OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [tags/] [rel_18/] - Rev 285

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
285 Binary operator used instead of unary (xnor). mohor 6004d 20h /ethmac/tags/rel_18/
284 Busy was set 2 cycles too late. Reported by Dennis Scott. mohor 6032d 22h /ethmac/tags/rel_18/
283 RxBDAddress was updated also when value to r_TxBDNum was written with
greater value than allowed.
mohor 6060d 15h /ethmac/tags/rel_18/
281 Tests test_mac_full_duplex_receive 4-7 fixed to proper BD. mohor 6137d 16h /ethmac/tags/rel_18/
280 Reset has priority in some flipflops. mohor 6138d 17h /ethmac/tags/rel_18/
279 Underrun test fixed. Many other tests fixed. mohor 6138d 18h /ethmac/tags/rel_18/
278 A new bug (entered with previous update) fixed. When abort occured sometimes
data transmission was blocked.
mohor 6138d 18h /ethmac/tags/rel_18/
277 When padding was enabled and crc disabled, frame was not ended correctly. mohor 6138d 18h /ethmac/tags/rel_18/
276 Defer indication changed. tadejm 6138d 18h /ethmac/tags/rel_18/
275 Fix MTxErr or prevent sending too big frames. mohor 6145d 23h /ethmac/tags/rel_18/
274 Backup version. Not fully working. tadejm 6146d 12h /ethmac/tags/rel_18/
272 When control packets were received, they were ignored in some cases. tadejm 6146d 18h /ethmac/tags/rel_18/
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.
mohor 6147d 20h /ethmac/tags/rel_18/
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 6148d 20h /ethmac/tags/rel_18/
268 Release 1.19. Control frame description changed. mohor 6202d 13h /ethmac/tags/rel_18/
267 Full duplex control frames tested. mohor 6202d 16h /ethmac/tags/rel_18/
266 Flow control test almost finished. mohor 6207d 14h /ethmac/tags/rel_18/
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.
mohor 6207d 18h /ethmac/tags/rel_18/
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.
mohor 6208d 06h /ethmac/tags/rel_18/
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.
mohor 6208d 06h /ethmac/tags/rel_18/
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.
mohor 6208d 06h /ethmac/tags/rel_18/
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.
mohor 6208d 18h /ethmac/tags/rel_18/
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).
mohor 6209d 07h /ethmac/tags/rel_18/
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.
mohor 6209d 08h /ethmac/tags/rel_18/
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.
mohor 6209d 08h /ethmac/tags/rel_18/
255 TPauseRq synchronized to tx_clk. mohor 6209d 08h /ethmac/tags/rel_18/
254 Temp version. mohor 6210d 11h /ethmac/tags/rel_18/
253 r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. mohor 6210d 14h /ethmac/tags/rel_18/
252 Just some updates. tadejm 6210d 14h /ethmac/tags/rel_18/
251 When control frame (PAUSE) was sent, status was written in the
eth_wishbone module and both TXB and TXC interrupts were set. Fixed.
Only TXC interrupt is set.
mohor 6210d 14h /ethmac/tags/rel_18/

powered by: WebSVN 2.1.0

© copyright 1999-2019 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.