OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] - Rev 276

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
276 Defer indication changed. tadejm 7727d 19h /
275 Fix MTxErr or prevent sending too big frames. mohor 7734d 23h /
274 Backup version. Not fully working. tadejm 7735d 13h /
273 This commit was manufactured by cvs2svn to create tag 'rel_15'. 7735d 18h /
272 When control packets were received, they were ignored in some cases. tadejm 7735d 18h /
271 This commit was manufactured by cvs2svn to create tag 'rel_14'. 7736d 20h /
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.
mohor 7736d 20h /
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 7737d 20h /
268 Release 1.19. Control frame description changed. mohor 7791d 13h /
267 Full duplex control frames tested. mohor 7791d 16h /
266 Flow control test almost finished. mohor 7796d 15h /
265 This commit was manufactured by cvs2svn to create tag 'rel_13'. 7796d 19h /
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.
mohor 7796d 19h /
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.
mohor 7797d 06h /
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.
mohor 7797d 06h /
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.
mohor 7797d 06h /
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.
mohor 7797d 18h /
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).
mohor 7798d 08h /
258 This commit was manufactured by cvs2svn to create tag 'rel_12'. 7798d 08h /
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.
mohor 7798d 08h /
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.
mohor 7798d 08h /
255 TPauseRq synchronized to tx_clk. mohor 7798d 08h /
254 Temp version. mohor 7799d 12h /
253 r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. mohor 7799d 14h /
252 Just some updates. tadejm 7799d 15h /
251 When control frame (PAUSE) was sent, status was written in the
eth_wishbone module and both TXB and TXC interrupts were set. Fixed.
Only TXC interrupt is set.
mohor 7799d 15h /
250 AddressMiss status is connecting to the Rx BD. AddressMiss is identifying
that a frame was received because of the promiscous mode.
mohor 7799d 15h /
249 This commit was manufactured by cvs2svn to create tag 'rel_11'. 7800d 15h /
248 wb_rst_i is used for MIIM reset. mohor 7800d 15h /
247 This commit was manufactured by cvs2svn to create tag 'rel_10'. 7803d 18h /

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.