OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] - Rev 279

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
279 Underrun test fixed. Many other tests fixed. mohor 7746d 19h /
278 A new bug (entered with previous update) fixed. When abort occured sometimes
data transmission was blocked.		 mohor 7746d 19h /
277 When padding was enabled and crc disabled, frame was not ended correctly. mohor 7746d 19h /
276 Defer indication changed. tadejm 7746d 19h /
275 Fix MTxErr or prevent sending too big frames. mohor 7754d 00h /
274 Backup version. Not fully working. tadejm 7754d 13h /
273 This commit was manufactured by cvs2svn to create tag 'rel_15'. 7754d 19h /
272 When control packets were received, they were ignored in some cases. tadejm 7754d 19h /
271 This commit was manufactured by cvs2svn to create tag 'rel_14'. 7755d 21h /
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.		 mohor 7755d 21h /
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 7756d 21h /
268 Release 1.19. Control frame description changed. mohor 7810d 14h /
267 Full duplex control frames tested. mohor 7810d 17h /
266 Flow control test almost finished. mohor 7815d 15h /
265 This commit was manufactured by cvs2svn to create tag 'rel_13'. 7815d 19h /
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.		 mohor 7815d 19h /
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.		 mohor 7816d 07h /
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.		 mohor 7816d 07h /
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.		 mohor 7816d 07h /
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.		 mohor 7816d 19h /
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).		 mohor 7817d 08h /
258 This commit was manufactured by cvs2svn to create tag 'rel_12'. 7817d 09h /
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.		 mohor 7817d 09h /
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.		 mohor 7817d 09h /
255 TPauseRq synchronized to tx_clk. mohor 7817d 09h /
254 Temp version. mohor 7818d 12h /
253 r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. mohor 7818d 15h /
252 Just some updates. tadejm 7818d 15h /
251 When control frame (PAUSE) was sent, status was written in the
eth_wishbone module and both TXB and TXC interrupts were set. Fixed.
Only TXC interrupt is set.		 mohor 7818d 15h /
250 AddressMiss status is connecting to the Rx BD. AddressMiss is identifying
that a frame was received because of the promiscous mode.		 mohor 7818d 15h /

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.