OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [trunk/] [rtl/] [verilog/] [eth_macstatus.v] - Rev 242

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
242 Late collision is reported only when not in the full duplex.
Sample is taken (for status) as soon as MRxDV is not valid (regardless
of the received byte cnt).		 tadejm 7827d 00h /ethmac/trunk/rtl/verilog/eth_macstatus.v
168 CarrierSenseLost bug fixed when operating in full duplex mode. mohor 7889d 08h /ethmac/trunk/rtl/verilog/eth_macstatus.v
146 CarrierSenseLost status is not set when working in loopback mode. mohor 7897d 04h /ethmac/trunk/rtl/verilog/eth_macstatus.v
126 InvalidSymbol generation changed. mohor 7938d 04h /ethmac/trunk/rtl/verilog/eth_macstatus.v
101 Short frame and ReceivedLengthOK were not detected correctly. mohor 8032d 09h /ethmac/trunk/rtl/verilog/eth_macstatus.v
70 Small fixes. mohor 8095d 12h /ethmac/trunk/rtl/verilog/eth_macstatus.v
64 Status was not written correctly when frames were discarted because of
address mismatch.		 mohor 8098d 05h /ethmac/trunk/rtl/verilog/eth_macstatus.v
43 Tx status is written back to the BD. mohor 8102d 13h /ethmac/trunk/rtl/verilog/eth_macstatus.v
42 Rx status is written back to the BD. mohor 8105d 06h /ethmac/trunk/rtl/verilog/eth_macstatus.v
37 Link in the header changed. mohor 8121d 12h /ethmac/trunk/rtl/verilog/eth_macstatus.v
22 eth_timescale.v changed to timescale.v This is done because of the
simulation of the few cores in a one joined project.		 mohor 8217d 14h /ethmac/trunk/rtl/verilog/eth_macstatus.v
18 Few little NCSIM warnings fixed. mohor 8255d 08h /ethmac/trunk/rtl/verilog/eth_macstatus.v
15 A define FPGA added to select between Artisan RAM (for ASIC) and Block Ram (For Virtex).
Include files fixed to contain no path.
File names and module names changed ta have a eth_ prologue in the name.
File eth_timescale.v is used to define timescale
All pin names on the top module are changed to contain _I, _O or _OE at the end.
Bidirectional signal MDIO is changed to three signals (Mdc_O, Mdi_I, Mdo_O
and Mdo_OE. The bidirectional signal must be created on the top level. This
is done due to the ASIC tools.		 mohor 8291d 08h /ethmac/trunk/rtl/verilog/eth_macstatus.v

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.