OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [branches/] [rc-1.0/] - Rev 121

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
121 Asserting svn:executable properties of modelsim/*.bat scripts.

Including corrected patch for advanced debug system watchpoints under utils/setup. Configure script updated to use this instead of advanced debug system patches. This will remain so until the patch is corrected. The previous line still has the correct command.
rfajardo 4526d 15h /minsoc/branches/rc-1.0/
120 ethmac.prj: a file was missing rfajardo 4526d 18h /minsoc/branches/rc-1.0/
119 Tricking Subversion to accept bat files that are now executable. rfajardo 4526d 18h /minsoc/branches/rc-1.0/
118 Configure scripts for Xilinx devices updated. All of them require to update or1200_defines.v. The non-standard part uses now the variable $BOARD to print that this board require non-standard update of files. rfajardo 4526d 18h /minsoc/branches/rc-1.0/
117 spartan3e_starter_kit designs require DUALPORT from or1200_defines.v to be active instead of GENERIC. rfajardo 4526d 19h /minsoc/branches/rc-1.0/
116 Configure scripts were trying to copy/patch projects files before creating them. Ordering is correct now. rfajardo 4526d 20h /minsoc/branches/rc-1.0/
115 configure.sh script dir aware.
minsoc-install.sh logging to script dir.
rfajardo 4526d 20h /minsoc/branches/rc-1.0/
114 Installation and Configuration scripts can be run out of any directory.
They assume they are going to process the files and directories found in the directory they are run from.
rfajardo 4526d 21h /minsoc/branches/rc-1.0/
113 minsoc-install.sh & minsoc-configure.sh:
-aware of location of configure.sh script
configure.sh:
-does not block on patch error

spartan3e_starter_kit & spartan3e_starter_kit_eth:
-or1200_defines.v updated

prj:
-src/blackboxes/or1200_top.v adjusted to or1200_rel1
-Makefile had a typo regarding altera vhdl files
rfajardo 4526d 21h /minsoc/branches/rc-1.0/
112 Updating installation & configuration scripts. rfajardo 4527d 12h /minsoc/branches/rc-1.0/
111 minsoc-install.sh: DIR_TO_INSTALL is required before using beautify.sh rfajardo 4527d 13h /minsoc/branches/rc-1.0/
110 Fixing several minor issues with the system:
-minsoc-install splitted into installation and configuration
-minsoc-configure.sh can be used to configure a fresh checked out system
-configure script used by both minsoc-configure.sh and minsoc-install.sh to configure

-rtl/verilog: svn externals fixed
-or1200 rolled back to release-1.0

-prj/scripts:
-Makefile has been used by simulation to differentiate project definition of vhdl and verilog files
-Altera was differentiating it in script
-now there are two scripts, one for vhdl and another for verilog. The differentiation occurs in Makefile as for simulation.
-altera_3c25_board/configure scripts had to be updated, vprj and vhdprj file extensions used to differentiate Verilog and VHDL project files.

-prj/src: or1200_top.prj downdated to definition of or1200_v1
rfajardo 4527d 13h /minsoc/branches/rc-1.0/
109 Creating a branche for release candidate 1.0. rfajardo 4527d 15h /minsoc/branches/rc-1.0/
108 Scripts updates to correct paths when working under Windows. Now, ModelSim, Xilinx and Altera synthesis are working on Windows through batch files.

Icarus Verilog and Altera synthesis are working as well. Job done!
rfajardo 4527d 18h /minsoc/trunk/
107 Adding setup batch script for Altera synthesis on Windows.

prj/scripts/altprj.sh has now to check if it is run from cygwin in order to re-formulate the path to windows system.

Maybe the other scripts have to be updated too. This will be checked soon.
rfajardo 4527d 21h /minsoc/trunk/
106 Installation script was checking the ENV variable before setting it. rfajardo 4528d 00h /minsoc/trunk/
105 Updating configure scripts to copy Windows synthesis launch script setup.bat from either minsoc/syn/altera or minsoc/syn/xilinx to minsoc/syn. rfajardo 4528d 01h /minsoc/trunk/
104 Enabling modelsim simulation for current project definition.
vhdl and verilog projects have to be separated:
-prj/Makefile defines VHDL_PROJECTS and VERILOG_PROJECTS, they are merged into PROJECTS. Tools which don't care about VHDL or Verilog use PROJECTS list while other tools use VERILOG_ or VHDL_PROJECTS.
-Simulation uses VHDL_PROJECTS and VERILOG_PROJECTS independently.
-prj/scripts/simprj.sh splitted in:
-simvhdl.sh
-simverilog.sh
(they generate the input files in the right format for simulation tools)
rfajardo 4535d 00h /minsoc/trunk/
103 But the file is called gdb-6.8a.tar.bz2, so tar must be run on that name. rfajardo 4537d 15h /minsoc/trunk/
102 GNU GDB FTP has renamed gdb-6.8 package to gdb-6.8a package. Uncompressed it remains gdb-6.8, so no other changes to script are necessary. rfajardo 4537d 15h /minsoc/trunk/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.