OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [tags/] [rel_19/] - Rev 276

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
276 Defer indication changed. tadejm 7754d 10h /ethmac/tags/rel_19
275 Fix MTxErr or prevent sending too big frames. mohor 7761d 14h /ethmac/tags/rel_19
274 Backup version. Not fully working. tadejm 7762d 04h /ethmac/tags/rel_19
272 When control packets were received, they were ignored in some cases. tadejm 7762d 09h /ethmac/tags/rel_19
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.		 mohor 7763d 11h /ethmac/tags/rel_19
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 7764d 11h /ethmac/tags/rel_19
268 Release 1.19. Control frame description changed. mohor 7818d 04h /ethmac/tags/rel_19
267 Full duplex control frames tested. mohor 7818d 07h /ethmac/tags/rel_19
266 Flow control test almost finished. mohor 7823d 06h /ethmac/tags/rel_19
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.		 mohor 7823d 10h /ethmac/tags/rel_19
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.		 mohor 7823d 21h /ethmac/tags/rel_19
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.		 mohor 7823d 21h /ethmac/tags/rel_19
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.		 mohor 7823d 21h /ethmac/tags/rel_19
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.		 mohor 7824d 09h /ethmac/tags/rel_19
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).		 mohor 7824d 23h /ethmac/tags/rel_19
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.		 mohor 7824d 23h /ethmac/tags/rel_19
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.		 mohor 7824d 23h /ethmac/tags/rel_19
255 TPauseRq synchronized to tx_clk. mohor 7824d 23h /ethmac/tags/rel_19
254 Temp version. mohor 7826d 03h /ethmac/tags/rel_19
253 r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. mohor 7826d 05h /ethmac/tags/rel_19

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.