URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] - Rev 121

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
121	gsr added for use when ETH_XILINX_RAMB4 define is set.	mohor	7941d 04h	/
120	Unused files removed.	mohor	7941d 05h	/
119	Ram , used for BDs changed from generic_spram to eth_spram_256x32.	mohor	7941d 05h	/
118	ShiftEnded synchronization changed.	mohor	7944d 20h	/
117	Clock mrx_clk set to 2.5 MHz.	mohor	7945d 07h	/
116	Testing environment also includes traffic cop, memory interface and host interface.	mohor	7945d 07h	/
115	RxBDAddress takes `ETH_TX_BD_NUM_DEF value after reset.	mohor	7946d 04h	/
114	EXTERNAL_DMA removed. External DMA not supported.	mohor	7947d 02h	/
113	RxPointer bug fixed.	mohor	7953d 18h	/
112	Previous bug wasn't succesfully removed. Now fixed.	mohor	7954d 07h	/
111	Master state machine had a bug when switching from master write to master read.	mohor	7954d 21h	/
110	m_wb_cyc_o signal released after every single transfer.	mohor	7955d 00h	/
109	Comment removed.	mohor	7955d 00h	/
108	Testbench supports unaligned accesses.	mohor	8022d 10h	/
107	TX_BUF_BASE changed.	mohor	8022d 10h	/
106	Outputs registered. Reset changed for eth_wishbone module.	mohor	8022d 10h	/
105	Compiler directives added. Tx and Rx fifo size incremented. A "late collision" bug fixed.	mohor	8031d 12h	/
104	FCS should not be included in NibbleMinFl.	mohor	8033d 06h	/
103	Wishbone signals are registered when ETH_REGISTERED_OUTPUTS is selected in eth_defines.v	mohor	8033d 06h	/
102	Interrupts are visible in the ETH_INT_SOURCE regardless if they are enabled or not.	mohor	8033d 06h	/
101	Short frame and ReceivedLengthOK were not detected correctly.	mohor	8033d 07h	/
100	Generic ram or Xilinx ram can be used in fifo (selectable by setting ETH_FIFO_XILINX in eth_defines.v).	mohor	8033d 07h	/
99	Document revised.	mohor	8040d 05h	/
98	Document revised.	mohor	8040d 06h	/
97	Small typo fixed.	lampret	8057d 04h	/
96	Any address can be used for Tx and Rx BD pointers. Address does not need to be aligned.	mohor	8061d 04h	/
95	md_padoen_o changed to md_padoe_o. Signal was always active high, just name was incorrect.	mohor	8061d 07h	/
94	When clear and read/write are active at the same time, cnt and pointers are set to 1.	mohor	8061d 07h	/
93	When in promiscous mode some frames were not received correctly. Fixed.	mohor	8066d 05h	/
92	Some defines that are used in testbench only were moved to tb_eth_defines.v file.	mohor	8067d 08h	/

Browse

Tools

Subversion Repositories ethmac

[/] - Rev 121

Filtering Options