Rev |
Log message |
Author |
Age |
Path |
92 |
Fixes the problem whereby the master counters show when the user counters should
be showing and vice versa. Now the master counters show by default, together
with their correct labels. User counters are still available by pressing
'u' in the debugger, and the master counter display may be returned to by
pressing 'm' in the debugger. |
dgisselq |
3026d 18h |
/xulalx25soc/ |
91 |
Fixes bugs associated with an overflow of write acknowledgements in the
receiver. This helps keep our accesses aligned. |
dgisselq |
3026d 18h |
/xulalx25soc/ |
90 |
Reads and writes to the SD over SPI port now work. The card appears, as of now,
to be fully functional. |
dgisselq |
3026d 18h |
/xulalx25soc/ |
89 |
Bug fixes, following the adf_ce logic combining ALU/DIVIDE/FPU pipeline logic
into one register, this fixes that logic so that instructions without their
condition fulfilled are still "executed" and marked as done. |
dgisselq |
3026d 18h |
/xulalx25soc/ |
88 |
Adjusted copyright date. |
dgisselq |
3026d 18h |
/xulalx25soc/ |
87 |
Placed the interrupt into the carry chain for less logic area. |
dgisselq |
3026d 18h |
/xulalx25soc/ |
86 |
Fine tuning the `defines, so that you can build pipelined without pipelined
bus access and so forth. |
dgisselq |
3026d 18h |
/xulalx25soc/ |
85 |
First version of the SD-SPI interface, with partial functionality. (No the
empty link that was here before.) |
dgisselq |
3030d 15h |
/xulalx25soc/ |
84 |
First part of switching to proper sdspi.v, and not just the link. |
dgisselq |
3030d 15h |
/xulalx25soc/ |
83 |
Fixes a bug in the LX9 build whereby the flash was never ever granted permission
to use the SPI port. |
dgisselq |
3031d 19h |
/xulalx25soc/ |
82 |
|
dgisselq |
3032d 14h |
/xulalx25soc/ |
81 |
Adds register values for the SD-Card registers. |
dgisselq |
3032d 14h |
/xulalx25soc/ |
80 |
Currently working version: contains both a working DMA controller as well as
a working (as far as I can tell) SD-Card controller (writes not yet tested). |
dgisselq |
3032d 14h |
/xulalx25soc/ |
79 |
Adds 'bench' and 'sw' targets, and automatically builds them (now). |
dgisselq |
3032d 14h |
/xulalx25soc/ |
78 |
Comments out the line that caused a compiler warning--setting an unused
variable. Code should be better as a result. |
dgisselq |
3032d 14h |
/xulalx25soc/ |
77 |
Adds register names and values for the SD card interface. |
dgisselq |
3032d 14h |
/xulalx25soc/ |
76 |
Now tries to avoid reading from the stack if the stack addresses are already
known to be bad. That way, the debugger tries to preserve any bus error address
already on the buserr device. |
dgisselq |
3032d 14h |
/xulalx25soc/ |
75 |
Added simulation capability for the SD-Card, as well as debugging output for the
DMA. (The SD-Card debug may not be fully featured, yet, but it has gotten me
to where I can talk to the card.) |
dgisselq |
3032d 14h |
/xulalx25soc/ |
74 |
Adds the SD-card capability, and connects the debug wires to/from the uartdev
in case it needs to be debugged. |
dgisselq |
3032d 14h |
/xulalx25soc/ |
73 |
Simplified logic. |
dgisselq |
3032d 14h |
/xulalx25soc/ |
72 |
Sets XULA25 as the default. |
dgisselq |
3032d 14h |
/xulalx25soc/ |
71 |
Needed to play with subtle timing to get this to build. Expect me to play
with these two clock numbers more. |
dgisselq |
3032d 14h |
/xulalx25soc/ |
70 |
Cosmetic (minor) update. |
dgisselq |
3032d 14h |
/xulalx25soc/ |
69 |
Massive logic simplification. This is also the first (verified) working
version. |
dgisselq |
3032d 14h |
/xulalx25soc/ |
68 |
Fixes the debug ack line, so it no longer acks when there isn't a dbg_stb.
Fixed the multiply option parameter, so it sets a 3-clock multiply properly.
Adjusted the watchdog timer so that it now produces a timer that doesn't
reload--since this is pointless for a watchdog. Finally, connects a reset
line to the DMA, to make certain that resetting the CPU will also reset any
ongoing DMA operation. |
dgisselq |
3032d 15h |
/xulalx25soc/ |
67 |
Simplifies logic, and guarantees that the minimum set value will always
produce an int. For example, if the count was X before, setting X-1 wouldn't
produce an interrupt since it had passed. Now it produces an interrupt, and
keeps the next interrupt valid. |
dgisselq |
3032d 15h |
/xulalx25soc/ |
66 |
Simplified logic (barely). |
dgisselq |
3032d 15h |
/xulalx25soc/ |
65 |
Makes the auto-reload feature a parameterized (generic) feature, so the same
code will work for both auto-reloadable and non-autoreloadable (i.e. watchdog)
timers. |
dgisselq |
3032d 15h |
/xulalx25soc/ |
64 |
First (verified) working version. |
dgisselq |
3032d 15h |
/xulalx25soc/ |
63 |
Simplified logic. |
dgisselq |
3032d 15h |
/xulalx25soc/ |