Rev |
Log message |
Author |
Age |
Path |
109 |
Added a data ram. |
rkastl |
5014d 10h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
104 |
SdController: Configuration ready to switch to high speed, refs #33 |
rkastl |
5014d 10h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
103 |
SdController: Checking speed works |
rkastl |
5014d 10h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
102 |
SdController: Enabling wide mode works, refs #33 |
rkastl |
5014d 10h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
101 |
Receiving response to ACMD51 works including data, refs #33. |
rkastl |
5014d 10h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
100 |
SdController: Receiving data after ACMD51, but CRC is wrong |
rkastl |
5014d 10h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
99 |
SdController: Checking bus width without receiving data response |
rkastl |
5014d 10h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
98 |
SdController: Receive response to CMD7 (except when busy is activated) |
rkastl |
5014d 10h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
95 |
SdController: entity and architecture split, all outputs registered
SdCardModel: Delay between response and next command added
SdData: Busy checking
refs #33 |
rkastl |
5014d 10h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
92 |
SdData: Sending in standard and wide mode (incl. simple not automated
testbench and synthesis), refs #31. |
rkastl |
5014d 10h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
89 |
Fixes #27, R3 uses '1111111' as CRC. |
rkastl |
5014d 10h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
88 |
Timeouts inserted, Sending Card status via Rs232 if changed |
rkastl |
5014d 10h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
83 |
SdCmd: Refactored |
rkastl |
5014d 10h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
75 |
Transfer to SbX, ref #17 |
rkastl |
5014d 11h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
63 |
SdController: basic init complete |
rkastl |
5014d 11h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
62 |
R2 implemented in complete stack, refs #15. |
rkastl |
5014d 11h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
60 |
Receiving a response to ACMD41 works (including busy, but voltage is not
checked), refs #15. |
rkastl |
5014d 11h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
57 |
SdController: Sending ACMD41, refs #15 |
rkastl |
5014d 11h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
56 |
SdCmd: Receiving generic response works |
rkastl |
5014d 11h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
54 |
SDController: Sending CMD0, and CMD8 after reset works. refs #15. |
rkastl |
5014d 11h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
49 |
SdCmd: Send renamed to Valid |
rkastl |
5014d 11h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
37 |
SdCmd: using records, added a bug somewhere. refs #16 |
rkastl |
5014d 11h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
34 |
Sd: SdCmd: Sending commands implemented, but not tested. refs #16. |
rkastl |
5014d 11h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |
29 |
Sd: package started |
rkastl |
5014d 11h |
/sdhc-sc-core/trunk/src/grpSd/pkgSd/ |