Rev |
Log message |
Author |
Age |
Path |
151 |
Creating tag release-1.0 from revision 150 of branches/rc-1.0. |
rfajardo |
4724d 01h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
147 |
Updating minsoc_bench.v to correctly acquire uart data.
Uart drivers: when an end of line character was sent, the driver appended a carriage return to it. This is not necessary and has been removed.
-Eth and Uart firmwares also had a carriage return after the end of line, also removed.
Minsoc_bench_defines.v: Renaming VCD_OUTPUT define to WAVEFORM_OUTPUT
run_bench: selecting -lxt2 for waveform output format. This output format size is 10 times smaller than vcd.
minsoc-install.sh: lxt2 output format requires that Icarus Verilog be installed with zlib support. For that, we now check if zlib is supported on script run. |
rfajardo |
4729d 00h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
143 |
Compiling firmwares in board configuration scripts instead of on global minsoc setup. |
rfajardo |
4730d 01h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
124 |
Removing Verilog delays from minsoc_bench.v. minsoc_bench_defines.v defines now if uart or ethernet have to be tested. If yes, it checks the behavior of the enclosed firmwares. If not, simulation simply runs forever. |
rfajardo |
4749d 21h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
118 |
Configure scripts for Xilinx devices updated. All of them require to update or1200_defines.v. The non-standard part uses now the variable $BOARD to print that this board require non-standard update of files. |
rfajardo |
4755d 20h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
117 |
spartan3e_starter_kit designs require DUALPORT from or1200_defines.v to be active instead of GENERIC. |
rfajardo |
4755d 21h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
116 |
Configure scripts were trying to copy/patch projects files before creating them. Ordering is correct now. |
rfajardo |
4755d 21h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
113 |
minsoc-install.sh & minsoc-configure.sh:
-aware of location of configure.sh script
configure.sh:
-does not block on patch error
spartan3e_starter_kit & spartan3e_starter_kit_eth:
-or1200_defines.v updated
prj:
-src/blackboxes/or1200_top.v adjusted to or1200_rel1
-Makefile had a typo regarding altera vhdl files |
rfajardo |
4755d 22h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
109 |
Creating a branche for release candidate 1.0. |
rfajardo |
4756d 16h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
105 |
Updating configure scripts to copy Windows synthesis launch script setup.bat from either minsoc/syn/altera or minsoc/syn/xilinx to minsoc/syn. |
rfajardo |
4757d 03h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
97 |
As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. |
rfajardo |
4801d 03h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
92 |
backend/spartan3e_starter_kit*: or1200_defines.v file was outdated and hindering synthesis. Probably it would be best if we used a patching system here. But for now, I copied the new files and made the necessary changes to fit the system into the target boards. |
rfajardo |
4806d 03h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
88 |
Project structure, Xilinx Makefiles and simulation working. |
rfajardo |
4806d 19h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
87 |
Synchronizing scripts to behave exactly the same. |
rfajardo |
4806d 20h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
86 |
Updating configure script messages. |
rfajardo |
4806d 20h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
85 |
Central project definition under prj. Synthesis and simulation take their project files from here. |
rfajardo |
4806d 21h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
80 |
Establishing a better Makefile system for firmwares. |
rfajardo |
4825d 01h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
70 |
Including a global timescale under minsoc/rtl/verilog to control simulation. It is under the implementation because the implementation files include it.
Removing timescale definition of minsoc_bench_defines.v files.
Creating a modelsim simulation directory. Everything is working under Linux. For Windows, run_sim.sh has to be changed:
-pli ../../bench/verilog/vpi/jp-io-vpi.so
to:
-pli ../../bench/verilog/vpi/jp-io-vpi.dll
These files have to be compiled/copied from minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge/sim_lib/modelsim_platform to minsoc/bench/verilog/vpi. |
rfajardo |
4926d 02h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
69 |
backend update:
-minsoc_bench_defines.v
-gcc-opt.mk
Both files should now be under minsoc/backend to proper system functionality.
backend subdirectories have been given those files. Configure script updated accordingly.
They are searched there from system scripts and Makefiles.
-sim/bin/minsoc_verilog_files.txt has the files for Icarus Verilog, minsoc_bench_defines.v is now referenced from backend directory.
-sw/support/Makefile.inc now references to gcc-opt.mk inside backend.
backend/spartan3e_starter_kit_eth:
-It is the system configuration for Spartan 3E Starter Kit with Ethernet. |
rfajardo |
4930d 18h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |
66 |
spartan3e_starter_kit requires special configuration of or1200_r3.
For that, configure script was specially adapted and that is reported on script execution.
For release-1.0 of MinSoC this should not be required, because or1200_r1 already has the
required configuration. |
rfajardo |
4932d 22h |
/minsoc/tags/release-1.0/backend/spartan3e_starter_kit |