OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [branches/] [rc-1.0/] [backend/] [std/] - Rev 147

Rev

Filtering Options

Clear current filter

Rev Log message Author Age Path
147 Updating minsoc_bench.v to correctly acquire uart data.

Uart drivers: when an end of line character was sent, the driver appended a carriage return to it. This is not necessary and has been removed.
-Eth and Uart firmwares also had a carriage return after the end of line, also removed.

Minsoc_bench_defines.v: Renaming VCD_OUTPUT define to WAVEFORM_OUTPUT

run_bench: selecting -lxt2 for waveform output format. This output format size is 10 times smaller than vcd.

minsoc-install.sh: lxt2 output format requires that Icarus Verilog be installed with zlib support. For that, we now check if zlib is supported on script run.
rfajardo 4701d 04h /minsoc/branches/rc-1.0/backend/std/
143 Compiling firmwares in board configuration scripts instead of on global minsoc setup. rfajardo 4702d 05h /minsoc/branches/rc-1.0/backend/std/
124 Removing Verilog delays from minsoc_bench.v. minsoc_bench_defines.v defines now if uart or ethernet have to be tested. If yes, it checks the behavior of the enclosed firmwares. If not, simulation simply runs forever. rfajardo 4722d 01h /minsoc/branches/rc-1.0/backend/std/
116 Configure scripts were trying to copy/patch projects files before creating them. Ordering is correct now. rfajardo 4728d 02h /minsoc/branches/rc-1.0/backend/std/
109 Creating a branche for release candidate 1.0. rfajardo 4728d 21h /minsoc/branches/rc-1.0/backend/std/
105 Updating configure scripts to copy Windows synthesis launch script setup.bat from either minsoc/syn/altera or minsoc/syn/xilinx to minsoc/syn. rfajardo 4729d 07h /minsoc/branches/rc-1.0/backend/std/
97 As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. rfajardo 4773d 08h /minsoc/branches/rc-1.0/backend/std/
87 Synchronizing scripts to behave exactly the same. rfajardo 4779d 01h /minsoc/branches/rc-1.0/backend/std/
85 Central project definition under prj. Synthesis and simulation take their project files from here. rfajardo 4779d 01h /minsoc/branches/rc-1.0/backend/std/
80 Establishing a better Makefile system for firmwares. rfajardo 4797d 05h /minsoc/branches/rc-1.0/backend/std/
70 Including a global timescale under minsoc/rtl/verilog to control simulation. It is under the implementation because the implementation files include it.

Removing timescale definition of minsoc_bench_defines.v files.

Creating a modelsim simulation directory. Everything is working under Linux. For Windows, run_sim.sh has to be changed:
-pli ../../bench/verilog/vpi/jp-io-vpi.so
to:
-pli ../../bench/verilog/vpi/jp-io-vpi.dll

These files have to be compiled/copied from minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge/sim_lib/modelsim_platform to minsoc/bench/verilog/vpi.
rfajardo 4898d 06h /minsoc/branches/rc-1.0/backend/std/
69 backend update:
-minsoc_bench_defines.v
-gcc-opt.mk
Both files should now be under minsoc/backend to proper system functionality.
backend subdirectories have been given those files. Configure script updated accordingly.

They are searched there from system scripts and Makefiles.
-sim/bin/minsoc_verilog_files.txt has the files for Icarus Verilog, minsoc_bench_defines.v is now referenced from backend directory.
-sw/support/Makefile.inc now references to gcc-opt.mk inside backend.

backend/spartan3e_starter_kit_eth:
-It is the system configuration for Spartan 3E Starter Kit with Ethernet.
rfajardo 4902d 22h /minsoc/branches/rc-1.0/backend/std/
65 Files missing in the last commit.
backend/std/configure
sw: eth, uart and driver Makefiles
rfajardo 4905d 04h /minsoc/branches/rc-1.0/backend/std/
64 firmware makefiles:
-every firmware makefile has now complete dependency. This also includes dependency on files under minsoc/backend (target specific files). That means, that if some target specific header changes, the support library dependent on it will be compiled. That will always happen, even if you compile the uart firmware. In other words, if you want to use uart firmware, you can always simply compile uart by issuing make all. If anything has changed, backend files, support library, drivers, it will update everything for you.
-TODO: dependency can be automatic created by using make together with gcc. Use it instead of declaring all dependencies manually.

Makefile system for synthesis:
-the dependency for every implementation step has been checked and is working fine.
-Makefile plus support files have been moved to minsoc/syn/src
-make usage is still under syn through files generated by backend bashscripts
Backend:
-files under backend are target specific files used for the system to work
-firmware compilation
-system simulation
-system implementation
-This directory is populated by visiting one of its subdirectories and typing ./configure

backend/spartan3a_dsp_kit:
-working on FPGA

backend/spartan3e_starter_kit:
-has to be tested

backend/ml509:
-missing files have to be copied and adapted, configure script has to be copied and adapted

backend/std:
-include files necessary for firmware compilation and system configuration
-it does not include files for synthesis and is not synthesizable
rfajardo 4905d 05h /minsoc/branches/rc-1.0/backend/std/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.