OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] [System09/] [trunk/] - Rev 213

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
213 updated project file davidgb 456d 06h /System09/trunk/
212 Switched from VGA output to HDMI output. davidgb 456d 06h /System09/trunk/
211 New version of VDU8 that has HDMI output. Still needs work refactoring clock signals. davidgb 456d 06h /System09/trunk/
210 Check in code fragment implementing HDMI/TMDS encoding.
Derived from HDMI_test.v https://www.fpga4fun.com/HDMI.html (c) fpga4fun.com & KNJN LLC 2013
davidgb 456d 06h /System09/trunk/
209 Started adding in keyboard (not tested).
Added in green-only VGA output thru Pmod port to PmodVGA J2 port.
Started working on HDMI output
davidgb 456d 08h /System09/trunk/
208 swapped 32k and 16k ram to use block_spram. davidgb 500d 09h /System09/trunk/
207 Updated design to pick up vdu8_spram (which uses parameterized ram for video memory instead of hard macros) davidgb 500d 10h /System09/trunk/
206 Update comment/cleanup davidgb 500d 10h /System09/trunk/
205 A new version of VDU8 that uses the parameterized xilinx ram "block_spram" for the video memory. davidgb 500d 10h /System09/trunk/
204 patched up ram for zybo use davidgb 500d 10h /System09/trunk/
203 Added a parameterized ram model. davidgb 500d 10h /System09/trunk/
202 Updated Zybo design to reintroduce VDU8 driving the PmodVGA on pmod connectors JC+JD.
This version also uses PmodUSBUART on JE. To use PmodRS232 you must edit the .ucf file and select the appropriate pin LOCs.
davidgb 500d 11h /System09/trunk/
201 A copy of XSA-3S1000.ucf and System09_Xess_XSA-3S1000.vhd that have dual serial ports with no handshake. davidgb 507d 05h /System09/trunk/
200 Started adding back in video support - VDU8 instantiated and RGBHV bits sent to Pmod JE port. davidgb 514d 03h /System09/trunk/
199 Add in full RS-232 handshake for PmodUSBUART. davidgb 515d 04h /System09/trunk/
198 Update UCF file to select Pmod pinout compatible with the PmodUSBUART.
To use, make sure PmodUSBUART has JP1 as "LCL". Connect the usb to the uart and open the terminal program. Test the transmission via the LED on the Pmod. Then (carefully) plug into Pmod port on Zybo.
davidgb 515d 06h /System09/trunk/
197 Updates from John Kent:
-- 4.5 John Kent 2012-02-04 Re-arranged Rx & Tx Baud clock edge detect.
-- 4.6 John Kent 3021-01-30 Double sample RxC, TxC, and RxD with cpu_clk
-- for 125MHz Clock on Zybo Z7 board.
davidgb 522d 03h /System09/trunk/
196 Working system boots to SBUG. Uses RS232 Pmod (no handshake) and 57600,8,N,1 (no handshake) hyperterm. davidgb 522d 03h /System09/trunk/
195 Switched to using the UART over usb for the console port. davidgb 522d 03h /System09/trunk/
194 Finally have a working board. davidgb 522d 04h /System09/trunk/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2022 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.