OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [tags/] [rel_15] - Rev 269

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 6114d 04h /ethmac/tags/rel_15
268 Release 1.19. Control frame description changed. mohor 6167d 21h /ethmac/tags/rel_15
267 Full duplex control frames tested. mohor 6167d 23h /ethmac/tags/rel_15
266 Flow control test almost finished. mohor 6172d 22h /ethmac/tags/rel_15
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.
mohor 6173d 02h /ethmac/tags/rel_15
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.
mohor 6173d 13h /ethmac/tags/rel_15
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.
mohor 6173d 14h /ethmac/tags/rel_15
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.
mohor 6173d 14h /ethmac/tags/rel_15
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.
mohor 6174d 02h /ethmac/tags/rel_15
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).
mohor 6174d 15h /ethmac/tags/rel_15
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.
mohor 6174d 15h /ethmac/tags/rel_15
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.
mohor 6174d 15h /ethmac/tags/rel_15
255 TPauseRq synchronized to tx_clk. mohor 6174d 15h /ethmac/tags/rel_15
254 Temp version. mohor 6175d 19h /ethmac/tags/rel_15
253 r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. mohor 6175d 21h /ethmac/tags/rel_15
252 Just some updates. tadejm 6175d 22h /ethmac/tags/rel_15
251 When control frame (PAUSE) was sent, status was written in the
eth_wishbone module and both TXB and TXC interrupts were set. Fixed.
Only TXC interrupt is set.
mohor 6175d 22h /ethmac/tags/rel_15
250 AddressMiss status is connecting to the Rx BD. AddressMiss is identifying
that a frame was received because of the promiscous mode.
mohor 6175d 22h /ethmac/tags/rel_15
248 wb_rst_i is used for MIIM reset. mohor 6176d 22h /ethmac/tags/rel_15
246 Since r_Rst bit is not used any more, default value is changed to 0xa000. mohor 6180d 01h /ethmac/tags/rel_15

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2019 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.