OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [tags/] [rel_7/] [rtl/] [verilog/] - Rev 37

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
37 Link in the header changed. mohor 8099d 23h /ethmac/tags/rel_7/rtl/verilog/
34 RX_BD_NUM changed to TX_BD_NUM (holds number of TX descriptors
instead of the number of RX descriptors).
mohor 8148d 19h /ethmac/tags/rel_7/rtl/verilog/
33 ETH_RX_BD_ADR register deleted. ETH_RX_BD_NUM is used instead. mohor 8148d 23h /ethmac/tags/rel_7/rtl/verilog/
32 ETH_RX_BD_ADR register deleted. ETH_RX_BD_NUM is used instead. mohor 8149d 00h /ethmac/tags/rel_7/rtl/verilog/
29 Generic memory model is used. Defines are changed for the same reason. mohor 8170d 20h /ethmac/tags/rel_7/rtl/verilog/
24 Log file added. mohor 8195d 22h /ethmac/tags/rel_7/rtl/verilog/
23 Number of addresses (wb_adr_i) minimized. mohor 8195d 22h /ethmac/tags/rel_7/rtl/verilog/
22 eth_timescale.v changed to timescale.v This is done because of the
simulation of the few cores in a one joined project.
mohor 8196d 01h /ethmac/tags/rel_7/rtl/verilog/
21 Status signals changed, Adress decoding changed, interrupt controller
added.
mohor 8196d 22h /ethmac/tags/rel_7/rtl/verilog/
20 Defines changed (All precede with ETH_). Small changes because some
tools generate warnings when two operands are together. Synchronization
between two clocks domains in eth_wishbonedma.v is changed (due to ASIC
demands).
mohor 8220d 19h /ethmac/tags/rel_7/rtl/verilog/
18 Few little NCSIM warnings fixed. mohor 8233d 20h /ethmac/tags/rel_7/rtl/verilog/
17 Signal names changed on the top level for easier pad insertion (ASIC). mohor 8260d 20h /ethmac/tags/rel_7/rtl/verilog/
16 "else" was missing within the always block in file eth_wishbonedma.v. mohor 8268d 01h /ethmac/tags/rel_7/rtl/verilog/
15 A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
Include files fixed to contain no path.
File names and module names changed ta have a eth_ prologue in the name.
File eth_timescale.v is used to define timescale
All pin names on the top module are changed to contain _I, _O or _OE at the end.
Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
and Mdo_OE. The bidirectional signal must be created on the top level. This
is done due to the ASIC tools.
mohor 8269d 19h /ethmac/tags/rel_7/rtl/verilog/
14 Unconnected signals are now connected. mohor 8274d 00h /ethmac/tags/rel_7/rtl/verilog/
10 Directory structure changed. Files checked and joind together. mohor 8276d 13h /ethmac/tags/rel_7/rtl/verilog/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.