OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] [System09/] [trunk/] - Rev 203

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
203 Added a parameterized ram model. davidgb 1154d 04h /System09/trunk/
202 Updated Zybo design to reintroduce VDU8 driving the PmodVGA on pmod connectors JC+JD.
This version also uses PmodUSBUART on JE. To use PmodRS232 you must edit the .ucf file and select the appropriate pin LOCs.		 davidgb 1154d 05h /System09/trunk/
201 A copy of XSA-3S1000.ucf and System09_Xess_XSA-3S1000.vhd that have dual serial ports with no handshake. davidgb 1160d 23h /System09/trunk/
200 Started adding back in video support - VDU8 instantiated and RGBHV bits sent to Pmod JE port. davidgb 1167d 21h /System09/trunk/
199 Add in full RS-232 handshake for PmodUSBUART. davidgb 1168d 22h /System09/trunk/
198 Update UCF file to select Pmod pinout compatible with the PmodUSBUART.
To use, make sure PmodUSBUART has JP1 as "LCL". Connect the usb to the uart and open the terminal program. Test the transmission via the LED on the Pmod. Then (carefully) plug into Pmod port on Zybo.		 davidgb 1168d 23h /System09/trunk/
197 Updates from John Kent:
-- 4.5 John Kent 2012-02-04 Re-arranged Rx & Tx Baud clock edge detect.
-- 4.6 John Kent 3021-01-30 Double sample RxC, TxC, and RxD with cpu_clk
-- for 125MHz Clock on Zybo Z7 board.		 davidgb 1175d 20h /System09/trunk/
196 Working system boots to SBUG. Uses RS232 Pmod (no handshake) and 57600,8,N,1 (no handshake) hyperterm. davidgb 1175d 21h /System09/trunk/
195 Switched to using the UART over usb for the console port. davidgb 1175d 21h /System09/trunk/
194 Finally have a working board. davidgb 1175d 21h /System09/trunk/
193 Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. Also fixed the 32k addressing davidgb 1176d 01h /System09/trunk/
192 Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. davidgb 1176d 01h /System09/trunk/
191 check in file so that you do not need to generate it when running ISE in gui davidgb 1176d 22h /System09/trunk/
190 check in file so that you do not need to generate it when running ISE in gui davidgb 1176d 22h /System09/trunk/
189 Remove unused file. Created by ISE gui. davidgb 1182d 16h /System09/trunk/
188 update options to match what the ISE gui does davidgb 1182d 16h /System09/trunk/
187 Partially works. Garbage on the ACIA due to baud clock problems. davidgb 1182d 21h /System09/trunk/
186 Somewhat functional boot to SBUG. ACIA freq is wrong but sometimes works if hyperterm set to 115kBps davidgb 1183d 01h /System09/trunk/
185 Reverted back to the single-step version - something was broken davidgb 1183d 02h /System09/trunk/
184 update files to correctly produce flex9ram.vhd davidgb 1183d 02h /System09/trunk/
183 update file extensions davidgb 1183d 02h /System09/trunk/
182 Add a copy of the derived ROM contents so that you can go directly to ISE GUI without having to 'make roms' davidgb 1183d 02h /System09/trunk/
181 Add a copy of the derived ROM contents so that you can go directly to ISE GUI without having to 'make roms' davidgb 1183d 02h /System09/trunk/
180 removed xdc file since ISE 14.7 does not support XDC davidgb 1183d 03h /System09/trunk/
179 Zybo port done to the same point as the Atlys port. The hardware appears to work but the ACIA is not communicating properly. davidgb 1183d 03h /System09/trunk/
178 work on constraints file davidgb 1183d 14h /System09/trunk/
177 work on zybo port davidgb 1183d 15h /System09/trunk/
176 Don't delete system09_impact.cmd on 'clean' davidgb 1183d 16h /System09/trunk/
175 Corrected RS-232 pin connections. Cleaned up code. Removed debug code.
System boots but the baud clock must be wrong - get garbage on hyperterm.		 davidgb 1183d 16h /System09/trunk/
174 Added button debounce. Single-step button. multiplex LED to show nibbles of addr and data for debug. Confirmed that CPU is reading from sys09swt.vhd SBug ROM correctly. Still need to debug ACIA output. davidgb 1183d 20h /System09/trunk/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.