OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [tags/] [rel_20/] - Rev 285

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
285 Binary operator used instead of unary (xnor). mohor 7894d 04h /ethmac/tags/rel_20/
284 Busy was set 2 cycles too late. Reported by Dennis Scott. mohor 7922d 05h /ethmac/tags/rel_20/
283 RxBDAddress was updated also when value to r_TxBDNum was written with
greater value than allowed.
mohor 7949d 23h /ethmac/tags/rel_20/
281 Tests test_mac_full_duplex_receive 4-7 fixed to proper BD. mohor 8026d 23h /ethmac/tags/rel_20/
280 Reset has priority in some flipflops. mohor 8028d 01h /ethmac/tags/rel_20/
279 Underrun test fixed. Many other tests fixed. mohor 8028d 02h /ethmac/tags/rel_20/
278 A new bug (entered with previous update) fixed. When abort occured sometimes
data transmission was blocked.
mohor 8028d 02h /ethmac/tags/rel_20/
277 When padding was enabled and crc disabled, frame was not ended correctly. mohor 8028d 02h /ethmac/tags/rel_20/
276 Defer indication changed. tadejm 8028d 02h /ethmac/tags/rel_20/
275 Fix MTxErr or prevent sending too big frames. mohor 8035d 06h /ethmac/tags/rel_20/
274 Backup version. Not fully working. tadejm 8035d 20h /ethmac/tags/rel_20/
272 When control packets were received, they were ignored in some cases. tadejm 8036d 02h /ethmac/tags/rel_20/
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.
mohor 8037d 03h /ethmac/tags/rel_20/
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 8038d 03h /ethmac/tags/rel_20/
268 Release 1.19. Control frame description changed. mohor 8091d 21h /ethmac/tags/rel_20/
267 Full duplex control frames tested. mohor 8091d 23h /ethmac/tags/rel_20/
266 Flow control test almost finished. mohor 8096d 22h /ethmac/tags/rel_20/
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.
mohor 8097d 02h /ethmac/tags/rel_20/
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.
mohor 8097d 13h /ethmac/tags/rel_20/
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.
mohor 8097d 13h /ethmac/tags/rel_20/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.