OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] [System09/] [trunk/] - Rev 205

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
205 A new version of VDU8 that uses the parameterized xilinx ram "block_spram" for the video memory. davidgb 1153d 19h /System09/trunk
204 patched up ram for zybo use davidgb 1153d 19h /System09/trunk
203 Added a parameterized ram model. davidgb 1153d 19h /System09/trunk
202 Updated Zybo design to reintroduce VDU8 driving the PmodVGA on pmod connectors JC+JD.
This version also uses PmodUSBUART on JE. To use PmodRS232 you must edit the .ucf file and select the appropriate pin LOCs.		 davidgb 1153d 20h /System09/trunk
201 A copy of XSA-3S1000.ucf and System09_Xess_XSA-3S1000.vhd that have dual serial ports with no handshake. davidgb 1160d 14h /System09/trunk
200 Started adding back in video support - VDU8 instantiated and RGBHV bits sent to Pmod JE port. davidgb 1167d 12h /System09/trunk
199 Add in full RS-232 handshake for PmodUSBUART. davidgb 1168d 13h /System09/trunk
198 Update UCF file to select Pmod pinout compatible with the PmodUSBUART.
To use, make sure PmodUSBUART has JP1 as "LCL". Connect the usb to the uart and open the terminal program. Test the transmission via the LED on the Pmod. Then (carefully) plug into Pmod port on Zybo.		 davidgb 1168d 15h /System09/trunk
197 Updates from John Kent:
-- 4.5 John Kent 2012-02-04 Re-arranged Rx & Tx Baud clock edge detect.
-- 4.6 John Kent 3021-01-30 Double sample RxC, TxC, and RxD with cpu_clk
-- for 125MHz Clock on Zybo Z7 board.		 davidgb 1175d 12h /System09/trunk
196 Working system boots to SBUG. Uses RS232 Pmod (no handshake) and 57600,8,N,1 (no handshake) hyperterm. davidgb 1175d 12h /System09/trunk
195 Switched to using the UART over usb for the console port. davidgb 1175d 13h /System09/trunk
194 Finally have a working board. davidgb 1175d 13h /System09/trunk
193 Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. Also fixed the 32k addressing davidgb 1175d 16h /System09/trunk
192 Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. davidgb 1175d 16h /System09/trunk
191 check in file so that you do not need to generate it when running ISE in gui davidgb 1176d 13h /System09/trunk
190 check in file so that you do not need to generate it when running ISE in gui davidgb 1176d 13h /System09/trunk
189 Remove unused file. Created by ISE gui. davidgb 1182d 07h /System09/trunk
188 update options to match what the ISE gui does davidgb 1182d 08h /System09/trunk
187 Partially works. Garbage on the ACIA due to baud clock problems. davidgb 1182d 13h /System09/trunk
186 Somewhat functional boot to SBUG. ACIA freq is wrong but sometimes works if hyperterm set to 115kBps davidgb 1182d 16h /System09/trunk
185 Reverted back to the single-step version - something was broken davidgb 1182d 17h /System09/trunk
184 update files to correctly produce flex9ram.vhd davidgb 1182d 17h /System09/trunk
183 update file extensions davidgb 1182d 17h /System09/trunk
182 Add a copy of the derived ROM contents so that you can go directly to ISE GUI without having to 'make roms' davidgb 1182d 17h /System09/trunk
181 Add a copy of the derived ROM contents so that you can go directly to ISE GUI without having to 'make roms' davidgb 1182d 17h /System09/trunk
180 removed xdc file since ISE 14.7 does not support XDC davidgb 1182d 18h /System09/trunk
179 Zybo port done to the same point as the Atlys port. The hardware appears to work but the ACIA is not communicating properly. davidgb 1182d 18h /System09/trunk
178 work on constraints file davidgb 1183d 06h /System09/trunk
177 work on zybo port davidgb 1183d 06h /System09/trunk
176 Don't delete system09_impact.cmd on 'clean' davidgb 1183d 07h /System09/trunk

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.