn "one_cmpl<mode>2"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(not:ZI (match_operand:ZI 1 "register_operand" "0")))
+	]
+	""
+	"XOR	-1,%0"
+	[(set_attr "ccresult" "set")])
+;
+;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; General arithmetic instructions -- double words
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+;
+;
+(define_expand "movdi3"
+	[(set (match_operand:DI 0 "nonimmediate_operand" "")
+		(match_operand:DI 1 "general_operand" ""))])
+(define_insn "movdi_lod"
+	[(set (match_operand:DI 0 "register_operand" "=r")
+		(mem:DI (match_operand:SI 1 "zip_opb_operand_p" "r")))]
+	""
+	{
+		if (REG_P(operands[0]))
+			return "LOD\t(%1),%H0\n\tLOD\t1(%1),%L0";
+		else if (GET_CODE(operands[0])==PLUS) {
+			if ((REG_P(XEXP(operands[0],0)))
+				&&(CONST_INT_P(XEXP(operands[0],1)))) {
+				static	char	buf[64];
+				sprintf(buf,
+					"LOD\t%ld(%%1),%%H0\n\tLOD\t%ld(%%1),%%L0",
+					INTVAL(XEXP(operands[0],1)),
+					INTVAL(XEXP(operands[0],1)+1));
+				return buf;
+			}
+		} else return "BREAK";
+	}
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unchanged")])
+(define_insn "movdi_sto"
+	[(set (mem:DI (match_operand:SI 0 "zip_opb_operand_p" ""))
+		(match_operand:DI 1 "register_operand" "r"))]
+	""
+	{
+		if (REG_P(operands[0]))
+			return "STO\t%H0,(%1)\n\tSTO\t%L0,1(%1)";
+		else if (GET_CODE(operands[0])==PLUS) {
+			if ((REG_P(XEXP(operands[0],0)))
+				&&(CONST_INT_P(XEXP(operands[0],1)))) {
+				static	char	buf[64];
+				sprintf(buf,
+					"STO\t%%H0,%ld(%%1)\n\tSTO\t%%L0,%ld(%%1)",
+					INTVAL(XEXP(operands[0],1)),
+					INTVAL(XEXP(operands[0],1)+1));
+				return buf;
+			}
+		} else return "BREAK";
+	}
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unchanged")])
+(define_insn "movdi_ldi"
+	[(set (match_operand:DI 0 "register_operand" "=r")
+		(match_operand:DI 1 "immediate_operand" "i"))]
+	""
+	"LDI\t%H1,%H0\n\tLDI\t%L1,%L0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unchanged")])
+(define_insn "adddi3" ; Fastest/best instruction always goes first
+	[(set (match_operand:DI 0 "register_operand" "=r")
+		(plus:DI (match_operand:DI 1 "register_operand" "0")
+			(match_operand:DI 2 "register_operand" "r")))
+	]
+	""
+	"ADD	%L2,%L0\n\tADD.C\t1,%H0\n\tADD\t%H2,%H0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+;
+(define_insn "subdi3"
+	[(set (match_operand:DI 0 "register_operand" "=r")
+		(minus:DI (match_operand:DI 1 "register_operand" "0")
+			(match_operand:DI 2 "register_operand" "r")))
+	]
+	""
+	"SUB	%L2,%L0\n\tSUB.C\t1,%H0\n\tSUB\t%H2,%H0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+;
+(define_insn "anddi3"
+	[(set (match_operand:DI 0 "register_operand" "=r")
+		(and:DI (match_operand:DI 1 "register_operand" "%0")
+			(match_operand:DI 2 "register_operand" "r")))
+	]
+	""
+	"AND	%L2,%L0\n\tAND\t%H2,%H0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+;
+(define_insn "iordi3"
+	[(set (match_operand:DI 0 "register_operand" "=r")
+		(ior:DI (match_operand:DI 1 "register_operand" "%0")
+			(match_operand:DI 2 "register_operand" "r")))
+	]
+	""
+	"OR	%2,%0\n\tOR\t%H2,%H0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+;
+(define_insn "xordi3"
+	[(set (match_operand:DI 0 "register_operand" "=r")
+		(xor:DI (match_operand:DI 1 "register_operand" "%0")
+			(match_operand:DI 2 "register_operand" "r")))
+	]
+	""
+	"XOR	%2,%0\n\tXOR\t%H2,%H0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+;
+(define_insn "negdi2"
+	[(set (match_operand:DI 0 "register_operand" "=r")
+		(neg:DI (match_operand:DI 1 "register_operand" "0")))]
+	""
+	"XOR	-1,%L0\n\tXOR\t-1,%H0\n\tADD\t1,%L0\n\tADD.C\t1,%H0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+;
+(define_insn "absdi2"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(abs:ZI (match_operand:ZI 1 "register_operand" "0")))
+	(clobber (match_scratch:SI 2 "=r"))]
+	""
+	"CLR	%2
+	TEST	%H0		; Problem, we can't tell conditions
+	LDILO.LT	1,%2
+	XOR.LT	-1,%L0
+	XOR.LT	-1,%H0
+	ADD	%2,%L0
+	ADD.C	%1,%HI"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+(define_insn "one_cmpldi2"
+	[(set (match_operand:DI 0 "register_operand" "=r")
+		(not:DI (match_operand:DI 1 "register_operand" "0")))
+	]
+	""
+	"XOR	-1,%L0\n\tXOR\t-1,%H0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+(define_insn "umindi3"
+	[(set (match_operand:DI 0 "register_operand" "=r")
+		(umin:DI (match_operand:DI 1 "register_operand" "%0")
+			(match_operand:DI 2 "register_operand" "r")))
+	]
+	""
+	"CMP	%H0,%H2
+	CMP.Z	%L0,%L2
+	MOV.C	%H2,%H0
+	MOV.C	%L2,%L0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+(define_insn "umaxdi3"
+	[(set (match_operand:DI 0 "register_operand" "=r")
+		(umax:DI (match_operand:DI 1 "register_operand" "%0")
+			(match_operand:DI 2 "register_operand" "r")))
+	]
+	""
+	"CMP	%H2,%H0
+	CMP.Z	%L2,%L0
+	MOV.C	%H2,%H0
+	MOV.C	%L2,%L0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+(define_insn "popcountdi2"
+	[(set (match_operand:SI 0 "register_operand" "=r")
+		(popcount (match_operand:DI 1 "register_operand" "r")))
+	(clobber (match_scratch:SI 2 "=r"))
+	]
+	""
+	"POPC	%L1,%0
+	POPC	%H1,%2
+	ADD	%2,%0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "set")])
+(define_expand "paritydi2"
+	[(set (match_operand:SI 0 "register_operand" "=r")
+		(popcount (match_operand:DI 1 "register_operand" "r")))
+	(set (match_dup 0) (and:SI (match_dup 0) (const_int -2)))
+	])
+;
+; Still missing DI instructions for smin:DI, smax:DI, movdicc, adddicc,
+;	mult:di, div:di, divu:di
+;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Conditional arithmetic instructions
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+;
+;
+;
+(define_expand "cstore<mode>4" ; Store 0 or 1 in %0 based on cmp between %2&%3
+	[(set (cc0) (compare (match_operand:ZI 2 "register_operand" "r")
+		(match_operand:ZI 3 "nonmemory_operand" "rO")))
+	(set (match_operand:ZI 0 "register_operand" "=r") (if_then_else:ZI
+			(match_operator 1 "ordered_comparison_operator" 
+					[(cc0) (const_int 0)])
+			(const_int 1) (const_int 0)))]
+	""
+	)
+(define_insn "cstoredi4" ; Store 0 or 1 in %0 based on cmp between %2&%3
+	[(set (match_operand:SI 0 "register_operand" "=r")
+		(if_then_else:SI (match_operator 1 "ordered_comparison_operator" 
+			[(compare (match_operand:DI 2 "register_operand" "r")
+				(match_operand:DI 3 "register_operand" "r"))])
+			(const_int 1) (const_int 0)))]
+	""
+	{
+		switch(GET_CODE(operands[1])) {
+		case EQ:	return "CLR\t%0\n\tCMP\t%H3,%H2\n\tCMP.Z\t%L3,%L2\n\tLDILO.Z\t1,%0\n";
+		case NE:	return "CLR\t%0\n\tCMP\t%H3,%H2\n\tCMP.NZ\t%L3,%L2\n\tLDILO.NZ\t1,%0\n";
+		case LTU:	return "CLR\t%0\n\tCMP\t%H3,%H2\n\tCMP.Z\t%L3,%L2\n\tLDILO.C\t1,%0\n";
+		case LEU:	return "CLR\t%0\n\tCMP\t%H3,%H2\n\tCMP.Z\t%L3,%L2\n\tLDILO.C\t1,%0\n\tLDILO.Z\t1,%0\n";
+		case GTU:	return "CLR\t%0\n\tCMP\t%H2,%H3\n\tCMP.Z\t%L2,%L3\n\tLDILO.C\t1,%0\n";
+		case GEU:	return "CLR\t%0\n\tCMP\t%H2,%H3\n\tCMP.Z\t%L2,%L3\n\tLDILO.C\t1,%0\n\tLDILO.Z\t1,%0\n";
+		default:
+			gcc_unreachable();
+		}
+	}
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Comparison instructions, both compare and test
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+;
+;
+;; This will only work so well, since the direction of the compare is
+;; important in unsigned compares.
+;;
+(define_insn "cmp<mode>"
+	[(set (cc0) (compare (match_operand:ZI 0 "register_operand" "r")
+		(match_operand:ZI 1 "nonmemory_operand" "rO")))]
+	""
+	"CMP\t%1,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "cmp<mode>_off"
+	[(set (cc0) (compare (match_operand:ZI 0 "register_operand" "r")
+		(plus:ZI (match_operand:ZI 1 "register_operand" "r")
+			(match_operand:ZI 2 "const_int_operand" "N"))))]
+	""
+	"CMP\t%2+%1,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "test<mode>"
+	[(set (cc0) (compare (and:ZI (match_operand:ZI 0 "register_operand" "r")
+				(match_operand:ZI 1 "nonmemory_operand" "rO"))
+			(const_int 0)))]
+	""
+	"TEST	%1,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "test<mode>_off"
+	[(set (cc0) (compare (and:ZI (match_operand:ZI 0 "register_operand" "r")
+				(plus:ZI
+				  (match_operand:ZI 1 "register_operand" "r")
+				  (match_operand:ZI 2 "const_int_operand" "N")))
+			(const_int 0)))]
+	""
+	"TEST	%2+%1,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "nop"
+	[(const_int 0)]
+	""
+	"NOOP"
+	[(set_attr "ccresult" "unchanged")])
+;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Conditional execution predicates
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+; Sadly, these aren't complete like they should be.  Although these are all of
+; the conditional execution prefixes that the Zip CPU supports, GCC looks for
+; other conditions then these.  That is, (cond_exec ...) is not as well 
+; recognized as (if_then_else ...).  So we have to duplicate things to support
+; both methods.
+;
+(define_cond_exec
+	[(ne (cc0) (const_int 0))]
+	""
+	"(NZ)"
+	[(set_attr "conditional" "yes")])
+(define_cond_exec
+	[(lt (cc0) (const_int 0))]
+	""
+	"(LT)"
+	[(set_attr "conditional" "yes")])
+(define_cond_exec
+	[(eq (cc0) (const_int 0))]
+	""
+	"(Z)"
+	[(set_attr "conditional" "yes")])
+(define_cond_exec
+	[(gt (cc0) (const_int 0))]
+	""
+	"(GT)"
+	[(set_attr "conditional" "yes")])
+(define_cond_exec
+	[(ge (cc0) (const_int 0))]
+	""
+	"(GE)"
+	[(set_attr "conditional" "yes")])
+(define_cond_exec
+	[(ltu (cc0) (const_int 0))]
+	""
+	"(C)"
+	[(set_attr "conditional" "yes")])
+;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Conditional move instructions, since these won't accept conditional
+;;	execution RTL
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+; // Look for #define HAVE_conditional_move to understand how these might be
+; // used.
+;
+(define_insn "set_zero_or_one<mode>"
+	[(set (match_operand:ZI 0 "register_operand" "=r") (if_then_else:ZI
+			(match_operator 1 "ordered_comparison_operator" 
+					[(cc0) (const_int 0)])
+			(const_int 1) (const_int 0)))]
+	""
+	{ return (zip_set_zero_or_one(operands[1], operands[0]));
+	}
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unchanged")])
+(define_insn "mov<mode>cc"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(if_then_else:ZI (match_operator 1 "ordered_comparison_operator"
+			[(cc0) (const_int 0)])
+			(match_operand:ZI 2 "general_operand" "rio")
+			(match_operand:ZI 3 "nonmemory_operand" "rio")))]
+	""
+	{
+	return zip_movsicc(operands[0], operands[1], operands[2], operands[3]);
+	}
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unchanged")])
+(define_insn "add<mode>cc"
+	[(set (match_operand:ZI 0 "register_operand" "=r,r")
+		(if_then_else:ZI (match_operator 1 "ordered_comparison_operator"
+			[(cc0) (const_int 0)])
+			(plus:ZI (match_operand:ZI 2 "register_operand" "0,r")
+				(match_operand:ZI 3 "nonmemory_operand" "rO,M"))
+			(match_dup 0)))]
+	""
+	{
+	return zip_addsicc(operands[0], operands[1], operands[2], operands[3]);
+	}
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unchanged")])
+;
+;
+;(define_expand "mov<mode>cc"
+;	[(set (match_operand:ZI 0 "general_operand" "=rm,rm,r,r,r"
+;		(if_then_else:ZI (match_operator 1 "ordered_comparison_operator"
+;			[(cc0) (const_int 0)])
+;			(match_operand:ZI 2 "general_operand" "0,r,0,m,rm")
+;			(match_operand:ZI 3 "general_operand" "r,0,m,0,rm"))))]
+;	)
+;
+;
+;
+; While an interesting approach, the following suffers from problems when the
+; move amount is constant.  At anything less than four, moves should not require
+; the movmemSI instruction.  At anything greater, if constant, the initial tests
+; are not required and should result in a hardcoded result.  Practically,
+; though, this should really be a define_expand instruction, calling on the
+; RTX's of all the respective subinstructions found below.
+;
+;(define_insn "movmemSI"
+;	[(parallel [(set (mem:BLK (match_operand 0 "register_operand" "+r"));Dst
+;			(mem:BLK (match_operand 1 "register_operand" "+r")));Src
+;		(use (match_operand:SI 2 "register_operand" "+r"))]); Length
+;		(match_operand 3 "" "")			;Alignment
+;		(clobber (match_scratch:SI 4 "=r"))
+;		(clobber (match_scratch:SI 5 "=r"))
+;		(clobber (match_scratch:SI 6 "=r"))
+;		(clobber (match_scratch:SI 7 "=r"))]
+;	""
+;	"TEST\t1,%2
+;	LOD.NZ\t%1,%4
+;	STO.NZ\t%4,%0
+;	ADD.NZ\t1,%0
+;	ADD.NZ\t1,%1
+;	TEST\t2,%2
+;	LOD.NZ\t%1,%4
+;	LOD.NZ\t1(%1),%5
+;	STO.NZ\t%4,(%0)
+;	STO.NZ\t%4,1(%0)
+;	ADD.NZ\t2,%0
+;	ADD.NZ\t2,%1
+;	AND\t-4,%2
+;	BZ\t.Lskp%=\n.Ltop%=:
+;	LOD\t(%1),%4
+;	LOD\t1(%1),%5
+;	LOD\t2(%1,%6
+;	LOD\t3(%1),%7
+;	STO\t%4,(%1)
+;	STO\t%5,1(%1)
+;	STO\t%6,2(%1)
+;	STO\t%7,3(%1)
+;	SUB\t4,%2
+;	BZ\t%.Lskp%=
+;	BRA\t.Ltop%=\n.Lskp%=:"
+;	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+;(define_insn "setmemsi"
+;	[(parallel 
+;		[(set (mem:BLK
+;			(match_operand 0 "register_operand" "+r")); Destination
+;			(match_operand:SI 2 "register_operand" "r")) ; Source
+;		(use (match_operand:SI 1 "register_operand" "+r"))])  ; Length
+;		(match_operand 3 "" "")]
+;	""
+;	"TEST\t1,%1
+;	STO.NZ\t%2,(%0)
+;	ADD.NZ\t1,%0
+;	TEST\t2,%1
+;	STO.NZ\t%2,(%0)
+;	STO.NZ\t%2,1(%0)
+;	ADD.NZ\t2,%0
+;	AND\t-4,%1
+;	BZ\t.Lskp%=\n.Ltop%=:\n
+;	STO\t%2,(%0)
+;	STO\t%2,1(%0)
+;	STO\t%2,2(%0)
+;	STO\t%2,3(%0)
+;	SUB\t%4,%0
+;	BZ\t.Lskp%=
+;	BRA\t.Ltop%=\n.Lskp%=:"
+;	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+;;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Control flow instructions
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+;
+;
+(define_expand "jump"
+	[(set (pc)
+		(label_ref (match_operand 0 "" "")))]); // Was general-op, "mro"
+(define_insn "jump_const"	; Must be modeless, VOIDmode, not SI or any othr
+	[(set (pc)	; Otherwise it won't accept jumps to labels
+		(match_operand:SI 0 "zip_const_address_operand_p" ""))]
+	""
+	"BRA	%0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unchanged")])
+(define_insn "jump_label"	; Must be modeless, VOIDmode, not SI or any othr
+	[(set (pc)	; Otherwise it won't accept jumps to labels
+		(label_ref (match_operand 0 "" "")))]
+	""
+	"BRA	%0"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unchanged")])
+;
+; This is really the same thing as an indirect jump ... the big difference
+; is that the zip_address_operand_p checks for an "N" type condition, not an
+; "M" type condition ... a bug, but one that works for now.  (The assembler
+; should be able to catch and except on it ...)
+;
+; #warning "This predicate is appropriate for non-moves, but not for JMPs"
+(define_insn "jump_variable"
+	[(set (pc)
+		(match_operand:SI 0 "zip_address_operand_p" ""))]
+	""
+	"JMP	%0"
+	[(set_attr "ccresult" "unchanged")])
+;
+; Indirect jumps ... both to registers, and registers plus offsets
+;
+(define_insn "indirect_jump"
+	[(set (pc)
+		(match_operand:SI 0 "register_operand" "r"))]
+	""
+	"JMP	%0"
+	[(set_attr "ccresult" "unchanged")])
+(define_insn "indirect_jump_mem"
+	[(set (pc) (match_operand:SI 0 "zip_memory_operand_p" "o"))]
+	""
+	"LOD	%0,PC"
+	[(set_attr "ccresult" "unchanged")])
+(define_insn "indirect_jump_off"
+	[(set (pc)
+		(plus:SI (match_operand:SI 0 "register_operand" "r")
+			(match_operand:SI 1 "const_int_operand" "M")))]
+	""
+	"JMP	%1(%0)"
+	[(set_attr "ccresult" "unchanged")])
+;;
+; cbranchsi4
+;;	Op 0 = the comparison operator (le,lt,eq,ne,gt,ge,and usgn ltu,geu,etc.)
+;;	Op 1&2 the operands of the compare instruction
+;;	Op 3 is the jump label
+;;
+;;
+;; #warning Need to adjust this so that the "LT" code doesnt get generated ...
+;;
+(define_expand "cbranch<mode>4"
+	[(set (cc0) (compare (match_operand:ZI 1 "register_operand" "r")
+		(match_operand:ZI 2 "nonmemory_operand" "rO")))
+	(set (pc) (if_then_else (match_operator 0 "ordered_comparison_operator"
+			[(cc0) (const_int 0)])
+			(label_ref (match_operand 3 "" ""))
+			(pc)))]
+	""
+	{
+		// extern void zip_debug_rtx(const_rtx);
+		//; Two branches give us no end of difficulty when implementing.
+		//; Let's check for these two branch codes, and swap the 
+		//; comparison to simplify them.
+		// fprintf(stderr, "CBRANCH\n");
+		// zip_debug_rtx(operands[0]);
+		// zip_debug_rtx(operands[1]);
+		// zip_debug_rtx(operands[2]);
+		// zip_debug_rtx(operands[3]);
+		if ((GET_CODE(operands[0])==GTU)&&(REG_P(operands[2]))) {
+			// fprintf(stderr, "CBRANCH:(GTU,?,REG,?)\n");
+			emit_insn(gen_rtx_SET(VOIDmode, cc0_rtx,
+				gen_rtx_COMPARE(VOIDmode, operands[2], operands[1])));
+			emit_jump_insn(gen_cbranch_jmp_ltu(operands[3]));
+			DONE;
+		} else if((GET_CODE(operands[0])==GEU)&&(REG_P(operands[2]))) {
+			// fprintf(stderr, "CBRANCH:(GEU,?,REG,?)\n");
+			emit_insn(gen_rtx_SET(VOIDmode, cc0_rtx,
+				gen_rtx_COMPARE(VOIDmode, operands[2], operands[1])));
+			emit_jump_insn(gen_cbranch_jmp_leu(operands[3]));
+			DONE;
+		} // ; Otherwise ... just handle the branch normally
+
+		//; Except ... we can do better for some instructions, such as
+		//; LE.  While we could exchange CMP Rx,Ry into -1(Rx),Ry, it
+		//; would be difficult to explain to users why MIN_INT didn't
+		//; compare properly.  Hence we only adjust constant integers.
+		//;
+		if ((GET_CODE(operands[0])==LE)
+				&&(CONST_INT_P(operands[2]))
+				&&(INTVAL(operands[2])>(1<<17)-2)) {
+			// fprintf(stderr, "CBRANCH:(LE,?,#,?)\n");
+			emit_insn(gen_rtx_SET(VOIDmode, cc0_rtx,
+				gen_rtx_COMPARE(VOIDmode, operands[1],
+					GEN_INT(INTVAL(operands[2])+1))));
+			emit_jump_insn(gen_cbranch_jmp_lt(operands[3]));
+			DONE;
+		} else if ((GET_CODE(operands[0])==LEU)
+				&&(CONST_INT_P(operands[2]))
+				&&(INTVAL(operands[2])<(1<<17)-2)) {
+			// fprintf(stderr, "CBRANCH:(LEU,?,#,?)\n");
+			emit_insn(gen_rtx_SET(VOIDmode, cc0_rtx,
+				gen_rtx_COMPARE(VOIDmode, operands[1],
+					GEN_INT(INTVAL(operands[2])+1))));
+			emit_jump_insn(gen_cbranch_jmp_ltu(operands[3]));
+			DONE;
+		}
+	})
+(define_insn "cbranch_jmp_eq"
+	[(set (pc) (if_then_else (eq (cc0) (const_int 0))
+		 (label_ref (match_operand 0 "" ""))
+		 (pc)))]
+	""
+	"BZ\t%0"
+	[(set_attr "predicable" "no")
+		(set_attr "conditional" "yes")
+		(set_attr "ccresult" "unchanged")])
+(define_insn "cbranch_jmp_neq"
+	[(set (pc) (if_then_else (ne (cc0) (const_int 0))
+		 (label_ref (match_operand 0 "" ""))
+		 (pc)))]
+	""
+	"BNZ\t%0"
+	[(set_attr "predicable" "no")
+		(set_attr "conditional" "yes")
+		(set_attr "ccresult" "unchanged")])
+(define_insn "cbranch_jmp_lt"
+	[(set (pc) (if_then_else (lt (cc0) (const_int 0))
+		 (label_ref (match_operand 0 "" ""))
+		 (pc)))]
+	""
+	"BLT\t%0"
+	[(set_attr "predicable" "no")
+		(set_attr "conditional" "yes")
+		(set_attr "ccresult" "unchanged")])
+(define_insn "cbranch_jmp_le"
+	[(set (pc) (if_then_else (le (cc0) (const_int 0))
+		 (label_ref (match_operand 0 "" ""))
+		 (pc)))]
+	""
+	"BLT\t%0
+	BZ\t%0"
+	[(set_attr "predicable" "no")
+		(set_attr "conditional" "yes")
+		(set_attr "ccresult" "unchanged")])
+(define_insn "cbranch_jmp_gt"
+	[(set (pc) (if_then_else (gt (cc0) (const_int 0))
+		 (label_ref (match_operand 0 "" ""))
+		 (pc)))]
+	""
+	"BGT\t%0"
+	[(set_attr "predicable" "no")
+		(set_attr "conditional" "yes")
+		(set_attr "ccresult" "unchanged")])
+(define_insn "cbranch_jmp_ge"
+	[(set (pc) (if_then_else (ge (cc0) (const_int 0))
+		 (label_ref (match_operand 0 "" ""))
+		 (pc)))]
+	""
+	"BGE\t%0"
+	[(set_attr "predicable" "no")
+		(set_attr "conditional" "yes")
+		(set_attr "ccresult" "unchanged")])
+(define_insn "cbranch_jmp_ltu"
+	[(set (pc) (if_then_else (ltu (cc0) (const_int 0))
+		 (label_ref (match_operand 0 "" ""))
+		 (pc)))]
+	""
+	"BC\t%0"
+	[(set_attr "predicable" "no")
+		(set_attr "conditional" "yes")
+		(set_attr "ccresult" "unchanged")])
+(define_insn "cbranch_jmp_gtu"
+	[(set (pc) (if_then_else (gtu (cc0) (const_int 0))
+		 (label_ref (match_operand 0 "" ""))
+		 (pc)))]
+	""	; Flip the condition, and then we can jump
+	"XOR\t2,CC
+	BC\t%0"
+	[(set_attr "predicable" "no")
+		(set_attr "conditional" "yes")
+		(set_attr "ccresult" "unknown")])
+(define_insn "cbranch_jmp_leu"
+	[(set (pc) (if_then_else (leu (cc0) (const_int 0))
+		 (label_ref (match_operand 0 "" ""))
+		 (pc)))]
+	""	; Need to check for both LTU (i.e. C) and Z
+	"BC\t%0
+	BZ\t%0"
+	[(set_attr "predicable" "no")
+		(set_attr "conditional" "yes")
+		(set_attr "ccresult" "unchanged")])
+(define_insn "cbranch_jmp_geu"
+	[(set (pc) (if_then_else (geu (cc0) (const_int 0))
+		 (label_ref (match_operand 0 "" ""))
+		 (pc)))]
+	""	; Flip the comparison, then check for GEU (once flipped)a
+		; Z is naturally checked for, as C would've never been set on Z
+		; so by flipping it, it is tantamount to saying Z or GTU.
+	"BZ\t%0
+	XOR\t2,CC
+	BC\t%0"
+	[(set_attr "predicable" "no")
+		(set_attr "conditional" "yes")
+		(set_attr "ccresult" "unknown")])
+(define_insn "cbranchdi4"
+	[(set (pc) (if_then_else
+		(match_operator 0 "ordered_comparison_operator"
+			[(match_operand:DI 1 "register_operand" "r")
+				(match_operand:DI 2 "nonmemory_operand" "rO")])
+			(label_ref (match_operand 3 "" ""))
+			(pc)))
+	(clobber (cc0))]
+	""
+	{
+		switch(GET_CODE(operands[0])) {
+		case EQ:
+			return "CMP\t%H2,%H1\n\tCMP.Z\t%L2,%L1\n\tBZ\t%3";
+		case NE:
+			return "CMP\t%H2,%H1\n\tCMP.NZ\t%L2,%L1\n\tBNZ\t%3";
+		case LE:
+			return "CMP\t%H2,%H1\n\tBLT\t%3\n\tCMP.Z\t%L2,%L1\n\tBC\t%3\n\tBZ\t%3";
+		case GT:
+			return "CMP\t%H1,%H2\n\tBLT\t%3\n\tBNZ\t.Ldi%=\n\tCMP\t%L1,%L2\n\tBC\t%3\n.Ldi%=:";
+		case LT:
+			return "CMP\t%H2,%H1\n\tBLT\t%3\n\tBNZ\t.Ldi%=\n\tCMP\t%L2,%L1\n\tBC\t%3\n.Ldi%=:";
+		case GE:
+			return "CMP\t%H1,%H2\n\tBLT\t%3\n\tBNZ\t.Ldi%=\n\tCMP\t%L1,%L2\n\tBC\t%3\nBZ\t%3\n.Ldi%=:";
+		case LTU:
+			return "CMP\t%H2,%H1\n\tCMP.Z\t%L2,%L1\n\tBC\t%3\n";
+		case LEU:
+			return "CMP\t%H2,%H1\n\tCMP.Z\t%L2,%L1\n\tBC\t%3\n\tBZ\t%3";
+		case GTU:
+			return "CMP\t%H1,%H2\n\tCMP.Z\t%L1,%L2\n\tBC\t%3\n";
+		case GEU:
+			return "CMP\t%H1,%H2\n\tCMP.Z\t%L1,%L2\n\tBC\t%3\nBZ\t%3";
+		default:
+			gcc_unreachable();
+		}
+	}
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Subroutine call
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+;
+; There are two types of calls: "call" and "call_value".
+;
+; Each of these types of calls are then expanded into one of:
+;
+;	_const		- A call to a constant address, such as a symbol
+;			reference or a fixed location
+;
+;	_label		- This should be the same as _const, except that for
+;			some reason the RTL and matching rules are separate.
+;			Hence we have a separate rule for this.
+;
+;	_mem		- The memory address we wish to jump to is stored in
+;			memory somewhere, and we have only a pointer.  In this
+;			case, we load that pointer straight to the PC and go.
+;
+;	_var		- The address to jump to is given as an offset to a 
+;			register, such as X+R3.  This is an indirect jump.  
+;			Although we support it, it does require different RTL
+;			code.
+;
+(define_expand "call"
+	[(call (match_operand 0 "" "")
+		(match_operand 1 "" ""))]
+	""
+	{
+		if (MEM_P(operands[0])) {
+			// This should always be the case
+			rtx addr = XEXP(operands[0],0);
+			if (zip_const_address_operand_p(addr, SImode)) {
+				// fprintf(stderr, "Generating gen_void_call_const()\n");
+				emit_call_insn(gen_void_call_const(addr,
+						operands[1]));
+			} else if ((MEM_P(addr))&&(zip_address_operand(
+							XEXP(addr,0)))) {
+				emit_call_insn(gen_void_call_mem(XEXP(addr,0),
+								 operands[1]));
+			} else {
+				emit_call_insn(gen_void_call_var(addr,
+								 operands[1]));
+			}
+			DONE;
+		}
+	})
+;
+;
+;
+; How do we want to do this better?
+;	Replace the RTL w/
+;		return_label= gen_label_rtx();
+;		emit_movsi(gen_rtx_REG(zip_R0),plus_constant(
+;			gen_rtx_REG(zip_PC),return_label));
+;		emit_jump(label_rtx(
+;		
+;		emit_label(return_label);
+;
+; The problem is: we can't!  GCC distinguishes between jumps and calls when
+; optimizing, and it doesn't see the need to keep the label around.  Thus, the
+; label gets removed and the call gets lost.  Hence we do it this way (below).
+; I'll probably bastardize a means of getting a new codelabel that GCC doesn't
+; recognize as such, but for now we'll use .Lcall# as our label. 
+;
+(define_insn "void_call_const"
+	[(parallel [(call (mem:SI (match_operand:SI 0 "zip_const_address_operand_p" ""))
+			(match_operand 1 "const_int_operand" "n"))
+		(clobber (reg:SI RTN_REG))])]
+	""
+	"MOV	.Lcall%=(PC),R0\;BRA\t%0\n.Lcall%=:"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+(define_insn "void_call_mem"
+	[(parallel [(call (mem:SI (match_operand:SI 0 "zip_memory_operand_p" "Q"))
+			(match_operand 1 "const_int_operand" "n"))
+		(clobber (reg:SI RTN_REG))])]
+	""
+	"MOV	.Lcall%=(PC),R0\;LOD\t%0,PC\n.Lcall%=:"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+;
+; #warning "This predicate is appropriate for non-moves, but not for JMPs"
+(define_insn "void_call_var"
+	[(parallel [(call (mem:SI (match_operand:SI 0 "zip_address_operand_p" ""))
+			(match_operand 1 "const_int_operand" "n"))
+		(clobber (reg:SI RTN_REG))])]
+	""
+	"MOV	.Lcall%=(PC),R0\;JMP\t%0\n.Lcall%=:"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+(define_expand "call_value"
+	[(set (reg:SI RTNV_REG)
+		(call (match_operand:SI 1 "" "")
+			(match_operand 2 "const_int_operand" "n")))
+	(set (match_operand:SI 0 "register_operand" "=r") (reg:SI RTNV_REG))]
+	""
+	{
+		// extern void zip_debug_rtx(const_rtx);
+		// fprintf(stderr, "ZIP.MD::CALL-VALUE()\n");
+		// zip_debug_rtx(operands[1]);
+		if (MEM_P(operands[1])) {
+			// fprintf(stderr, "ZIP.MD::CALL-VALUE() MEM_P\n");
+			// zip_debug_rtx(operands[1]);
+			// This should always be the case
+			rtx addr = XEXP(operands[1],0);
+			if (zip_const_address_operand_p(addr, SImode)) {
+				// fprintf(stderr, "Generating gen_reg_call_const()\n");
+				emit_call_insn(gen_reg_call_const(addr, operands[2]));
+			} else if ((MEM_P(addr))&&(zip_address_operand(XEXP(addr,0)))) {
+				// fprintf(stderr, "ZIP.MD::CALL-VALUE() INDIRECT\n");
+				emit_call_insn(gen_reg_call_mem(XEXP(addr,0), operands[2]));
+			} else {
+				// fprintf(stderr, "ZIP.MD::CALL-VALUE() INDIRECT\n");
+				emit_call_insn(gen_reg_call_var(addr, operands[2]));
+			}
+			DONE;
+		}
+	})
+(define_insn "reg_call_const"
+	[(parallel [(set (reg:SI RTNV_REG)
+		(call (mem:SI (match_operand:SI 0 "zip_const_address_operand_p" ""))
+			(match_operand 1 "const_int_operand" "n")))
+		(clobber (reg:SI RTN_REG))])]
+	""
+	"MOV	.Lcall%=(PC),R0\;BRA\t%0\n.Lcall%=:"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+(define_insn "reg_call_mem"
+	[(set (reg:SI RTNV_REG)
+		(call (mem:SI (match_operand:SI 0 "zip_memory_operand_p" "Q"))
+			(match_operand 1 "const_int_operand" "n")))
+		(clobber (reg:SI RTN_REG))]
+	""
+	"MOV	.Lcall%=(PC),R0\n\tLOD\t%0,PC\n.Lcall%=:"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+;
+; #warning "This predicate is appropriate for non-moves, but not for JMPs"
+(define_insn "reg_call_var"
+	[(parallel [(set (reg:SI RTNV_REG)
+		(call (mem:SI (match_operand:SI 0 "zip_address_operand_p" ""))
+			(match_operand 1 "const_int_operand" "n")))
+		(clobber (reg:SI RTN_REG))])]
+	""
+	"MOV	.Lcall%=(PC),R0\n\tJMP\t%0\n.Lcall%=:"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Frame manipulation RTX
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+;
+;
+(define_expand "prologue"
+	[(const_int 0)]
+	""
+	"{ zip_expand_prologue(); DONE; }")
+(define_expand "epilogue"
+	[(return)]
+	""
+	"{ zip_expand_epilogue(); DONE; }")
+(define_expand "return" ; In order to use the function predicate, this *must*
+	[(return)]	; be a define_expand
+	"zip_use_return_insn()")
+	; "JMP	R0"
+	; [(set_attr "ccresult" "unchanged")])
+(define_insn "*return"	; A "*" -- means it cannot be called from C
+	[(return)]
+	""
+	"JMP	R0"
+	[(set_attr "ccresult" "unchanged")])
+(define_insn "simple_return"	; A "*" -- means it cannot be called from C
+	[(simple_return)]
+	""
+	"JMP	R0"
+	[(set_attr "ccresult" "unchanged")])
+;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Zip Builtin Functions
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+;
+;
+(define_insn "zip_rtu"
+	[(unspec_volatile [(reg:SI CC_REG)] UNSPEC_RTU)
+	(clobber (cc0))]
+	"(!ZIP_USER)"
+	"RTU"
+	[(set_attr "ccresult" "unknown")])
+(define_insn "zip_halt" ; Needs to be unspec_volatile, or optimizer will opt out
+	[(unspec_volatile [(reg:SI CC_REG)] UNSPEC_HALT)
+	(clobber (cc0))]
+	"(!ZIP_USER)"
+	"HALT"
+	[(set_attr "ccresult" "unknown")])
+(define_insn "zip_idle"
+	[(unspec_volatile [(reg:SI CC_REG)] UNSPEC_IDLE)
+	(clobber (cc0))]
+	""
+	"WAIT"
+	[(set_attr "ccresult" "unknown")])
+(define_insn "zip_syscall"
+	[(unspec_volatile [(reg:SI CC_REG)] UNSPEC_SYSCALL)]
+	""
+	"CLR\tCC"
+	[(set_attr "ccresult" "unknown")])
+;
+;
+; Operator "save_context"
+;
+;	operand 0 missing output reload ... ?
+;
+(define_insn "zip_save_context"
+	[(parallel [
+		(unspec_volatile
+			[ (match_operand:SI 0 "register_operand" "r") ]
+			UNSPEC_SAVE_CONTEXT)
+		(clobber (match_scratch:SI 1 "=r"))
+		(clobber (match_scratch:SI 2 "=r"))
+		(clobber (match_scratch:SI 3 "=r"))
+		(clobber (match_scratch:SI 4 "=r"))
+		(use (match_dup 0))])]
+	"(!ZIP_USER)"
+	"MOV\tuR0,%1
+	MOV\tuR1,%2
+	MOV\tuR2,%3
+	MOV\tuR3,%4
+	STO\t%1,%0
+	STO\t%2,1(%0)
+	STO\t%3,2(%0)
+	STO\t%4,3(%0)
+	MOV\tuR4,%1
+	MOV\tuR5,%2
+	MOV\tuR6,%3
+	MOV\tuR7,%4
+	STO\t%1,4(%0)
+	STO\t%2,5(%0)
+	STO\t%3,6(%0)
+	STO\t%4,7(%0)
+	MOV\tuR8,%1
+	MOV\tuR9,%2
+	MOV\tuR10,%3
+	MOV\tuR11,%4
+	STO\t%1,8(%0)
+	STO\t%2,9(%0)
+	STO\t%3,10(%0)
+	STO\t%4,11(%0)
+	MOV\tuR12,%1
+	MOV\tuSP,%2
+	MOV\tuCC,%3
+	MOV\tuPC,%4
+	STO\t%1,12(%0)
+	STO\t%2,13(%0)
+	STO\t%3,14(%0)
+	STO\t%4,15(%0)"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+(define_insn "zip_restore_context"
+	[(unspec_volatile [
+		(match_operand:SI 0 "register_operand" "r")] UNSPEC_RESTORE_CONTEXT)
+		; (match_scratch:SI 1 "r")
+		; (match_scratch:SI 2 "r")
+		; (match_scratch:SI 3 "r")
+		; (match_scratch:SI 4 "r")] 6)
+	(clobber (match_scratch:SI 1 "=r"))
+	(clobber (match_scratch:SI 2 "=r"))
+	(clobber (match_scratch:SI 3 "=r"))
+	(clobber (match_scratch:SI 4 "=r"))
+	(use (match_dup 0))]
+	"(!ZIP_USER)"
+	"LOD\t0(%0),%1
+	LOD\t1(%0),%2
+	LOD\t2(%0),%3
+	LOD\t3(%0),%4
+	MOV\t%1,uR0
+	MOV\t%2,uR1
+	MOV\t%3,uR2
+	MOV\t%4,uR3
+	LOD\t4(%0),%1
+	LOD\t5(%0),%2
+	LOD\t6(%0),%3
+	LOD\t7(%0),%4
+	MOV\t%1,uR4
+	MOV\t%2,uR5
+	MOV\t%3,uR6
+	MOV\t%4,uR7
+	LOD\t8(%0),%1
+	LOD\t9(%0),%2
+	LOD\t10(%0),%3
+	LOD\t11(%0),%4
+	MOV\t%1,uR8
+	MOV\t%2,uR9
+	MOV\t%3,uR10
+	MOV\t%4,uR11
+	LOD\t12(%0),%1
+	LOD\t13(%0),%2
+	LOD\t14(%0),%3
+	LOD\t15(%0),%4
+	MOV\t%1,uR12
+	MOV\t%2,uSP
+	MOV\t%3,uCC
+	MOV\t%4,uPC"
+	[(set_attr "predicable" "no") (set_attr "ccresult" "unknown")])
+(define_insn "zip_bitrev"
+	[(set (match_operand:SI 0 "register_operand" "=r")
+		(unspec:SI [(match_operand:SI 1 "register_operand" "r")] UNSPEC_BITREV))
+	]
+	""
+	"BREV\t%1,%0"
+	[(set_attr "ccresult" "set")])
+(define_insn "zip_cc"
+	[(set (match_operand:SI 0 "register_operand" "=r")
+		(unspec:SI [(reg:SI CC_REG)] UNSPEC_GETCC))]
+	""
+	"MOV\tCC,%0"
+	[(set_attr "ccresult" "unchanged")])
+(define_insn "zip_cc_sto"
+	[(set (mem:SI (match_operand:SI 0 "register_operand" "r"))
+		(unspec:SI [(reg:SI CC_REG)] UNSPEC_GETCC))]
+	""
+	"STO\tCC,(%0)"
+	[(set_attr "ccresult" "unchanged")])
+(define_insn "zip_cc_sto_off"
+	[(set (mem:SI (plus:SI
+			(match_operand:SI 0 "register_operand" "r")
+			(match_operand:SI 1 "const_int_operand" "N")))
+		(unspec:SI [(reg:SI CC_REG)] UNSPEC_GETCC))]
+	""
+	"STO\tCC,%1(%0)"
+	[(set_attr "ccresult" "unchanged")])
+(define_insn "ldilo"
+	[(set (match_operand:SI 0 "register_operand" "=r")
+		(unspec:SI [(match_operand:SI 1 "immediate_operand" "")] UNSPEC_LDILO))]
+	""
+	"LDILO	%1,%0"
+	[(set_attr "predicable" "yes") (set_attr "ccresult" "unchanged")])
+
+;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Floating point Op-codes
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+;
+;
+(define_insn "addsf3"
+	[(set (match_operand:SF 0 "register_operand" "=r")
+		(plus:SF (match_operand:SF 1 "register_operand" "0")
+			(match_operand:SF 2 "register_operand" "r")))]
+	"(ZIP_FPU)"
+	"FPADD	%2,%0"
+	[(set_attr "ccresult" "unknown")])
+(define_insn "subsf3"
+	[(set (match_operand:SF 0 "register_operand" "=r")
+		(minus:SF (match_operand:SF 1 "register_operand" "0")
+			(match_operand:SF 2 "register_operand" "r")))]
+	"(ZIP_FPU)"
+	"FPSUB	%2,%0"
+	[(set_attr "ccresult" "unknown")])
+(define_insn "mulsf3"
+	[(set (match_operand:SF 0 "register_operand" "=r")
+		(mult:SF (match_operand:SF 1 "register_operand" "0")
+			(match_operand:SF 2 "register_operand" "r")))]
+	"(ZIP_FPU)"
+	"FPMUL	%2,%0"
+	[(set_attr "ccresult" "unknown")])
+(define_insn "divsf3"
+	[(set (match_operand:SF 0 "register_operand" "=r")
+		(div:SF (match_operand:SF 1 "register_operand" "0")
+			(match_operand:SF 2 "register_operand" "r")))]
+	"(ZIP_FPU)"
+	"FPDIV	%2,%0"
+	[(set_attr "ccresult" "unknown")])
+(define_expand "negsf2"
+	[(set (match_operand:SF 0 "register_operand" "=r")
+		(neg:SF (match_operand:SF 1 "register_operand" "0")))
+	]
+	""
+	{
+		operands[0] = gen_rtx_SUBREG(SImode, operands[0], 0);
+		if (can_create_pseudo_p()) {
+			rtx tmp = gen_reg_rtx(SImode);
+			emit_insn(gen_movsi_ldi(tmp,gen_int_mode(0x80000000,SImode)));
+			emit_insn(gen_rtx_SET(SImode, operands[0], gen_rtx_XOR(SImode, operands[0], tmp)));
+			DONE;
+		} else {
+			emit_insn(gen_zip_bitrev(operands[0],operands[0]));
+			emit_insn(gen_rtx_SET(SImode, operands[0], gen_rtx_IOR(SImode, operands[0],gen_int_mode(1,SImode))));
+			emit_insn(gen_zip_bitrev(operands[0],operands[0]));
+			DONE;
+		}
+	})
+(define_expand "abssf2"
+	[(set (match_operand:ZI 0 "register_operand" "=r")
+		(abs:ZI (match_operand:ZI 1 "register_operand" "0")))
+	]
+	""
+	{
+		operands[0] = gen_rtx_SUBREG(SImode, operands[0], 0);
+		if (can_create_pseudo_p()) {
+			rtx tmp = gen_reg_rtx(SImode);
+			emit_insn(gen_movsi_ldi(tmp,gen_int_mode(0x7fffffff,SImode)));
+			emit_insn(gen_rtx_SET(SImode, operands[0], gen_rtx_AND(SImode, operands[0], tmp)));
+			DONE;
+		} else {
+			emit_insn(gen_zip_bitrev(operands[0],operands[0]));
+			emit_insn(gen_rtx_SET(SImode, operands[0], 
+				gen_rtx_AND(SImode, operands[0],
+				gen_int_mode(-2,SImode))));
+			emit_insn(gen_zip_bitrev(operands[0],operands[0]));
+			DONE;
+		}
+	})
+;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Trap Instruction
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+;
+; The ZipCPU doesn't really have a "trap" instruction per se.  The goal is that
+; *nothing* should ever trap, and so we should never get here.  However, the
+; compiler seems to want a trap instruction for some reason.  (It keeps us
+; from calling the abort() function, if we don't define these ...)  So let's
+; just grab onto the break instruction and declare it to be a trap instruction
+; for our purposes.  Alternatively, we might've used a syscall, but ... this
+; will work for both user and system instructions.
+;
+(define_insn "trap"
+	[(trap_if (const_int 1) (const_int 0))]
+	""
+	"BREAK"
+	[(set_attr "predicable" "yes") (set_attr "ccresult" "unchanged")])
+;
+(define_expand "ctrap<mode>4"
+	[(set (cc0) (compare (match_operand:ZI 1 "register_operand" "r")
+		(match_operand:ZI 2 "nonmemory_operand" "rO")))
+	(trap_if (match_operator 0 "ordered_comparison_operator"
+			[(cc0) (const_int 0)])
+			(match_operand 3 "const_int_operand" "O"))]
+	""
+	)
+(define_insn "trapif"
+	[(trap_if (match_operator 0 "ordered_comparison_operator"
+			[(cc0) (const_int 0)])
+			(match_operand 1 "const_int_operand" "O"))]
+	""
+	"BREAK\t%1"
+	[(set_attr "predicable" "no")])
+;
+;
+;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;;
+;; Unimplemented (or not yet implemented) RTL Codes
+;;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;
+;
+;
+; The book says that add<mode>3 is used if addptr<mode>3 is undefined.
+; Hence we leave this as unimplemented.
+;
+;(define_insn "addptrsi3"
+;	[(set (match_operand:SI 0 "register_operand" "=r")
+;		(plus:SI (match_operand:SI 1 "register_operand" "r")
+;			(match_operand:SI 2 "general_operand" "M")))]
+;	; Addptr is not allowed to clobber condition codes, thus we *must*
+;	; use the mov (A+B),C form of the add.
+;	""
+;	"MOV	%2(%1),%0"
+;	[(set_attr "ccresult" "unchanged")])
+;
+; (define_insn "casesi"
+;	"LDI	%4,R0
+;	SUB	%2,%1
+;	BLT	%5
+;	CMP	%3,%1
+;	BGT	%5
+;	ADD	%1,R0
+;	LOD	(R0),pc"
+;	"")
+; (define_insn "decrement_and_branch_until_zero"
+	; [(parallel [
+		; (set (match_operand:SI 0 "regiser_operand" "r")
+			; (minus:SI (match_dup 0) (const_int 1)))
+		; (set (pc) (if_then_else
+				; (ge (minus:SI (match_dup 0) (const_int 1)))
+				; (label_ref (match_operand 1 "" ""))
+				; (pc)))])]
+	; ""
+; ;	SUB	1,%0
+; ;	BNZ	%1
+; ;     .vice the faster (optimize for speed)
+	; "SUB	1,%0
+	; BZ	%=
+	; BRA	%1
+	; %=:"
+	; [(set_attr "predicable" "no") (set_attr "ccresult" "set")])
+; doloop_end - do not define--would require cost of an unopt register to use
+; allocate_stack	- do not define ...
+; nonlocal_goto - do not define
+;(define_insn "ctrapmm4"
+;	CMP	%1,%2
+;	MOV.%0	%3,R0
+;	LDILO.%0 0,(CC)
+;
+;(define_insn "sync_compare_and_swapsi"
+;	[(set ...
+;		)]
+;	"(ZIP_ATMOC)"
+;	LOCK		(alu)		// Hmmm ... need to modify if I will
+;	LOD	%1,%0	OP-VALID	// operate on the value before the store
+;	CMP	%0,%2	DCD-valid
+;	STO.Z	%2,%1	PF-valid
+;
+;(define_insn "sync_lock_test_and_setsi"
+;	LOCK
+;	LOD	%1,%0
+;	STO	%0,%1
+;
+;(define_insn "sync_lock_releasesi"
+;	STO	%1,%0
+;
+;
+;(define_insn "negvsi3"
+;	"MOV	%1,%0
+;	XOR	-1,%0
+;	ADD	1,%0
+;	BV	%2"
+;	"")
+
+;
+; STILL MISSING:
+;	SYSCALL(ID)
+;		MOV %ID,R0
+;		CLR	CC
+;	cmove	... the conditional move, created from a
+;	(set (match_op 0 "" "r") (if_then_else (condition) (a) (reg X))))
+;	pattern
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/zip/zip-modes.def gcc-5.3.0-zip/gcc/config/zip/zip-modes.def
--- gcc-5.3.0-original/gcc/config/zip/zip-modes.def	1969-12-31 19:00:00.000000000 -0500
+++ gcc-5.3.0-zip/gcc/config/zip/zip-modes.def	2016-03-08 12:10:21.982586940 -0500
@@ -0,0 +1,23 @@
+/*
+ * Commends in C-long comment form
+ * class
+ *	Mode = "SI"
+ *	PRECISION, BYTESIZE, COUNT ??
+ *	FORMAT
+ *	EXPR
+ *
+ * The manual says I need to define BITS_PER_UNIT here.
+ */
+// INT_MODE(QI, 1);
+// INT_MODE(HI, 1);
+// INT_MODE(SI, 1);
+// INT_MODE(DI, 2);
+
+// FLOAT_MODE(SF, 1, ieee_single_format);
+// FLOAT_MODE(DF, 2, ieee_single_format);
+
+// We cannot override machmodes.def from here.  Thus, even though our QI,
+// HI, and SI modes are all 1-byte, we cant set them that way here.  The
+// change needed to be made in machmodes.def.  Hence, here is a target
+// configuration change--in machmodes.def--that properly belonged in the 
+// config directory.
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config/zip/zip-protos.h gcc-5.3.0-zip/gcc/config/zip/zip-protos.h
--- gcc-5.3.0-original/gcc/config/zip/zip-protos.h	1969-12-31 19:00:00.000000000 -0500
+++ gcc-5.3.0-zip/gcc/config/zip/zip-protos.h	2016-03-12 17:39:02.331344108 -0500
@@ -0,0 +1,70 @@
+////////////////////////////////////////////////////////////////////////////////
+//
+// Filename: 	zip-protos.h
+//
+// Project:	Zip CPU backend for the GNU Compiler Collection
+//
+// Purpose:	
+//
+// Creator:	Dan Gisselquist, Ph.D.
+//		Gisselquist Technology, LLC
+//
+////////////////////////////////////////////////////////////////////////////////
+//
+// Copyright (C) 2016, Gisselquist Technology, LLC
+//
+// This program is free software (firmware): you can redistribute it and/or
+// modify it under the terms of  the GNU General Public License as published
+// by the Free Software Foundation, either version 3 of the License, or (at
+// your option) any later version.
+//
+// This program is distributed in the hope that it will be useful, but WITHOUT
+// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
+// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with this program.  (It's in the $(ROOT)/doc directory, run make with no
+// target there if the PDF file isn't present.)  If not, see
+// <http://www.gnu.org/licenses/> for a copy.
+//
+// License:	GPL, v3, as defined and found on www.gnu.org,
+//		http://www.gnu.org/licenses/gpl.html
+//
+//
+////////////////////////////////////////////////////////////////////////////////
+#ifndef	ZIP_PROTOS_H
+#define	ZIP_PROTOS_H
+
+extern	void	zip_expand_prologue(void);
+extern	void	zip_expand_epilogue(void);
+extern	int	zip_initial_elimination_offset(int, int);
+extern	void	zip_print_operand(FILE *, rtx, int);
+extern	void	zip_print_operand_address(FILE *, rtx);
+extern	enum	reg_class	zip_reg_class(int);
+extern	rtx	zip_return_addr_rtx(int, rtx);
+extern	int	zip_num_arg_regs(enum machine_mode, tree);
+
+extern	void	zip_asm_output_def(FILE *s, const char *n, const char *v);
+extern	void	zip_update_cc_notice(rtx exp, rtx_insn *insn);
+extern	int	zip_address_operand(rtx op);
+extern	int	zip_const_address_operand(rtx op);
+extern	bool	zip_gen_move_rtl(rtx, rtx);
+// extern	bool	zip_load_address_lod(rtx, rtx);
+// extern	bool	zip_load_address_sto(rtx, rtx);
+extern	bool	zip_use_return_insn(void);
+extern const char *zip_set_zero_or_one(rtx, rtx);
+extern const char *zip_movsicc(rtx, rtx, rtx, rtx);
+
+extern	int	zip_ct_address_operand(rtx op);
+extern	int	zip_pd_opb_operand(rtx op);
+extern	int	zip_pd_mov_operand(rtx op);
+extern	int	zip_pd_imm_operand(rtx op);
+extern	int	zip_pd_mvimm_operand(rtx op);
+extern	int	zip_ct_const_address_operand(rtx op);
+extern	int	zip_pd_const_address_operand(rtx op);
+extern	const char *zip_movsicc(rtx, rtx, rtx, rtx);
+extern	const char *zip_addsicc(rtx, rtx, rtx, rtx);
+
+#endif
+
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/config.gcc gcc-5.3.0-zip/gcc/config.gcc
--- gcc-5.3.0-original/gcc/config.gcc	2015-09-10 10:17:53.000000000 -0400
+++ gcc-5.3.0-zip/gcc/config.gcc	2016-02-14 00:53:37.389411987 -0500
@@ -479,6 +479,10 @@
 tilepro*-*-*)
 	cpu_type=tilepro
 	;;
+zip*)
+	cpu_type=zip
+	tmake_file=zip/t-zip
+	;;
 esac
 
 tm_file=${cpu_type}/${cpu_type}.h
@@ -2972,6 +2976,15 @@
 	c_target_objs="m32c-pragma.o"
 	cxx_target_objs="m32c-pragma.o"
  	;;
+zip-*-netbsd*)
+	tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h zip/netbsd.h"
+	tmake_file="${tmake_file} zip/t-zip"
+	;;
+zip*)
+	target_has_targetm_common=yes
+	tm_file="elfos.h newlib-stdint.h ${tm_file}"
+	tmake_file="${tmake_file} zip/t-zip"
+	;;
 *)
 	echo "*** Configuration ${target} not supported" 1>&2
 	exit 1
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/cse.c gcc-5.3.0-zip/gcc/cse.c
--- gcc-5.3.0-original/gcc/cse.c	2015-02-03 15:41:38.000000000 -0500
+++ gcc-5.3.0-zip/gcc/cse.c	2016-03-19 12:28:45.584701098 -0400
@@ -634,6 +634,15 @@
 
 /* Nonzero if X has the form (PLUS frame-pointer integer).  */
 
+// #define	DO_ZIP_DEBUGS
+#ifdef	DO_ZIP_DEBUGS
+#include <stdio.h>
+extern void zip_debug_rtx(const_rtx);
+#define	ZIP_DEBUG_LINE(STR,RTX) do { fprintf(stderr, "%s\n", STR); zip_debug_rtx(RTX); } while(0)
+#else
+#define	ZIP_DEBUG_LINE(STR,RTX)
+#endif
+
 static bool
 fixed_base_plus_p (rtx x)
 {
@@ -2898,6 +2907,7 @@
 	  validate_canon_reg (&XVECEXP (x, i, j), insn);
     }
 
+	ZIP_DEBUG_LINE("CANON-REG-RTN", x);
   return x;
 }
 
@@ -3144,14 +3154,16 @@
   if (x == 0)
     return x;
 
+	ZIP_DEBUG_LINE("FOLD-RTX", x);
   /* Try to perform some initial simplifications on X.  */
   code = GET_CODE (x);
   switch (code)
     {
     case MEM:
     case SUBREG:
-      if ((new_rtx = equiv_constant (x)) != NULL_RTX)
-        return new_rtx;
+      if ((new_rtx = equiv_constant (x)) != NULL_RTX) {
+	ZIP_DEBUG_LINE("FOLD-RTX-NEW", new_rtx);
+        return new_rtx; }
       return x;
 
     case CONST:
@@ -3208,6 +3220,8 @@
 	rtx folded_arg = XEXP (x, i), const_arg;
 	machine_mode mode_arg = GET_MODE (folded_arg);
 
+	ZIP_DEBUG_LINE("FOLD-RTX-ARG = ", folded_arg);
+
 	switch (GET_CODE (folded_arg))
 	  {
 	  case MEM:
@@ -3317,6 +3331,7 @@
 	}
 
       apply_change_group ();
+	ZIP_DEBUG_LINE("FOLD-RTX-CANONICALIZED = ", insn);
     }
 
   /* If X is an arithmetic operation, see if we can simplify it.  */
@@ -4203,6 +4218,7 @@
 {
   rtx dest = SET_DEST (set);
   rtx src = SET_SRC (set);
+	ZIP_DEBUG_LINE("TRY-BACK-SUBSTITUTE-REG", insn);
 
   if (REG_P (dest)
       && REG_P (src) && ! HARD_REGISTER_P (src)
@@ -4258,6 +4274,7 @@
 	    }
 	}
     }
+	ZIP_DEBUG_LINE("TRY-BACK-SUBSTITUTE-REG, done", insn);
 }
 
 /* Record all the SETs in this instruction into SETS_PTR,
@@ -4351,6 +4368,7 @@
   rtx tem;
   rtx x = PATTERN (insn);
   int i;
+	ZIP_DEBUG_LINE("CANONICALIZE-INSN", insn);
 
   if (CALL_P (insn))
     {
@@ -4364,6 +4382,7 @@
       canon_reg (SET_SRC (x), insn);
       apply_change_group ();
       fold_rtx (SET_SRC (x), insn);
+	ZIP_DEBUG_LINE("CANONICALIZE-INSN, was set:", insn);
     }
   else if (GET_CODE (x) == CLOBBER)
     {
@@ -4400,6 +4419,7 @@
     canon_reg (PATTERN (insn), insn);
   else if (GET_CODE (x) == PARALLEL)
     {
+	ZIP_DEBUG_LINE("CANONICALIZE-INSN/parallel", insn);
       for (i = XVECLEN (x, 0) - 1; i >= 0; i--)
 	{
 	  rtx y = XVECEXP (x, 0, i);
@@ -4491,6 +4511,7 @@
 
      The result of apply_change_group can be ignored; see canon_reg.  */
 
+	ZIP_DEBUG_LINE("CANONICALIZE-INSN/done", insn);
   apply_change_group ();
 }
 
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/defaults.h gcc-5.3.0-zip/gcc/defaults.h
--- gcc-5.3.0-original/gcc/defaults.h	2015-03-03 10:04:02.000000000 -0500
+++ gcc-5.3.0-zip/gcc/defaults.h	2016-02-06 16:57:53.939410173 -0500
@@ -480,6 +480,8 @@
 #define LOG2_BITS_PER_UNIT 3
 #elif BITS_PER_UNIT == 16
 #define LOG2_BITS_PER_UNIT 4
+#elif BITS_PER_UNIT == 32
+#define LOG2_BITS_PER_UNIT 5
 #else
 #error Unknown BITS_PER_UNIT
 #endif
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/doc/gcc.log gcc-5.3.0-zip/gcc/doc/gcc.log
--- gcc-5.3.0-original/gcc/doc/gcc.log	1969-12-31 19:00:00.000000000 -0500
+++ gcc-5.3.0-zip/gcc/doc/gcc.log	2016-01-30 15:18:43.262724969 -0500
@@ -0,0 +1,214 @@
+This is pdfTeX, Version 3.1415926-2.5-1.40.14 (TeX Live 2013/Debian) (format=pdfetex 2014.5.7)  30 JAN 2016 15:17
+entering extended mode
+ restricted \write18 enabled.
+ file:line:error style messages enabled.
+ %&-line parsing enabled.
+**\catcode126=12 \def\normaltilde{~}\catcode126=13 \let~\normaltilde  \input ./
+gcc.texi
+(./gcc.texi (/usr/share/texmf/tex/texinfo/texinfo.tex
+Loading texinfo [version 2013-09-11.11]:
+\bindingoffset=\dimen16
+\normaloffset=\dimen17
+\pagewidth=\dimen18
+\pageheight=\dimen19
+\outerhsize=\dimen20
+\outervsize=\dimen21
+\cornerlong=\dimen22
+\cornerthick=\dimen23
+\topandbottommargin=\dimen24
+\headlinebox=\box16
+\footlinebox=\box17
+\margin=\insert252
+\EMsimple=\toks13
+\groupbox=\box18
+\groupinvalidhelp=\toks14
+\mil=\dimen25
+\exdentamount=\skip18
+\inmarginspacing=\skip19
+\centerpenalty=\count27
+ pdf,
+\tempnum=\count28
+\lnkcount=\count29
+\filename=\toks15
+\filenamelength=\count30
+\pgn=\count31
+\toksA=\toks16
+\toksB=\toks17
+\toksC=\toks18
+\toksD=\toks19
+\boxA=\box19
+\countA=\count32
+\nopdfimagehelp=\toks20
+ fonts,
+\sffam=\fam8
+\textleading=\dimen26
+ markup,
+\fontdepth=\count33
+ glyphs,
+\errorbox=\box20
+
+page headings,
+\titlepagetopglue=\skip20
+\titlepagebottomglue=\skip21
+\evenheadline=\toks21
+\oddheadline=\toks22
+\evenfootline=\toks23
+\oddfootline=\toks24
+ tables,
+\tableindent=\dimen27
+\itemindent=\dimen28
+\itemmargin=\dimen29
+\itemmax=\dimen30
+\itemno=\count34
+\multitableparskip=\skip22
+\multitableparindent=\skip23
+\multitablecolspace=\dimen31
+\multitablelinespace=\skip24
+\colcount=\count35
+\everytab=\toks25
+ conditionals,
+\doignorecount=\count36
+ indexing,
+\whatsitskip=\skip25
+\whatsitpenalty=\count37
+\secondaryindent=\skip26
+\partialpage=\box21
+\doublecolumnhsize=\dimen32
+ sectioning,
+\unnumberedno=\count38
+\chapno=\count39
+\secno=\count40
+\subsecno=\count41
+\subsubsecno=\count42
+\appendixno=\count43
+\absseclevel=\count44
+\secbase=\count45
+\chapheadingskip=\skip27
+\secheadingskip=\skip28
+\subsecheadingskip=\skip29
+ toc,
+\tocfile=\write0
+\contentsrightmargin=\skip30
+\savepageno=\count46
+\lastnegativepageno=\count47
+\tocindent=\dimen33
+ environments,
+\lispnarrowing=\skip31
+\envskipamount=\skip32
+\circthick=\dimen34
+\cartouter=\dimen35
+\cartinner=\dimen36
+\normbskip=\skip33
+\normpskip=\skip34
+\normlskip=\skip35
+\lskip=\skip36
+\rskip=\skip37
+\nonfillparindent=\dimen37
+\tabw=\dimen38
+\verbbox=\box22
+
+defuns,
+\defbodyindent=\skip38
+\defargsindent=\skip39
+\deflastargmargin=\skip40
+\defunpenalty=\count48
+\parencount=\count49
+\brackcount=\count50
+ macros,
+\paramno=\count51
+\macname=\toks26
+ cross references,
+\auxfile=\write1
+\savesfregister=\count52
+\toprefbox=\box23
+\printedrefnamebox=\box24
+\infofilenamebox=\box25
+\printedmanualbox=\box26
+ insertions,
+\footnoteno=\count53
+\SAVEfootins=\box27
+\SAVEmargin=\box28
+
+(/usr/share/texlive/texmf-dist/tex/generic/epsf/epsf.tex
+This is `epsf.tex' v2.7.4 <14 February 2011>
+\epsffilein=\read1
+\epsfframemargin=\dimen39
+\epsfframethickness=\dimen40
+\epsfrsize=\dimen41
+\epsftmp=\dimen42
+\epsftsize=\dimen43
+\epsfxsize=\dimen44
+\epsfysize=\dimen45
+\pspoints=\dimen46
+)
+\noepsfhelp=\toks27
+ localization,
+\nolanghelp=\toks28
+\countUTFx=\count54
+\countUTFy=\count55
+\countUTFz=\count56
+ formatting,
+\defaultparindent=\dimen47
+ and turning on texinfo input format.)
+\openout1 = `gcc.aux'.
+
+@cpindfile=@write2
+@fnindfile=@write3
+@vrindfile=@write4
+@tpindfile=@write5
+@kyindfile=@write6
+@pgindfile=@write7
+texinfo.tex: doing @include of gcc-common.texi
+
+
+./gcc.texi:25: I can't find file `gcc-common.texi'.
+@temp ->@input gcc-common.texi 
+                               
+@includezzz ...and @input #1 }@expandafter }@temp 
+                                                  @popthisfilestack 
+l.25 @include gcc-common.texi
+                             
+(Press Enter to retry, or Control-D to exit)
+Please type another input file name: include/gcc-common.texi
+(./include/gcc-common.texi
+texinfo.tex: doing @include of gcc-vers.texi
+
+
+./include/gcc-common.texi:11: I can't find file `gcc-vers.texi'.
+@temp ->@input gcc-vers.texi 
+                             
+@includezzz ...and @input #1 }@expandafter }@temp 
+                                                  @popthisfilestack 
+l.11 @include gcc-vers.texi
+                           
+(Press Enter to retry, or Control-D to exit)
+Please type another input file name: include/gcc-vers.texi
+./include/gcc-common.texi:11: I can't find file `include/gcc-vers.texi'.
+@temp ->@input gcc-vers.texi 
+                             
+@includezzz ...and @input #1 }@expandafter }@temp 
+                                                  @popthisfilestack 
+l.11 @include gcc-vers.texi
+                           
+(Press Enter to retry, or Control-D to exit)
+Please type another input file name: 
+./include/gcc-common.texi:11: I can't find file `include/gcc-vers.texi'.
+@temp ->@input gcc-vers.texi 
+                             
+@includezzz ...and @input #1 }@expandafter }@temp 
+                                                  @popthisfilestack 
+l.11 @include gcc-vers.texi
+                           
+(Press Enter to retry, or Control-D to exit)
+Please type another input file name: 
+./include/gcc-common.texi:11: Emergency stop.
+@temp ->@input gcc-vers.texi 
+                             
+@includezzz ...and @input #1 }@expandafter }@temp 
+                                                  @popthisfilestack 
+l.11 @include gcc-vers.texi
+                           
+End of file on the terminal!
+
+./include/gcc-common.texi:11:  ==> Fatal error occurred, no output PDF file pro
+duced!
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/expr.c gcc-5.3.0-zip/gcc/expr.c
--- gcc-5.3.0-original/gcc/expr.c	2015-04-07 10:34:06.000000000 -0400
+++ gcc-5.3.0-zip/gcc/expr.c	2016-03-08 04:07:01.426335724 -0500
@@ -7999,6 +7999,8 @@
    the back of the caller.
    The normal operating mode is to pass FALSE for this parameter.  */
 
+#include "print-tree.h"
+
 rtx
 expand_expr_real (tree exp, rtx target, machine_mode tmode,
 		  enum expand_modifier modifier, rtx *alt_rtl,
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/final.c gcc-5.3.0-zip/gcc/final.c
--- gcc-5.3.0-original/gcc/final.c	2015-01-15 08:28:42.000000000 -0500
+++ gcc-5.3.0-zip/gcc/final.c	2016-03-24 22:12:00.263845620 -0400
@@ -109,6 +109,14 @@
 #include "wide-int-print.h"
 #include "rtl-iter.h"
 
+
+#ifdef	DO_ZIP_DEBUGS
+extern void zip_debug_rtx(const_rtx);
+#define	ZIP_DEBUG_LINE(STR,RTX) do { fprintf(stderr, "%s:%d/%s\n", __FILE__,__LINE__,STR); zip_debug_rtx(RTX); } while(0)
+#else
+#define	ZIP_DEBUG_LINE(STR,RTX)
+#endif
+
 #ifdef XCOFF_DEBUGGING_INFO
 #include "xcoffout.h"		/* Needed for external data
 				   declarations for e.g. AIX 4.x.  */
@@ -2071,6 +2079,8 @@
   /* Output the insns.  */
   for (insn = first; insn;)
     {
+	ZIP_DEBUG_LINE("final()\n", insn);
+
       if (HAVE_ATTR_length)
 	{
 	  if ((unsigned) INSN_UID (insn) >= INSN_ADDRESSES_SIZE ())
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/genmodes.c gcc-5.3.0-zip/gcc/genmodes.c
--- gcc-5.3.0-original/gcc/genmodes.c	2015-01-05 07:33:28.000000000 -0500
+++ gcc-5.3.0-zip/gcc/genmodes.c	2016-03-04 21:27:49.669147699 -0500
@@ -330,7 +330,8 @@
 	 the size of a CC mode is four units.  */
       validate_mode (m, UNSET, UNSET, UNSET, UNSET, UNSET);
 
-      m->bytesize = 4;
+	/* For the ZipCPU, however, it is only one unit */
+      m->bytesize = 1;
       m->ncomponents = 1;
       m->component = 0;
       break;
@@ -766,11 +767,12 @@
 
   /* So put the default value unless the target needs a non standard
      value. */
-#ifdef BITS_PER_UNIT
-  bits_per_unit = BITS_PER_UNIT;
-#else
-  bits_per_unit = 8;
-#endif
+// #ifdef BITS_PER_UNIT
+  // bits_per_unit = BITS_PER_UNIT;
+// #else
+  bits_per_unit = 32;
+#warning "Is there a more automated way to set bits per unit?"
+// #endif
 
 #ifdef MAX_BITSIZE_MODE_ANY_INT
   max_bitsize_mode_any_int = MAX_BITSIZE_MODE_ANY_INT;
@@ -1083,7 +1085,7 @@
       first = modes[c];
       last = 0;
       for (m = first; m; last = m, m = m->next)
-	;
+	if ((m->next)&&(m->next->bytesize == m->bytesize)) first = m;
 
       /* Don't use BImode for MIN_MODE_INT, since otherwise the middle
 	 end will try to use it for bitfields in structures and the
@@ -1268,7 +1270,7 @@
 	    continue;
 	  if (m->precision != (unsigned int) -1)
 	    {
-	      if (m2->precision != 2 * m->precision)
+	      if (m2->precision < 2 * m->precision)
 		continue;
 	    }
 	  else
@@ -1323,7 +1325,6 @@
       tagged_printf ("MODE_MASK (%u)", m->precision, m->name);
     else
       tagged_printf ("MODE_MASK (%u*BITS_PER_UNIT)", m->bytesize, m->name);
-
   puts ("#undef MODE_MASK");
   print_closer ();
 }
@@ -1351,12 +1352,23 @@
   int c;
   struct mode_data *m;
 
+  puts(
+"\n\n/* This is a rather strange conundrum.  Alignment is used by the host in\n"
+" * the assembly file, whereas the size is used by the target.  Thus, for\n"
+" * now, to align to a single target word means to align to 4 8-bit bytes in\n"
+" * assembly.  If you get it wrong, the assembler will try to help.  Thus,\n"
+" * aligning to anything less than 4 (1 target word) will cause an alignment\n"
+" * of the target word in size.  However, this tries to do a little something\n"
+" * teach our compiler what we are doing.\n"
+" */\n");
   print_maybe_const_decl ("%sunsigned char",
 			  "mode_base_align", "NUM_MACHINE_MODES",
 			  alignment);
 
   for_all_modes (c, m)
-    tagged_printf ("%u", m->alignment, m->name);
+    tagged_printf ("%u", 4*m->bytesize,
+		// m->alignment,
+		m->name);
 
   print_closer ();
 }
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/machmode.def gcc-5.3.0-zip/gcc/machmode.def
--- gcc-5.3.0-original/gcc/machmode.def	2015-01-05 07:33:28.000000000 -0500
+++ gcc-5.3.0-zip/gcc/machmode.def	2016-03-08 11:56:45.375491523 -0500
@@ -184,11 +184,11 @@
    larger types, then corresponding modes must be added here.  The
    name OI is reserved for a 256-bit type (needed by some back ends).
     */
-INT_MODE (QI, 1);
-INT_MODE (HI, 2);
-INT_MODE (SI, 4);
-INT_MODE (DI, 8);
-INT_MODE (TI, 16);
+// INT_MODE (QI, 1);
+// INT_MODE (HI, 1);
+INT_MODE (SI, 1);
+INT_MODE (DI, 2);
+INT_MODE (TI, 4);
 
 /* No partial integer modes are defined by default.  */
 
@@ -206,35 +206,35 @@
    These are the IEEE mappings.  They can be overridden with
    RESET_FLOAT_FORMAT or at runtime (in TARGET_OPTION_OVERRIDE).  */
 
-FLOAT_MODE (SF, 4, ieee_single_format);
-FLOAT_MODE (DF, 8, ieee_double_format);
+FLOAT_MODE (SF, 1, ieee_single_format);
+FLOAT_MODE (DF, 2, ieee_double_format);
 
 /* Basic CC modes.
    FIXME define this only for targets that need it.  */
 CC_MODE (CC);
 
 /* Fixed-point modes.  */
-FRACT_MODE (QQ, 1, 7); /* s.7 */
-FRACT_MODE (HQ, 2, 15); /* s.15 */
-FRACT_MODE (SQ, 4, 31); /* s.31 */
-FRACT_MODE (DQ, 8, 63); /* s.63 */
-FRACT_MODE (TQ, 16, 127); /* s.127 */
-
-UFRACT_MODE (UQQ, 1, 8); /* .8 */
-UFRACT_MODE (UHQ, 2, 16); /* .16 */
-UFRACT_MODE (USQ, 4, 32); /* .32 */
-UFRACT_MODE (UDQ, 8, 64); /* .64 */
-UFRACT_MODE (UTQ, 16, 128); /* .128 */
-
-ACCUM_MODE (HA, 2, 8, 7); /* s8.7 */
-ACCUM_MODE (SA, 4, 16, 15); /* s16.15 */
-ACCUM_MODE (DA, 8, 32, 31); /* s32.31 */
-ACCUM_MODE (TA, 16, 64, 63); /* s64.63 */
-
-UACCUM_MODE (UHA, 2, 8, 8); /* 8.8 */
-UACCUM_MODE (USA, 4, 16, 16); /* 16.16 */
-UACCUM_MODE (UDA, 8, 32, 32); /* 32.32 */
-UACCUM_MODE (UTA, 16, 64, 64); /* 64.64 */
+/* FRACT_MODE (QQ, 1, 7); /* s.7 */
+/* FRACT_MODE (HQ, 1, 15); /* s.15 */
+FRACT_MODE (SQ, 1, 31); /* s.31 */
+FRACT_MODE (DQ, 2, 63); /* s.63 */
+FRACT_MODE (TQ, 4, 127); /* s.127 */
+
+/* UFRACT_MODE (UQQ, 1, 8); /* .8 */
+/* UFRACT_MODE (UHQ, 1, 16); /* .16 */
+UFRACT_MODE (USQ, 1, 32); /* .32 */
+UFRACT_MODE (UDQ, 2, 64); /* .64 */
+UFRACT_MODE (UTQ, 4, 128); /* .128 */
+
+/* ACCUM_MODE (HA, 2, 8, 7); /* s8.7 */
+ACCUM_MODE (SA, 1, 16, 15); /* s16.15 */
+ACCUM_MODE (DA, 2, 32, 31); /* s32.31 */
+ACCUM_MODE (TA, 4, 64, 63); /* s64.63 */
+
+/* UACCUM_MODE (UHA, 2, 8, 8); /* 8.8 */
+UACCUM_MODE (USA, 1, 16, 16); /* 16.16 */
+UACCUM_MODE (UDA, 2, 32, 32); /* 32.32 */
+UACCUM_MODE (UTA, 4, 64, 64); /* 64.64 */
 
 /* Allow the target to specify additional modes of various kinds.  */
 #if HAVE_EXTRA_MODES
@@ -246,9 +246,9 @@
 COMPLEX_MODES (FLOAT);
 
 /* Decimal floating point modes.  */
-DECIMAL_FLOAT_MODE (SD, 4, decimal_single_format);
-DECIMAL_FLOAT_MODE (DD, 8, decimal_double_format);
-DECIMAL_FLOAT_MODE (TD, 16, decimal_quad_format);
+DECIMAL_FLOAT_MODE (SD, 1, decimal_single_format);
+DECIMAL_FLOAT_MODE (DD, 2, decimal_double_format);
+DECIMAL_FLOAT_MODE (TD, 4, decimal_quad_format);
 
 /* The symbol Pmode stands for one of the above machine modes (usually SImode).
    The tm.h file specifies which one.  It is not a distinct mode.  */
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/machmode.h gcc-5.3.0-zip/gcc/machmode.h
--- gcc-5.3.0-original/gcc/machmode.h	2015-01-05 07:33:28.000000000 -0500
+++ gcc-5.3.0-zip/gcc/machmode.h	2016-02-06 17:21:49.592924065 -0500
@@ -180,13 +180,7 @@
 /* Get the size in bytes and bits of an object of mode MODE.  */
 
 extern CONST_MODE_SIZE unsigned char mode_size[NUM_MACHINE_MODES];
-#if GCC_VERSION >= 4001
-#define GET_MODE_SIZE(MODE) \
-  ((unsigned short) (__builtin_constant_p (MODE) \
-		     ? mode_size_inline (MODE) : mode_size[MODE]))
-#else
 #define GET_MODE_SIZE(MODE)    ((unsigned short) mode_size[MODE])
-#endif
 #define GET_MODE_BITSIZE(MODE) \
   ((unsigned short) (GET_MODE_SIZE (MODE) * BITS_PER_UNIT))
 
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/objc/objc-encoding.c gcc-5.3.0-zip/gcc/objc/objc-encoding.c
--- gcc-5.3.0-original/gcc/objc/objc-encoding.c	2015-01-09 15:18:42.000000000 -0500
+++ gcc-5.3.0-zip/gcc/objc/objc-encoding.c	2016-03-04 22:53:40.431902505 -0500
@@ -765,10 +765,14 @@
 	{
 	  switch (TYPE_MODE (type))
 	    {
+#ifdef	HAVE_QImode
 	    case QImode:
 	      charType = 'C'; break;
+#endif
+#ifdef	HAVE_HImode
 	    case HImode:
 	      charType = 'S'; break;
+#endif
 	    case SImode:
 	      {
 		if (type == long_unsigned_type_node)
@@ -788,10 +792,14 @@
 	{
 	  switch (TYPE_MODE (type))
 	    {
+#ifdef	HAVE_QImode
 	    case QImode:
 	      charType = 'c'; break;
+#endif
+#ifdef	HAVE_HImode
 	    case HImode:
 	      charType = 's'; break;
+#endif
 	    case SImode:
 	      {
 		if (type == long_integer_type_node)
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/postreload.c gcc-5.3.0-zip/gcc/postreload.c
--- gcc-5.3.0-original/gcc/postreload.c	2015-07-17 09:50:38.000000000 -0400
+++ gcc-5.3.0-zip/gcc/postreload.c	2016-03-24 21:30:23.402590035 -0400
@@ -71,6 +71,14 @@
 #include "df.h"
 #include "dbgcnt.h"
 
+// #define	DO_ZIP_DEBUGS
+#ifdef	DO_ZIP_DEBUGS
+extern void zip_debug_rtx(const_rtx);
+#define	ZIP_DEBUG_LINE(STR,RTX) do { fprintf(stderr, "%s:%d/%s\n", __FILE__,__LINE__,STR); zip_debug_rtx(RTX); } while(0)
+#else
+#define	ZIP_DEBUG_LINE(STR,RTX)
+#endif
+
 static int reload_cse_noop_set_p (rtx);
 static bool reload_cse_simplify (rtx_insn *, rtx);
 static void reload_cse_regs_1 (void);
@@ -120,6 +128,8 @@
   basic_block insn_bb = BLOCK_FOR_INSN (insn);
   unsigned insn_bb_succs = EDGE_COUNT (insn_bb->succs);
 
+	ZIP_DEBUG_LINE("RELOAD-CSE-SIMPLIFY:",insn);
+
   if (GET_CODE (body) == SET)
     {
       int count = 0;
@@ -147,6 +157,7 @@
 	apply_change_group ();
       else
 	reload_cse_simplify_operands (insn, testreg);
+	ZIP_DEBUG_LINE("End of reload_cse_simplify_operands", insn);
     }
   else if (GET_CODE (body) == PARALLEL)
     {
@@ -205,6 +216,7 @@
 	apply_change_group ();
       else
 	reload_cse_simplify_operands (insn, testreg);
+	ZIP_DEBUG_LINE("End of reload_cse_simplify_operands", insn);
     }
 
 done:
@@ -246,6 +258,7 @@
 	  cfg_changed |= reload_cse_simplify (insn, testreg);
 
 	cselib_process_insn (insn);
+	ZIP_DEBUG_LINE("End-CSE-REGS-1:",insn);
       }
 
   /* Clean up.  */
@@ -276,6 +289,8 @@
 #endif
   bool speed = optimize_bb_for_speed_p (BLOCK_FOR_INSN (insn));
 
+
+	ZIP_DEBUG_LINE("RELOAD:Attempting to simplify set",set);
   dreg = true_regnum (SET_DEST (set));
   if (dreg < 0)
     return 0;
@@ -427,6 +442,7 @@
   /* Array of alternatives, sorted in order of decreasing desirability.  */
   int *alternative_order;
 
+	ZIP_DEBUG_LINE("Simplify-Operands", insn);
   extract_constrain_insn (insn);
 
   if (recog_data.n_alternatives == 0 || recog_data.n_operands == 0)
@@ -519,6 +535,7 @@
 	  SET_HARD_REG_BIT (equiv_regs[i], REGNO (l->loc));
     }
 
+	ZIP_DEBUG_LINE("Simplify-Operands - A", insn);
   alternative_mask preferred = get_preferred_alternatives (insn);
   for (i = 0; i < recog_data.n_operands; i++)
     {
@@ -617,6 +634,7 @@
 	    }
 	}
     }
+	ZIP_DEBUG_LINE("Simplify-Operands - B", insn);
 
   /* Record all alternatives which are better or equal to the currently
      matching one in the alternative_order array.  */
@@ -666,6 +684,7 @@
       validate_change (insn, recog_data.operand_loc[i],
 		       gen_rtx_REG (mode, op_alt_regno[i][j]), 1);
     }
+	ZIP_DEBUG_LINE("Simplify-Operands - C", insn);
 
   for (i = recog_data.n_dups - 1; i >= 0; i--)
     {
@@ -679,6 +698,7 @@
 		       gen_rtx_REG (mode, op_alt_regno[op][j]), 1);
     }
 
+	ZIP_DEBUG_LINE("Simplify-Operands - C", insn);
   return apply_change_group ();
 }
 
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/reload.c gcc-5.3.0-zip/gcc/reload.c
--- gcc-5.3.0-original/gcc/reload.c	2015-01-15 08:28:42.000000000 -0500
+++ gcc-5.3.0-zip/gcc/reload.c	2016-03-19 12:28:30.592811127 -0400
@@ -2707,8 +2707,17 @@
     no_output_reloads = 1;
 
 #ifdef HAVE_cc0
+  // If the instruction depends upon cc0, such as a branch, if_then_else, or
+  // cond_exec instruction, we cannot change the input so that the instruction
+  // relies on another register--cc0 is specific.  This requries that the
+  // references be only cc0 and (const_int 0), rather than allowing other
+  // registers here as well.
   if (reg_referenced_p (cc0_rtx, PATTERN (insn)))
     no_input_reloads = 1;
+  // If the result of an instruction is the cc0 register, that cannot
+  // be changed, therefore no output reloading is allowed.  This only
+  // works if instructions *only* set the cc0 register, and not multiple
+  // registers.
   if (reg_set_p (cc0_rtx, PATTERN (insn)))
     no_output_reloads = 1;
 #endif
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/testsuite/lib/target-supports.exp gcc-5.3.0-zip/gcc/testsuite/lib/target-supports.exp
--- gcc-5.3.0-original/gcc/testsuite/lib/target-supports.exp	2015-11-26 05:10:58.000000000 -0500
+++ gcc-5.3.0-zip/gcc/testsuite/lib/target-supports.exp	2016-01-30 15:14:21.620586694 -0500
@@ -503,6 +503,11 @@
 	return 0
     }
 
+    # Zip CPU doesn't support profiling (yet)
+    if { [istarget zip*] }
+        return 0
+    }
+
     # MinGW does not support -p.
     if { [istarget *-*-mingw*] && $test_what == "-p" } {
 	return 0
@@ -986,6 +991,12 @@
 	}]
     }
 
+    # No real hardware FPU support for ZipCPU yet--even though the instruction
+    # set supports it, the CPU just isn't ready yet.
+    if { [istarget zip*-*-*] } {
+        return 0
+    }
+
     # This proc is actually checking the availabilty of FPU
     # support for doubles, so on the RX we must fail if the
     # 64-bit double multilib has been selected.
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/tree-ssa-math-opts.c gcc-5.3.0-zip/gcc/tree-ssa-math-opts.c
--- gcc-5.3.0-original/gcc/tree-ssa-math-opts.c	2015-08-11 03:58:07.000000000 -0400
+++ gcc-5.3.0-zip/gcc/tree-ssa-math-opts.c	2016-02-12 11:21:11.309149239 -0500
@@ -972,7 +972,7 @@
     {
       if (val & 1)
 	{
-	  digit = val & ((1 << POWI_WINDOW_SIZE) - 1);
+	  digit = val & ((1l << POWI_WINDOW_SIZE) - 1);
 	  result += powi_lookup_cost (digit, cache)
 		    + POWI_WINDOW_SIZE + 1;
 	  val >>= POWI_WINDOW_SIZE;
@@ -1012,7 +1012,7 @@
     }
   else if (n & 1)
     {
-      digit = n & ((1 << POWI_WINDOW_SIZE) - 1);
+      digit = n & ((1l << POWI_WINDOW_SIZE) - 1);
       op0 = powi_as_mults_1 (gsi, loc, type, n - digit, cache);
       op1 = powi_as_mults_1 (gsi, loc, type, digit, cache);
     }
@@ -1651,7 +1651,7 @@
 };
 
 #define BITS_PER_MARKER 8
-#define MARKER_MASK ((1 << BITS_PER_MARKER) - 1)
+#define MARKER_MASK ((1l << BITS_PER_MARKER) - 1)
 #define MARKER_BYTE_UNKNOWN MARKER_MASK
 #define HEAD_MARKER(n, size) \
   ((n) & ((uint64_t) MARKER_MASK << (((size) - 1) * BITS_PER_MARKER)))
@@ -1687,7 +1687,7 @@
   /* Zero out the extra bits of N in order to avoid them being shifted
      into the significant bits.  */
   if (size < 64 / BITS_PER_MARKER)
-    n->n &= ((uint64_t) 1 << (size * BITS_PER_MARKER)) - 1;
+    n->n &= ((uint64_t) 1l << (size * BITS_PER_MARKER)) - 1;
 
   switch (code)
     {
@@ -1714,7 +1714,7 @@
     }
   /* Zero unused bits for size.  */
   if (size < 64 / BITS_PER_MARKER)
-    n->n &= ((uint64_t) 1 << (size * BITS_PER_MARKER)) - 1;
+    n->n &= ((uint64_t) 1l << (size * BITS_PER_MARKER)) - 1;
   return true;
 }
 
@@ -1761,7 +1761,7 @@
   n->n = CMPNOP;
 
   if (size < 64 / BITS_PER_MARKER)
-    n->n &= ((uint64_t) 1 << (size * BITS_PER_MARKER)) - 1;
+    n->n &= ((uint64_t) 1l << (size * BITS_PER_MARKER)) - 1;
 
   return true;
 }
@@ -2020,7 +2020,7 @@
 	  {
 	    int i, size = TYPE_PRECISION (n->type) / BITS_PER_UNIT;
 	    uint64_t val = int_cst_value (rhs2), mask = 0;
-	    uint64_t tmp = (1 << BITS_PER_UNIT) - 1;
+	    uint64_t tmp = (1l << BITS_PER_UNIT) - 1;
 
 	    /* Only constants masking full bytes are allowed.  */
 	    for (i = 0; i < size; i++, tmp <<= BITS_PER_UNIT)
@@ -2064,7 +2064,7 @@
 	      {
 		/* If STMT casts to a smaller type mask out the bits not
 		   belonging to the target type.  */
-		n->n &= ((uint64_t) 1 << (type_size * BITS_PER_MARKER)) - 1;
+		n->n &= ((uint64_t) 1l << (type_size * BITS_PER_MARKER)) - 1;
 	      }
 	    n->type = type;
 	    if (!n->base_addr)
@@ -2177,7 +2177,7 @@
     {
       uint64_t mask;
 
-      mask = ((uint64_t) 1 << (n->range * BITS_PER_MARKER)) - 1;
+      mask = ((uint64_t) 1l << (n->range * BITS_PER_MARKER)) - 1;
       cmpxchg >>= (64 / BITS_PER_MARKER - n->range) * BITS_PER_MARKER;
       cmpnop &= mask;
     }
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/gcc/var-tracking.c gcc-5.3.0-zip/gcc/var-tracking.c
--- gcc-5.3.0-original/gcc/var-tracking.c	2015-03-26 09:19:00.000000000 -0400
+++ gcc-5.3.0-zip/gcc/var-tracking.c	2016-03-19 09:31:12.636242911 -0400
@@ -143,6 +143,13 @@
 #include "rtl-iter.h"
 #include "fibonacci_heap.h"
 
+#ifdef	DO_ZIP_DEBUG
+#include <stdio.h>
+extern void zip_debug_rtx(const_rtx);
+#define ZIP_DEBUG_LINE(STR,RTX) do {fprintf(stderr,"%s:%d/%s\n",__FILE__,__LINE__,STR); zip_debug_rtx(RTX); } while(0)
+#else
+#define ZIP_DEBUG_LINE(STR,RTX)
+#endif
 typedef fibonacci_heap <long, basic_block_def> bb_heap_t;
 typedef fibonacci_node <long, basic_block_def> bb_heap_node_t;
 
@@ -6356,6 +6363,7 @@
 		machine_mode indmode
 		  = TYPE_MODE (TREE_TYPE (argtype));
 		rtx mem = gen_rtx_MEM (indmode, x);
+			ZIP_DEBUG_LINE("Var-tracking mem-ref", mem);
 		cselib_val *val = cselib_lookup (mem, indmode, 0, VOIDmode);
 		if (val && cselib_preserved_value_p (val))
 		  {
@@ -6462,12 +6470,14 @@
       machine_mode mode
 	= TYPE_MODE (TREE_TYPE (OBJ_TYPE_REF_EXPR (obj_type_ref)));
       rtx clobbered = gen_rtx_MEM (mode, this_arg);
+			ZIP_DEBUG_LINE("Var-tracking mem-ref/clobbered", clobbered);
       HOST_WIDE_INT token
 	= tree_to_shwi (OBJ_TYPE_REF_TOKEN (obj_type_ref));
       if (token)
 	clobbered = plus_constant (mode, clobbered,
 				   token * GET_MODE_SIZE (mode));
       clobbered = gen_rtx_MEM (mode, clobbered);
+	ZIP_DEBUG_LINE("Var-tracking mem-ref/clobbered-2", clobbered);
       x = gen_rtx_CONCAT (mode, gen_rtx_CLOBBER (VOIDmode, pc_rtx), clobbered);
       call_arguments
 	= gen_rtx_EXPR_LIST (VOIDmode, x, call_arguments);
@@ -9790,6 +9800,7 @@
 	      machine_mode indmode
 		= TYPE_MODE (TREE_TYPE (TREE_TYPE (parm)));
 	      rtx mem = gen_rtx_MEM (indmode, incoming);
+	ZIP_DEBUG_LINE("Var-tracking mem-ref/incoming", incoming);
 	      cselib_val *val = cselib_lookup_from_insn (mem, indmode, true,
 							 VOIDmode,
 							 get_insns ());
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/libgcc/config.host gcc-5.3.0-zip/libgcc/config.host
--- gcc-5.3.0-original/libgcc/config.host	2015-10-01 08:01:18.000000000 -0400
+++ gcc-5.3.0-zip/libgcc/config.host	2016-01-30 15:16:00.459883558 -0500
@@ -195,6 +195,9 @@
 tic6x-*-*)
 	cpu_type=c6x
 	;;
+zip*)
+	cpu_type=zip
+	;;
 esac
 
 # Common parts for widely ported systems.
@@ -1300,6 +1303,9 @@
 	echo "*** Configuration ${host} not supported" 1>&2
 	exit 1
 	;;
+zip*)
+	tmake_file="${tmake_file} t-softfp-sfdf t-softfp"
+	;;
 esac
 
 case ${host} in
diff -Naur '--exclude=*.swp' gcc-5.3.0-original/libgomp/configure.tgt gcc-5.3.0-zip/libgomp/configure.tgt
--- gcc-5.3.0-original/libgomp/configure.tgt	2015-03-13 06:57:07.000000000 -0400
+++ gcc-5.3.0-zip/libgomp/configure.tgt	2016-01-30 15:16:51.323521641 -0500
@@ -150,6 +150,9 @@
 	# Need to link with -lpthread so libgomp.so is self-contained.
 	XLDFLAGS="${XLDFLAGS} -lpthread"
 	;;
+  zip*)
+        config_path="bsd posix"
+        ;;
 
   *)
 	;;
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.