OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [trunk/] - Rev 55

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
55 Adjusting Makefiles to compile correctly with new firmware updates.

1) except.o not included into libsupport.a.
2) libsupport.a linked to except.o, now in correct order: ld libsupport.a except.o -o executable (not the other way around)
3) int.c was not being compiled because of a #ifdef which is not set anywhere
rfajardo 4726d 23h /minsoc/trunk
54 Moving spr_defs.h to or1200.h ConX. 4727d 01h /minsoc/trunk
53 Indentation, deleting redundant files and adding externals ConX. 4727d 02h /minsoc/trunk
52 Altera ALTPLL Megafunction Instantiation javieralso 4735d 16h /minsoc/trunk
51 sw/support/uart.c: Changing the order of writes to the Divisor Latch of UART. (Thanks Ramkumar) rfajardo 4742d 05h /minsoc/trunk
50 Removing unused firmware files, respective to or1ksim actually.

Removing the inclusion of the removed file mc.h in reset.S, probably required by or1ksim at some point.

Reworked except.S to use a macro instead of repeating the same procedure 16 times or so. Explanation added to the macro as a leading comment.
rfajardo 4754d 01h /minsoc/trunk
49 Language correction for README.txt. rfajardo 4755d 23h /minsoc/trunk
48 Clear some old docs that are already ported to MinSOC's Wiki ConX. 4756d 00h /minsoc/trunk
47 Firmware updated to work with gcc-4.5. It is actually working just fine and gcc-4.5 assembly code seems a lot cleaner.

I noticed that by increasing the free stack space for the interrupt handler by 130 made the resulting firmware not work. I assume it is because 130 is not aligned 130%4 = 2 and the stack simply does not work then. Instead I'm freeing the previous 116 plus 128 (for 32 registers as mentioned by Jeremy) and it works.
rfajardo 4756d 22h /minsoc/trunk
46 Including an explanation of what has to be updated on gpio to port it smoothly to minsoc. rfajardo 4757d 03h /minsoc/trunk
45 A more stable version ConX. 4757d 18h /minsoc/trunk
44 Fixing some bugs. But it still works only in Debian/Ubuntu ConX. 4757d 19h /minsoc/trunk
43 Making some changes to MinSOC install script ConX. 4758d 16h /minsoc/trunk
41 Including setup scripts to install all required tools to work with minsoc and to download all required sources. Thanks for the contribution of Xanthopoulos Constantinos. rfajardo 4762d 23h /minsoc/trunk
40 Commiting a contributions directory, which has raw contributions of users. These contributions still have to be adapted to the system in order to work well. However, some users are certainly able to work with these versions.

FAQ: -added new idea to circumvent onboard DLC9 cable problem for adv_jtag_bridge
INSTALL: -gives a hint on how to install the system for Windows
HOWTO: -explains what a ucf file is and how to create it

backend: now we have the first contribution of a ucf file for the ML509 board (thanks to Matthew Hick)

Documentation: THESIS.txt explains to users, willing to tweak/understand the inner behavior of the OR1200 implementation of OpenRISC, what to read in order to get this information.
rfajardo 4768d 21h /minsoc/trunk
39 FAQ:
-Adv_jtag_bridge self test fails?
-included now SoC flow mistakes
-forgetting to upload the bitfile
-leaving clock unconnected
-older information is now under "Known Issues" right below of SoC flow mistakes

Software:
-eth: included eth.h is from drivers and not from this directory. eth.h from this directory is old and has been removed.
-uart: included uart.h is from drivers and not from this directory. uart.h from this directory is old and has been removed.
rfajardo 4833d 14h /minsoc/trunk
38 Small update to HOWTO: advices now to also include the ucf (pinout) file, for forgetful people :-).

FAQ: Added another option (hint) as a solution for people with on-board Xilinx USB cables, which do not reset.

uart.c: now uses the IRQ line definition instead of the line number directly.
rfajardo 4868d 13h /minsoc/trunk
37 README.txt added, describing the installation and set-up processes. Also describing to use the FAQ or forum when you have problems and finally to read minsoc.pdf (the documentation) to understand the system after everything works, to know what to do next.

Clean-up of sw/utils, removing unused sources and files.

Update of sw/drivers/eth.c, direct casting to avoid compile warnings.

FAQ extended and with more links to the threads giving the solutions.

Synthesis examples inform that the firmware tweak for Spartan3E Starter Kit using Ethernet only works for system version up to 35.

minsoc.pdf and webpage now uses FPGA generic and specific codes instead of FPGA independent and dependent codes, because it suits it better.
rfajardo 4899d 00h /minsoc/trunk
36 utils: -adding a 32 to 8 bit Wishbone bridge to connect 8 bit modules to the MinSoC interconnect.
-adding a Linux driver for parallel cables for the adv_jtag_bridge. It circumvents the necessity of privilege to run adv_jtag_bridge with cables xpc3 and xess.

sw/support: support library has been made completely standalone. That means, it is now independent from uClib and/or newlib. Thanks to Wojciech A. Koszek for his contribution on this.

sw/drivers: a driver library has been included, which supply drivers for the OpenRISC timer; and for UART, Ethernet, I2C, and CAN modules from OpenCores.

sw/uart and sw/eth: they don't provide code to control the UART and Ethernet controllers anymore. They use the drivers library instead.

Documentation:
-FAQ extended:
-table of contents
-explanation of how to use the 32 to 8 bit Wishbone bridge
-how to make adv_jtag_bridge work without privilege requirement for xess or xpc3
-explanation of locking problem of xpc_usb cable
-explanation of what to do if the cable is built on-board
-INSTALL:
-patching of gdb only required if version is 6.8, explanation on FAQ now.
-HOWTO:
-instruct to compile drivers library
-remove line numbers information on what to edit, better leave it to be found only by the informed context.
-adv_jtag_bridge execution now without 'sudo'. Note included that 'sudo' is required for Linux and xess or xpc3. Reference to FAQ to avoid this requirement.
rfajardo 4899d 20h /minsoc/trunk
35 minsoc.pdf: -adjusting the date on the page header of MinSoC documentation. It was correct on the front and revision pages, now header adjusted accordingly. rfajardo 4904d 14h /minsoc/trunk

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.