Rev |
Log message |
Author |
Age |
Path |
9 |
Now working on the test bench for the FFT. Currently, the FFT passes
all test bench "tests." However, the test bench does not yet accurately
report on the success of its work. This remains for future work. Lots
of bugs fixed while making this test bench code work.
(I should mention, while all test benches currently pass, that doesn't
mean that the code works ... yet. I just haven't found the bug that
breaks it.) |
dgisselq |
3498d 23h |
/dblclockfft/trunk/bench/ |
8 |
This completes the initial work on a test bench for the FFT stage. I
chose to test the odd 2048 stage only, but (hopefully) the testbench
will still apply to all other stages as well. At any rate, based upon
some trial runs, it looks like the FFT may be starting to work as well.
More testing is needed, for certain, but to do that I'm going to have
to figure out just what tests are needed, and how exactly to apply those
tests within the test bench construct. |
dgisselq |
3499d 07h |
/dblclockfft/trunk/bench/ |
7 |
Two sources belonging to the last commit, whose comments go with the
last commit, that just didn't make it in time. |
dgisselq |
3499d 17h |
/dblclockfft/trunk/bench/ |
6 |
Lots of work accomplished today. Test benches now exist and work for the:
butterfly, multiply, bitreversal, pairwise FFT stage (dblstage), and the
four-wise FFT stage (qtrstage). Work continues on the single (generic)
FFT stage, and (of course) the FFT isn't ready yet. A second commit will
follow this one shortly with the new files added (oops!--I should've added
them this time--my bad.) |
dgisselq |
3499d 17h |
/dblclockfft/trunk/bench/ |
5 |
The butterfly_tb is now written, and the butterfly succeeds at the test
bench! |
dgisselq |
3500d 00h |
/dblclockfft/trunk/bench/ |
4 |
Bench tests updated, they now state SUCCESS upon successful completion,
return a 0 on success, and all bench tests test all function outputs
(now). |
dgisselq |
3500d 05h |
/dblclockfft/trunk/bench/ |
3 |
The first upload of the s/w didn't take. Had it taken, the comment would've
been: This is the first upload of the double clocked FFT software. While it
should (roughly) be complete, a lot of work remains to be done--primarily
in building test benches, modifying the interface of fftgen to make it
more friendly, etc. In fact, the c++ code not only compiles, but the
Verilog code it produces actually builds as well!
Now, however, I have several test benches written, and have verified the
unit functionality of the multiply, bit reversal stage, the dblstage (FFT
len 2), and the qtrstage (FFT len 4). I then took a closer look at the
multiply, discovered it failed at signed integers and rebuilt it. The
new test bench tests the full 16-bit signed integer support properly. This
leaves butterflies and generic FFT stages that still need test benches, as
does the main (I)FFT program. |
dgisselq |
3500d 06h |
/dblclockfft/trunk/bench/ |