Subversion Repositories ethmac

[/] [ethmac/] [tags/] [asyst_2/] [rtl/] - Rev 276


Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
276 Defer indication changed. tadejm 7130d 20h /ethmac/tags/asyst_2/rtl/
275 Fix MTxErr or prevent sending too big frames. mohor 7138d 01h /ethmac/tags/asyst_2/rtl/
272 When control packets were received, they were ignored in some cases. tadejm 7138d 20h /ethmac/tags/asyst_2/rtl/
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.
mohor 7139d 22h /ethmac/tags/asyst_2/rtl/
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 7140d 22h /ethmac/tags/asyst_2/rtl/
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.
mohor 7199d 21h /ethmac/tags/asyst_2/rtl/
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
mohor 7200d 08h /ethmac/tags/asyst_2/rtl/
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).
mohor 7201d 09h /ethmac/tags/asyst_2/rtl/
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.
mohor 7201d 10h /ethmac/tags/asyst_2/rtl/
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.
mohor 7201d 10h /ethmac/tags/asyst_2/rtl/
255 TPauseRq synchronized to tx_clk. mohor 7201d 10h /ethmac/tags/asyst_2/rtl/
253 r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. mohor 7202d 16h /ethmac/tags/asyst_2/rtl/
251 When control frame (PAUSE) was sent, status was written in the
eth_wishbone module and both TXB and TXC interrupts were set. Fixed.
Only TXC interrupt is set.
mohor 7202d 16h /ethmac/tags/asyst_2/rtl/
250 AddressMiss status is connecting to the Rx BD. AddressMiss is identifying
that a frame was received because of the promiscous mode.
mohor 7202d 16h /ethmac/tags/asyst_2/rtl/
248 wb_rst_i is used for MIIM reset. mohor 7203d 16h /ethmac/tags/asyst_2/rtl/
246 Since r_Rst bit is not used any more, default value is changed to 0xa000. mohor 7206d 19h /ethmac/tags/asyst_2/rtl/
244 r_Rst signal does not reset any module any more and is removed from the design. mohor 7207d 15h /ethmac/tags/asyst_2/rtl/
242 Late collision is reported only when not in the full duplex.
Sample is taken (for status) as soon as MRxDV is not valid (regardless
of the received byte cnt).
tadejm 7208d 11h /ethmac/tags/asyst_2/rtl/
241 StartIdle state changed (not important the size of the packet).
StartData1 activates only while ByteCnt is smaller than the MaxFrame.
tadejm 7208d 11h /ethmac/tags/asyst_2/rtl/
240 All modules are reset with wb_rst instead of the r_Rst. Exception is MII module. tadejm 7208d 12h /ethmac/tags/asyst_2/rtl/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2022, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.