OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [trunk/] [backend/] [spartan3e_starter_kit_eth/] - Rev 164

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
158 Adding de2_115_board port, thanks to Richard Hasha.

Support to JSP (JTAG Serial Port) working well. Also provided by Richard Hasha.

Different interconnect configurations per board are not straightforward on MinSoC. New added modules or definitions for addresses have to be carried over to other boards. Furthermore, extra modules can be shared among all projects. Thus, it is better to have this centralized:
-Removing interconnect configuration from minsoc_defines.v. There is an interconnect_defines.v file on rtl/verilog. The software counterpart is interconnect.h on sw/drivers.

Including a jsp firmware. It is basically the uart firmware but using JSP instead. Added to all board configure scripts to be compiled on configuration.

prj/srcs extended to include jsp and interconnec_defines.v.

spartan3e_starter_kit_eth lost UART (does not fit) and uses JSP instead now.
rfajardo 4466d 03h /minsoc/trunk/backend/spartan3e_starter_kit_eth/
144 Updating configure scripts. Calling make into the right directories now. rfajardo 4510d 12h /minsoc/trunk/backend/spartan3e_starter_kit_eth/
142 Updating configure.sh:
1) we don't patch the trunk version.
2) it is better to re-compile the firmwares on reconfiguration. So compiling firmwares went to configure scripts instead.

backend/xxx/configure: compiling firmwares here now.
rfajardo 4510d 12h /minsoc/trunk/backend/spartan3e_starter_kit_eth/
141 Merging with rc-1.0 revision 140. I doubt rc-1.0 will still change much in the last days. rfajardo 4510d 12h /minsoc/trunk/backend/spartan3e_starter_kit_eth/
105 Updating configure scripts to copy Windows synthesis launch script setup.bat from either minsoc/syn/altera or minsoc/syn/xilinx to minsoc/syn. rfajardo 4537d 14h /minsoc/trunk/backend/spartan3e_starter_kit_eth/
97 As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. rfajardo 4581d 14h /minsoc/trunk/backend/spartan3e_starter_kit_eth/
92 backend/spartan3e_starter_kit*: or1200_defines.v file was outdated and hindering synthesis. Probably it would be best if we used a patching system here. But for now, I copied the new files and made the necessary changes to fit the system into the target boards. rfajardo 4586d 13h /minsoc/trunk/backend/spartan3e_starter_kit_eth/
88 Project structure, Xilinx Makefiles and simulation working. rfajardo 4587d 06h /minsoc/trunk/backend/spartan3e_starter_kit_eth/
87 Synchronizing scripts to behave exactly the same. rfajardo 4587d 07h /minsoc/trunk/backend/spartan3e_starter_kit_eth/
86 Updating configure script messages. rfajardo 4587d 07h /minsoc/trunk/backend/spartan3e_starter_kit_eth/
85 Central project definition under prj. Synthesis and simulation take their project files from here. rfajardo 4587d 07h /minsoc/trunk/backend/spartan3e_starter_kit_eth/
80 Establishing a better Makefile system for firmwares. rfajardo 4605d 12h /minsoc/trunk/backend/spartan3e_starter_kit_eth/
70 Including a global timescale under minsoc/rtl/verilog to control simulation. It is under the implementation because the implementation files include it.

Removing timescale definition of minsoc_bench_defines.v files.

Creating a modelsim simulation directory. Everything is working under Linux. For Windows, run_sim.sh has to be changed:
-pli ../../bench/verilog/vpi/jp-io-vpi.so
to:
-pli ../../bench/verilog/vpi/jp-io-vpi.dll

These files have to be compiled/copied from minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge/sim_lib/modelsim_platform to minsoc/bench/verilog/vpi.
rfajardo 4706d 13h /minsoc/trunk/backend/spartan3e_starter_kit_eth/
69 backend update:
-minsoc_bench_defines.v
-gcc-opt.mk
Both files should now be under minsoc/backend to proper system functionality.
backend subdirectories have been given those files. Configure script updated accordingly.

They are searched there from system scripts and Makefiles.
-sim/bin/minsoc_verilog_files.txt has the files for Icarus Verilog, minsoc_bench_defines.v is now referenced from backend directory.
-sw/support/Makefile.inc now references to gcc-opt.mk inside backend.

backend/spartan3e_starter_kit_eth:
-It is the system configuration for Spartan 3E Starter Kit with Ethernet.
rfajardo 4711d 05h /minsoc/trunk/backend/spartan3e_starter_kit_eth/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.