OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] - Rev 274

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
274 Backup version. Not fully working. tadejm 6405d 12h /
273 This commit was manufactured by cvs2svn to create tag 'rel_15'. 6405d 18h /
272 When control packets were received, they were ignored in some cases. tadejm 6405d 18h /
271 This commit was manufactured by cvs2svn to create tag 'rel_14'. 6406d 19h /
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.
mohor 6406d 19h /
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 6407d 19h /
268 Release 1.19. Control frame description changed. mohor 6461d 13h /
267 Full duplex control frames tested. mohor 6461d 15h /
266 Flow control test almost finished. mohor 6466d 14h /
265 This commit was manufactured by cvs2svn to create tag 'rel_13'. 6466d 18h /
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.
mohor 6466d 18h /
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.
mohor 6467d 05h /
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.
mohor 6467d 05h /
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.
mohor 6467d 06h /
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.
mohor 6467d 18h /
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).
mohor 6468d 07h /
258 This commit was manufactured by cvs2svn to create tag 'rel_12'. 6468d 07h /
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.
mohor 6468d 07h /
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.
mohor 6468d 07h /
255 TPauseRq synchronized to tx_clk. mohor 6468d 07h /

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2020 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.