OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [tags/] [rel_26/] [rtl/] - Rev 312

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.
mohor 7256d 08h /ethmac/tags/rel_26/rtl/
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).
mohor 7257d 09h /ethmac/tags/rel_26/rtl/
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.
mohor 7257d 09h /ethmac/tags/rel_26/rtl/
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.
mohor 7257d 09h /ethmac/tags/rel_26/rtl/
255 TPauseRq synchronized to tx_clk. mohor 7257d 10h /ethmac/tags/rel_26/rtl/
253 r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. mohor 7258d 15h /ethmac/tags/rel_26/rtl/
251 When control frame (PAUSE) was sent, status was written in the
eth_wishbone module and both TXB and TXC interrupts were set. Fixed.
Only TXC interrupt is set.
mohor 7258d 16h /ethmac/tags/rel_26/rtl/
250 AddressMiss status is connecting to the Rx BD. AddressMiss is identifying
that a frame was received because of the promiscous mode.
mohor 7258d 16h /ethmac/tags/rel_26/rtl/
248 wb_rst_i is used for MIIM reset. mohor 7259d 16h /ethmac/tags/rel_26/rtl/
246 Since r_Rst bit is not used any more, default value is changed to 0xa000. mohor 7262d 19h /ethmac/tags/rel_26/rtl/

< Prev 1 2

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2022 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.