OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] - Rev 285

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
285 Binary operator used instead of unary (xnor). mohor 7621d 00h /
284 Busy was set 2 cycles too late. Reported by Dennis Scott. mohor 7649d 02h /
283 RxBDAddress was updated also when value to r_TxBDNum was written with
greater value than allowed.		 mohor 7676d 19h /
282 This commit was manufactured by cvs2svn to create tag 'rel_16'. 7753d 20h /
281 Tests test_mac_full_duplex_receive 4-7 fixed to proper BD. mohor 7753d 20h /
280 Reset has priority in some flipflops. mohor 7754d 21h /
279 Underrun test fixed. Many other tests fixed. mohor 7754d 22h /
278 A new bug (entered with previous update) fixed. When abort occured sometimes
data transmission was blocked.		 mohor 7754d 22h /
277 When padding was enabled and crc disabled, frame was not ended correctly. mohor 7754d 22h /
276 Defer indication changed. tadejm 7754d 22h /
275 Fix MTxErr or prevent sending too big frames. mohor 7762d 03h /
274 Backup version. Not fully working. tadejm 7762d 16h /
273 This commit was manufactured by cvs2svn to create tag 'rel_15'. 7762d 22h /
272 When control packets were received, they were ignored in some cases. tadejm 7762d 22h /
271 This commit was manufactured by cvs2svn to create tag 'rel_14'. 7764d 00h /
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.		 mohor 7764d 00h /
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 7765d 00h /
268 Release 1.19. Control frame description changed. mohor 7818d 17h /
267 Full duplex control frames tested. mohor 7818d 19h /
266 Flow control test almost finished. mohor 7823d 18h /
265 This commit was manufactured by cvs2svn to create tag 'rel_13'. 7823d 22h /
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.		 mohor 7823d 22h /
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.		 mohor 7824d 10h /
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.		 mohor 7824d 10h /
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.		 mohor 7824d 10h /
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.		 mohor 7824d 22h /
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).		 mohor 7825d 11h /
258 This commit was manufactured by cvs2svn to create tag 'rel_12'. 7825d 12h /
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.		 mohor 7825d 12h /
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.		 mohor 7825d 12h /

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.