Subversion Repositories zx_ula

////////////////////////////////////////////////////////////////////////////////
// Copyright (c) 1995-2010 Xilinx, Inc.  All rights reserved.
////////////////////////////////////////////////////////////////////////////////
//   ____  ____ 
//  /   /\/   / 
// /___/  \  /    Vendor: Xilinx 
// \   \   \/     Version : 12.4
//  \   \         Application : xaw2verilog
//  /   /         Filename : master_clock.v
// /___/   /\     Timestamp : 04/21/2012 19:26:35
// \   \  /  \ 
//  \___\/\___\ 
//
//Command: xaw2verilog -st C:\\proyectos_xilinx\ulaplus\ipcore_dir\.\master_clock.xaw C:\\proyectos_xilinx\ulaplus\ipcore_dir\.\master_clock
//Design Name: master_clock
//Device: xc3s1000-ft256-4
//
// Module master_clock
// Generated by Xilinx Architecture Wizard
// Written for synthesis tool: XST
// Period Jitter (unit interval) for block DCM_INST = 0.05 UI
// Period Jitter (Peak-to-Peak) for block DCM_INST = 1.92 ns
`timescale 1ns / 1ps
 
module master_clock(CLKIN_IN, 
                     CLKFX_OUT, 
                     CLKIN_IBUFG_OUT, 
                     CLK0_OUT);
 
    input CLKIN_IN;
   output CLKFX_OUT;
   output CLKIN_IBUFG_OUT;
   output CLK0_OUT;
 
   wire CLKFB_IN;
   wire CLKFX_BUF;
   wire CLKIN_IBUFG;
   wire CLK0_BUF;
   wire GND_BIT;
 
   assign GND_BIT = 0;
   assign CLKIN_IBUFG_OUT = CLKIN_IBUFG;
   assign CLK0_OUT = CLKFB_IN;
   BUFG  CLKFX_BUFG_INST (.I(CLKFX_BUF), 
                         .O(CLKFX_OUT));
   IBUFG  CLKIN_IBUFG_INST (.I(CLKIN_IN), 
                           .O(CLKIN_IBUFG));
   BUFG  CLK0_BUFG_INST (.I(CLK0_BUF), 
                        .O(CLKFB_IN));
   DCM #( .CLK_FEEDBACK("1X"), .CLKDV_DIVIDE(2.0), .CLKFX_DIVIDE(8), 
         .CLKFX_MULTIPLY(18), .CLKIN_DIVIDE_BY_2("FALSE"), 
         .CLKIN_PERIOD(20.000), .CLKOUT_PHASE_SHIFT("NONE"), 
         .DESKEW_ADJUST("SYSTEM_SYNCHRONOUS"), .DFS_FREQUENCY_MODE("LOW"), 
         .DLL_FREQUENCY_MODE("LOW"), .DUTY_CYCLE_CORRECTION("TRUE"), 
         .FACTORY_JF(16'h8080), .PHASE_SHIFT(0), .STARTUP_WAIT("FALSE") ) 
         DCM_INST (.CLKFB(CLKFB_IN), 
                 .CLKIN(CLKIN_IBUFG), 
                 .DSSEN(GND_BIT), 
                 .PSCLK(GND_BIT), 
                 .PSEN(GND_BIT), 
                 .PSINCDEC(GND_BIT), 
                 .RST(GND_BIT), 
                 .CLKDV(), 
                 .CLKFX(CLKFX_BUF), 
                 .CLKFX180(), 
                 .CLK0(CLK0_BUF), 
                 .CLK2X(), 
                 .CLK2X180(), 
                 .CLK90(), 
                 .CLK180(), 
                 .CLK270(), 
                 .LOCKED(), 
                 .PSDONE(), 
                 .STATUS());
endmodule