OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] - Rev 278

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
278 A new bug (entered with previous update) fixed. When abort occured sometimes
data transmission was blocked.
mohor 6406d 18h /
277 When padding was enabled and crc disabled, frame was not ended correctly. mohor 6406d 18h /
276 Defer indication changed. tadejm 6406d 18h /
275 Fix MTxErr or prevent sending too big frames. mohor 6413d 22h /
274 Backup version. Not fully working. tadejm 6414d 12h /
273 This commit was manufactured by cvs2svn to create tag 'rel_15'. 6414d 18h /
272 When control packets were received, they were ignored in some cases. tadejm 6414d 18h /
271 This commit was manufactured by cvs2svn to create tag 'rel_14'. 6415d 19h /
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.
mohor 6415d 19h /
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 6416d 19h /
268 Release 1.19. Control frame description changed. mohor 6470d 13h /
267 Full duplex control frames tested. mohor 6470d 15h /
266 Flow control test almost finished. mohor 6475d 14h /
265 This commit was manufactured by cvs2svn to create tag 'rel_13'. 6475d 18h /
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.
mohor 6475d 18h /
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.
mohor 6476d 05h /
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.
mohor 6476d 05h /
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.
mohor 6476d 05h /
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.
mohor 6476d 17h /
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).
mohor 6477d 07h /
258 This commit was manufactured by cvs2svn to create tag 'rel_12'. 6477d 07h /
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.
mohor 6477d 07h /
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.
mohor 6477d 07h /
255 TPauseRq synchronized to tx_clk. mohor 6477d 07h /
254 Temp version. mohor 6478d 11h /
253 r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. mohor 6478d 13h /
252 Just some updates. tadejm 6478d 14h /
251 When control frame (PAUSE) was sent, status was written in the
eth_wishbone module and both TXB and TXC interrupts were set. Fixed.
Only TXC interrupt is set.
mohor 6478d 14h /
250 AddressMiss status is connecting to the Rx BD. AddressMiss is identifying
that a frame was received because of the promiscous mode.
mohor 6478d 14h /
249 This commit was manufactured by cvs2svn to create tag 'rel_11'. 6479d 14h /

powered by: WebSVN 2.1.0

© copyright 1999-2020 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.