URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] - Rev 198

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
198	Update UCF file to select Pmod pinout compatible with the PmodUSBUART. To use, make sure PmodUSBUART has JP1 as "LCL". Connect the usb to the uart and open the terminal program. Test the transmission via the LED on the Pmod. Then (carefully) plug into Pmod port on Zybo.	davidgb	1168d 04h	/
197	Updates from John Kent: -- 4.5 John Kent 2012-02-04 Re-arranged Rx & Tx Baud clock edge detect. -- 4.6 John Kent 3021-01-30 Double sample RxC, TxC, and RxD with cpu_clk -- for 125MHz Clock on Zybo Z7 board.	davidgb	1175d 01h	/
196	Working system boots to SBUG. Uses RS232 Pmod (no handshake) and 57600,8,N,1 (no handshake) hyperterm.	davidgb	1175d 02h	/
195	Switched to using the UART over usb for the console port.	davidgb	1175d 02h	/
194	Finally have a working board.	davidgb	1175d 02h	/
193	Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. Also fixed the 32k addressing	davidgb	1175d 06h	/
192	Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working.	davidgb	1175d 06h	/
191	check in file so that you do not need to generate it when running ISE in gui	davidgb	1176d 03h	/
190	check in file so that you do not need to generate it when running ISE in gui	davidgb	1176d 03h	/
189	Remove unused file. Created by ISE gui.	davidgb	1181d 21h	/
188	update options to match what the ISE gui does	davidgb	1181d 21h	/
187	Partially works. Garbage on the ACIA due to baud clock problems.	davidgb	1182d 02h	/
186	Somewhat functional boot to SBUG. ACIA freq is wrong but sometimes works if hyperterm set to 115kBps	davidgb	1182d 06h	/
185	Reverted back to the single-step version - something was broken	davidgb	1182d 07h	/
184	update files to correctly produce flex9ram.vhd	davidgb	1182d 07h	/
183	update file extensions	davidgb	1182d 07h	/
182	Add a copy of the derived ROM contents so that you can go directly to ISE GUI without having to 'make roms'	davidgb	1182d 07h	/
181	Add a copy of the derived ROM contents so that you can go directly to ISE GUI without having to 'make roms'	davidgb	1182d 07h	/
180	removed xdc file since ISE 14.7 does not support XDC	davidgb	1182d 08h	/
179	Zybo port done to the same point as the Atlys port. The hardware appears to work but the ACIA is not communicating properly.	davidgb	1182d 08h	/

1 2 Next >

Show All

Browse

Tools

Subversion Repositories System09

[/] - Rev 198

Filtering Options