Rev |
Log message |
Author |
Age |
Path |
113 |
minsoc-install.sh & minsoc-configure.sh:
-aware of location of configure.sh script
configure.sh:
-does not block on patch error
spartan3e_starter_kit & spartan3e_starter_kit_eth:
-or1200_defines.v updated
prj:
-src/blackboxes/or1200_top.v adjusted to or1200_rel1
-Makefile had a typo regarding altera vhdl files |
rfajardo |
4537d 00h |
/minsoc/branches/verilator |
112 |
Updating installation & configuration scripts. |
rfajardo |
4537d 15h |
/minsoc/branches/verilator |
111 |
minsoc-install.sh: DIR_TO_INSTALL is required before using beautify.sh |
rfajardo |
4537d 16h |
/minsoc/branches/verilator |
110 |
Fixing several minor issues with the system:
-minsoc-install splitted into installation and configuration
-minsoc-configure.sh can be used to configure a fresh checked out system
-configure script used by both minsoc-configure.sh and minsoc-install.sh to configure
-rtl/verilog: svn externals fixed
-or1200 rolled back to release-1.0
-prj/scripts:
-Makefile has been used by simulation to differentiate project definition of vhdl and verilog files
-Altera was differentiating it in script
-now there are two scripts, one for vhdl and another for verilog. The differentiation occurs in Makefile as for simulation.
-altera_3c25_board/configure scripts had to be updated, vprj and vhdprj file extensions used to differentiate Verilog and VHDL project files.
-prj/src: or1200_top.prj downdated to definition of or1200_v1 |
rfajardo |
4537d 16h |
/minsoc/branches/verilator |
109 |
Creating a branche for release candidate 1.0. |
rfajardo |
4537d 18h |
/minsoc/branches/verilator |
108 |
Scripts updates to correct paths when working under Windows. Now, ModelSim, Xilinx and Altera synthesis are working on Windows through batch files.
Icarus Verilog and Altera synthesis are working as well. Job done! |
rfajardo |
4537d 21h |
/minsoc/branches/verilator |
107 |
Adding setup batch script for Altera synthesis on Windows.
prj/scripts/altprj.sh has now to check if it is run from cygwin in order to re-formulate the path to windows system.
Maybe the other scripts have to be updated too. This will be checked soon. |
rfajardo |
4538d 00h |
/minsoc/branches/verilator |
106 |
Installation script was checking the ENV variable before setting it. |
rfajardo |
4538d 03h |
/minsoc/branches/verilator |
105 |
Updating configure scripts to copy Windows synthesis launch script setup.bat from either minsoc/syn/altera or minsoc/syn/xilinx to minsoc/syn. |
rfajardo |
4538d 05h |
/minsoc/branches/verilator |
104 |
Enabling modelsim simulation for current project definition.
vhdl and verilog projects have to be separated:
-prj/Makefile defines VHDL_PROJECTS and VERILOG_PROJECTS, they are merged into PROJECTS. Tools which don't care about VHDL or Verilog use PROJECTS list while other tools use VERILOG_ or VHDL_PROJECTS.
-Simulation uses VHDL_PROJECTS and VERILOG_PROJECTS independently.
-prj/scripts/simprj.sh splitted in:
-simvhdl.sh
-simverilog.sh
(they generate the input files in the right format for simulation tools) |
rfajardo |
4545d 04h |
/minsoc/branches/verilator |
103 |
But the file is called gdb-6.8a.tar.bz2, so tar must be run on that name. |
rfajardo |
4547d 19h |
/minsoc/branches/verilator |
102 |
GNU GDB FTP has renamed gdb-6.8 package to gdb-6.8a package. Uncompressed it remains gdb-6.8, so no other changes to script are necessary. |
rfajardo |
4547d 19h |
/minsoc/branches/verilator |
101 |
Documentation, wiki's address updated. |
rfajardo |
4573d 07h |
/minsoc/branches/verilator |
100 |
syn/altera/minsoc_top.qsf: I thought this file was being generated now as project file description. But it is merely a synthesis configuration file and must be here. File re-added. |
rfajardo |
4582d 05h |
/minsoc/branches/verilator |
99 |
backend/altera_3c25_board/minsoc_defines.v: if GENERIC_FPGA selected, undefine ALTERA_FPGA and FPGA_FAMILY to avoid vendor specific code to flow into the simulation. If you don't do it, generate_bench fails. |
rfajardo |
4582d 05h |
/minsoc/branches/verilator |
98 |
Removing deprecated minsoc_top.qsf file. |
rfajardo |
4582d 05h |
/minsoc/branches/verilator |
97 |
As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. |
rfajardo |
4582d 05h |
/minsoc/branches/verilator |
96 |
Some files needed for Altera synthesis |
javieralso |
4582d 16h |
/minsoc/branches/verilator |
95 |
Makefile for Altera FPGAs fixed |
javieralso |
4583d 19h |
/minsoc/branches/verilator |
94 |
Fix bug in minsoc_top.prj for Altera synthesis |
javieralso |
4586d 04h |
/minsoc/branches/verilator |